667 modeli
I was not satisfied with other seed pod designs for Aerogarden, so I designed my own. The spiral structure is designed to be sturdy for printing without any supports - very low risk of spaghetti as it prints. It fits these seed starter…
Wydruk około 1,07 €–1,30 € nettoWstępna wycena jednego wariantu
After having some other 3d printed deck boxes fail on me after using them for a while, I decided to make one that should hopefully hold up to extensive use. The space for cards is roughly the same as an Ultra Pro Satin Tower, and the…
Wydruk około 5,26 €–6,43 € nettoWstępna wycena jednego wariantu
While checking out the Fuse 1 from Formlabs, I spotted that they offered a variety of sample prints done on the machine to check out the quality for no cost and no shipping. After evaluating the nylon 12 case linked below, you can make…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
This Sturdy Paper Roll Holder can be mounted on a Wall or mounted on a Table. OnShape Link:…
Wydruk około 5,57 €–6,81 € nettoWstępna wycena jednego wariantu
A 100% 3D printed Smartphone-holder-arm that offers, at least, three axes. And the option of double braces between the axes. In the standard configuration, the arm easily supports around 500 grams in any position. The versatility of this…
I needed something like a panel-latch for a not-a-voron. I was using RichardM's Voron 2.4 Filament Latch on my Voron. I thought about modding his for my purpose, but decided to re-implement it myself and make some improvements. Heavily…
It is a system that helps to keep the soil moist wherever it is needed in a flower bed, garden or flower pot. Tested with a 1.5-liter bottle of mineral water, it lasts up to 4 days, but all standard bottles are suitable, I recommend…
Building this awesome 🤩 Open Ball vise and the XL Base and having the Fusion file at hand 👌 I felt I needed to improve the very few things that were not perfect for me 😎: Give it a 3-point stand so it's 100% wobble free on the desk 👍…
Large metric 16cm version of the Mushroom Shelves. Scale to your liking. The newly designed bracket is printed in place (upside-down) and will scale with the individual shelf model. Design #5 and #6 have been added in this remix Update!…
Infinity cube with strong hinges that won't break easily. This cube is designed with a lot of slack, so that it moves freely. I designed this after having several fails with other models, where the hinges would break when trying to loosen…
Inspired by sns13s toothpaste tube squeezer on Thingiverse, I created my own version of a tube sqeezer which is more sturdy and easy printable. I liked the exlicit lock of sns13s design (much better and more reliable than printed ratchet…
A sturdy soap box which makes use of a fun curvy shape to create raised interior rails for the soap to sit on for quicker drying , and includes a strong built-in latch to help secure the case closed when you're ready to travel. Three…
Very sturdy, carries soap or multiple shampoo bottles. Fits 18, 20, 22, 25 and 28 mm shower rails. Easy to print and easy to mount. Update 2023-01-03: I have added a variant for shower rails with a diameter of 28 millimeters. Update…
Easy print, no supports required.
Modern, Lightweight, and Sturdy Pull-Handle Set Introducing our versatile pull-handle set, perfect for anyone seeking a durable and stylish solution for their home, office, or project. Designed with a modern industrial look, these handles…
16cm x 8cm small shelf panel for IKEA Skadis board. The fixture is snug fit providing a very sturdy platform for displaying small objects. A small bump is added in the middle for extra security. The panels can be placed side by side.…
Very sturdy, carries soap or multiple shampoo bottles. Unlike my other designs, this dish is fixed on the back. Fits 18, 20, 22 and 25mm shower rails. Versions for left and right mounting available. Easy to print and easy to mount. Update…
Designed to fit 'KONIZY' refills from Amazon , which are 100mm long, with an opening that is 38mm wide. I believe this means it will fit most standard refills, Ikea and most Scotch-brite included, though I would measure first. (EDIT: It…
This was a remixed model to be much stronger and host a varitey of sizes to accomadate many diffrent uses. They print in three peices then the end cap snaps into the threaded rod. Each clamp is posted indivisualy as well.
Hallo liebe 3D-Druckfreunde und Centauri Carbon Fans! Bei meinem Elegoo Centauri Carbon wollte ich mehr Platz zwischen Druckkopf und Glasabdeckung bekommen. Die im Internet kursierenden Erhöhungen waren mir ein wenig zu niedrig, kosteten…
2020 Heavy Duty Sturdy Door Handle Overall dimensions: 20x45x140mm Suitable for:
Pictured is Overture neon green silk PLA with 0.2mm layer height. Just print all three pieces and glue together. The hollow shell design of the plumbob is lightweight but reinforced in the area that attaches to the clip. Perfect for Sims…
This is a small but sturdy latch that can be printed in place. It has a flat surface for your printing pleasure. No supports, no rafts, no brim. Just the way we like it. This kind of latch is typically called tension latch, toggle latch,…
I plan to update this model with alternative versions, cad is available as is step but uses a feature in the timeline for the geometric pattern that will not be editable for most users. Uses standard #10 construction screws (probably 3.5…
These pencil/pen pots are designed using helical, hexagonal, spherical, and spiral patterns and geometries. The aim was to produce pencil/pen pots with a modern aesthetic and serve as functional art on a maker's desk! For each design…
Remix of ‘Chicken waterer using PET bottle’ by kkwsiu adding a sturdier base and elevated water level. Our delightful and hilarious rescue chook Harriet has anarchistic tendencies when it comes to her love of knocking/tipping/pushing…
Are your headphones sitting on the floor right now? Are they cluttering up your desk? Do you have too many headphones and don't know where to put them all? No more shall your headphones be treated with such disrespect! Treat them right…
A sturdy buckle replacement for 26mm straps. I printed it in PLA with 6 walls (so it's basically a solid piece)
The original screws were printed vertically. After using the original screws for a few months, it started to split at the layer lines, so I decided to make these screws, that you can print horizontally on the bed, which also gave it an…
8cm x 8cm small shelf panel for IKEA Skadis board. The fixture is snug fit providing a very sturdy platform for displaying small objects. A small bump is added in the middle for extra security. The panels can be placed side by side.…
I wanted a simple sturdy hook that would sit flush to the wall even if using hardware that sits a little proud. e.g. A Rawl plug or plasterboard/dry wall fitting. The recess in the back is 1mm deep and 14mm in diameter. Print at about 20%…
Simple & Sturdy Dust Pan
In the process of ‘ruggedizing’ my Ender 3 I realised I was going to need some wickedly strong brackets to keep it stiff and square. Not finding anything that really looked the way I liked, and inspired by these great-looking (but…
Looking for a solution to get better sound on my Meta Quest (previously known as Oculus Quest), I stumbled upon this design by budgiesarecool . I already had some Koss Porta Pros so I printed it and used that for a couple of weeks (after…
This is a robust Bookend (or Book Holder/Stop) designed to organize your shelves and keep your collection upright. Unlike decorative bookends that might snap under pressure, this model is engineered for utility and strength. It features a…
Hi. This is my gaming chopstick model. It's long, thick, strong, and grippy. I made it in Fusion 360. Thanks! I am new to 3D printing. My print profile is on Makerworld.com, but it contains 2 plates with 2 sizes, and I added a small .1mm…
A durable, universal bike handle mount designed to fit all standard handlebars. Reinforced to support the weight of e-bikes, cargo bikes, or even dirt bikes (if mounted upside down). It’s easy to print: only requires support between the…
professional panning pan for gold and mineral prospecting.
I created a sturdy mount for iPhone SE to mount a smartphone to a MTB while shredding the trails. The phone can be used for directions from a downloaded GPX file. All buttons are accessible and the speaker can still be heard. The mount is…
Arm of 17 cm for https://www.printables.com/es/model/647794-flexible-sturdy-phone-arm-100-printed compatible with Prusa MINI.
I wanted to have a shorter arm length and maximize the Prusa Mini's print volume so I shortened the original arm. I printed it with Overture Matte Black PLA with supports on the build plate only.
Elegant and sturdy drawer box with snap closure for Skat and similar playing cards. Please print in the specified orientation, with a layer height of 0.2 mm and a line width of 0.4 mm or more. Do not use a different layer height as the…
The Sunlu S2 is great, except the fact it's base is not very wide and the whole thing tips over a lot. At least mine used to. The 2 piece base screws together and clamps onto the dryer box. You'll need 1 M5x30 screw & 1 M5 nut Insert the…
Designed for 0.4mm nozzle with extrusion width set to 0.6mm. See below for other settings. This container is quite rigid for a vase mode print, partly because having double walls, partly due to the thread pattern, and partly because of…
yet another creality ender 3 display cover. slim-line with robust 1,6mm wall thickness (tied to the base with a large chamfer) and usable with the 4 original screws. if someone wants to design his own cover and has no fun to measure…
FUTURE TASKS Specialized jaws for specific tasks Maybe some kind of fast exchangeable jaws or adapters ------------------------------------------------------- ADD-ONS Connectors jaws great for handling balbulab x1/c/p1p hotend connectors…
EDIT 03/04/2023 Added f3d and STEP files so these can be remixed. __________________________________________________________________________ Designed a system of parts to create a means of mounting the Hadley to a tripod in a very sturdy…
Simple and sturdy tablet stand with a few variations Tablet Stand - Normal Lip For most iPads and other tablets. (Purple print shown in photos) No supports needed Tablet Stand - Deep Lip For thicker tablets and bulky cases No supports…
Cut the thumb grip in half to shorten print time and clean up the look a bit. Printed in Overture Matte Black PLA with no supports on my mini.
Classic design. Can be used in almost any scenario where something that requires a hook. Print on its side for the best strength. You can scale to some extend according to your needs. Holes are d=5mm at the moment.
There wasn't a mount for a tablet, so i created mine. This is specifically made for the ipad pro 10.5, but i added the .f3d file so you can easily modify it to adapt to your tablet dimensions. I suggest you make the arm distance 3 mm…
I have used Thingiverse Shuflie's design to crash several cans, but preferred to go for something more sturdy building upon his model. No artistic elements, just functional. Redesigned based on the original STLs in Fusion 360. Sharing…
A sturdy handle that can be fasten with 2 screws. Distance between holes is 18cm. Prints without supports on its flattened side. I needed it for the lid of an old vacuum cleaner.
TETRAHEDRAL MOUNTING BRACKET - STAFFA TETRAEDRICA Flexible Fixing Grid (Up to 9 Points) | Filament-Optimized Design --- ## 📐 Product Overview - Dimensions: 60mm x 60mm (Base) - Mounting Points: Grid design with up to 9 available fixing…
Sturdy Corner Bracket with Ribbed Reinforcement – Heavy Duty For 2020 / 3030 / 4040 / 5050 V-Slot & T-Slot aluminum profiles Why this model Most commercial corner brackets for aluminum extrusions are either oversized, expensive, or both.…
------------------------------------------------------------------------------------------------- UPGRADED PARTS INCOMING! I've done my own fair share of testing with this part, and I figured a major redesign might improve it a lot:…
Quick demo showcasing the holder: Details: This case is made to fit a chonky “Colgate 360 Sonic Power” electric/vibrating toothbrush - so it should fit most other “normal” type manual toothbrushes as well. After my old toothbrush broke…
This is my design of a box with a lid with intentionally thick walls to be printed with transparent or translucent filament. The walls are 4mm thick, which makes the box very robust, but more importantly, it will look great if you print…
Update: I forgot that the Ender 3 KE has a different spool stand, with an additional part that makes it incompatible with my model. As such, I've updated my model to support the KE stand. Please let me know if it's still incompatible, in…
Model resized to exactely match the original. Thanks for pointing this out (Jeff Noxon) For best results, set the z-hop to 0, set seam position to nearest and use Arachne wall generator. Print time with my Sovol SV08 under 15min Also…
Introducing the Sturdy Dashboard Phone Holder Clip ! No assembly required - just print and use! 🚀 I've crafted this 3D model with simplicity and convenience in mind. Whether you're navigating through bustling city streets or embarking on…
Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…
I've already explained most everything in the “differences between remix and original section”, but this is the result of remixing the original XL phone mount to fit phones with large cases, in my case an iPhone 14 Pro Max with an…
A rugged case for the Raspberry Pi 4B using cutouts of the Prusa filament spool as impact-absorbent guarding without impeding airflow. The centre piece retains the Pi while the top and bottom plates screw on to clamp the spool cutouts in…
This is an updated version of the Sturdy can crusher based on feedback in comments and my own user experience. What is new: Made it taller to allow crushing of sleek cans Added chamfers to holes, bottom and top to avoid cutting edges Got…
Created this sturdy filament dryer guide for Sunlu S1 so that the guide does not move or rotate. There were other filament guides available for Sunlu but they required drilling holes or using screws. This model allows the filament guide…
Sturdy extender for the legs of a Lack table. I would recommend printing with 3+ perimeters, depending what you put on top of the table. The screw holes are 3mm, and I just used standard wood screws. Using higher layer heights makes a…
Intro Winter returns back to the northern hemisphere… Cold days and frosted cars are back… Car owners need a good and stable ice scraper now. And this is exactly what this model delivers! Why you'll love it? Print is done really easy…
Voron 2.4r2/Trident Sturdy handler remix with voron logo on front and back.
UPDATE 11/3: Elegoo has acknowledged the issue and designed a new cable for the printer. If you want an Elegoo supported solution please see this post:…
The buckle of my backpack broke, so I created one that fits. I continued on the existing design by 3DMakerNoob . - Improved the sliding-mechanism. (Both for the buckle as the buckle-holder) - Stronger clips → less flex so less plastic…
A simple pole clamp for the system so I could attach my ring light directly to my desk.. The pole that it currently attaches to is 35mm in diameter. Printed in Overture Matte Black PLA with a raft and supports on the build plate. Hardware…
The texture allowing the arms to connect to each other without rotating began to wear off, so I printed some TPU gaskets that go between the arms connections. The gaskets can hold the arms and stop them from rotating without any lines or…
…Please be sure to hit like & post a make, I'd love to see your prints! NO more Wobbly RPi PSU's on a single clip for you! The stock clip is good but allows the PSU to wobble about way too much! Fix this issue with this super simple but…
Remix of a remix. For use with 10" rack modules. This design is meant to enable one build a low profile server, network or whichever equipment fits in a 10" rack. While idea is to print supporting structures and buy the rack rails to…
Important information before printing This is a print in place desing, and it's specially designed to be printed with specific parameters, so the hinges work properly. Layer heigh: 0.2 You'll need: 2 x M5 x 10 mm flat head screws to put…
this remix is making the arm easier to print with less filament and the base part can move more freely to swing around.
Description This is one of my extra sturdy 10" rack panels, which I originally developed to fit my needs while designing (mobile) racks for my homelab, RF applications, wardriving and education. This is a simple blank panel with hexagonal…
These are the sturdy walls we created for our hexagonal dungeon tiles, these have an irregular stone floor pattern and match the floors we made earlier. There are 2 shapes of walls, just straight and rectangular (from the top) and the one…
I designed this wall shelf to hold the charger for a cordless drill/driver. For strength, mount the center bottom hole through a wall stud, then you can use any kind of wall anchor for the 2 side holes. The mounting holes are sized for #8…
Can be printed in every material. Can be mounted with bolts and nuts, screws or even biadhesive tape (as the contact side is flat)
This is an extended spacer to clamp to a ¾" surface. It may go even smaller. I don't know how much length I added.
Holder for a ketchup bottle that fits bottles made by Idun (Norwegian company). Store the bottle up-side-down to make it easier to empty. Can of course also be used with similar bottles. I've printer this with PLA. Features: Stores the…
Update 01/12/2025: QOL Changes und TPU Roller added + LED Mod, if used on NightOwl! UPDATE 05/16/2024: Modded roller_idler and counterpart, its now easiear to print, build-in support removed. To build this, you need: 8x100mm rods (2x)…
Needed a outer corner trowel for my garage isolation project. Couldn't find anything that would fit my needs, so I created this. No supports Quick print (around 2 hours) Can be easily printed in .28 layer height to reduce print time…
Apr 2026 - recently tried it on my wife's Mazda cx5 and that worked well too. Printed a vertically scaled model for a longer armrest, then crafted/sown together a larger pad, feels great! (Orange IRL pic is scaled up to about 245mm…
This is a sturdy organizer designed to hold the cords for my laptop while I am away from the desk. There are countersunk 3mm screw holes but I am using 3M brand command strips to hold mine in place to avoid damage to the desktop. For…
An open-source hook generator for openGrid , using the openConnect system. This model is called the Sturdy Hook because it is designed to be printed on its side, which avoids the common failure point of layer line separation. I recommend…
Print as in the photo with 3 walls and need support. I used GST3D PLA+ RED.
Lid sides close with a snap and holds securely. Front lip is raised to allow your thumbs to purchase the lid while opening. I printed the Lid with 100% infill. Box is printed with 10% Gyroid infill. Generic PLA seems to work fine. Box…
A sturdier/reinforced version of Ben White's direct drive adapter for Ender 3, to reduce wobbliness when going between retraction and extrusion Prints without support when turned upside down
The model comes in 3 parts Orientation for print is important. The Connection part needs to lay flat otherwise, it is not strong enough. Like it now holds up for a couple of months (even though I only used PLA). The holder width is 27cm,…
redesigned sturdy version of depressor mount
Modular, sturdy, 45degree pan- and lidholder for your kitchen! For my newest kitchen items I needed a modular 45degree panholder so it fits in our shelf. There was no model that fitted my criterias so I designed my own and I hope someone…
Updated with a slightly larger model that will hold 4 things. Increased the space in between to fit a plate with rim. The C1 bgcode has only 100% infill near the base of the uprights. Smaller dish rack is still here. Mini gcode has 100%…
------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! Click the link to get to V.2 of this part:…
Corner clamps in two sizes to clamp things in right angles or 45 degrees. I made them in two sizes (150mm and 200mm) and two versions. Version one has a more harmonious shape, version two has the bars exactly where the force is applied.…
ll the stands that I found were either too weak, unstable or too large to fit in my original case. Then I designed a slim but strong and stable model that I will still be able to close the case with my Outin Nano inside, plus all the…
Easy to print stackable trays with the following dimensions: 180 x 140 x (80 / 70 / 60 / 50)mm I‘ve also added two-compartment versions.
Print area of at least 290x290 mm needed! Print settings: Optional layer height but 0.2 works fine. 4-5 perimeters, 10-20% infill, at least 0.6mm top and bottom. Print one pipe, two sides and two fronts. Assemble and print some more. You…
![Universal Vehicle Window Armrest [STURDY!] for Car Truck Van Sedan](https://media.printables.com/media/prints/b2f98d5e-8461-4564-9686-ca987c0a7d27/images/12573660_187261b7-cf9c-4bfa-97a2-c4caca94a7f1_74ab2709-3349-4fe8-91c7-fb1dc5b66efe/20260407_111147.jpg)
