Liczymy pasujące modele…
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Intro This is a simple case/holder/cover for Yubikey 5 series USB A and USB C. Note that the versions do differ: so print USBC for USBC key and not USBA for USBC key! Info It can be printed without supports. I printed it with 0.12 layer…
This case has slight changes to it and is based off of Digital Juice 's. This update fits the LD2410 with or without dupont wiring and the USB C version of the D1 mini ESP8266. I included a text file of the .yaml file that is working for…
I wanted to build a power bank that could support the USB PD protocol so I could charge all my devices off a single battery. I ended up with this 288 W/h power bank using 16 5000mah 21700 cells in a 4s4p configuration and leveraged a 100w…
A spacer to fill in the gap left after installing the GBA SP USBC mod. Feel free to use these files on a personal or commercial basis. robot_retro store
Intro These are two simple CAD 3D models of Yubico YubiKey 5 Series security keys ( https://www.yubico.com/products/yubikey-5-overview/ ). USB A .step file and USB C .step file versions are included. Measurements were done with caliper.…
This 144Wh 100w USB-PD power bank is the the little brother to my 288Wh version . My main motivation was to have a large power bank that I could travel on airlines with. The TSA regulation is 160Wh max . I ended up with this 144Wh power…
I ordered some ESP32's and printed the Chonky case without measuring. It seems the boards I received with USBC were about a milimimeter longer than the boards from the original chonky case. 51.75mm long boards Of note it seems the status…
Remixed flash drive and SD holder for Skadis with additional USBC and micro SD slots. I've included a smaller form option (picture) if you don't need as much storage. I've also made the dovetail connection to use the M3 T-nut system. But…
cable protection usbC samsung to print vertically
i suggest printing this in tpu with a 0.2mm nozzle, use variable layer height at quality preset for the best results, your minimum layer height can be 0.06mm or less.
Features Perfect Fit: Precisely dimensioned cradle ensures a snug, wobble‑free fit for the Waveshare ESP32-S3 1.8inch AMOLED Touch Display module. Integrated USB‑C Port: Built‑in cut-out accepts a NOTOW Elbow USB-A to USB-C 90° braided…
3D printed spacer to be used with the Robot_Retro Dreamcast power supply. robot_retro store Designed by Joseph Tomkins
I printed this in black PLA at standard (.02) quality with no support. The original is on the left, the remix is on the right.
This is a case for generic PD trigger modules I found on Aliexpress. The rough length is 11mm. No support is needed but I had to clean up the oval opening a bit to make it fit.
3Dprint-Case with USBC-PD for the Nintendo 64. 1x PDC004-PD 12V 1x LM2596S https://de.aliexpress.com/item/10000000656280.html 1x Connector from original PSU 4x M3x4x5 Inserts 4x M3x8 Socket Screws
This is a mount for the Foxeer m10Q 180 for the FlyFishRC Volador VX5, that includes provision for an SMA mount and a USBC connector that can be wired for Walksnail Avatar
apple macbook cable protection usbc
I made this for my trayvax wallet. I've included a NO-coin Option if anyone wants to remix it to hold somethig else. Other than coin holder. so upon actually fitting it in, the card takes up way too much valuable card space..so I made…
A remix of the Robot Retro USB C spacer that has two nubs that fit into the groove on an OEM or after market shell. This ensures that the spacer doesn't fall out with after market shells, like Extremerate sells. Print with automatic…
I was inspired by LWCs splitter adapter approach, but had I few ideas of how to make a version that is easier and faster to print in different materials and is (marginally) lighter. Also I prefer long clamps on the thin part of the…
I like to have all storage in one place. so create this simple slot .
I needed a place to store that ugly docking station. So I made one for the Thinkpad USBc dock. You can mount it under your desk, with double sided tape, Gorilla-tape will work fine. There are two options, one with a full cover, and one…
USB-C Trigger board case Things Used: (non affiliate!) USBC Trigger CTP9 Category: Electronics
A 100w USB-C Battery Back made for 18650s, with a Switch and 2 additional USB-A ports. The pack is made for an 4s4p battery configuration. I have gotten a USB-C 100w Soldering iron and it holds up Ok, albeit struggling at higher loads…
Stand for charging devices via usb c for HSW.
I was building ergonomic keyboard called redox and I didn't have TRRS jack or teensy so I edited the case a little bit to house pro micro and usb c pinout board -…
3D printed spacer to be used with the Robot_Retro Gamecube power supply. robot_retro store
3D printed spacer to be used with the Robot_Retro Sega Saturn power supply. v2 version with a slightly shorter model to make it compatible with shorter USBC cables robot_retro store Designed by Joseph Tomkins
I liked the original USB holder but i wanted more storage and a Gridfinity base. The magnet hole size for the base is 6x2. The storage design is from https://www.thingiverse.com/thing:5291498 but i am not sure of the source of the…
I've been through a fair few iterations of this, and this one is the first I am happy with. I have USB C plugs in my kitchen already, so this makes this sharpener super convenient to use and brings a knife back to life extremely quickly.…
3D printed spacer to be used with the Robot_Retro PS1 power supply. robot_retro store Designed by Joseph Tomkins
Holds most oval shape USBC to mini/micro adapters. print at 100% infill with TPU
USBC specification Bowling Pin, full size.
This is a simple USBC port plug to keep out dust, dirt, and water. The plug is designed to sit flush with a case and have enough space to get your fingernails in place to remove the plug for charging or data transfer. For more projects…
Got these Sparkfun knockoff usbc breakout boards, and wanted to put them in various projects. Made this crude 3d model to help develop enclosures for the part. part: https://amzn.to/3XQvXwo
USB-C docking cable support. Height adjustable by 1mm - either add the flat slider or - to add another 1mm to height - remove the flat slider and add an additional middle one.
A simple USB Holder for 5x USB-A and 5x USB-C devices. Does not require supports! If you like this model and print one please post a rating and a picture of your print as I love to see what colors you might choose to print it in. Thanks…
i suggest printing this in tpu with a 0.2mm nozzle, use variable layer height at quality preset for the best results.
Heres another USBC Decoy board I designed a case for, check the pictures to confirm its the same one, I have seen similar looking ones but have a slightly different layout, these may not fit the case. They are very cheap from Aliexpress…
keep your usbc power board safe with this 3d printed case
USB and USBc Front IO panel for Mac Pro 1.1 "cheese grater" mod Front IO panel replacement for Mac Pro case conversion. It fits two USB-a ports and one USB-c port. [no audio jack because I couldn't find an HD audio cable with a single…
An Arduino UNO case that contains a Small Solderless Breadboard and a USB-B to USB-C adapter. It's great for students that need to have a breadboard and an UNO with them for various classes. the Type C adapter frees up some space in your…
I have usbc charging grips on my joycons for use when traveling to play games on my laptop. I made this case in order to protect the buttons/analog sticks from getting damage and randomly pressed while in transit. There are 2 sizes, short…
3D model of Lenovo/Thinkpad USBC Docking Station Overall Dimensions, LxWxH, 210mm x 80mm x 30mm Models: DUD9011D1/ 40AF0135US
For each half you will additionally need 10pcs m2 6mm screws and 5pcs m2 8mm spacers. The spacers can be quite tight, so you can try heating them up a bit, or using a screwdriver to screw them in. If the printer is set up well, they will…
This is a mount specifically for the NC701 USBC Dock. (cheap dock with PD passthrough) 3mm walls, (effective 100% solid) 0.3mm layers or smaller. (no supports needed) Link to Dock:…
Just a basic usbc cleaner. I couldn't find another model on here that worked well for me, so made this real quick.
You can find the DIN clip used, form here
Very simple clip-in design to hold adapter in place offset from a flat surface.
I keep my tower under my desk where the top corner is the closest to me and i wanted to add usb-c to the front io. Combined with this , I utilize an existing hole in the metal of the tower directly behind the original cooler master logo.…
For each half you will additionally need 18pcs m2 6mm screws and 5pcs m2 8mm spacers. This is the version with the encoder on top. If you have the version with a nice!view, nothing there, or the encoder on the bottom, please edit the STEP…
I have a Comsol DCC120 USB C & A power supply when I travel on business. It runs my laptop and charges phones etc - a very handy bit of kit. It was supplied with a stand that I promptly lost. Here's a replacement stand that will allow the…
Front mount for HGLRC M100 GPS (21x21), designed to sit in the GoPro position. Added a USB-C extension holder — I’m using an O4 Lite mounted on the stack, so this lets me access the port from the front without taking off the bottom plate…
A simple remix that adds USBC/PD module support.
Summary Convert a Fossil style Android Wear charging mat from being a charger with a built in usb-a cable, to a compact modular usbc device. What you need (affiliate links, thanks for your support) Android Wear Fossil Charger - used this…
3d print file for USB and USBC drive holder.
change the top larger assembly to make room for my toggle switch and female USBC header added for power input
Himalayan 450 factory handlebar USBC plug mounted sideways for safer cable routing. Requires M3x20 and M3 threaded insert. Preferably printed in TPU4AMS or sturdy TPU (added walls) to prevent sag in hot weather. Nylon etc if you're keen…
This is a case for an USBC PD 100W Buck Boost Charger. It gets hot and need to be cooled so a fan is included. The fan is connected to +5V "A+C OUT" and GND to a Ground pad of the USB-A connector (see pictures)…
I loose all my USB caps, so I made my own. Also a good print to empty the last meters on a filament roll. Category: Computer
Use 4x ruthex m2.5 threaded inserts. This then attaches on top of 2x https://www.printables.com/model/876805-din-rail-clip
I have a computer that only has USB-C ports on it. I still have a lot of the older USB hubs and gear so I constantly need a USB Type C to USB 3.0 Mini Adapter. When I need it I always have to hunt around on my desk for it. So I created a…
Case for the Rexus Nexus ReN64 PSU for the Nintendo 64. Sits flush with the rear and allows for the USBC PD cable to exit parallel with the rear of the N64. Only need one of each printed part. The PSU clip goes in after inserting the PSU…
I have a Comsol DCC120 USB C & A power supply when I travel on business. It runs my laptop and charges phones etc - a very handy bit of kit. It was supplied with a stand that I promptly lost. Here's a replacement end-cap style stand that…
This cover is used with the Moment 180 degree USBC adapter. It snaps over the adapters to make them feel nicer in use. https://www.shopmoment.com/products/moment-usb-c-dual-angled-adapter Print in the orientation in the file, no supports…
Used these models to reuse my old ender3 power supply. Used a pcb from aliexpress https://www.aliexpress.com/item/1005006578600241.html and some stick on silicone feet. The back cover is a model from…
a cassette for a gamesir g8 that holds a female to female adapter. this allows you to use it as a controller for your pc I used this one
I used the USBC Hub board https://www.ebay.de/itm/406011746482 FreeCAD model available here: https://codeberg.org/uwearzt/freecad/src/branch/main/lab/gridfinity/usbchub_gridfinity.FCStd
Dual 10G SFP USBC adapter under desk mount Thunderbolt 5/4/3 Compatible Intel 82599ES version.
My E3NG uses a BL-Touch that takes up most of the rear of the toolhead. I needed a rigid mount for my aliexpress ADXL345 accelerometer; the stock accel mount in the E3NG v1.2 public release collided with the BL-Touch, and the giant mess…
A strap clip mount for the JSAUX USB C to 3.5mm Audio + USBC Input adapter to attach to the Steam Frame strap. Works with both the stock configuration and the Ergonomic Kit. USBC Input hole intentionally mirrored on each side so that you…
A remix inspired by the keychron Dongle hider by ThatHummingBoy69. It works with the Keychron Dongle that came with my Keychron V3 Max.
A small bracket that holds the TC4056 in place so it cannot be pushed back or moved around. Screws dont line up but it fits in place tightly. I printed it in PETG and PC filament.
Simple solder filter. requires some assembly but not too bad. All you need is an on off switch, an usbc adaptor, a computer fan, and some solder filters. You can use any usbc cable as long it is 5 amps or less. these are amazon links for…
3D printed spacer to be used with the Robot_Retro Sega Saturn power supply. v2 version with a slightly shorter model to make it compatible with shorter USBC cables robot_retro store Designed by Joseph Tomkins
Used these models to reuse my old ender3 power supply. Used a pcb from aliexpress https://www.aliexpress.com/item/1005006578600241.html and some stick on silicone feet. The back cover is a model from…
Heres another USBC Decoy board I designed a case for, check the pictures to confirm its the same one, I have seen similar looking ones but have a slightly different layout, these may not fit the case. They are very cheap from Aliexpress…
3D printed spacer to be used with the Robot_Retro Gamecube power supply. robot_retro store
Dual 10G SFP USBC adapter under desk mount Thunderbolt 5/4/3 Compatible Intel 82599ES version.
This case has slight changes to it and is based off of Digital Juice 's. This update fits the LD2410 with or without dupont wiring and the USB C version of the D1 mini ESP8266. I included a text file of the .yaml file that is working for…
For each half you will additionally need 18pcs m2 6mm screws and 5pcs m2 8mm spacers. This is the version with the encoder on top. If you have the version with a nice!view, nothing there, or the encoder on the bottom, please edit the STEP…
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
