138 modeli
A simple case to protect your spare Nitecore NL1416R battery when it's rattling around in the bottom of your bag while it's not in use. Cap comes on and off with a satisfying “pop!” Print with the open ends of the case and cap facing up.…
Wydruk około 0,86 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print in PETG for added strength and flexibility
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adapter for NITECORE Intellicharger i4 to fits AAA batteries comfortably and stable during charging. Made in Autodesk Fusion 360.
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
držák na světlo na čepici nebo k přichycení k čemukoliv. řeší problém jednostranného klipu. doporučuji tisknout na výšku.
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
I recently bought the Nitecore EMR10. It comes with 10 packages of repellent mats. As I wanted a fancy form fit box for it, I created this handy box. Check out the pictures and the model, you might like it
Wydruk około 3,79 €–4,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mount for a Nitecore EC20 flashlight (21mm diameter). You will also need: 2x M3x30mm bolt, 2x M3x12mm bolt, 4x M3 nut
This is my version to rise AA & AAA batteries so they can charge properly. There is a grip area to remove the riser easily. The "bottom" part of the riser is flat to enable a good access to the batteries. It is also possible to leave the…
Nitecore battery banks while being the lightest option available, have a unique bug (or a feature if you ask Nitecore) where if the button is pressed down for more than 10 seconds, the battery enters a hibernation mode. Unfortunately, the…
NiteCore EDC27 RIS Adapter This adapter allows you to mount your EDC27 flashlight to any RIS you have, making it in instant an tactical light. You can use clips to secure it on no recoil/low recoil devices, or use 2x M3 DIN912 screws to…
This is a set of different tools to help flashlight bezel removal. I recommend to print them with PETG or ABS/ASA with 5 to 8 perimeters and 0,1 mm layer height. This is a growing collection, so feel free to check back later for tools for…
Create a useful small parts organiser from your empty Tecor filament spools. Tecor brand is sold worldwide so you may have some spools already. Other Parts required Empty Tecor filament spools 72mm rotary bearing 60mm PVC pipe - length…
Always bumping on things in the dark is in the past - clip on this small thingamajig on ye flashligt and be done with em problems! Wife complains about silly headlamp - SLAP ANOTHER LIGHT ON ANOTHER SIDE OF YE GLASSES AND ZOOM AWAY! With…
A bike mount for the Nitecore NU25 UL. Use a ruberband for fix it. 20+% infill 0.2 mm layer height 🤙🤙🤙
I purchased both the NiteCORE CW20 and the WolfBOX MF100. The NiteCORE quality is leaps and bounds better although slightly less powerful / cfm. I modeled the 12mm tip after the WolfBOX and still wasn't as happy, so I remixed the 10.5mm…
NITECORE CHARGER WALLMOUNT
Легкий (около 8,5 г на рекомендованных настройках печати) и прочный MOLLE адаптер для Nitecore NU25(V2)/NU 25UL. Эта модель сохраняет оригинальную систему регулировки наклона лампы и доступ к порту зарядки для работы от повербанка.…
This is a bike helmet mount to fit the Nitecore NU25. I adapted the rather bulky design and changed the angle so that it works in a more aggressive position on the bike. It should fit for the UL and non-UL variant. I glued a small piece…
Clip for the Nitecore Tube keychain light (tested with version 2.0, but the original one should have the same dimensions). Intended for attaching the light to a cap brim to turn it into an ultralight headlamp. The thing consist of two…
Print settings: 0.6 Nozzle TPU Wall loops: 2 Infill density: 100% Infill pattern: Rectilinear Support: True Type: Tree If you need the STEP file, please contact me.
Remix of Nitecore TINI 2 case, but with access to the screen, buttons, and lights, so that it does not have to be removed for use. Category: Tools
Tailswitch guard for Nitecore EDC27. It replaces the original plastic that goes together with the clip. As I didn't find any "ready available" tailswitch guard model for the EDC27, I made one myself and wanted to share it here. There are…
Keep the dust out of the ports on your Nitecore NB10000 while on your adventures. Also prevents accidental presses of the power button. Confirmed fits Gen 2, untested on Gen 3 Print Settings Material: TPU 95A Support: None
A light diffuser and button protector for Nitecore TIP SE flashlight. A minimalist, lightweight flashlight “lantern” for ambient light in the tent or hammock. The diffuser has two positions. Collapsed/pushed all the way in = button…
Carry your spare 21700 battery for the Nitecore P20iX with confidence using this custom-designed case. Built with precision, this case accommodates Nitecore NL2150HPi and NL2153HPi batteries securely, providing both protection and weather…
This part replaces the headrest on the Nitecore HC65 headlamp. Its function is exatly same as the original. Printing: The SidePieces are to be printed from flex material. Made mine from TPU 98A and it works verry well. The Headrest is…
I would recommend printing in PETG or Polycarbonate.
This is a minimal case for the amazing Nitecore F1 charger/power bank device. It keeps the attached 18650 battery in place and the dovetail on the side of the case lets you to mount it right below the handlebar stem. To keep the charger…
I found @FluxLiquids wall mount for the Nitecore D4. But as written by someone in the comments there, the EU version of the D4 seems to be a bit beefier. I took the original model and just used the slicer to resize it. I also added a…
Just a holster for the EDC25 flashlight. As far as I know, there is nothing like this so now there is I should get around to printing it soon… Please check out my other models.
Nitecore P20iX Tactical Flashlight Holster
I have this Nitecore charger that can take AA, AAA, 18650 and other batteries. When charging AA batteries, sometimes its hard to make them connect correctly, you have to rise them a little so they align perfectly with the metal…
Cap mount for the Nitecore NU25 (2017) headlamp. Print on its side with supports. I used organic supports. Inspired by the Insta360 GO cap mount
Wall mount for Nitecore digicharger D2. Cut-outs for buttons and ports. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0,2 Infill: 100 Filament: 3DE Premium PLA Black Notes: The file has some…
Inspired by, but not a remix of, or as nicely designed as https://www.printables.com/model/177142-nitecore-d4-digicharger-aaa-aa-akku-battery-riser
I made this to utilize HC65 unit as my bike light. The separate pieces are slided from both ends and then kept together by GoPro attachment. In the pictures the mount is attached to Garmin-GoPro Adapter…
For me it was a smidge loose - but it was late and also didn't feel like printing it again. I used a small heat gun to bend the ends a little towards each other. Depending on printer you might want to try 99% or heating the ends like me.
It's a simple cover to help prevent the dreaded NB10000 accidental long button press that disables the battery. Easy quick TPU print.
This is a simple cradle to take a AAA rechargeable battery and allow it to easily fit into an 18650 battery slot. The Nitecore charger I have doesn't accept the AAA all that well, they need to be held in place just correctly. This cradle…
Background and options I searched for a ultralight trekking headlight and decided to use my nitecore tiki ( LINK ) wich is ultralight and super useful: extra small and ultra light almost watertight - rainy weather is not a problem (IP66…
A diffusor that can be used with the NiteCore MH12GT or any other flashlight that has a head of 25.4mm wide.
Single battery riser for AA and AAA batteries In the Nitecore Digicharger D2.
I do night rides on my local trails and didn't want to spend on a bike specific light. Since i have the Nitecore MT2C Pro, i opted to use that as the helmet mount light since its mighty bright. Clips the Nitecore MT2C Pro (or any 21mm…
I designed this mount some time ago to attach the Nitecore HC65 headlamp to my bike helmet as a alternative to a GoPro. I printed it in polypropylene, which adds just the right amount of flex, making it easy to snap the light into place…
The Nitecore Digicharger D4 is my go to charger for my Eneloop and 18650 rechargeable batteries. It delivers a decent battery current and can do one to four cells, simultaneously. It's open top design allows batteries to be inserted and…
This is a cap to prevent the Nitecore HC68 's switch from operating during transport in a bag or luggage. Printing instructions Print the .stl file as oriented, in flex material If the fit is not perfect (variations in printers and…
Skadis support for Nitecore CW20
A bike mount designed specifically for the Nitecore NU20 (Classic) headlamp, created as a practical solution for riders looking for a ultralight, USB-C rechargeable bike light. The mount securely holds the light while allowing quick…
A head mount for the Nitecore nu 25 Old c flashlight with powerful locking devices to prevent the flashlight from falling down.
This is a cover I designed for the headlamp Nitecore HC65 V2 to protect it against scratches and accidentally switching on. I'm not sure if it fits the HC65 V1. Because of the clamping I printed it from PETG, but I think flexible…
Clips for mounting the Nitecore NU05-V2 light on fabrics, like a nylon strap, molle system. Available in and open and closed back version and for two different thicknesses a “fabric” ±0.5mm thick fabric (e.g. molle system on the nitecore…
A simple IKEA skadis holder for the Nitecore E4K Print Settings: 0.4 nozzle 0.2 layer height printed with supports material used: PLA+
The Nitecore power banks have a bug where if you press and hold the power button they enter a lockout/hibernation mode. The mode can only be cleared by charging the power bank, which is not possible if this is your only power source,…
Very easy mount or holder for batteries charger NitecoreSC4 on the HSW system. HSW - https://www.printables.com/cs/model/152592-honeycomb-storage-wall/files
Nitecore Tini2 flashlight Case whit Clip for Cap mount.
I use the P20iX as a EDC flashlight and always carry it in my left pocket. Over a few weeks it managed to tear a hole into one of my pockets, because of this i made a small rounded protector cap which can be clipped on to the P20iX and…
nothing fancy, only a larger version of standard Nitecore tactical ring for P20 flashlight Freecad sources are supplied, for customizing the design to other flashlights
This model is designed by me. I used I micrometer to measure it and then made it on Tinkercad. It's not the exact accurate but it does the job and it keeps the flashlight on my vest. I made it with PLA 90% infill. But I would recommed…
Make concrete weight plates without a form. The core becomes a wear resistant part of the plate and forms the hole. Hotglue the core into the middle of a flowerpot saucer (?). Pour concrete around the core and wait. I used two sizes of…
A mounting bracket for the Nitecore UI2 18650 rechargeable battery charger. Vertical bracket for drywall/wood screws to free up those precious horizontal surfaces that we all treasure. Print vertically, only need supports on the wings,…
The mount provides a snug fit for the charger and allows for easy access and removal while keeping your workspace organized and your charger safely in place. Designed specifically to fit the form factor of the charger, it holds it…
I'm put the torch from the hole marked with red arrow.
Printed with ABS with auto tree supports from Orca Slicer with access to the battery compartment, front panel and side buttons.
Extends the flashlights body to reduce risk of miss pressing of on/off button. Button is visible and functional over wall for ease of use. It doesn't protect button fully but decrase chance that button is pressed without intension.…
Replacement USB Port Cover for the Nitecore HC65. It may or may not fit the HC60 as well. Note: 3D printed parts usually aren't waterproof, so don't go swimming with the HC65 if you've had to replace the cap! Category: Tool Holders & Boxes
The Nitecore Thumb is an excellent submini hands-free rechargeable flashlight. But when clipped to the chest, the hemispherical lenses cast light directly into the eyes of the wearer, even at maximum forward tilt of the light. This shade…
An enclosed mount for a Nitecore TUP flashlight for picatinny rails. Ideal for airsoft pistol. All controls, screen and charging port are exposed so that you don't have to remove it every time.
This is a simple molle clip I made for the Nitecore NU05 V2. The clip on the light kept popping off my backpack. I made this to stay clipped on much better. Print in PETG so it has some flex without breaking while you attach it to molle…
I had a broken Glass on my Nitecore TM 28, so I design this part to safely remove the front bezel. Print Settings: I used PETG, 0.15mm For optimal layer adhesion, I recommend printing at least 250C, and slow printer movement.
A replacement shell for the Nitecore TIP (V1). 1mm thick, 0.5mm detail, should work on both MSLA and FDM. No supports needed. In order to get maximum transparency using MSLA I used a clear resin (Anycubic Clear), printed the object flat…
Snug fit wall mount. Fastened to wall (or wherever you want) with two screws.
print with support for the mount, but only critical areas above the build plate.
A simple IKEA skadis holder/stand for the Nitecore T4K Print Settings: 0.4 nozzle 0.2 layer height printed with supports material used: PLA+
Belt holder for Nitecore TIP 2 Printed in PLA 3 years ago, still holds up after daily use! Holds the TIP2 securely with its own magnets, it never fell out. -Prints without Supports when standing on base -Cut a small piece of magnetic…
Extend your device life time by protecting it. Print with transparent filament and use it as a diffuser.
A small case for Nitecore TINI2, that works as a host for metal clip. I've got metal clips from here: https://pl.aliexpress.com/item/1005005490192852.html Dimensions are on last photo, so anything that follows them will work. Probably you…
The footprint of this model is 2x2.5, so it essentially occupies 2x3 gridfinity units. The main compartment holds the Nitecore FX1 charger for Fujifilm NP-W126S batteries. I modified mine to take usb-c from the side, so there is a cutout…
Fix for the Nitecore D2/D4 Loader Category: Electronics
I printed with tree supports in PLA and it seemed to turn out pretty well. I'm sure I'll need to reprint in a sun/heat resistant material in the future but this was more of a proof of concept.
Holds the Nitecore EDC23 flashlight, with some play in the container. Could be a bit more snug, but I didn't want to print it a second time.
Simple diffusor for Nitecore MT21C. Suction fit on either end of the flashlight. Vase mode Einfacher Diffusor für Nitecore MT21C. Saugende Passung für beide Enden der Taschenlampe. Vasenmodus
This innovative mount clamps around the 8.2mm structural tubing of my bike pannier rear rack and support for the Nitecore NU05 v2 light. My rack is a Filzer PR-5 from MEC (Mountain Equipment Co-op), from about 10 years ago. It looks…
A replacement headlamp stramp mount for the Nitecore HA15 UHE. Features: Strap holes for secure fitment Thicker design to prevent snapping Perforated rotation circles for more precise headlamp angle adjustment Additional space to fit…
Cover for the Nitecore MH23 and sure other models with the same diameter. with PETG no issues of deforming by full power mode. 0.2 layer 240/70 temperature PETG additional feature with Cura fuzzy skin (outside!)
This adapter allows you to securely mount a Nitecore MH12 flashlight using any standard GoPro mount . Designed specifically for the MH12 model, it ensures a firm hold even in demanding conditions such as mountain biking. For full…
simple tactical ring with lanyard holes... designed for P30, can mount also on SRT7- SRT6 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: PRUSA petg transparent red Notes:…
UPDATED 28th Jan 2024 … I have updated the files to have zero tolerance between the adaptor plate and the spool hole … it is now a snug fit and this makes the spool roll better rather than clunk as it rotated with the previous 2mm of…
I tried using the original design on my Walther P99, but it ended up flinging my NiteCore TIP down the range. This remix handles the recoil from my P99 quite well. I am now using this mount with my Nitecore instead of a StreamLight which…
Designed and tested to fit on this model of flashlight only. Others might fit also. You only need two tie wraps to fasten it to the handle bar. The mount holds the flahslight tight and you can remove it from the mount with a bit of force…
Button lock for the Nitecore TIP3, as I couldn't find it anywhere. The TIP3 locks with the available buttons, but I found out multiple times it unlocks in my pocket, the light turns on and it drains the battery (and of course always when…
printed with transparent ABS-T
Getestet mit 0,4 mm nozzle und 20mm layer hight und 15% infill
Made a Remix from crisb's nitecore-hc65-v2-protection-cover to accomodate for the button guardring that I glued around the button to protect it from accidentially switching it on. Print in ABS FusRock GF 10% also works fine, did not have…
Replacement for original part that is easily broken. Was tested in a few hikes
Just put some of these prints in place and you are good to go. Ever since I have installed mine, I never had to replace a pot again. Printed with Prusament PETG at 0.3mm layer height to make them suitable for outdoor use. ASA might bei…
The NiteCore D4 digicharger can't recharge NCells properly because the minimum contact position is like 0.5mm too short, and the batteries drop down too low and fall below the bumps and it is a very dodgy connection that needs some…
Armband für die Nitecore Tini2. Link zum Armband (20mm): https://de.aliexpress.com/item/1005006978916568.html
I made a cover for my Nitecore i2 Battery charger as I didn’t like the fact that the batteries were exposed and could easily be knocked out of place. The cover snaps in place and can easily be removed. I also made sure it was not fully…
A tool to help the grip on a nitecore MT-1C light
