938 modeli
I designed a servo saver for Tamiya Neo Fighter DT 03 Buggy. The design is different from the original Tamiya piece. I incorporated the 3 pieces of the steering servo into one piece to make changing them easier. The servo saver will break…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
I designed five star rim for a Tamiya rc car compatible 1:10 model, 52mm diameter, 26mm width, 4mm hole and 4mm positive offset. There is also the hubcap and the tool to screw it to the rim. Print with a layer of 0.15 otherwise the tool…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
This is a simple stand for up to two Tamiya square bottles like the extra thin cement or panel liner. After spilling my bottle twice and ruining the pretty grid on my cutting mat, I designed this. 😅
Wydruk około 1,99 €–2,44 € nettoWstępna wycena jednego wariantu
My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
There wasn't a good holder for Tamiya Sanding Sponge Sheets, so I made one. There is a slot for each of the eight grit levels and the rack can be mounted vertically, or horizontal. Uses about 275g of material.
Wydruk około 19,28 €–23,57 € nettoWstępna wycena jednego wariantu
I needed a replacement for the original cross member, as mine was broken. The part is a bit thicker as the original one, but fits the model nicely.
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Mesopotamian Pendant A somewhat masculine version of Ninhursag. Ninhursag was a significant deity in Mesopotamian mythology, often associated with the creation of humanity and the protection of life. A pendant like this likely served as a…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
I designed some shock absorber spacers for tamiya dt-03 chassis Neo Fighter They are used to use the maximum spring compression with the original shock absorbers. I noticed that the springs had little compression even with the stock…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adapter for Tamiya 23ml paint bottles. It will allow the use of regular Vortex Mixers.
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
Settings: Nozzle: 0.4 mm Leyer height: Up to you, I used 0.20 mm No supports needed If this message popsup, look at 4th image and rescale it :) Easy and fast to print!
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
TAMIYA - stack container for 6 color glasses (6x 23ml glasses) compatible with: TAMIYA - stack container for 2x 250ml Lacquer Thinner von stefancham | Kostenloses STL-Modell herunterladen | Printables.com
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
En I designed these wheel covers for the Tamiya Lunch Box. They feature a snap-fit design and should be installed by hand with a firm amount of pressure to ensure they stay securely in place while driving. The covers include four slots…
Wydruk około 0,78 €–0,96 € nettoWstępna wycena jednego wariantu
TAMIYA - stack container for 2x 250ml Lacquer Thinner compatible with: TAMIYA - stack container for 6x 23ml color glasses von stefancham | Kostenloses STL-Modell herunterladen | Printables.com
Wydruk około 5,91 €–7,23 € nettoWstępna wycena jednego wariantu
Slabé místo mlýnku Tescoma Vitamino je uchycení horního hrdla s mlýnkem na průhlednou část. Stačí malý náraz nebo časté používání a tenké osazení se odlomí. Tato sada prodlouží mlýnek (zvětší jeho objem) a vytvoří nové masivnější osazení…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
English I designed this shorty LiPo battery holder for the Tamiya Lunch Box. Unlike the standard battery tray, it does not use the original battery compartment, which can therefore remain available for a traditional Ni-MH battery if…
Wydruk około 4,19 €–5,13 € nettoWstępna wycena jednego wariantu
This is a custom insert for the tami4 edge water dispenser. You can even use the step file for the blank and create your own pattern! I printed this with pla, 0.20mm layer height.
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
ENG: I designed a new battery compartment locking latch for the Tamiya Lunch Box CW-01, allowing a LiPo battery measuring 139 × 47 × 20 mm (L × W × H) to fit inside the original battery compartment. The upgrade also includes a battery…
Wydruk około 1,46 €–1,79 € nettoWstępna wycena jednego wariantu
ENG: I designed this front shock tower brace for the Tamiya Lunch Box CW-01 chassis. The brace connects the two front shock absorber mounting towers, increasing the structural rigidity of the chassis and reducing flex under load.…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
ENG: I designed these 7 mm spacers for the stock shock absorbers on the Tamiya Lunch Box (CW-01 chassis). They fit on top of the chassis shock mounts and feature a snap-fit design, allowing them to clip directly onto the threaded shock…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Hi, I have designed the Fifteen52 Tarmac alloy wheel from scratch in fusion 360 to better suit an rc car, the material (PLA+), the printing process (FDM) and still retain the famous design. The wheel is designed to be printed face down…
I made this pallet rack for my RC 1/14 Lesu Forklift. It’s built more for function then scale looks. It has (5) rack positions. The rack is held together with M3 X 12 or 14 pan head screws. This rack will hold a bit of weight and is very…
These are Tamiya Paint Holders for use on IKEA Skadis pegboard. Skadis_Tamiya_2 and Skadis_Tamiya_4 are for the Mini 10ml bottles. Just added 23ml version, this is too big, cup inner diameter is 45mm.... v2 added, which should be inner…
A convenient way to display your 23ml Tamiya paints. No Supports needed.
I made a steel wheel with a deep dish for my tt02. I made these wheel 52mm high, 26mm deep with and of set of ET02 (2mm positive) to suit my Tamiya TT02 and use original tires. The wheel is designed to be printed face up with supports at…
A remix of a mounting arm I found in the Voron Discord. Unfortunately I don't know who created this. I made this one from scratch and also added the step. You need 2xM3x12, 2x extrusion nuts and 2 heat inserts. You can find some example…
Unfinished project, I don't recommend printing, just for those that are curious :)
Rear and front body post in different lengths for Tamiya TT02. When I completly finish scad file, I will put it here. So you can then create your own variation. 4.7.2025 : added custom lenght (hcl22.5) variant as requested (This 3D model…
IMPORTANT, the base plate is over the Gridfinity dimensions and will over hang on one side. These holders are intended to be on the edge of the grid. I wanted a Tamiya bottle holder for my model desk that fit the Gridfinity system. I…
Holder for Tamiya cement etc square bottles. Print instructions Category: Art Summary Holder for Tamiya cement etc square bottles. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.35 Infill: 10%
A Holding station For CA glue, specifically the Bob Smith Industries type 1. oz and Tamiya glue, square bottles. Also holds the Bob Smith industries accelerator bottle. Print instructions Was printed in PLA with excellent results.
Here are all the parts for Chassis TT-01 Type E that are printable in theory. I did this becouse i was looking for some parts and not all the parts are avaible directly in stl to print. So I tought i would upload them since it worked for…
Versteifungsplatte für Tamiya TT02 Top Deck for Tamiya TT02
1/10電動4WDラジコンカー タミヤのTT-02をベースにしたMサイズシャーシ(ホイールベース210mm)です。 組立には主に下記のパーツが必要です。 ・TAMIYA TT-02 Cパーツ ギヤボックスジョイント ホイールアクスル ドライブシャフトジョイント Gパーツ デフギア スパーギア(70T) ベアリング その他 ・ハイトルクサーボセイバー ・ダンパーセット(CVAダンパースーパーミニ等) ・M3x16mmシャフト(ドッグボーン用)…
If you know, you know, if not print this before it's too late! A lot of us have done it, accidently knocked over a bottle of Tamiya glue ruining a cutting mat, decals or parts of the model you are carefully trying to build. These holders…
After getting a Tamiya Clod Buster for my birthday, I wanted to make something more unique as it looked a bit toyish, so started coming up with ideas of things I could design and print. I've learned loads while designing these, and really…
Inspired by this remix, I made some mudguards from scratch making sure there is absolutely no rubbing. My tt02 has various suspension modifications to improve suspension travel, I needed more clearance than normal. (It should work with…
This bolts on over the front end of the steering rack on the TT02 and takes out some of the side to side slop. The stock screws you remove to fit this are too short, you'll need ones somewhere around 15-16mm. When I finished my TT02 build…
This 2x2 gridfinity block dispenses Tamyia masking tape in 3 different widths: 6mm, 10mm, and 18mm.
Working on some potion bottles. These should print just fine, they might change some in the future Category: Other
Rear Diff Locker to suit Tamiya TT02 if you want to use to drifting. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Infill: 90 Filament: Generic PLA Post-Printing Instructions…
Imported from my designs on Thingiverse. Original upload was 13.06.2020 (dd.mm.yyyy) I reuploaded this here to make the bracket files in one continous upload strike I do most mechanical design. This was requested by…
Info fits 6 tamiya panel line accent color (40ml) or tamiya 40ml square bottle fit 1 tamiya weathering master Print instructions Filament material: Any type should be ok Layer Height: 0.2-0.3 Infill: 10% or more Supports: yes Credit goes…
Welcome, all RC enthusiasts! One of the reasons the TT-01 is a great beginner chassis is the absolute lack of suspension adjustability - you can't mess up the setup this way. However, the chassis is rather nervous and tend to oversteer,…
A paint rack for Tamiya paint pots in 36mm diameter (10ml bottles) DXF files for laser cutting. ; Assembled size (H;W;D) - 328mm; 423mm; 80mm. Print Settings Rafts: No Supports: No Category: Tool Holders & Boxes
Welcome, all RC enthusiasts! One of the reasons the TT-01 is a great beginner chassis is the absolute lack of suspension adjustability - you can't mess up the setup this way. However, the chassis is rather nervous and tend to oversteer,…
Verschiedene Spurwinkel Pfeile innen geben die Fahrtrichtung an. High- und Low-Kompatibel (die Teile können wie von Tamiya vorgesehen für eine hohe und eine tiefe Fahrhöhe verbaut werden). Es ist zu beachten das die Winkel immer vom…
Printed pictures are of Medium 6 compartment box. Large 6 compartment Box: 200 x 100 x 25mm Print: 204 x 220 x 25mm Large 8 compartment Box: 200 x 100 x 25mm Print: 204 x 220 x 25mm Medium 8 compartment Box: 150 x 75 x 25mm Print: 154 x…
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
There are two kinds of scale modellers, those who have accidentally pushed over their Tamiya glue bottles, and those who will do so in the future. If you're reading this, it means you're a member of the first kind :) Welcome in the club…
This Skadis rack can hold 2x a 250ml Tamiya X-20a, airbrush cleaner or lacquer thinner container. Inner dimensions are 55mm x 72.5 mm The design was inspired by the Skadis Tamiya Cement etc holder of SoBaldrick…
Having tried to carry my paint pots around the house in various boxes, I thought surely there's a better way. I had a look around but none of the models available seemed to be stable enough for my liking. This version will carry 15 10ml…
A holder for square bottles of Tamiya Plastic Cement. Fits the Skadis / Skådis system of pegboards. Print it with three perimeter walls and at least 15% infill to make sure that the pegs are structurally sound. Enable support to make them…
Hello everyone, I redesigned the lower rear suspension arm for the Tamiya TT02. For a other projekt I needed them to be slightly longer so I made the model in SW configurable. The models I've added are the originel length and +1,5mm. If…
Tamiya modular paint system 23ml for IKEA SKÅDIS board. It contains one central module, it can be assembled in any length and finished with a left and right module. Update 27.6.2024 Added version for 10ml Tamiya mini paints
Having tried to carry my paint pots around the house in various boxes, I thought surely there's a better way. I had a look around but none of the models available seemed to be stable enough for my liking. This version will carry 11 23ml…
This gearbox brace replaces the original skidplate. I made it in an attempt to solve the well known Tamiya ORV differential issue. The gearbox brace puts pressure on both sides of the of the differential. This should reduce the chance of…
Allows using BambuLabs Wiper with Voron Decontaminator buckets. Features: wall guard for easy bucket mounting even with imprecise hand movements mount holes in positions where Voron Decontaminator bucket mod expects them (for magnets…
UPDATE: Added another brace that prints and works well with the flex in PLA, clips in very nicely. Looks about the same from the outside but the original didnt print well for me so i thickened the insides of the slats, added locator pins…
Tamiya C11 Rear Wing and Diffuser. It is modeled to be a closer representation of the real car with actual down force of 95 grams at 30mph. The top smaller airfoil needs to printed with supports on the underside and printed slow because…
Brenden D'Paula made an excellent mod to use the Bambu A1 silicone brush. I was looking to make one from scratch but decided to remix his instead as it was designed very elegantly. I remodeled it slightly so that it will work with the…
My son broke my TT02B's rear wing, so i made a new one ! ^^ Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Category: R/C Vehicles
A little holder I designed for Tamiya thinner or airbrush cleaner bottles. Can be easily printed without supports. Grips in to the indent on the sides of the bottle. Simple, but very convenient :)
Holds an 18mm, 10mm, and 6mm dispenser of Tamiya tape with a side area for spare rolls. No mag holes
This is a little GoPro mount I designed to mount onto the body posts of an RC car. Included are two versions: Tamiya - designed to be mounted on a TT01 or TT02 chassis, it might fit others. The holes are 5.5mm diameter and spaced at 65mm.…
(UPDATE 7-24-2024) Added a file for 34mm Aero Color paints from Schmincke as requested. -34mm Square Dual (Schmincke Paints) Citadel Paint and Tamiya Cement holders for Yozer's HSW Modular Paint Rack. Modified the original dimensions for…
There are two kinds of scale modellers, those who have accidentally pushed over their Tamiya glue bottles, and those who will do so in the future. If you're reading this, it means you're a member of the first kind :) Welcome to the club…
Stackable paint racks for Tamiya 10ml jars. The racks stack by sitting on the lids of the ones below. Solid sidewall allows labels to be affixed. Make sure to print with the rack in a vertical orientation. 23ml version available here -…
This is a camper that fits in the rear bed of the Tamiya RC Toyota Hilux High Lift. This fits over the top of the stock light rack. I left out the windows as I thought it'd be better to cut out clear plastic so you could see into the…
A stand holder for various Tamiya tweezers. Get organized! PETG and PLA print files included. Also stl and 3mf.
Passt für das Tamiya DT-03 Chassis, besonders für den Neo Fighter Buggy und Racing Fighter Buggy. Die Befestigung des Heckflügels erfolgt mit den im Karosserie-Kit enthaltenen Teilen. Der Heckflügel wurde von mir aus TPU Shore 98A mit 25%…
Das gezeigte Modell im Bild ist mit einer 200mm breiten HPI-Karosserie und mit Offset -3 bestückt. The model shown in the picture is equipped with a 200mm wide HPI body and offset -3. Die Felgen sind in "meinem" Standard-Offset…
Based on the Vallejo Paint Rack from Stu Cameron a paint rack for Tamiya 23ml X and XF paint bottles.
Organize 18,10 and 6 mm Tamiya Masking tape dispensers on your Ikea Skadis board. See also my other designs for more ways to Organize your Tamiya tools on the Skadis board.
I made this Bumper in order to replace my original Tamiya Foam Bumper. I race it with VW beetle body from racersparadise.de Other Bodies might fit as well for sure. You can choose what ever infill you like, and don't forget to leave away…
A station that holds a complete set of Tamiya weathering Masters, four bottles of Tamiya panel accent and some brushes
You can use this seal on clay and ceramics.
A wheel for the Tamiya M-03 models in the style of the OZ Rally wheel. It's the blue one, I lost the source for the red wheel somehow, sorry. Requires MCAD:…
Remixed Xlnt3D's nicely designed rear TT-02B shock tower ( https://www.thingiverse.com/thing:4494409 ) so I could use my stock screws. This is a great replacement to add rigidity to the rear shock tower so your shocks can do their job.…
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
doors inspired vitamin box
Hier hab ich ein Paar Scheibenwischer für den Ford F350 von Tamiya. Der linke ist etwas stärker abgewinkelt, der rechte etwas flacher. Here I have a pair of windshield wipers for the Ford F350 from Tamiya. The one on the left is a little…
Base to stop Tamiya Glue Pots from falling over
Holder/Tray for Tamiya paint bottles (small). Large & small bottle on the side of the photo for reference. Category: Organization
Organizer holds: 4x Tamiya Weathering Masters 2x Bottles of Tamiya Panel Liner 1x Tamiya Paint Thinner 4x Brushes Cotton Swabs Print instructions: Printed with PolyTerra PLA mint color, 0.25mm, 5% infill, no brim, no supports Inspired by…
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
The holder for my body on my TT02 chassis wobbled a bit when driving. To fix this problem, I designed a stiffener. The brackets wobble less and the body sits better on the chassis. The distance between the two holes is 67mm. The diameter…
Intamin rollercoaster track made in fusion 360
Clip-on exhaust for Tamiya TT 02 model cars. best in TPU printing for longevity.
Diese Freilaufbühne ermöglicht es, Modellfahrzeuge im Stand einem “Probelauf” zu unterziegen und Einstellarbeiten am Antrieb (Antriebswellen, Schaltung, Getriebeansteuerung) durchzuführen. Die führenden Zahnstangen verfügen über ein 2 mm…
I designed this Tamiya paint tray in Fusion 360 to hold Tamiya Colour paints, it will hold any height bottles, but at present I have designed the clip to hold two trays together to fit the 10ml bottles If I get any larger bottles or have…
After many tests and development this is the result. High Grip rear uprights with lower rollcenter and 2.5 degree toe in. I recomed to print this of pla strong from esun or PCTG. I drive this upright in a 17.5T powered Car indoor on…
Model of a Mesopotamian Lamassu, based on a 3-D scan from the British Museum. As the 3-D scan was of a relief built into a wall, this model was created by mirroring the visible half to create the full model, so both halves are mirror…
Was looking for a stepped type organizer for my small collection of Tamiya X and XF (23ml/40mm dia) line of acrylic model paints and couldn't find exactly what I was looking for to print on my Prusa Mini+, so I made one! Stepped design…
Did a renovation for an old Clodbuster and used a Blackfoot shell for this. As there is no proper interior available I designed a very simple interior to cover the cables and wiring and give it some more realistic touch. Some parts need…
Spare front suspension mount for the Tamiya DT-03 when no genuine spare part is available. It's pretty similar to the genuine part and - depending on your filament choice - should work just as well or even better. Print Settings Printer…
52/19 tooth spur/drive gear for use with the Tamiya DT-02 and DT-03 gearbox. Design - I used the front suspension and rear suspension/gearbox unit to build a stock RC drag car, but wanted a higher top speed than the original gearing. The…
I did this mod specifically for the Micron/Micron+ printers, but it probably can fit any 1515 extrusion printer. Multiple bucket sizes are included. Print using standard Voron settings. M3x6mm screws for mounting. Follow the directions…
Permet de retenir les plus gros débris de mousse ou feuilles et limite l'encrassement de votre cuve 1000L récupératrice d'eau de pluie . le modèle en 220mm dispose d'un trou de 56 mm pour passer un tuyau de pompe d'arrosage, le modèle en…
I use heavily in my workshop Modular workshop system from Hobbyzone ( http://www.hobbyzone.pl/en/wsm/Hobby+Zone+modular+workshop+pt3this/ ). I love their product. Smart, practical, easy to build. Holder I am presenting here is inspired by…
![Tamiya TT01 wheel hexes [different widths]](https://media.printables.com/media/prints/425363/images/3518554_bf45835a-4fb6-46ab-9f83-35d3528e8070/20220117_114136.jpg)
![Tamiya TT01 Rear Uprights [Toe, Camber adjustable]](https://media.printables.com/media/prints/119961/images/3518193_31bc09b1-6ae1-4a2d-9feb-f5442f1e1619/20220117_115536.jpg)
