Wyniki wyszukiwania: temp

All in One Temperature & Bridging Tower - PLA & PETG GCode included

A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…

Temp Tower PLA, PETG, ABS/ASA for Prusa MINI+, MK3S+ and MMU2S

Download, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. Every…

Temperature Tower ready gcodes (ABS, TPU, PLA, ASA, PETG,)

Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…

Contemporary Dice Tower/Storage v2

Remodeled my original Contemporary Dice Tower/Storage from scratch to make it printable without supports and provide a fully enclosed mini storage so that it's not possible to get jammed in the outer sleeve. The mini storage compartment…

Stringing Test / Temp Tower

Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…

Prusa Mini Temptower for PLA, PETG and ABS

This is the well known Temptower from Tronnic as .3mf to load into PrusaSlicer as well as sliced and ready for the Prusa Mini. Just print the gcode. All gcodes were created with PrusaSlicer 2.2.0 using -) PrinterSetting: "Prusa Mini"…

Temp Tower PLA/PETG/ABS/ASA for MK4

Please don't forget to like the model if you find it useful. Thanks!

Coin roll helper with coin roll paper templates (euro)

When I was looking for templates for printing coin roll paper for private use, I noticed that there were no templates to be found anywhere. So I quickly created some myself. These are print templates for private purposes, so the sizes are…

Zen Bridge and Temple

Zen Bridge and Temple. Print separately. Size to your preference.

PLA Short Smart Compact Temperature Calibration Tower

Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…

Temp and Bridge Tower

This is a temperature and bridging test tower to use to tune in filaments Tower has 3 different with bridges between 2 towers. Each tower is separated with a narrow part to test out layer adhesion strength by trying to brake the tower at…

Temperature towers for PLA and PETG. GCODE for ELEGOO Neptune 3 Pro included

Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro

Core One / Core One + / Core One L w/o MMU3: Improved All-In-One Temperature and Bridging Tower -- High to Low Temps PLA/PETG/ABS/TPU (Remix)

See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…

Prusa XL Temp Tower for PLA, PETG, ABS

Building on the awesome job of @Tronic with the Temp Tower, I have remixed one suitable for the Prusa XL. The supplied G-Codes are sliced using PrusaSlicer 2.6 Release Candidate 1 at 0.15 layer height using all stock Prusa Profiles for…

"temple of venus" desktop and pendant lamp

Desktop and pendant lamp with cableholder function. Lamp shade inspired by the surface structure of the temple of venus and roma in italy. https://www.instagram.com/made3d.de/

Updated 220811 Ultimate All-in-One Temperature and bridging Tower (Auto Temp Setting)

Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…

Temperature tower with bridging test | PLA GCode included

Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…

MK4S w/o MMU3: Improved All-In-One Temperature and Bridging Tower -- High to Low Temps PLA/PETG/ABS/TPU (Remix)

See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…

Template Ruler with Electrical Diagrams

Handy ruler with extras 📏⚡ • Holes for measuring wire & component diameters 🧰 • Connector size templates 🔌 • Basic electrical symbols ⚙ • Centimeter scale for precise measurements 📐 Perfect tool for makers and electricians! 🛠✨

Stencil template Dinosaurs

Stencil for drawing with dinausaurs

Circle Template

Description Circle template, from 1/4 inch to 2 inches, in 1/8 increments. Corners are radius gauges, 1/4, 1/2, 3/4 and 1 inch. Printing Make sure your bed adhesion and first layer is spot on, details in the numbers are the most…

Notes To-Do template and box

Useful combination of a box and templates for your notes. The templates come in three versions: To-Do list, with a tick off field lines, for longer sentences blank, for you to add your logo The box keeps your desk clean and organized.…

Contemporary Napkin Holder

I designed a napkin holder for the modern home. The part requires very little infill for the first 5mm. Slots were added to the bottom to decrease the amount of plastic needed to print.

Telecaster Guitar Body Template

I created the template based on a Telecaster body model by Gustavo Rocha in GrabCad. I used it for a guitar I'm currently building. There are six parts to the template, each part sized to fit on a Prusa Mini+'s build plate. I printed them…

Contemporary Trophy

Design: This contemporary design trophy is designed in Fusion360. Print: Print is quite simple, you can either print base and top separately with different color or you can directly slice it as multi-color print. The one from photos is…

Torre temperatura PLA, PLA+ Gcode para Artillery X1

Gcode ready to print, to test temperatur lvl of artillery. from 220 to 180 °C Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: everyone PLA, PLA+ Notes: just connect and print. Category: 3D Printing Tests

DIY Workbench Festool MFT drilling template (MMU)

Gabarit de percage établi Festool MFT DIY Workbench Festool MFT drilling template 96mm

Nativity Cut: Young Contemplating Girl

Young Contemplating Girl. I have a few models that I worked on for the nativity set that dont quite fit in. I realized when I added the other models to the plate for size comparisons that the style was just way to different to fit. Enjoy.

Prusa Mini Temptower for PLA, wait for temperature change before continuing the print

Based on the "Prusa Mini Temptower for PLA, PETG and ABS" from steveleader (original Tower from Tronnic), just included commands to wait for the hotend to heat up before continuing the print: PrusaSlicer 2.3.0, Expert mode, tab "Print…

PLA/PETG Temperature towers + GCODE for Ender 3 V3 SE

Temperature tower for PLA and PETG including the ready made G-codes for the Ender 3 V3 SE.

Contemporary Dice Tower & Compact Storage Solution

I've designed a dice tower that also doubles as storage for your dice and a single mini, perfect for Dungeons and Dragons and other tabletop RPGs. I've built in a knurled ring around the bottom to easily rotate the inner tower to expose…

Temperature tower from 245 to 210 PETG

G-code is available with related modifications. A 0.4mm noozle printed on an Ender 3 is used.

Router Corner Template(s) - Imperial and Metric

Update Dec. 24, 2022 : I added a new set of templates with recessed text labels. These new templates allow for a flush top so that a router can be used on top of the templates. The new templates fit the old holder. The new templates have…

GoPro Mount Template (Editable)

GoPro mount to attach the action camera to all possible surfaces with the help of double-sided adhesive tape. In my case to a fullface helmet. There is a hole where the hexagon screw can be easily attached. I would be very happy about any…

Temperature & Humidity Meter Stand

I have bougtht several round Temperature and Humidity Meters to put them inside the filament spool holders. I have used one in my 3D printer chamber for temperature and humidity indication. These meeters are tiny and round. I could have…

Alfa Romeo 147 (and other contemporary) passenger airbag cover clips

Print in something that is not brittle, preferably with a brim. There are no supports required as the model features in-model supports itself (between the lowermost plate and the one above). Make sure to enable “detect thin walls” and…

Temprature tower PLA 200-230

I couldn't find a temperature tower I liked because I normally use between 210 and 220°C in PLA. I did not find a simple tower that gives me idea of stringing, bridge and surface in the temps I wanted unless starting at very low temp.…

Suzuki V-Strom tempomat V.6

(CZ) Vylepšená verze tempomatu Fialový a oranžový díl se slepí acetonem. (EN) Improved cruise control version The purple and orange parts are glued together with acetone. Print instructions Rafts: No Supports: No Resolution: 0.2 Infill:…

6 animals footprint paws template stencil keychain

It’s 1 mm high with additional 0,4mm for the text. You can easily change colours between layers for 2-colour effect. Scale it up as you need on axis X and Y (I don’t recommend scaling down).

Stringing test with temperature change every 5 mm

Temp of nozzle is the main cause of stringing. Print this gcode before trying other adjustments. It starts at 220C, and automatically decreases 5C after each 5mm increments, ending at 180C The picture shows the results when filament is…

PLA Temperature & Bridging Tower MK4S High Flow 0.4mm Nozzle GCode

All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…

Ender 3 CR10 PLA Petg temp tower Gcode

Ender 3 CR-10 PLA Petg temp tower. To change the temperature automatically download the Gcode

DS18B20 (Waterproof) Temperature Sensor Mount

Just a simple DS18B20 Temperature Sensor mount. I printed it with PLA but if you need it in a place that gets hot you better use something that can withstand the temperature. Slide the sensor in from the top or the bottom. It has a tight…

Jain Temple Column Cup

Cup/Vase made from the details of a Jain Temple Column.

Small Parametric Temperature Tower

A Tiny Temperature Tower A small temperature tower you can tune to your liking, using OpenSCAD's customizer. I've included gcode for the Mk4 with input shaping. If you'd like me to provide a specific configuration of temperature range and…

Temp and Bridge Tower - GCodes for MK4 and XL

Resliced temp&bridge tower for MK4 and XL slicer 2.6.0, PLA, brim, 0.20 DETAIL MK4 - 0.4mm XL - 0.6mm nozzle resliced for new FW 5.1.0 slicer 2.7.0, PLA, brim, 0.20 STRUCTURAL MK4IS - 0.4 nozzle XLIS - 0.6 nozzle

Drywall cutout Templates for outlets/switches

2 gang box is 4.5x4.5 cutout so conduit box can mount low current box cutout for single gang snap-in box

Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silika / humidity + temperature Sunlu JAYO dryer S1 + silica

Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silica Ich habe mir eine Temperatur und Luftfeuchteanzeige für den Sunlu /JAYO Dryer S1 erstellt (Inspiriert durch andere Thingiverse Konstruktionen) Benötigt wird eine M6 Mutter + M6…

Oakley jawbreaker glasses temple (arm) replacement

Temple (arm) replecement for oakley jawbreaker glasses oakley-left-arm-temple.stl contains bent temples, so their don't fall of your head oakley-left-arm-temple-flat.stl file contains temples which are not bent, so you can bend them…

Japanese Temple Guardian

Japanese Temple Guardian

Maya Temple Gecko Hide

Maya designed temple for geckos hide. Used for a leopard gecko enclosure based on this theme.

Systemprofil-Eckverbinder 20x20

Systemprofil-Eckverbinder für Aluminuim-Systemprofile der Abmessung 20mm x 20mm. in das Loch in der Mitte des Alu-Profils (4,3mm) muss ein M5 Gewinde geschnitten werden. Die drei Alu-Profile werden mit M5x16 Senkkopfschrauben an dem…

Box for a STC-1000 temperature controller

STC-1000 is a nice little temperature controller that can be used to control both a heater and a ventilation in an enclosure. 12V and 220V versions are available for 10-15 EUR (Amazon) or $3-5 (AliExpress). This box is designed to be…

The Most Tempting Mouse.

TempTower 220-265 / 180-225 with .3mf Easy to edit

M104 S260 ; set the current hotend temperature to 260 degrees Ender 3v2 neo

Pocatello Temple

This is a small model of the Pocatello temple of the Church of Jesus Christ, based on Colton Jensen's design . See Also Cedar City Temple

Remixed Temperature Tower for Elegoo Neptune 4

Extruder Nozzle : 0.4mm Layer Height : 0.3mm First Layer Height : 0.35mm Top and Bottom Solid Layers set at 3 Seam Position : Aligned Seam Gap Distance : 15% Scarf Joint Placement : Nowhere Perimeter Generator : Arachne Fuzzy Skin : None…

STC-1000 Temperature Sensor Clip

A clip to securely hold a standard STC-1000 temperature sensor in place. Can be attached to any surface using a Command removable strip or double-sided tape. Infill: 100%

INDX Temp Tower (PETG & PLA GCODES)

Updated for new 6.9.0 FW and configuration files (22-Aug-26) I took fuchsr's famous and excellent remix of Tronnic's Temp Tower. I sliced it and created G-Codes for each tool for simple and rapid use as some people may be running a mix of…

Hatchbox ABS Temp Tower MK3/s Gcode

Original didn't provide Gcode. This is for people that just want to download and print without knowing how to change Temps. This is the right thing for you. I did not create this model, I changed all the temps to be ready to print. Enjoy

Doll Clothes Templates

Basic sewing patterns for barbie dolls (original size). If you want, add for example pleats, fastenings and slits for better fit. You can also add decorative beads, buttons, frill, lace, bow, pocket…I recomend an elastic fabrics. Cut the…

Temptation Never Needed Clothes.

Bandsaw Template Guide

I wanted a guide to help me use the bandsaw to cut out curves more accurately. Instead of following a line drawn on the wood I place a template on the surface, the guide follows that template exactly. This uses 1 Magswitch GripRight 90…

ARTILLERY GENIUS temperature tower

ready to print :)

Miniature Park Bench - Modern/Contemporary

I like to design and print miniature benches and this is the first one I want to put out into the world! I think this is a bit of a more modern style of a bench with a modern/contemporary take on the "concrete" sides that hold the bottom…

TempTower for MK4 InputShaper GenericPLA 0.2mmSpeed

Profiles 0.2mm Speed and Gereric PLA are unmodified, just like they come from the slicer . PrusaSlicer Version ist shown in the pic section, as a screenshot. Greetings to the world !

Universal Eyeglass Temple Arms – Replacement Side Frames for Optical Use

Durable side frames (temples) for mounting above the ears 03.12.25 - Model Uptaded and Replaced. No Supports needed anymore. Holes diameter 1.5mm Distance from Glass Frame 2.5mm

Temperature Tower - All Purpose

This is not a direct remix but a similar design to the Crua9 temperature test tower ( https://www.thingiverse.com/thing:3347967 ). Crua9's design has been my favorite thus far but I wanted free reign to choose my temperatures not dictated…

Xiaomi Temperature and Humidity Sensor Holder by RSCtech

Xiaomi Temperature and Humidity Sensor Holder by RSCtech You can use screw or glue to fix it. It keeps the sensor stable thanks to its design, even upside down. It can be easily removed when replacing the sensor battery.

Craftsman Router Base Plate Template Guide

Caution: Routers create large amounts of force. Use carefully and at your own risk. This is an alternate 6 inch base plate for a Craftsman Router with 3 screw holes. It was designed to replicate the metal guide bushings that can be…

Ikea Lack Drill Template

If you are making an Ikea Lack enclosure (for example https://blog.prusaprinters.org/cheap-simple-3d-printer-enclosure_7785/ ), you might want to add a third lack table at the bottom to raise it up to a more useful height. There are a…

Alley Temptation.

Contemporary Colosseum-Style Stadium: A 3D Printed Prototype

This 3D model, designed with the visual assistance of DALL-E, is a colosseum-style football stadium that showcases contemporary architecture while attempting to simulate an architectural studio's prototyping workflow. The primary goal of…

Gridfinity Porter Cable Router Template Guide Set Bin

A Gridfinity bin for the Porter Cable Router Template Guide Set. The set is the 42000, and each of the guides have the cooresponding ID etched into the hole. The gridfinity bin is 4x2. It is for the PORTER CABLE Router Template Guide Set…

Sine/Sin/Sinus Template

I create template for sine function.

Ultrasonic outdoor sensor JSN-SR04T and waterproof DS18B20 digital temperature sensor

This is a mounting bracket that holds a JSN-SR04T ultrasonic sensor and waterproof DS18B20 temperature sensor for mounting to a 1" square tube. This is part of a project to measure the water level of a creek. The sensor will be extended…

Drilling template for European cylinder lock

This tool is necessary when changing the type of lock with one that does not have the same key axis; the operation is more difficult to explain than to do. Anyway: from the external side, drill with the hole saw using the hole in the…

Transparent Filament Temperature Test

Transparent filament temperature test that changes temperatures for each cube that is printed with the best setting possible. Settings are the same as from this guy . Used filament: Nebula Filament PETG Clear (Natural)

Temperature & Humidity Meter Stand or holder for Prusa i3 MK3 360 degrees

Temperature & Humidity Meter Stand 360 degrees Temperature & Humidity Meter Holder 360 degrees for Prusa i3 MK3, MK3S & MK3S+ https://www.amazon.co.uk/dp/B07QH1MYPY?ref_=cm_sw_r_apin_dp_DXMTDF2ASNR0AGST3CJ2&th=1 Filament: PLA or PLA+ or…

Holder for XIAOMI Digital Temperature

Petit support mural à visser ou scotcher pour le thermomètre Xiaomi

Contemporary Magnetic Door Stop

This is a simple magnetic doorstop activates when you position the door over it, but otherwise allows the door to function normally. When inactive, it has a low profile, easily allowing a vacuum cleaner or mop over top of it. Bill of…

Frosthaven Character AoE (Area of Effect) Templates (All Character Remix)

This is a remix that uses the scad file provided but the original designer to make a template for every Frosthaven class. I added the Gcode for a .25 nozzle and noted the color I use for each character in the filename. note some…

Oakley Hyperlink temple

This is a simple replacement for Oakley Hyperlink eyeglasses temple. Organic support is required for lock pin only (see .3mf file).

Temp Sensor Module for Environmental Monitoring - DS18B20 1-Wire

About the print This print is part of a larger project I am working on to implement Mycodo into my hydroponic garden. The goal is to have several modules that can connect independently, with ‘break out boxes ’ for different sensors,…

Deus é bom o tempo todo

Placa decorativa 196x175x3mm

Temperature sensor holder for Prusa MK4 Filament Guide

Deutsch (English below) Zubehör für den Optionalen Filament Guide von Prusa. Ein halter für den Temeratur sensor der Enclouse. Er wird einfach auf den Spulenhalter geschoben wo er einrastet. Zur zusätzlichen Fixierung kann er auch mit den…

THIRDREALITY Zigbee Temperature/Humidity/Vibration/Garage Door Tilt Sensors - Holder

THIRDREALITY has several sensors that are all 2.2" x 2.2" x 0.48" I have several of these THIRDREALITY Zigbee Temperature and Humidity Sensor Lite's and needed a way to mount them without permanently sticking them to a surface. So I made…

Piano Keyboard Template

Simple plantilla para piano o teclado para poder apuntar melodias cuando lo necesites , se a impreso en PLA Winkle negro , disfrute imprimiendolo y modificandolo a su gusto . Simple template for piano or keyboard to be able to write down…

WiFi sign template / předloha WiFi cedulky

Předloha pro vytvoření WiFi tabulky s jménem sítě (SSID) a heslem.

Spell Template - Cleric Twilight Sanctuary 5e

This is a remix from: https://www.thingiverse.com/thing:2808346 where I personalized the 30 foot radius circle for the specific spell - Twilight Sanctuary for the Twilight Domain Cleric. In the original file, the model was too tall and…

Hygromter/Temperature/Voltage Display Case

When I finally assembled my Prusa i3 Mk3, I wanted to design something useful, to test the performance of the printer. Because I already bought some Hygrometers for my filaments, I decided to design a simple case for them. So this is…

Temporary road sign (1:8)

1:8 scaled accessories for RC models (for 3Dsets.com/ Landy 4x4 / Wagon 4x4)

Sliding Modular Whiteboard Drawing Templates

Now with sliding attachable sides! Now with Extension plates. New Coordinate frame plate I made this modular plate so it is possible to snap plates together with the peg-in-hole snap method. They can be used to quickly make todo list on a…

BSP thread measurement template / Plantilla medidas rosca BSP

For non-Spanish speakers: uncuarto.3mf = ¼" Female. uncuartoM.3mf = ¼" Male. tresoctavos.3mf = 3/8" F. tresoctavosM.3mf = 3/8" M. media.3mf = ½" F. mediaM.3mf =½" M. trescuartos.3mf =¾" F. trescuartosM.3mf = ¾" M. unapulgada.3mf = 1" F.…

Crosscut saw 90° angle template

Most dry cutters do not have industrial quality and therefore adjusting the cutting corner may be hazardous. The most used corners are 45° en 90°. The template has a rill that fits in the blade crevice. If you fasten the guard against the…

Water temperature sensor shaft for swimming pool plumbing

Swimming pool water temperature monitoring needs a sensor whitch musnt be in contact with the water. Threfore you have to use a shaft, where you put sensor probe in. I made one for you. It has stadard outher thred G1/2 and also metric…

100mm temporary vent pipe cover

This is a temporary 100mm vent pipe cover making a tight friction fit with the pipe. The mesh keeps out insects. The project I used this in can be found here: https://jamesdaniel.github.io/bathroom_vent_project.html. I printed this model…

Xiaomi Mi Temperature and Humidity Monitor 2 housing replacement

The 3D model is a custom housing designed specifically for the Xiaomi Mi Temperature and Humidity Monitor 2. This model was created to provide a solution for those who may have encountered the issue of their original housing melting or…

Temperature & Humidity Sensor Stand

A simple and functional stand designed to hold a small temperature and humidity sensor at the perfect viewing angle. The model is split into two pieces to ensure clean printing without any supports — just print both parts, add a small…

Crosscut saw 45° angle template

Most dry cutters do not have industrial quality and therefore adjusting the cutting corner may be hazardous. The most used corners are 45° en 90°. The templates has a rill that fits in the blade crevice. If you fasten the guard against…