1155 modeli
I have designed this box for condoms, tampons and stuff which is almost perfect: https://www.printables.com/cs/model/371842-smooth-pocket-case-for-condoms-durex-tampons-etc The only downside is that you have to trim the corners of condom…
This is largely inspired by https://www.thingiverse.com/thing:5028257 by kageii Features This is a stand that achieves a steeper angle then the original feet, while allowing the thumb cluster to stay at any angle. It can also fold…
Reason for redraw Checked with SO who will use it most. She requested it to clamp to the box, so when you pick it up for closer inspection it won't fall off. The slit has two protrusions which creates a distance slightly less than the…
A delightful model of two standing hearts that can initially be separated (one for each of you), and then placed together for a beautiful sculpture. Included are a couple of tray designs as well that you can use to optionally turn the…
This is a board to hold the pieces for the board game Hey, That's My Fish. It's a fun game and good for kids, but it lacks a piece to hold the pieces in formation. That's where this board comes in. There are three main differentiating…
Pin that supports the trunk lid of a Peugeot 208. On the picture there is the original part and the printed version.
Hi, I remixed the stand done by tritschi because after installing the excellent led light bar for prusa mk4 , it was impossible to put the case where it originally stand. Also I wanted it to be near the logitech c310 camera stand by…
In the Netherlands we have this saying: “You can't always roll a six". For when stuff isn't going as you wished. In dutch: “je kunt niet altijd zes gooien” So to prove that wrong I made this silly cube that has six indents on every…
This item is no longer needed in my latest path design - https://www.printables.com/model/555238-mmu3-filament-path-design What this is: A single strong mount clip to attach the Prusa MMU2S Spool Holder trays specifically to the Home…
This is a fidget spinner that you attach to some kind of base with a single screw. It consists of several 3D printed pieces, modified ball bearing and possibly several washers for M5 bolts. The modified ball bearing in question is the 608…
Model is a 25mm coin with Recycle triangle <1> and PETG on both sides. Each coin consumes 40 cm of 1.75mm filament using a 0.4mm nozzle sliced as Prusament PETG. This print is useful for consuming the end of a roll that is too little to…
Squeeze to open jaw and it will automatically close when let go. Use it for binders, chip bags, or anything that needs organization.
Intro I first want to thank Szkandera.Jan (@skandalf_3025793) for their amazing PrintMark model, which sparked the creation of this design! I found their model to be very creative and cool, so I took it one step further. Introducing the…
thank you vnow for the idea the main idea was to make a chair that no matter how much you turn never appears to point in a direction!
Update(8/6/23) : Added a low-interference version for anyone having problems with collisions with their toolhead cover. This one is harder to print, but it should solve the issue for people where they get rubbing with the support arm.…
The doors are assembled by using filament as hinge rod. Insert it from bottom and up. The fridge is sized to fit with Sylvanian families the material should be thick enough to be re-seized to also fit Playmobil. Just contact me if that…
SNAPTOR, durable strength! Printed in one piece and activated with a single snap, the SNAPTOR is a compact clamp that’s always ready to bite. Its integrated preloaded spring mechanism is activated after printing. No screws, no assembly,…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
What is that? What's in there? Well in that case. __________________________________________________________________ 🧡 Let’s Both Earn Some Prusameters! If you like this model and are thinking about getting a new Prusa printer, use my…
I want you to be able to organize your tools using the Skadis pegboard system and keep them within arms reach. This portable panel lets you set up an organized swatch of tools and materials and carry them over to wherever you're working.…
ATTENTION: CONTAINS ONLY DRAWER BOX; DRAWERS ARE FOR CLUB MEMBERS ONLY It is a perfect solution for organizing your small items. The modular package design allows you to stack multiple boxes on top of each other and provides a functional…
Edit (2023/10/01): There is now an updated version of this model available here: https://www.printables.com/model/600333-dragon-that-hangs-on-your-monitor Back by popular demand! Finally got around to finishing the model, so here it is. I…
Why calibrate Elephant foot compensation at all? Well, I have to admit that I used “standard” values for EF compensation for years. But I stumbled over this matter when designing my printed pinhole lens where I use the EF compensation…
Please Share Your Makes and Give It A Like! I have a friend who loves ZYN, however, he said he doesn't like the fact that the can shows in his pocket all the time, plus with all the other “everyday carry” stuff he has, the ZYN can takes…
All credit for the initial design goes to Printin'Monkey . The initial design was a great start, but it didn't work for me 100% and my setup. My Galaxy s24 in a rokform case was too thick so I expanded the cradle to 18mm to accommodate…
check out the video of these tuners: The purpose of 3D printing guitar tuners is mostly for DIY musical instruments and also someday I will design a guitar that is 100% 3D printed. In addition they can be used as replacement parts on an…
Intro Tiny, functional pillbox designed for the one pill that matters most. This ultra-compact container fits a single pill perfectly and clips right onto your keyring — ideal for daily medications, vitamins, emergency pills, or any…
ABS works well. ****Added 2 new clips for thinner (Creality) spools and larger cardboard spools with an added rim.
*** Updated version with additional bracing for stability *** I had good success with my steel string guitar , but it required a huge printer. For folks wanting a more manageably sized project, I decided to try a mandolin instead. The…
Fits the newer Ender 3 Pro without needing to reverse bed bolts! The case is 52mm tall, so you can double check the bolt under your bed won't rub into the case. The 3rd photo shows which bolt to watch out for. This is a remix of…
This is just a fun variation on my own 3.5" floppy disk model commemorating 30(ish) years of DOOM. For the original really great ‘blank’ floppy model, click here .
Here's my version of "That Gun" From Fallout. Just a tad bit of nerd info, This gun is an Easter egg of the LAPD 2019 pistol from Blade Runner. I scaled it up to 200%. You might want to sand the connection points so they fit if your…
I was having a lot of fun with RAWICE511's throwing card, so I thought I'd bring it to Printables! It does make a whistling/whooshing sound when thrown right, but it takes practice. Printing in PETg or ABS is recommended since it has more…
Introducing Kubic, an ITX PC Case designed for your SFF (Small Form Factor) build, that can take a pretty beefy system for intense gaming sessions and taking cues from the GameCube and the old Power Mac G4 Cube. (Mine also looks like a…
Needed to mount my HP Elitedesk 800 G5 Mini under my desk. Quickly sketched up this design with slotted holes for easy installation. Mount the computer upside down, so it can suck cold air from "top cover". Print Settings Printer Brand:…
I needed a keycap puller that won't scratch my keycaps so I 3D modelled one that resembles the popular one with metal wires. You need to print two pullers and insert them into the holder. They have holes so you can stick a piece of…
Notice that if you notice this notice, you will notice that it's not worth the notice
Of all the filament clips I have received and printed, I have always been happy with the filament clips supplied by Sunlu although they are not compatible with all brands of filament. That is why I've made a Filament Clip from Sunlu's but…
The original concept by Zack Freedman: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Divider%2520Bins The more simple/basic version:…
Do you want to enforce some rules at your school or workplace? Jasper is there for you. There are two versions: complete and split. the split version has zero tolerances, you might want to scale down the pants a bit or be ready to sand…
Well that sucks based on that random meme photo. I originally designed it with a roof, but I ran out of brown filament halfway through and abandoned it. The one without the roof can just be printed in solid color, but the roofed one needs…
Scare the bejesus out of your family or neighbours with this really cool Jesus ‘I saw that’ decor. You can make thicker if it is too thin
Apple Pencil Holder Also available for generic pens: CLICK_HERE Save your pencil's tip. Does not put pressure on your pencil's tip through a tapered canal so the pen does not rest on the tip but on the body. Printing: 4 walls 20% ZigZag…
I liked the idea behind this design , but it was too flimsy, even printed on PETG it kept breaking when dropped on the floor. This is designed for the Black Diamond “HotForge” carabiner from their quick-draws, but should fit any of the…
Latest files are available on MakerWorld. Get the full Plate Print Profiles: https://makerworld.com/en/models/242221 === Big enough to carry your pills, small enough to fit in your pocket. Top screws on easily. Measures ~ 30x12mm ===…
Kp3s is a lovely printer but it is alarming how bad the firmwares found on the internet are - even the one from official website.. So I have decided to upload this marlin config for kp3s v3.. Because every config found on the internet is…
After using a few sub-$100 usb c docks with my MacBook Pro (M1), I could not for the life of me get them to work correctly. I always had to plug / unplug multiple times, etc to get my external monitor to display anything. I don't wanna…
As before, I've included files for printing in one piece or with the wings separated, as well as a wingless version. I've also included the original .blend file for those wanting to make their own modifications. The finished product has a…
If you have a Worx Landroid that has traction problems specially with tall grass or slopes, adding weight to it, particular weight behind the rear axis, will improve its traction significantly. I'm not the first to come with this solution…
A selection of files to make a 3 way desktop box for the Make Noise Strega. You will need a piece of M8 (8mm) threaded bar to join the sections together and some 3mm bolts to hold the front plates on. To attach the handle I suggest using…
This was a fun little project of mine after getting inspiration from others on Etsy and Amazon. I wanted to get more experience in Fusion360 and 3D printing at the same time. This comes in several parts, all link to each other. The head…
Spooler axis remix for the original design from Miklos Kiszely
What it is: This is an RC airplane wheel with spiral spokes, capable of absorbing some of the landing impact. To satisfy a broad range of applications, I made four different rim types and five different tire shapes (all interchangeable);…
I needed a stand for my iPhone but every single one doesn't account for a case! And we ALL use cases, so I designed my own that will account for a somewhat bulky case (I use a wallet case). It's not super done up, it's simplistic and…
This headphone hanger it's designed for ikea lack shelf, but will fit probably any 50mm thing. There is a screw hole in the bottom for securing, but it's optional as it should be tight fit. Print instructions print as oriented in stl
Floating Benchy Stabilizer 🚤💦 Kennst du das Problem? Der klassische 3DBenchy kippt im Wasser schnell um oder liegt instabil an der Oberfläche. Mit dieser Stabilisationsflosse wird dein Benchy deutlich stabiler und kann auf dem Wasser…
A beautifully sculpted angelic warrior with delicate facial features and massive feathered wings, yet carrying subtle demonic charm. This fantasy figurine stands confidently with hands on hips, featuring clean armor-style surface lines…
This is the Rush. Except, i made it utilize Diana magazines. It'll fit Nightingale mags too, but that depends on how well you made the cutout for the hole to catch. Here's additional stuff i'm linking off Chance's remix of his Rush,…
Design Concept The hook is ingeniously designed to distribute weight evenly across its structure, minimizing hand strain and enhancing grip comfort while carrying multiple bags. Use Ideal for everyday shopping, the hook is a convenient…
This is a remix of emmett's iris box which a really nice design (in 2016). The only problem is that it does not work every time. For me, my first try worked after spending more than 30 minutes before the parts stuck together finally got…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) KNITTED CUSHION TEDDY – A…
A simple and striking black-and-white visual depicting a stylized figure inspired by Jesus. He appears on the left side, as if stepping out of the frame, with a mocking, playful look. On the right, in bold capital letters, the humorous…
A deeper version of Nordheim's iPhone stand that can fit iPhone with Clear Case and MagSage Wallet on. Works fine without case/wallet as well. Prints well laying on the side with 5% infill and 0.20mm layer height.
I hang hats, clothes, and equipment. I love these hooks. Resize in your slicer, as needed! Dimensions for the back of the hook are 55mm long and 17mm wide. I also have a model with a hole if you need extra strength!
This model requires no supports and can also be printed at 0% infill provided your slicer supports bridge infill (check sliced cross-section if unsure) For bonus emotional damage, add a filament swap after the first layer.
Obviously I don't own the LEGO ® brand, and the fact that this fits their bricks doesn't mean they support this model. Go buy their products if you want quality, this is just an homage to their brand, not a LEGO ® supported product. I…
Version 2.0 Update It became clear that overtightening the holder on the lateral adjustment screws can cause the bearing holder to crack. While this did not seem to affect print quality, it's not a good thing to have a cracked bearing…
This was a idea my dad had that I turned into a 3D model. It is a phone adapter that fits in a cup holder. This will fit in a 2014 Volkswagen Passat Cup Holder and will work best with the Samsung Galaxy S10 or similar sized phones with a…
The original model was too thin and flimsy when printed so I thickened the design. I removed the hole in the center.
I needed Jesus on the other side of the door. If anyone here needs it, here it is :) Original description: Works best with swapping colors for Jesus outline. I recommend printing several and just placing them around the office without…
I don't have much to say about this one. Introducing "The Unmissable Detail That Changes Everything" – a playful 3D printed model designed to challenge your perception and spark curiosity. Are you ready for a mind-bending experience that…
Small little boat that can be printed quickly and should float
I'm back at replacing my local hardware store. This time with copper pipe straps for 1/2" copper pipe. Blender file included. The first one ended up being a bit tight so I made a slightly bigger one in case you don't need it so tight.
Here's a sturdy birdhouse I printed with wood infused pla, the free roll of silver pla that came with my Prusa i3 MKS+, and White PETG. I mounted a Blink Camera in the back with outdoor rated Velcro. I plan on mounting the birdhouse…
Meant for Beyblade X from what Leftburst said
This one was tricky! I wanted to combine the upcoming holiday with the vase competition and add my twist! This spiral vase includes an integrated handle that can be easily detached to make the vase into something more. Pop the handle into…
Saw something similar on Etsy and decided to make my own. There is a left and right hand version depending on your door frame, choose the one that fits best :) The taller text versions have the wording 1mm higher to allow for a filament…
I wear my printed glasses now for 4 months and I like them very well. it weights only 28g and you do not feel them anymore . Print Settings Printer: Wanhao Duplicator 4S Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Notes: Print…
I am currently testing a new hive concept (for me) called the AŽ (ah-zha) hive which is a Slovenian beehive design invented by Anton Žnideršič and named the Alberti-Žnideršič (AŽ) hive. Žnideršič named his hive after himself and a German…
I wanted to use a hygrometer in my AMS and found this Remix but I don't wanted the vents on the back of the hygrometer to get better readings of the air and not the silica gel. So I improved it. I've also found some internal overhangs…
ИГРУШЕЧНЫЙ ПИСТОЛЕТ, СТРЕЛЯЮЩИЙ ЛЕТАЮЩИМИ ТУРПИННЕРАМИ. ИГРУШЕЧНЫЙ ПИСТОЛЕТ, КОТОРЫЙ СТРЕЛЯЕТ ЛЕТАЮЩИМИ ТУРПИННЕРАМИ. НЕ ТРЕБУЕТ ДОПОЛНИТЕЛЬНЫХ ДЕТАЛЕЙ. ПРОСТО ПРИНТЕР И МАТЕРИАЛ. НЕКОТОРЫЕ ДЕТАЛИ ПЕЧАТИ С ОПОРАМИ.
That Darn Machine is a portable loom hardware platform that allows you to mend your clothes and do some recreational weaving. I've built it to be simple to use and portable so that you can weave on the go just like you would read a book.…
A unique dark-fantasy collectible featuring a winged demon with the elegance and purity of an angel. Designed with smooth geometric detailing, graceful posture, and breathtaking wings, this figurine blends beauty and mystery in one…
owo, what's this? A joke became realty, and the SUBUWU is out on the road to the disgust and delight of many. Scaled 1:1 for a 2014-2018 Subaru Forester I dreaded the idea of aligning the letters, so when I developed the model in Fusion…
This is a remix of the 2/6 wine glass holder I found on Thingverse. http://www.thingiverse.com/thing:1910037 I only needed capability to hold 4 glasses, and the snap-together version I found a little too hard to give to older people :)…
This is a Disc mount with a blank backplate to be remixed onto any type of mounting bracket you would like. I modeled it from scratch in Fusion 360. This was my first project in Fusion. The bottom connection of the backplate to the ring…
I tweaked the Fusion 360 file from Adafruit and the Ruiz Brothers so that the entire project will fit on a Prusa i3 MK3 WITHOUT having to glue anything that wasn't glued in the original . This required shortening the handle, rotating the…
I was looking around for something suitable to add thrust bearings to my Ender 3v2 and there was nothing that really suited what I wanted to do. Most of the ones that I've seen attempt to support the outside of the bearing and keep it…
I got tired and frustrated after printing other dispenser designs and having them jam after only a few batteries were dispensed. So I came up with this jam-free design and it really works well and will hold 39 batteries. If you lay the…
Update - I added .030" to the o-ring groove diameter so it works better with a -111 o-ring. This will no longer work with Gardena's apparently proprietary o-ring. This is a precisely copied male plug for Gardena's quick disconnect system.…
Needed a simple remix to be able to use my Xiaomi Hygrometer. Not limited by any knowledge about how to edit an STL, I came up with this remix design. Be aware, it works and is functional but it will not win any design contest. Posting a…
Changed hight of letters to make it same color as jesus. Good for white walls
it can hold 7 rounds and shoot up to 3 meters!
M12 Milwaukee battery TAB FIX (the version that has a single screw on the bottom. A M3 16mm screw is used to replace the original 18mm Torx tamper proof screw. The original screw is removed with either the appropriate security driver bit…
https://www.buymeacoffee.com/maxt ---------------------- Print with 3-5 walls, 30% infill, fuzzy skin for better grip (0.8 point distance, 0.3 thickness) This Fridge Handle represents a robust and ultra-durable refrigerator handle ,…
Hi! I liked this extruder model, but the mesh on the extruder arm seemed to be incorrectly triangulated. So I dropped it into Tinkercad and fixed it. While I was in there, I bumped out the part that the tensioning spring rests against, so…
This is a revision of an old design I made; this one is a little smaller and prints as one piece. Has 10 standard USB sockets. Print instructions Support is needed everywhere. Use tweezers to take out the little bits of support found in…
Rimuru Tempest in his iconic slime form from Tensei Shitara Slime Datta Ken (That Time I Got Reincarnated as a Slime). This version is the basic slime body – simple, smooth, and fun to print. It’s offered as a free file so everyone can…
![[V2.0] Adjustable Y-Axis Bearing Holder for MK3 - Fix That Rattle!](https://media.printables.com/media/prints/77815/images/839402_b9ec1308-b6a5-4faa-83cb-8c211e56d19e/20211002_152949.jpg)
