106 modeli
Quickly printable wheels compatible with Lego Technics that print without supports. With the included scad file, wheels of any diameter can be generated. For the case of non-original connecting pins of different diameters, or if you need…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Logo Technics
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Display stand for imho one of the best Lego technics sets. Displays the plane at a 40 degree angle, the plane itself is fixed to the stand using 2 clips. The clip needs to be printed 2 times, 1 time as a mirrored part (included in the…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Printed from PLA+ and PLA Silk. Fill 100% When printing letters, use max. speed. 25mm/s Black filament: PLA+ Gembird Gold filament: PLA Silk Spectrum As a wall mount, I recommend:…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Difficile de trouver des protèges diamant pour la platine vinyle de marque TECHNICS.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
I created a gauge for a turntable stylus, specifically Technics-style headshells. When mounting a new cartridge onto the headshell the depth of the stylus is supposed to be a certain depth, this should be a good visual aid for checking…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
One thing that has always irritated me about my Technics 1200s is the hard-wired cables. This mod adds sockets for the power inlet and RCA phono outputs. The ground wire output is via a 2mm banana plug socket. Printed in PLA, 0.2mm layer…
Record Coasters with a Charming Technics SL-1210 MK3 Holder Why another set of Record Coasters? While I’ve always appreciated the concept of record coasters, existing designs often fell short due to printing challenges. Many abstracted…
The Technics SL-J110R has a flawed hinge design where the spring is too strong and cracks the plastic. As these record players are pushing 30 years old, there are no new hinge available, and most of them seem to have broken. Taking…
Have you got elderly Technics speakers? It's a pretty good bet that at least one of them has decided to spitefully cast aside its emblem and exclaim: "Badges? We don't need no stinking Badges!" Here is a 1:1 replica of a Technics speaker…
A replacement for the tonearm rest with working lock. For Technics 1210 and 1200. Print it on the back with support on
Replacement rubber foot pads for old Technics turntables. Technics part number SKLB2. My turntable is an SL-QD33, but it probably works with others as well. Print in Ninjaflex or another soft TPU, with support turned on. Reuse the springs…
Technics SL-1200 dust covers are hard to come by, but Reloop has one that almost fits, the hinge mounts will not work on a Technics. This is a hinge adapter that will work with an SL-1200 MK5. It may work for other SL-1200 versions, but I…
This is a clamp to hold the pivot - bearing of a technics 1200-1210 turntable while you repace damaged bearings. You will need to print two so just mirror this one. Print Settings Printer Brand: Creality Printer: Ender 3 Notes: print in…
These were originally made for the Technics SL-BD20. Compare your cover hinges if you are using a different turntable as I am not sure if these will fit other models. Cut away old hinges and drill holes for the new ones. Attach the hinges…
My dad has a Technics hifi but the logos are missing/broken off. He asked me to put together a couple of logos so he could stick them on.
Technics AEH-AZ100 charging case protective TPU skin
This is a foot I designed for the Technics SL-1200 MK1. It will not match the original (I don't think you can have both on your turntable) nor will it have the same acoustical properties. It's just a “better than nothing” option. You will…
Have you seen prices for commercially made star pumps? They are way overpriced. Thus I designed a printable version of it. The star-forming process takes quite a lot of force so print it strong :D with small layer height (0.1mm) to make…
Feet for a Technics SL-1900 turntable.
The tabs on my SL-220 dust cover eventually broke off. These are a bolt on replacement using M3 hardware. Instructions: Mark where the old hinges were with sharpie trim and sand off any bits of the old hinges that may remain. Clamp…
The rest arm of my Technics SL-D2 turntable was broken. Took the thingiverse stl available and remixed it by extending the shafts to make it work with the SL-D2 model. Attached is the image of what the actual arm looks like but I am not…
Needed to fix my auto return but this model is so niche I had to troubleshoot it pretty aimlessly, turn out it's simply replacing this gear that was cracked and making sure it's tensioned onto the plate so it spins with it. Props to my…
This block adapts a NEMA 17 stepper motor to Lego Technics so that you can do fast prototyping of your controls and circuits before building out the mechanical components. The model puts the stepper axle on a technics pin location. The…
Technics Turntables have dust covers that rest on the main body of the turntable. To prevent scratching the top of the main body, Technics added two small rubber spacers on the sides of the dust cover. After now about ~40 years of…
This is the upper part hinge, to replace the acrylic tabs when they break on Technics SL-3300 turntable. Might fit other Technics turntables with tabs molded into the dustcover. Please post in the comments if you used this on another…
Technics Logo Plaque - A Timeless Tribute to Audio Legends Pay homage to a true icon in the world of audio with this high-quality, 3D-printable Technics logo plaque . For decades, the Technics name has been synonymous with unparalleled…
I tried to model this to the original Technics feet as closely as possible. May raise the turntable slightly higher. Printed with solid infill in TPU, cup down with support on build plate only. You can reuse the original washer and nut…
Updates 11 Feb 2025: uPorto_BASE_B Added the BASE_B - the same thing as above, but lower down. It's aligned so that you can easily bridge the two sides enabling more possibilities and better support. Limited space allows for only a 13 x 1…
This repository is a collection of after market parts for Technics SL-BD20 that you can print and repair the turntable yourself. Thus the "keepalive". Cable Module The SL-BD20 has a proprietary ground cable, which is hard to find in 2025.…
This is an easy way to add a 37.5mm gear motor to to your lego technics mechanical prototype. I use this to quickly mockup a mechanical system so that I can work on the electronics and software to drive the system. A press fit 21t XL belt…
lego technics brick 5x2
I made this overhang gauge back when I was a seller on eBay and gave these away as a freebie with products I sold. Its a 52mm overhang gauge and its set to fit the original head-shell from a Technics SL-B2 turntable. This will work for…
The Technics part number for this item is SFUMC07-16 The Technics SL-7 is a great vintage linear tracking record player from the early 80s. I love it, and I already repaired a few getting them back into working order. The turntable…
A very accurate tool to ensure your stylus is properly aligned. Simply insert your cartridge and align the needle with the groove in the base. Thanks to mknower on Thingiverse.com
lego technics brick 12x2
lego technics brick 16x2
The Technics SL-1200 Mk7 comes without hinge mounting points for the dust cover. I wanted somewhere to keep the dust cover while the record player was in use, rather than just propping it up against the cabinet. I saw some discussion…
lego technics brick 11x2
This is a simple back plate for replacing the wire terminals on Technics 12 inch floor speakers with banana plug sockets. You'll need this set of banana plug terminals for this project:…
A simple model to raise your decks 80mm up from the table surface. Perfect fit and really sturdy. Simple perfection.
lego technics brick 6x2
lego technics brick 10x2
lego technics brick 8x2
lego technics brick 13x2
lego technics brick 15x2
lego technics brick 14x2
You will have to remove all of the plastic from the existing post in order to install this tonearm rest. You might think you want to remove the post from the turntable in order to do this. I recommend against that given how much you have…
lego technics brick 7x2
This model lets you easily incorporate a rotary encoder into your Lego Tecnics mechanical designs. The gear is a press fit onto the encoder shaft and the shaft is centered on a Technics pin location for easy meshing. Designed to fit…
lego technics brick 9x2
Foot for Technics cassette deck.
Hello All - I have a Technics SL-15 linear drive turntable and originally, in the 80's you could get aluminum stands for it. I went looking for some and they go for $500 on ebay! I had a buddy draw me this up and it works perfectly! I…
Technics 1200 45 Adapter. (one of the originals)
These where designed for vintage Technics speakers (circa 1985). Especially for the SB-2565 model speaker tower. Its close copy not exact replica, so they would have to be printed in pairs to keep the look.... . Added one for the stock…
Mould King 10015 - Motorized Santa Sleigh Modified Technics 1x4 Brick by RebelTaz In the instruction manual, on steps 65 and 101, there is a Technics 1x4 brick. If you install this as directed, the worm gears in steps 66 and 118 hit the…
This is a simple pointer that fits nicely onto a technics axle. I use it with a gear reduction and limit switch to test automation projects.
This is a solution to repair broken hinges on Technics SL-D1 turntables. This is not a solution for broken acrylic dust cap. It solves troubles with the hinge itself. Developed and tested for a SL-D1 turntable, but works on SL-D2 and…
Technics 1200 Headshell Cartridge Stand. Locks in secure. Fits technics & stanton headshell (16mm H). Comment changes
Hay que desmontar el plato y colocar leds sobre el pitch despues se coloca con un poco de pegamento el difusor mas grueso 3mm y cuando esta el plato montado nuevamente se colocan las dos piezas, además he incluido un adaptador para los…
Technics SL-1500 Damper Feet Filament used ColorFabb VarioShore TPU - 92A Print settings Nozzle size 0.6 Layer height 0.20 Detail Infill: 0-2mm: 30% Gyroid >2mm: 0% (no infill) Layers and perimeters: Solid layers > Top: 6 Ensure vertical…
Reproduction volume knob for the following Technics mixers: SH-DJ1200 SH-DX1200 SH-EX1200 Used on the monitor volume, cue balance, master volume, aux and mic volume.
This is a replacement feet for Technics linear tracking turntables. I know for sure it works with SL-J1 and SL-J2, but I suspect it is compatible with all linear tracking models. It reuses the original spring and screw and is designed…
small and simple tray that fits my bluetooth in-ear headphone case perfectly. I use it with an angled USB C plug. USB-Charging Port accessible easy and fast to print, no supports designed close to the original case, rounded corners etc.…
Technics 1200 Tone Arm Bottum Plate Cover where Audio Cables exit rca
Technics SA-EH790/SB-DV290 Custom speaker grilles
Technics 1200 Tone Arm Little Grey Plug (back left by weight) Yrs later, still not sure what plug is for :)
I had a few of these power sockets lying around so it made sense to changed the original power socket face plate to accommodate this format. The fit is tight and required a bit of heat in order to go in, but the result is great as you can…
Technics Miniature Collection in the style of a dj setup, so I made this simple platform with angled supports
Remove the broken parts by sanding. Drill holes through the dust cover and bolt them together with the back plate. Print it like the first image for the best result. also 100% infill for strenght .
This is a replica to the SH-B10 Stands, it was only based on images and measurements on the actual turntable, so it is not 1:1 identical. However it looks good and fits nice. Printing: The part is pretty huge, i am providing a 2-piece…
Replacement foot for the Technics SL-Q2 turntable, designed using measurements taken from an original factory foot. The design is intended as a replacement for missing or damaged feet while preserving compatibility with the original…
I wanted to display Technics Miniature Collection headphone, so I made this simple headphone stand.
The rubber grommet inside the Technics Sl-1900 and SL-1950 Turntable foot. Meant to made with TPU 85a or NInjaFlex. The blue ones were tpu 95a but were too rigid. Pairs well with But you will need a spring still I used…
My turntable dust cover was missing a pad on the left side, causing it to be unleveled. I created one and was able to press fit it, works great. Printed in PETG but should work in a softer material.
These are different shape headshell spacers to use with your turntable headshell. They are in different thicknesses. Most audio enthusiast know what these are needed for. You can print them in PLA, PETG or ABS. I prefer to print them in…
Reproduction Gain / EQ knob for the following Technics mixers: SH-DJ1200 SH-DX1200 SH-EX1200
Almost 1:1 replica of a Technics SH-8065 Slider Knob for the equalizer. Printed at 0.1mm layers. Use supports for the overhang section Category: Other
I wanted to display Technics Miniature Collection record, so I made this simple stand
This simple model is a mount pin for the cover sockets of Technics SL-1210MK2 turntables. It is currently designed to fit an M3 threaded insert, but it can be adapted for smaller/larger diameters. The regular version is flush with the…
Cups which allow Technic's turntable to sit on foam padding cleanly without leaving layers of padding on show. Just add foam as desired and you are good to go.
My second hand Technics SL-D3 came without one of the control buttons, so I've created this one with Fusion360. I'm a complete Fusion360 noob so it's not 100% like the original but fits and works. Printed in PLA+, 0.20mm height.
I recently repaired a Technics SA-400 receiver and, in the process, converted the lighting to LEDs. Since suitable BA9S LED bulbs are quite expensive (at least in my country) and installation in the spring-loaded sockets is very fiddly, I…
Feet for Technics SL-1900 turntable. Sticks on using any double-sided tape, and has a large enough bottom to allow various sizes of soft padding to be stuck on to protect the bottom of the turntable and any surface it is placed on.
Replacement platter lock stopper for the Technics SL-DZ1200. You will need 3 of these to lock the platter during transport.
soportes de rejilla de goma (Caucho parlantes) para parlantes Technics SB - LX70, Use Flex only o TPU 95 or less
Precision Alignment for Charging This is a functional 3D printable adapter specifically designed and tested for the Technics EAH-AZ100 headphone case. EAH-AZ100 supports wireless charging, its small form factor prevents it from reaching…
Replacement tonearm standoff for the Technics SL-1600MK2 and its variants; the SL-1700MK2 and the SL-1800MK2 - in case your standoffs are missing or broken. Unthreaded and sized for the factory screws, though a #4 3/8" and a #6 1/2" will…
The fan broke in a Technics SA-GX130D receiver. This should be a drop in replacement for the fan shroud, using a 60x60x10mm pc fan, except of needing to replace the connector with the connector from the original fan. Currently I have not…
This print enables a Raspberry Pi Zero or Zero2W to be installed within a Technics SL-PG3/4/5 CD-Player. Warning: This modification requires opening and modifying mains-powered equipment and cutting the player lid. Ensure you are…
I bought a technice SL-Q200, but those original rubber feet were missing or broken (the rubber seems to get rather brittle. The model is a very simplified version but does the job. I used SainSmart TPU 95A, Overhangs are handled nicely…
For all the 50+ Vinyl lovers who, like me, are still firmly in the denial stage (I Used To See Fine): I’ve made an adapter that lets you mount the well-known IKEA NÄVLINGE lamp in place of one of the hinges on your SL1200.
This model lets you easily incorporate a rotary encoder into your Lego Tecnics mechanical designs. The gear is a press fit onto the encoder shaft and the shaft is centered on a Technics pin location for easy meshing. Designed to fit…
This is a simple pointer that fits nicely onto a technics axle. I use it with a gear reduction and limit switch to test automation projects.
Technics SA-EH790/SB-DV290 Custom speaker grilles
Technics Miniature Collection in the style of a dj setup, so I made this simple platform with angled supports
A simple model to raise your decks 80mm up from the table surface. Perfect fit and really sturdy. Simple perfection.
Remove the broken parts by sanding. Drill holes through the dust cover and bolt them together with the back plate. Print it like the first image for the best result. also 100% infill for strenght .
