Remix - MMU PTFE tubing clip with numbers
Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: Optional
- Pobrania
- 58
- Polubienia
- 8
- Ocena
- 5
Liczymy pasujące modele…
Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: Optional
4-piece cat hammock designed to replace broken parts. PETG printed for durability
Adapt .25 OD plastic pneumatic/icemaker tubing to PC4-01 BSPT Thread. Works with Sunlu FilaDryer Filament Dryer S2 PTFE Adapter by MichaelQ Update: Works best using PTFE bowden tube as a liner inside the length of your nylon tube.
simply clips on, no modifications or tools required perfect fit PTFE tubing is a friction fit, no extra parts required contains variants for 6mm and 4mm OD tubing can be attached and removed without unloading filament .step files included…
As the filament is loading and unloading this cause the PTFE tubing to move and add a ever so slight pull upwards on the ring inside the fitting, this causes it to get stuck on to the tubing, making the standard method of removing the…
A tool to easily insert cables into split wire loom tubing. I created this tool for a friend in sizes 8.5mm, 10mm and 13mm. If you need another size you can just take the 10mm version and scale it. Please leave a like if you enjoy my…
A connector to add inline for your filament supply system. Good way to quickly and easily disconnect the tubing to clear a blockage or to switch between filaments in a dry box. Just twist to connect and disconnect. Simple to print with no…
Simple funnel that presses onto the end of a 4mm PTFE tube so it's much, much easier to load 1.75mm filament into the tube. I've been using this for years anywhere that the printer has a PTFE tube as the inlet for filament and it makes…
Thank you Marko Borsic for the original design. It fits great, and prints well. I've noticed that the stiff 6mm PTFE tube coming from my Polydryer filament box tugs on the adapter, and pulls up the side that the tube goes into. I've added…
Pipe fittings Elbow Ø16mm / Ø20mm / Ø25mm Hexagonal Shape - Gomiti di raccordo tubi forma esagonale Piping and Fittings for Installations for PVC Electrical Conduit 90 degree Ø16/20/25mm 120 degree Ø16/20/25mm 135 degree Ø16/20/25mm 150…
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
Double U-type Pipe Clamp - Morsetto per tubi a doppia U - Metric/Imperial For fast installation of RNC, flexible & rigid conduit Easy to print, optimized filament usage Sizes available: Metric Ø 7mm Ø 16mm Ø 20mm Ø 25mm Ø 32mm Ø 8/20mm…
ball socket joints to chain ↦ joint hose (don't use PLA as it will creep and get loose over time)
I have seen this kind of tubing on many other raisers, and also one remix from JesusFreak's, but not in a proper manner to suit the dedication JesusFreak put in giving us this great Files. So I made one. One file is just optics, since…
Pipe Notching Tool_Steel Pipe Coping Guides Coping jigs T 90 degrees - 30/60 degrees - 45 degrees Maschera di tracciatura Taglio tubi innesto a T 90 gradi - 30/60 gradi - 45 gradi Pipe dimensions in mm/inches: Ø20, Ø25, Ø30, Ø35, Ø40,…
Thank you Marko Borsic for the original design and Boris Cvjetkovic for the remix with the clip. It worked great for me but sometimes the 6mm Bowden tube could pull out with little pressure when slightly moving my polymaker filament box.…
Barbed tube fittings for splitting and connecting multiple different sized soft tubing together. Has Barbs to give a secure fit on the hose. Designed to need minimal support. Print standing up with larger end on the bed. Brim might be…
I redesigned my 40° coupler from the ground up! The Fusion360 design is now more parametric, so if you want to mess with the angle, get the source here! https://a360.co/2BwCLdH It's also shorter, and has a smaller footprint in general. It…
This flexible clip made of TPU is suitable for cables and tubes in the size of 2 - 4 mm! Also for the PTFE tube on the 3D printer! Different sizes with 2 - 6 holes. Print settings: Material: TPU Filling: 15 Support: No Layer height: 0,2mm
While the original Ball vise is fine for those with a selection of hardware on hand, that's not me. So instead of buying a bunch of bolts and such, I modified the files so everything can be printed, except, of course, the silicon tubing.…
hi here is my sim rig i made including the fusion file for the drawings
I installed some 3/4" PEX-a tubing for a new basement bathroom and wet bar. I wanted an easy way to identify the hot and cold water lines while using white Pex and keep the tubes nice and parallel. Yeah, I could have just written "Hot"…
these are used to keep the PTFE tubing flat and close together to minimize the are behind the printer, the 25 mm are used closet to the hub or expansion adapter. helps to maintain a gradual sweep of the tubing to remove any binding or…
I needed a few changes to the original: tapered pipe protrusion and a way to offset an "endstop" from the corner. I'm pretty new to OpenSCAD so there's probably room for improvement, but it was a fun learning process. The protrusion is…
This is a remix of 3/4" to 1/2" so I can mount my 1/2" to the wall with a screw. Print Settings Supports: No Resolution: 0.20 Infill: 15% adaptive cubic Filament: PLA, PETG, etc.
You have upgraded your Prusa i3 MK3s+ with the MMU2s upgrade and selected drying solution with varying degrees of PTFE tubing guides for filament. Now you need a hardware free efficient way to organize the 5 channels of filament in your…
Heat Shrink Tubing Cutter For cutting 10 / 15 / 20 / 25 mm long pieces. The blade used is a carpet knife. Grind the blade at the sharp tips around so as not to injure yourself. You will find 2 versions for different thickness of the…
Settings: 100% infill. 0.16 layer height. Material: Recommend ASA or ABS, smoothed with acetone vapour for best sealing capability. Next best option is PETG. Then PLA. Usage: You may want to use a heat gun to soften the tubing before…
If you want to bend acrylic tubing, i recomment to print it in ASA/ABS for better heat resistance. For acrylics, i had the best results with the 35mm bend radius and round walls, but 30mm works, if you heat the acrylic well. If you feel…
If you are running an auto top off, and also doing a single dose pump for your tank (for something like “All for Reef”) then this is your print. I have a Fluval EVO 13.5 that needed a way to hold both of those tubes securely while using…
Print with supports
I originally designed these to use for building a small snow cab for my small garden tractor but decided to go another route with that! These are various fittings for EMT Conduit (¾"). Use your imagination to make all sorts of things such…
I designed a clip which is pretty tight fit to 16mm poles on a Growtent. The clip itself is slightly bendable so depending on what material you print it you can easily fit in 10mm cables/tubes in it.
Use this valve to control or shut off the flow in flexible tubing, like air tubes used with aquariums. Included STLs are sized for some “standard” aquarium air tubing that I had laying around. Customize in OpenScad to resize as you see…
I want to thank you for choosing to embark on this journey! I started this project as an experiment to see how far you can take a mainly 3D printed CNC router with inexpensive components, the result is hopefully what you will soon enjoy!…
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV
Print Settings: Printer Brand, Prusa Printer, I3 mk3s Resolution, 0.2mm Infill, 15% Perimeters, 3 Supports, No Filament, Petg Notes: Snap it over the pipe and use two #8 construction screws to secure it to the framing. Works best if…
I made this part for a worcolleague which goot a pcb holder 3d printed - he was misssing a spring material to put on one side- I create this part sadly I cannot recall which model he used. it was printed in tpu on a micro 3d printer- I…
Pipe fittings Clamp/Clip Ø20mm Hexagonal - Clips per fissaggio tubi Ø20mm esagonale Standard Elbow 30 degree Elbow 45 degree Elbow 60 degree Elbow 90 degree 90 degree T-Piece (added) Resize to adjust dimension All our designs are free to…
Tubing Drybox Passthrough Simple filament passthrough for dryboxes, designed in Fusion 360 and printed in PETG. Provides secure, moisture-protected filament feeding. Optimized for smooth filament handling. (ideal distance is 2cm)
Holder for aquarium tubes 4/6mm. Glass thickness 6mm.
An angled exhaust port for your Anycubic M7 & M7 Pro. To fit a 50mm duct or tube.
I have a ¼ in tubing running from the reverse osmosis filter under the sink to the refrigerator to feed water to icemaker. It is hot glued to exposed particle board a few inches off the floor, right under the base cabinets bottoms and the…
Print settings: 0.20mm QUALITY Filament: PETG 20% infill
I did my first custom water cooled PC recently and I had the idea to print dummy tubing to test out how I would do the runs. The dummy tubing pieces are of known length which really helps when setting up your bends for the real tubing.…
Fully functional replacement for metal fittings, tested up to ca. 1 bar. Comes in four versions, barbed, straight-long, straight-short, and 90° angular. Use with 6x1.5mm or 5x1mm O-rings. Can be tightened with a 7mm wrench, but don't pull…
This is an original design from the author. This is not my design. I use these connectors often. Very comfortably. On the thingiverse website. It’s hard to find everything, I uploaded these files to this site so as not to lose them. This…
End cap for hollow square tubing (25.5mm X 25.5mm)
Corner Connector x3 for PCV Tubing Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV
This cutter is easy to print, easy to assemble, and easy to use. It cuts 3 sizes of tubing: 3/8” (9.525mm) used in RO water systems ¼” (6.35mm) used in RO water systems PTFE (4mm) Parts Needed 1 single edged razor blade 1 M3x20 screw 1 M3…
Silicone Tubing clips for Sculpfun S9 Clips are designed for silicone tubing 4mm inner diameter and 6mm outer diameter ( https://amz.run/5CFO ) Print Settings Printer: Qidi X-Max Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill:…
Cut 8 pcs 12" long for feet Cut 2 pcs 36" long for posts. Cut 56" pieces for the jump bar. I used hot glue during assembly as well.
I designed this guy to polish the water in my cold plunge. The threads on the end fit a standard garden hose. I stuffed mine with filter floss, and there are included mesh filters as well. If you like the design and have a more particular…
This is a wallmount made for holding brewtools and gardena tubing. The top five slots holds Brewtools 16x25mm silicone tubing: The bottom three slots holds normal gardena tubing with 16.5-17mm OD Screws to the wall with two 4x20mm pan…
This is an endcap that fits in 1.5" square tube.
Heat shrink tubing cutter jig for the work bench. It takes a standard box cutter blade, secured with 2x 4-40 screws. The swing arm is secured with a ¼-20 BHCS. Threads are not modeled in, they are to be tapped. Markings on outfeed are ¼"…
Also introduced a new variant - with or without tabs to hold the cable/tube in place. The countersunk screw hole is designed to fit standard #8/#9 drywall/construction screws. Original 2-cable version is here: Wall Cable Holder for 2 x…
I'm working on a project where I need to install fasteners through some aluminium tubing and it so happens this contest has coincided with the project. All demonstration photos are with ¾ inch aluminium tube, 11/64 drill and M4 bolt,…
Corner x4 Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV
Patients with COVID-19 in serious or critical condition often require assisted breathing via ventilator. As the number of patients in need of ventilators grows (exponentially in many densely populated regions), there are not adequate…
Creator 5 Pro Extruder Vent Filter with PTFE tubing slip fit connection. The extruder vent actually emits a lot of VOCs and particulates. This happens because the chamber recirculation filter fan and the chamber intake fan blow at the…
This is a simple sprinkler head that fits into 1/4" drip irrigation tubing. It is distance adjustable using a 4-40 (or similar size) screw threaded through one of the holes in the top of the deflector piece. Printed in ABS, as this will…
Corner x6 Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV tube (either scaled print or finishing is required).
After using the original now for a while I ran into an issue. Despite the PTFE tubing being very tight in the coupler parts the rattling of my printer managed to slightly pull the tube ends apart. Just enough that feeding in a filament…
Abrasive pipe reamer for use with round tubes, especially carbon fiber. Works for diameters of tubing found on bicycles (appx 15-40mm) to create a 45 degree chamfer. Print the three pieces, use the templates to mark your sandpaper, (I…
I created these PTFE Tubing Straighteners to help straighten out PTFE tubing (4 mm outside diameter) that has been coiled up since manufacture and wants to continue to be coiled up tightly when you need it to be straight (or at least…
Tubing cutter, specifically designed to cut small plastic tubes or straws. The sharp blade allows for clean and precise cuts, which is essential for ensuring proper fit and functionality in applications such as microfluidic tubing,…
If you have a pipe or tube with a 20mm OD and a16mm ID, this will work for you! I'd recommend printing in PETG but I've used PLA in similar situations and had no problems, but it's a hammer fit because of those silly little ribs that have…
So in making my Lack Enclosure, I cut my PTFE tubes too short. I had to get a few couplers and I tied them back to back and placed them in the middle so it would extend and get my tubes down to my lower cabinet. The filament catches a…
This is a remix of 1/2" mount with a second mounting hole. Print Settings Supports: No Resolution: 0.20 Infill: 15% adaptive cubic Filament: PLA, PETG, etc.
I needed an efficient and precise way of blowing the sawdust from the cut-outs in my scroll saw, as the PVC tube supplied as standard didn't work at all. I've seen this type of articulated blower on another machine, but it's a very…
These chair feet are designed to fit chairs legs that are made with 16 mm inside diameter square tubing. I've included three styles of feet. The foot with the rounded end will fit a leg at any angle. Each of the feet has a round recess…
Uses #6 x ¾ screws to hold onto wood surface. There is also a recession on the back side to use hot glue to attach to a concrete wall.
Will have to use supports, use ASA or PETG material.
Model generates a template that you can 3D print to lay out cuts for bending a rectangular tube. Rectangular tube will have a nice outside radius and is guaranteed to fit together tightly for easy welding. Fusion 360 model is fully…
Installing RO systems and needed some clips to have a bag of to hold down wires and ¼ tubing. Nothing I found had the fastner hidden and an easy way to remove the clipped wire/tube without removing the screw. After a few changes the…
Corner x5 Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV tube (either scaled print or finishing is required).
A simple passthrough for a PTFE tube into a printer enclosure, using PC4-M10 pneumatic fittings to keep the tubing from being yanked into or out of the enclosure.
I didn't want to spend $40+ on a bending mandrel to use for 4 tubes one time, so I drew this up quickly. There are bends for 90 and 45 degrees, as I figured 180 wasn't that commong anyway. It's set for 14mm OD tubing. Smaller should work…
This is a simple end cap for square metal tubing of 40mm by 40mm with a thickness of 3mm. The shape follows the 8mm radius of the corners. Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1 Rafts: No Supports: No…
I was having problems with my Bambu X1 Carbon loading filament from the AMS into the printer. The filament was getting snagged upon entering the filament buffer on the back of the machine and I was getting filament loading errors. This…
So i remixed this to fit 50 x 25 mm aluminum tubing. I dont have Fusion so used PrusaSlicer to cut and resize the part. The fit is perfect for my used case so it might help someone else :)
Parametrisable tubbing for horse jumps. You can change lenght, diameter, cutting height. Designed with cutting for better pritability. Brim recommended. For example for https://www.thingiverse.com/thing:252205…
Create small hole to the main tubbing with nail and than push this connector to it. Compatible with rain bird irigattion tubbing. Print flat with 100% infill and support
Can be used for sawing 16mm OD acrylic tubing
Zum ausquetschen der Tuben für z.B. Zahnpaste oder Creme.
This cutter is easy to print, easy to assemble, and easy to use. It cuts 3 sizes of tubing: 3/8” (9.525mm) used in RO water systems ¼” (6.35mm) used in RO water systems PTFE (4mm) Parts Needed 1 single edged razor blade 1 M3x20 screw 1 M3…
mpcnc-primo-f-tubing-plug.stl - plugs into the ends of side rails (needs 8) mpcnc-primo-f-tubing-plug-hole.stl - allows to lay cables through if you put your cable through gantry rails (needs 4) Keep your fingers safe (or do not buy the…
Endcap for 1" square tube Friction fit
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
Dual Hose Clamp for 16mm (5/8 inch) tubing. Used for watercooling loops. You will also need an M4 x 12mm or 16mm as well as a M4 x 4mm or 6mm threaded insert.
More of my fluid management designs I've made a number of these little tees for various test builds when I didn't have and/or forgot to order real tees (or I guess Ys in this case, but I tend to call all two-way splitters 'tees' I guess…
Support pour nettoyage ou le séchage d'un tube CPAP. Besoin deux 2 ou 3 vis 4MM x 30MM
I didn't like the cone shaped feeders on the market so I designed and printed my own. Print settings: 0.4 or 0.6 nozzle PLA or whatever you like to print with whatever layer height you like 2 perimeters no supports Add a height range…
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV
I have little space on my desk but want to give my ants some travel distance between nest and arena like they would have in the wild. Solution: winding up a length of tubing into a spiral. In addition, I had trouble connecting parts with…
Here is a bucket clip for attaching tubing to a five gallon bucket. It clips on to the side side of the bucket and the tubing pushes tightly through the hole. I use it when siphoning water out of my aquarium when doing water changes so…
If you need to scale it to a different size just use a measure tool of any diameter and select edit to change it to what you need. Cut 8 pcs 25cm long for feet Cut 2 pcs 100cm long for posts. Cut 1 80cm piece for the jump bar. I used hot…