P
PrintablesFTL
SSR-40 DA (FOTEK) safe cover
PETG, 25%, and support everywhere…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 558
- Polubienia
- 26
- Ocena
- 5
Wyniki wyszukiwania: tek
1663 modeli
P
PrintablesPeter Farell
Star Wars Blastek DH-17
Star Wars Blastek DH-17
Wydruk około 14,76 €–18,04 € nettoWstępna wycena jednego wariantu
- Pobrania
- 410
- Polubienia
- 105
- Ocena
- 0
P
PrintablesMuad´Dib
Záložka do knihy - čtyřlístek (Bookmark - Cloverleaf)
Záložka se vytiskne za cca 26 minut.
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
- Pobrania
- 322
- Polubienia
- 20
- Ocena
- 4,33
P
Printablesmkosiedowski
Plustek OpticFilm holder for 135 film
My father lost the film holder for his Plustek film scanner. I've found an excellent model here on Printables designed for 110 film, so I modified it to hold standard 135 film and cut down in size so it fits on Prusa MINI+ (you have to…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
- Pobrania
- 274
- Polubienia
- 17
- Ocena
- 0
P
PrintablesVeracon
Vaultek Lifepod 2.0 Glock 17 Gen5 Insert
🔒 Introducing Custom 3D Printed Inserts for the Lifepod 2.0 for the Glock 17 Gen 5 Insert by Veracon Engineering! Elevate the security and organization of your firearm storage with our custom-designed Glock 17 Gen 5 Insert for the LifePod…
Wydruk około 11,86 €–14,49 € nettoWstępna wycena jednego wariantu
- Pobrania
- 260
- Polubienia
- 57
- Ocena
- 5
P
PrintablesGHop86
Phanteks Evolv Shift XT AIO Mod
Phanteks Evolv Shift XT case modification to fit AIOs over *60mm tall. Made to fit the Phanteks Glacier One 240 30T AIO. But will work with other AIOs as well. The mod was designed to blend in with case. *Will fit up to 70mm tall…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 217
- Polubienia
- 19
- Ocena
- 5
P
PrintablesMoritz Multimedia
Combined Gotek and CF-ide in 3.5" disk drive
I have a Gotek drive and CF-IDE card reader for my Amiga 4000. As I already use the 5,25” bay for a CD-ROM drive, and one of the 3,5” bay’s for the original Floppy drive, I needed another solution. My A4000 has a standard height floppy…
Wydruk około 2,32 €–2,83 € nettoWstępna wycena jednego wariantu
- Pobrania
- 204
- Polubienia
- 23
- Ocena
- 5
P
PrintablesCraftswoman.cz
30 Christmas cookie cutters in 3 sizes | 30 Vánočních vykrajovátek ve 3 velikostech
A collection of 30 Christmas cookie cutters. All models are in three sizes - 3.5, 5.5 and 7.5 centimetres. Collection includes: angel bell fish heart santa skate snow glove snowman tree wreath – Czech – Kolekce 30 vykrajovátek na vánoční…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
- Pobrania
- 187
- Polubienia
- 38
- Ocena
- 5
P
PrintablesCraftswoman.cz
30 Christmas cookie cutters in 3 sizes | 30 Vánočních vykrajovátek ve 3 velikostech
A collection of 30 Christmas cookie cutters. All models are in three sizes - 3.5, 5.5 and 7.5 centimetres. Collection includes: angel bell cookie hat moon ornament snowflake star tree wreath – Czech – Kolekce 30 vykrajovátek na vánoční…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
- Pobrania
- 174
- Polubienia
- 29
- Ocena
- 5
P
PrintablesOnkarkitekt
Onkarkitekt Tenerife Mount Teide Canary Islands Geographical Scale Model
Created from a GIS downloaded model and scaled down for 3D print
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
- Pobrania
- 157
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDeBeard
PC REAR EXHAUST VENT FOR PHANTEKS ECLIPSE P400 CASE
Redirect the airflow from your PC's rear exhaust fans upwards and away from the wall. The purpose is to expel hot air in a direction that prevents it from circulating back into the case through the lower slots. Originally designed for the…
Wydruk około 6,10 €–7,46 € nettoWstępna wycena jednego wariantu
- Pobrania
- 145
- Polubienia
- 26
- Ocena
- 0
P
PrintablesQunie
Hello Kittie Pixel Keychain + Your TEXT / Brelok Hello Kittie ala Pixel + Twój Tekst
Hello Kittie Pixel Keychain + Your TEXT / Brelok Hello Kittie ala Pixel + Twój Tekst Below are videos on how to edit the TEXT on the back of the keychain and make color layer change. How to ADD any Text to your STL file (keychain) in…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
- Pobrania
- 114
- Polubienia
- 22
- Ocena
- 0
P
PrintablesMilan Černohous
Token / coin čtyřlístek
Shopping Cart token/coin Tento čip nákupního košíku je kompatibilní pro nákupní vozíky v EU
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
- Pobrania
- 114
- Polubienia
- 5
- Ocena
- 5
P
PrintablesVeracon
Vaultek Lifepod 2.0 Lid Insert
🔒 Introducing Custom 3D Printed Lid Insert for the Lifepod 2.0 by Vaultek! Elevate the security and organization of your essential gear with our bespoke Lid Insert crafted specifically for the Lifepod 2.0. Engineered with precision and…
Wydruk około 7,75 €–9,47 € nettoWstępna wycena jednego wariantu
- Pobrania
- 78
- Polubienia
- 10
- Ocena
- 5
P
PrintablesSteinamyte
Replacement bracket for Playmobil excavator 3001 / Halteklammer für Playmobil Bagger 3001
Update: This was my first self designed part and it is still in pretty good shape and works very well after nearly two years in service! With the red bracket broken, that holds the arm of the excavator in an upright position, fun was…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
- Pobrania
- 71
- Polubienia
- 2
- Ocena
- 5
P
PrintablesOnkarkitekt
Onkarkitekt Sikh Katar Push Dagger
A historic Sikh Weapon Katar Push Dagger designed in Fusion 360 not an accurate model with the rounded handles, just a simple extrusion of the 2D outline will work on this in more finer detail in the near future
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
- Pobrania
- 71
- Polubienia
- 3
- Ocena
- 5
P
Printableswizhack
Bafang bbshd brake sensor mount tektro auriga comp
FR : Voici une cale qui permet de monter un capteur de frein magnétique fournis par bafang avec le bbshd (pour freins hydraulique) Tektro AURIGA comp qui était monter sur un vélo Btwin rockrider 520 de 2013/2014. Je l'ai dessiné car les…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 63
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBucuCZ
Ručka na kohoutek (roháček)
Náhradní ručka namísto originálních, které nic nevydrží, modelováno na zápustný šroub, ale může se dát i normální. Tisknte alespoň 5-6 perimetrů aby to drželo.
Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu
- Pobrania
- 61
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMuad´Dib
Záložky do knihy se zvířecími motivy - čtyřlístek (Bookmarks to a book with animal motifs - four-leaf clover)
Záložky s motivy zvířecí kůže nebo srstí a čtyřlístkem. Bookmarks with motifs of animal skin and four-leaf clover.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
- Pobrania
- 59
- Polubienia
- 6
- Ocena
- 0
P
PrintablesZŠ Klimkovice
3D SRDCE KE DNI MATEK
Děti upraví a vytisknou 3D srdce, které můžou darovat svým maminkám. V pracovní výchově ho dotvoří pomocí bavlnek a korálků.
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
- Pobrania
- 58
- Polubienia
- 5
- Ocena
- 5
P
PrintablesOnkarkitekt
![Onkarkitekt - Parametric UK Brick (No Mortar) [Construction Series]](https://media.printables.com/media/prints/550828/images/4424281_96fa7e87-a5f9-4a4f-8e95-49642846a5c6/onkarkitekt-parametric-brick-wall-no-mortar.png)
Onkarkitekt - Parametric UK Brick (No Mortar) [Construction Series]
Onkarkitekt designed UK Brick wall, each brick was designed with dimensions of: 215 x 102.5 x 65 mm 10mm spacing for mortar The model was scaled down to fit on the Prusa i3Mk3 Will be printing and testing variations of this with mortar…
Wydruk około 7,68 €–9,38 € nettoWstępna wycena jednego wariantu
- Pobrania
- 56
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPeter Farell
Wee Man Skateboarding on a Build Your Own Tek Deck
Wee Man Skateboarding on a Build Your Own Tek Deck - This is disturbing !! - sorry this sucks. Edit (8/25/2023) - This still sucks.…
Wydruk około 6,85 €–8,37 € nettoWstępna wycena jednego wariantu
- Pobrania
- 47
- Polubienia
- 10
- Ocena
- 4
P
PrintablesPavel Riedl
Náustek k AlcoForce a GTX
Univerzální náustek k alkohol testerům AlcoForce: GALAXY, PRIME, MASTER, PROFESSIONAL, OPTIMA a GTX Original, GTX Smart, GTX Spectrum a asi i dalším... Součástí projektu je i *.f3d (Autocad Fusion 386) Print instructions Materiál: PLA, PETG
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
- Pobrania
- 43
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDratrik
Spring Mount for Brake Axis – Saitek Flight Rudder Pedals
This is a replacement part for the Saitek Flight Rudder Pedals – specifically, the spring holder for the brake axis. The original plastic part broke at the point where the return/centering spring is attached. This 3D printed model is a…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 40
- Polubienia
- 4
- Ocena
- 1
P
PrintablesRoadsideRC
Furitek Slidetech ESC Mounting Plate
This Furitek Slidetech ESC has a cutout on the bottom for airflow and cooling…which is really helpful….except for when looking to double-sided tape mount it to the car. I created this simple mount that allows the ESC to sit off the bottom…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
- Pobrania
- 37
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJellyTitan
Ikea Samla box lid alignment guides for Uncle Ben's Tek mycology
The popular introductory level mycology guide found at r/unclebens recommends using Ikea Samla 4 qt boxes and lids for spawning mycelium to bulk. During the fruiting stage, the lid is flipped and adjusted for airflow. These clips snap…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
- Pobrania
- 36
- Polubienia
- 10
- Ocena
- 0
P
PrintablesRhine_Labs
Xeltek Superpro 7500 7500N Socket Protector
Xeltek Superpro 7500 7500N Socket Protector. I used PLA with prusa MK3S+ default settings but you can use the filament of your choice. Details On My Personal Blog https://www.stevenrhine.com/?p=131304 Facebook Xeltek User Group.…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMakerPy
Phanteks P400 raised feet
These feet raised your Phanteks Eclipse P400 case off the ground, which helps if you have carpet. You'll need two of each model to raise your case off the ground. I printed mine with 3 walls and 20% infill. This might be excessive for the…
Wydruk około 4,08 €–4,98 € nettoWstępna wycena jednego wariantu
- Pobrania
- 20
- Polubienia
- 6
- Ocena
- 0
P
PrintablesRadek555
Stitek na kufr - Plate on suitcase
Materiál PLA i PETG, prádelní šnura 3mm x cca25mm, vteřinové lepidlo nejlépe řidke s delší dobou tvrdnuti . Po uprave jmenovky a tisku vystrihnout jak je naznaceno, potom zalaminovat a vystrihnout kazdy samostatne. Upravitelny stitek v…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
Printablesskribidool
Mateksys 3901-L0X 30x3mm mount for GEP-LC75-V3
Mounting case for matek optical flow and lidar sensor with 30x3mm bolt pattern. Fits GEPRC GEP-LC75-V3 or any 30mm mount. These things are made to pretty shoddy tolerances so I provided the files if you need to nudge the loft for the…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
PrintablesOnkarkitekt
![Onkarkitekt - Parametric Footing Pad Pile Beam [Construction Series]](https://media.printables.com/media/prints/550833/images/4424305_221c7d58-6593-46bd-9e16-653a43aed093/c.png)
Onkarkitekt - Parametric Footing Pad Pile Beam [Construction Series]
This is a parametric design created by myself at Onkarkitekt using Fusion 360 Inspired by my Civil Engineering design experience and education Will continue the construction series when I get spare time and will add additional modular…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesD3n
Replacement cover for ETNA kitchen stove indicator light (TEK161RVS)
The indicator light hole diameter is 9 mm. Top lid diameter is 10.5 mm.
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPavel
another earrings for architects / další náušnice pro architektky
no supports needed
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesOnkarkitekt
![OnkarkitektParametric Universal Column [Construction Series]](https://media.printables.com/media/prints/551022/images/4425822_0ee24510-5089-40db-9f88-84a94980eb85/column-prusa.png)
OnkarkitektParametric Universal Column [Construction Series]
A Universal Column Sized 152x152x23 - Parametrically designed in Fusion 360 and then scaled down to fit into the small bed space of MK3 with Prusa Slicer (maybe more suitable for the Prusa XL)
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCharly BEGOOD
AMIGA GOTEK enclosure Holder
This version is for 18mm shelf if you want another shelf thickness, you can contact me for posting updated file.
Wydruk około 10,22 €–12,49 € nettoWstępna wycena jednego wariantu
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesLuciano Fernandes
Teka Fan Extractor Grid Holder
Grid Holder for Teka Fan Extractor. Used to replace a broken original piece.
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
PrintablesŠárka Voráčová
Archimédův přípitek - objem koule
Pomůcka do hodin matematiky nejen pro výuku objemu těles a Cavaliariho principu , ale i pro úvod do infinitezimálního počtu a statistického zpracování výsledků experimentů. Bez manipulace s 3D objekty mnozí žáci neprohlédnou prostorovou…
Wydruk około 4,39 €–5,36 € nettoWstępna wycena jednego wariantu
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRadim Vystavěl
držák trsátek
vzor pick
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesZŠ a MŠ Libá
Pomůcka pro stavbu geometrických tvarů/těles, názorná pomůcka pro převody jednotek
Žáci si navrhnou, vyměří, naskicují, následně vymodelují a vytisknou jednotlivé díly stavebnice pro stavbu geometrických tvarů a těles. Navrhnou, vyměří, vymodelují a vytisknou výplň (malé krychle).
Wydruk około 4,27 €–5,22 € nettoWstępna wycena jednego wariantu
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLudo B
Theedoosje met persoonlijke tekst. Teabox with personal text. Boîte à thé avec texte personnalisé. Caja de té con texto personal.
Een kartonnen theedoosje ontvouwen en geprint met een persoonlijk tekst erop. Een cadeau doosje. Je kan het maar 1 keer gebruiken om dat het materiaal te dun is. Als je de kanten plooit op de lijnen moet je voorzichtig zijn dat je niet te…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDaniel Rychter
Skládačka Von Neumannovi architektury
Žáci dle předlohy vymodelují jednotlivé části schématu (destičky, šipky). Společně připravíme data pro tisk v PrusaSliceru, schéma vytiskneme a správně poskládáme.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSnappy DIY
T-Track Clamp, T-Nut Halteklammer 100mm M6 für CNC und andere
100mm T-Track Clamp, T-Nut Halteklammer 100mm M6 for up to 50mm Materials Flexible adjustable holder and Knob for M6 Support: yes only in the Slot Infill: 60% Gyroid Infill M6 Set Washer, Screw, Bolt…
- Pobrania
- 1739
- Polubienia
- 489
- Ocena
- 4,75
P
PrintablesEngineer4Fun
Hek lok - A universal print-in-place clamping belt attachment system (Tek-lok belt clip alternative)
The hek lok requires no hardware to attach to the belt, but can use standard tek-lok hardware or M5 nuts/bolts to attach various items to the clip. Print instructions: PETG is an ideal material for the repeated flex of the clip, though…
- Pobrania
- 1678
- Polubienia
- 273
- Ocena
- 5
P
Printablesslippinjimmy
Gridfinity Organizers for Tekton Socket Sets
Tekton 1/4" Drive Metric & SAE Sockets Works great with both regular and deep versions Metric: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 SAE: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 https://www.amazon.com/dp/B07P7WMK4L…
- Pobrania
- 990
- Polubienia
- 241
- Ocena
- 5
P
PrintablesKubajsxDD
Cloverleaf keychain (čtyřlístek klíčenka)
Cloverleaf keychain (čtyřlístek klíčenka)
- Pobrania
- 915
- Polubienia
- 59
- Ocena
- 5
P
PrintablesSilor_
Nejlepší matka - vtipný dárek na den matek (matka roku)
Klasická prusa matka s přidaným textem. Doufám, že vaše matka má taky smysl pro humor :D Na obrázku je vytištěná 150% velikost
- Pobrania
- 814
- Polubienia
- 116
- Ocena
- 4,95
P
PrintablesClough42
8-Channel Relay Module Case (SainSmart/Kootek)
This thing is a protection and mounting case for the popular 8-channel relay boards commonly sold under the SainSmart and Kootek names and by various eBay sellers. The opening in the top of the case helps dissipate heat generated by the…
- Pobrania
- 804
- Polubienia
- 58
- Ocena
- 5
P
Printablesslippinjimmy
Gridfinity Organizer for Tekton Wrenches
Tekton Metric & SAE Wrenches Metric: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 SAE: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 https://www.amazon.com/dp/B00OXUPFDU 6mm x 2mm magnets…
- Pobrania
- 793
- Polubienia
- 222
- Ocena
- 5
P
PrintablesShred
Plustek OpticFilm holder for 110 film
Do you still have some strips of 110 film that were used in pocket cameras back in the 1970s and 1980s? And do you have a Plustek OpticFilm scanner? This is a film holder for 110 films. Just place the film strip into the holder, put the…
- Pobrania
- 777
- Polubienia
- 28
- Ocena
- 5
P
PrintablesJirkaBr
Turbánek na skautský šátek / Scout scarf woggle
Doporučuji materiál PLA (čistější plochy) a trysku 0,25 (detail) Tiskne se s podporami a je možné využít dvoubarevný tisk (lilie mírně přesahuje kulatý okraj). Podle objemu šátku je možné mírně upravit velikost procentem ve sliceru.
- Pobrania
- 774
- Polubienia
- 100
- Ocena
- 4,67
P
Printablespecuriosity
Phanteks HDD Bracket (PH-HDDKT_02)
Modular HDD bracket for older Phanteks cases (Evolv ATX, Pro M, orP400/P400S). Recommend printing standing up so that the mounting face is on the print bed. The screw holes are sized to allow the standard HDD mounting screws. Printed with…
- Pobrania
- 759
- Polubienia
- 37
- Ocena
- 5
P
PrintablesDynamite
License plate dutch / kenteken plaat key chain / sleutelhanger
I have printed some nice keychain licence plate based on the dutch plates. As each number is unique I have added the fusion360 files and the instructions on how to create the plate in a few simple clicks. First download the (Kenteken…
- Pobrania
- 700
- Polubienia
- 53
- Ocena
- 4,67
P
Printablesradiojack
Key ID Caps for Kwikset, Schlage and MinuteKey Key Blanks
Here are some files that you can print very quickly to make color coded key ID caps to help quickly identify that key you need on that key ring that has way too many keys. Three popular key types are provided, Kwikset, Schlage SC1 and…
- Pobrania
- 664
- Polubienia
- 70
- Ocena
- 4,75
P
Printablesmrusk
Twin Engine Saitek Throttle Quadrant Levers
Improved large levers and switch addons for the Logitech/Saitek Throttle Quadrant. Inspired by Diamond DA62. Print the levers twice for Twin Engine, Small Lever can be used for brake or speedbrake. Optional Switch addons (for flaps, gear,…
- Pobrania
- 595
- Polubienia
- 56
- Ocena
- 5
P
PrintablesOliver Martens
Wall / Rig Mount for Asetek Wheels
A Mounting Plate for Asetek Wheels / their type of Quick Releases. The holes are 40mm apart, so that you mount it on a
- Pobrania
- 595
- Polubienia
- 46
- Ocena
- 5
P
PrintablesOliver Martens
Asetek Quick Release 70mm Wheel side
I STRONGLY RECOMMEND PRINTING IT LAYING ON ITS SIDE. There it is! For people who dont want to wait anymore. Here is a reverse engineered Version of Aseteks Quick Release for custom wheels. It has very little to no play and is rock solid.…
- Pobrania
- 568
- Polubienia
- 65
- Ocena
- 4
P
PrintablesGutBomb
Logitech Saitek Trim Wheel for Flight Throttle Quadrant
I've wanted a trim wheel for flight sim stuff for years but the old Saitek model isn't made anymore and examples on eBay are rare and cost a fortune so I decided to make my own. This is built with an Arduino Leonardo, some 3d printed…
- Pobrania
- 538
- Polubienia
- 62
- Ocena
- 4,5
P
Printablesideat0m
The Little Mole (Krtek)
🛠 The Little Mole (Krtek) – 7 cm Height This finely detailed 3D printed model of the beloved character Krtek (The Little Mole) is perfect as a decoration, gift, or collectible. The model is printed with the following specifications: Layer…
- Pobrania
- 535
- Polubienia
- 44
- Ocena
- 5
P
Printablessm_fox
Phanteks HDD/SSD Drive Caddy - PH-HDDKT_02
Replacement drive caddy for Phanteks compatible cases. Supports 3.5" or 2.5" drives with standard M3 drive mounting screws. Original (discontinued) mount from Phanteks : https://www.phanteks.com/PH-HDDKT2.html Printing Recommendations :…
- Pobrania
- 528
- Polubienia
- 32
- Ocena
- 5
P
Printablesvrsn3ptoh
Alientek T80P Soldering Iron and USB Cable Insert Rugged Case
Modified MailBox's Alientek rugged case inserts to include a space for flux on the top and the USB cable on the bottom. Space for three soldering tips, which seem to snap in place quite well. I have included all of the models I used to…
- Pobrania
- 521
- Polubienia
- 93
- Ocena
- 5
P
PrintablesCraftswoman.cz
34 Autumn cookie cutters | 34 podzimních vykrajovátek
34 Autumn cookie cutters including: apple bird campfire cloud coffee corn duck fox hedgehog jar kettle kite knitting leaves mug mushroom nut pear pumpkin raincoat rubber boot sock squirrel sweater tree umbrella
- Pobrania
- 517
- Polubienia
- 74
- Ocena
- 5
P
PrintablesCanabalooza
Logitech/Saitek Heavy Equipment Side Panel Tablet Mount Bracket
Designed to work with the ARKON Drill Base Tablet Mount from Amazon located here, https://www.amazon.com/gp/product/B00PZZYR4K/ Extra hardware required 2 x M5x40mm Button Head Cap Screws and nuts 4 x M4x8mm Button Head Cap Screws and nuts…
- Pobrania
- 502
- Polubienia
- 30
- Ocena
- 5
P
PrintablesMichał
Tek-Lok adapter for Double Mag Pouch
I modified the mounting plate of the Double Stack Race Mag Pouch by CadeyzDad (https://www.printables.com/pl/model/358633-double-stack-race-mag-pouch-canik-glock-mp-cz-sig-). Instead of the ELS mount used in the original it can be…
- Pobrania
- 501
- Polubienia
- 73
- Ocena
- 5
P
Printablesdjos_1475
Simple Tandy 1000 External 3.5" or Gotek Floppy Drive Case
Simpler 3.5" Floppy Drive or Gotek Flash Floppy drive case for the Tandy 1000 EX or HX via my "External Floppy Drive Cable Kit" + 3.5" or Gotek or "External Drive Adapter" available on Tindie. Should also suit Amiga 500's and other…
- Pobrania
- 499
- Polubienia
- 26
- Ocena
- 5
P
PrintablesTycho Ordo
Saitek X52/X52 Pro Spring Spacers(various sizes) + Installation Tool
Wanted a Spacer for the X52 that did not touch the inner spring of my X52 Pro. Blechimmers version was the only one that did that for me, but it was a bit soft so I remade it in a few different sizes: 0.5mm 1.0mm(same as Blecheimers)…
- Pobrania
- 467
- Polubienia
- 33
- Ocena
- 5
P
Printableschuckr
Honeycomb Storage Wall (HSW) Tekton allen key holder
This is DrDodger23 's nice design for a holder for the Tekton allen key set. I made some changes to better work with the honeycomb storage wall. The original design is quite thin and felt a little flimsy when connected, so I did some…
- Pobrania
- 454
- Polubienia
- 79
- Ocena
- 4,86
P
PrintablesJvdW
Casing for lilygo T-CAN485 and cable management holder for Marstek Venus
An enclosure for the lilygo T-CAN485 with visible LED and access to boot and reset buttons. A holder for the enclosure with cable management and a hook to attach the assembly to a Marstek Venus battery.
- Pobrania
- 444
- Polubienia
- 14
- Ocena
- 5
P
PrintablesMailBox
Alientek T80P & SS-02 Insert Rugged Case
Another soldering iron and tips for it
- Pobrania
- 438
- Polubienia
- 70
- Ocena
- 3
P
PrintablesAlex
hydraulic Tektro brake bleed cup
brake bleed cup for hydraulic bike brakes
- Pobrania
- 422
- Polubienia
- 34
- Ocena
- 4,5
P
PrintablesRichard M
Tektro bleed block
Needed to bleed my brakes and discovered I didn't have an appropriate bleed block. So just quickly took a few measurements and printed one.
- Pobrania
- 415
- Polubienia
- 36
- Ocena
- 5
P
Printablestom71
CTEK Charger Plug Holder
Two versions of CTEK charger plug holder, both versions for motorcycle tube frame. Print it from PETG, ABS or PC. Apply double sided tape between the holder and frame and fix it with 2 ZIP ties.
- Pobrania
- 414
- Polubienia
- 41
- Ocena
- 5
P
PrintablesDamiano_PL
Cable clamp clip for Fisher Teknetics Tesoro Garrett Minelab Whites Rutus metal detector
Hello ! I created simple but reliable cable clip clamp for cable of coil to metal detectors. Dimensions are 6 mm cable and 20 mm shaft. Usable for upper (aluminium) shafts of all metal detectors with that dimensions. I use that cable clip…
- Pobrania
- 413
- Polubienia
- 33
- Ocena
- 5
P
Printablescyberbobcity
Magnetic Socket Organizer for the Tekton SKT15311 74-Piece Socket Set
I built this to use on my French cleat wall. There was not a magnetic organizer that exactly fit my Tekton socket set, so I made one. I combined it with some ½" plywood, some bar and cup magnets from Amazon and made a wall mounted socket…
- Pobrania
- 405
- Polubienia
- 91
- Ocena
- 5
P
PrintablesCadeyzDad
Single Stack Race Mag Pouch RUGER Coonan 1911 ELS and TekLock
If you need a size that I dont have, just let me know and I'll get to it as soon as I can!! Cant adjustable from 0 to 70° You do not have to take this apart to adjust the cant. Loosen the arc screw and pivot screw (pivot screw is behind…
- Pobrania
- 400
- Polubienia
- 53
- Ocena
- 5
P
PrintablesStepstich
The Tekhenu lamp
The Tekhenu lamp All parts of the lamp are optimized for FDM 3D printer. They are designed to be printed without supports, and are ready to assemble without additional post process. Dimensions: 241.5mm X 69,7 X 69,7 The lamp consist of…
- Pobrania
- 399
- Polubienia
- 160
- Ocena
- 4,8
P
Printablescyberbobcity
Magnetic Ratchet & Extension Organizer for the Tekton SKT15311
I built this to use on my French cleat wall. There was not a magnetic organizer that exactly fit my Tekton socket set, so I made one. This corresponds with my socket organizers, linked below:…
- Pobrania
- 398
- Polubienia
- 79
- Ocena
- 0
P
PrintablesKitty
Garmin Oregon 600 navigation button fix. (Oprava tlačítek navigace Garmin Oregon 600)
The Garmin Oregon 600 Navigation is otherwise a sturdy device but may become non-functional due to the degradation of rubber buttons over time. The recommendation from the manufacturer is to buy a new device, which is very environmentally…
- Pobrania
- 396
- Polubienia
- 6
- Ocena
- 5
P
PrintablesLamibi
Rudder Pedal gear for Saitek/Logitech G Flight Simulator Rudder Pedals
This was made for a friend who broke their rudder pedals. Successfully printed and used with ABS Pro with 0.1mm layers and 100% infill . It might make a difference to organise the infill layer direction to run parallel with the critical…
- Pobrania
- 391
- Polubienia
- 19
- Ocena
- 5
P
PrintablesRustyNutsDesigns
Rusty-Lok: The Tek-Lok alternative
**Update 1/22/2017: I uploaded the .step files for your remixing pleasures. This is a printable "teklok" style mount. Use this for your mag carriers, shotshell caddies, knife holsters, whatever you want! I don't recommend using it to…
- Pobrania
- 390
- Polubienia
- 68
- Ocena
- 5
P
Printablessamh
Matek ASPD-4525 Pitot Tube
Reference CAD files for Fusion 360 for design of mounts, etc. Measured from part Fusion 360 f3d file included
- Pobrania
- 382
- Polubienia
- 7
- Ocena
- 0
P
PrintablesElement_77
Internal 3-1/2" Gotek case w/ 0.91" OLED Display Window
FILES UPDATED A standard internal 3.5" Gotek case with 0.91" OLED display window. You should be able to re-use the original Gotek screws with this design. I had just hot glued the OLED screen in place. Print Settings Printer: Da Vinci 1.0…
- Pobrania
- 376
- Polubienia
- 17
- Ocena
- 5
P
PrintablesMaverick0197
Alientek T90B Rugged Case
Alientek T90B Rugged Case I was in search of a carry case for my T90B and couldn't find one but very much liked the design by @EddieCoast for the Pinecil V2.| After taking inspiration from him and several others (see the remix links), I…
- Pobrania
- 346
- Polubienia
- 49
- Ocena
- 5
P
Printablesashpool
Tektro Bleed Thingie
Unlike the Shimano disc brakes, you need these little thingies to attach the brake fluid syringe and top off cup on the Tektro disc brakes. I had no such made these instead. I must say they work pretty well. If you have the Shimano bleed…
- Pobrania
- 334
- Polubienia
- 39
- Ocena
- 4,67
P
PrintablesWilli
Rugged Box for CTEK battery charger
Description: A box for the CTEK battery charger. I was inspired by Whity's " Rugged box " but I don't use Fusion 360 so I redesigned it. Printing: Layer height: 0.2 Supports: No Material: PETG Assembly: 6 x M3x40 screws are required for…
- Pobrania
- 321
- Polubienia
- 64
- Ocena
- 5
P
Printablescaveduck
Socket trays: Tekton / universal 1/2" drive SAE
This is part of a mega-project to create a comprehensive set of socket organizer trays. Specifics for this print: Manufacturer: Tekton or compatible socket sets with all sizes, no gaps Drive size: ½" Size units: SAE Notations for layout…
- Pobrania
- 320
- Polubienia
- 50
- Ocena
- 0
P
PrintablesHexiBase
HexiBox Series: Fountek FR89EX / Dayton DSA90-PR Studio Monitor.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
- Pobrania
- 319
- Polubienia
- 38
- Ocena
- 0
P
PrintablesTim Malmgren
Ctek MXS 10 - wall mount
A wall mount for your Ctek MXS 10 battery charger that will help you organize the cables for easy use. You can easily mount it on the wall using screws and plugs through the two 4mm holes. Can be mounted perfectly on plaster, wood or…
- Pobrania
- 314
- Polubienia
- 27
- Ocena
- 5
P
Printablessonicx
APS adapter for Plustek OpticFilm scanner
Fits at least 8200i. Feed film into adapter - align negatives with the frames. Scan 6 negatives, retract to position 1. Pull film forward 6 frames. Repeat until end. Do not forward to frame 7 until the last photo. Absolutely room for…
- Pobrania
- 298
- Polubienia
- 13
- Ocena
- 5
P
PrintablesKistek
Pastamatic Spindle Retention by Kistek
Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…
- Pobrania
- 297
- Polubienia
- 43
- Ocena
- 4,5
P
Printablesrumcajcz
Asetek holder for Simagic P-HPR haptic reactor
Allows you to mount the Simagic Haptic reactor on Asetek pedals. First attach the reactor to the bracket and then mount it on the pedal. No extra screws are required for mounting (to install on the pedal, the screws holding the pedal are…
- Pobrania
- 296
- Polubienia
- 15
- Ocena
- 0
P
PrintablesMickeL
Wall holder for Ctek mxs 3.8
Holder for hanging your charger on the wall. It should work for other chargers of similar sizes.
- Pobrania
- 287
- Polubienia
- 26
- Ocena
- 5
P
PrintablesAnnaV.
Dice set (Set kostek)
English: Standardized dice with variety of constructions contain D4, D6, D8, D10, D12, D20, D33 Česky: Standardizované kostky s mnoha variantami D4, D6, D8, D10, D12, D20, D33
- Pobrania
- 286
- Polubienia
- 58
- Ocena
- 5
P
Printablesdan188
Amiga 500 Gotek bracket
This is a remix of the Amiga 500 Gotek bracket by CrazyBob to work with the new 2022 gotek models that come with a larger oled display and rotary potentiometer. Category: Computer
- Pobrania
- 284
- Polubienia
- 18
- Ocena
- 5
P
Printablessheldor
Logitech G Saitek Yoke Clamp
This is an alternative clamp for the Logitech Saitek G Yoke. It allows the yoke to be used on desks that may have an under frame that prevents using the clamp that comes with the yoke. Like the Ikea Kullaberg desk. You will need to print…
- Pobrania
- 284
- Polubienia
- 14
- Ocena
- 5
P
PrintablesRomain
Gear Saitek rudder pedals
============== Gear replacement for Saitek rudder pedals ============== Pièce de remplacement pour le palonnier de chez Saitek. La pièce d'origine ayant cassée, j'en ai redessiné une. Je conseil une impression en PETG - infil 100%…
- Pobrania
- 282
- Polubienia
- 11
- Ocena
- 0
P
PrintablesPrinter Fun-UK
Kasparov Chess Computer spare Knight / Horse (SciSys / SaiTek)
Spare Parts for the Vintage Kasparov Chess computers, made in the 80s by SciSys or later SaiTek. **UPDATE: I have remade this model more accurate, actual looks quite close to the original now. There is a version with and without the…
- Pobrania
- 276
- Polubienia
- 14
- Ocena
- 5
P
PrintablesJonas
MATEK F405 Wing v2 bracket
Since I did not find a suitable bracket which was sturdy enough and did not interfere with the wiring, i designed my own. It can be printed without supports. The top plate has an opening for the build-in LED light and a few cutouts in the…
- Pobrania
- 274
- Polubienia
- 8
- Ocena
- 0
P
PrintablesPumpEngineer
Tekton Socket Holders 1/4, 3/8, and 1/2 Metric Gridfinity
***V2 models updated 3/8" 20mm due to hole being over sized These are socket holders for Tekton's current sockets ¼" models are for NON IMPACT sockets 3/8" and ½" models are for IMPACT sockets I found that the dimensions from Tekton's…
- Pobrania
- 272
- Polubienia
- 26
- Ocena
- 0