Volvo V70 2000-2008 scale model
Volvo V70 model modified for 3d printing. Original model by Dennis Andersson on sketchfab. Modifications : Removed interior added cylinders for the wheels
- Pobrania
- 618
- Polubienia
- 41
- Ocena
- 0
83 modeli
Volvo V70 model modified for 3d printing. Original model by Dennis Andersson on sketchfab. Modifications : Removed interior added cylinders for the wheels
English: This is the belt guide for a Volvo V70. You can mirror the model, then the guide also fits on the other side. German: Das ist die Gurtführung für einen Volvo V70. Man kann das Modell Spiegeln, dann passt die Führung auch auf die…
On my Volvo V70 III (Diesel) from 2009 the retention plastic cable of the fuel tank cap broke. While searching for a replacement I stumbled across the model from Adam2k . I went straigth ahead and printed it … sadly the V70 has a…
Replacement door lock knob bezel for the Volvo S60 and V70 P2. Changelog: 2022-07-31 added oversize version (mine jumped out again) 2022-10-25 added a simple version with 4 hooks 2026-07-12 new smooth HD version with 360° hook
Replacement window clip for P2 platform volvos (2000-2007). I recommend printing this in PETG because PLA is too brittle.
English: The clip for the tailgate trim which breaks when you disassemble it. German: Der Clip für die Heckklappenverkleidung welcher bricht wenn man diese demontiert.
This center cap was designed to fit a 1998 Volvo v70, but it may also work for other models close in age, such as the 850, S60 and S80 models. The tabs have a tendency to break off because of the layer lines, but I've had pretty good luck…
This is a case for all V40 / V70 Volvo keys from years 1997-2001 (i think?!). Be sure that your key looks like the key on the pictures (remove the plastic!). It is necessary to make sure that the transponder chip is in it! If it is not on…
These clips just like the originals, where you press the pin flush to lock, and press further in ( 4mm ) to unlock. There are “supports” you can import with the clip body if required. To import them first import the clip body, then right…
Made a remix that would fit a general mount with screwholes so you could mount various other things like Brodit accessories or alike in the CD slot that's not used anyways. It sits flush with the stereo unit so do not use too long screws…
Summary This project provides printable negative holders for Epson range of flatbed scanners with transparency support, namely: v700, v750, v800 and v850. The main objectives of this project are: to allow for easy and precise negative…
Tested over 200km with a PLA prototype, working flawlessly with improved intake sound. Cone Air Filter Size used: Flange Inside Diameter (102 mm) Base Outside Diameter (155mm) Top Outside Diameter (117 mm) Height (155mm) After 350 km, the…
This is a rather nice looking (and feeling) keychain, I modeled it after the Volvo v70 and created it to be dual color. What will you need to print this? - 2 colors of filament of choice (obviously it's also possible to print this in one…
Make sure it's thicc enough, 5mm 3 walls and 10-15% Bot/Top 3-4
the plan was to drill some holes and fix the unit in place, but it's really snugly, so I think it's not even necessary
Adapter for Volvo V70n reverse light to fit a h7 lightbulb. I used at Philips H7 - Led that could be rotated.
YOU NEED TO SACRIFICE A WORKING VOLVO KEY TO FINISH THIS PROJECT The plastic heads on Volvo keys from the 1990's always get sticky and dirty. So I decided to print a new one aaaand it's better than original :) You have to cut open your…
Cover plug for removed headlight wipers on Volvo S70, V70 1st gen. Contains a cavity to be able to fit even when the axle/motor assembly has not been removed entirely but only cut flush with the front using a Dremel or such. Disconnect…
It's a drop-in replacement for the electronic window button; mine broke due to the plastic aging. I recommend PETG for this. No supports required. Modeled based on the original design and worked just fine.
You need to reset size of the circle to 70 mm. I did a filament change after base printed.
This allows to keep your batteries (NP-FV70) organized (last one used, next fully charged)
Replacement of cover for badluckers who lost original cover and just have original cover holder. There is hole for screw and nut so aou can tighten the cover to not loose it again. Mine is on my car for several years without any problem.…
A printable model of a Volvo v70 from 2008 - 2016
Completly redo from scratch based on the idea of this the remixed item down here. The gauge si a litle bit outer of the vent to fit longer pod. Parts fit more well in the OEM vent. Added more round edge so the printer have less artifact.
Replacemente for Volvo XC70/V70 2008- Cargo Cover Stop. Print in PETG with 100% infill at 0.2 or lower Scale to 99% for smooth insert
Do you have a old Volvo S/V40 S60 or V70 key where the key grip has become sticky & not so nice!? Here is a Key cover that i created to get rid of the tacky and discussing rubber like material on these keys. I think this keys are from…
I retrofitted a GARMIN navigation into my Volvo S60R from 2003. Downloads: baseplate for your own navigation project baseplate for GARMIN Drive 5 Plus My thread on swedespeed:…
The cable from the internal door handle to the latch can break, and the part is no longer available (the cable for generation 2 seems to still be available). This guy made a fix with some cable ties: and I actually think it is a good and…
It's compatible with the V70 (post-2005). It's not perfect, but it works. I printed it with supports only on the edges and used bridging. I use ABS.
This is a bayonet ring for your M39 enlarger lens so you easily can attach it to your Fujimoto G70 (or V70) enlarger. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2mm…
Keyrings for Volvo S40 V40 S60 V70 Printable w-out support. but best result with support for the "attachement ring"
I used silver PTEG for filament and then some 3M doublesided adhesive tape to secure it.
Hi everyone! Recently my friend asked me to print him AC probe cover for his Volvo V70, so this is what I came out with. It isn't perfectly alligned, so you need to use some assertive force to push it into place. If I had more time for…
Needed a non-destructive way to mount work lights to my 2016 XC70, but I didn't want to drill any holes, so I made this mount. Printed with Bambulabs H2D, ABS and 30-35% infill. This will unfortunately not fit the P2 roof rails. There are…
This adapter allows you to mount a Morimoto projector inside of the original Volvo xenon reflector headlight housing
Printing out of hard TPU recommended for robustness, impact resistance and to avoid scratching - had good results with 98A but standard 95A would probably work. Originally designed to have a soft TPE grip ring, but I found it quickly got…
Clips for Lian Li PC-V700 and other Lian-Li cases for holding sidepanels 15x14x9mm
Volvo V70 / S60 / S80 — Drop-in Cupholder (OEM-style) A clean, drop-in cupholder that turns the unused coin tray (muntenbakje) of your 2001-era Volvo center console into a proper can/bottle holder. Designed to look factory once finished —…
This is a DIY Brake Caliper Dust Boot Installer Tool designed for Volvo P2-platform vehicles, including the S60, S80, V70, XC70, and XC90. The tool is fully 3D-printable. An integrated M8 hex-nut bump in the center allows the tool to be…
Well, my wiper mount broke so i designed a replacement part updated design with version v2 Print Settings Printer Brand: Creality Printer: CR-10S Supports: Yes Resolution: 0.16 Infill: 100% Filament: Fiberlogy ABS Black Notes: Due to the…
Another model of a TPS adapter to use on a stock B230 throttlebody, my 14 year old bosch style TPS adapter was faulty due to trace or brush being worn inside of it, possibly also a very loose fit on this chinese made low priced unit. This…
Fits well enough. Printed in PLA with supports under the overhang. Spare part for Volvo V70 2007-2013 Reference number for spare part 31353583 2
The old key was sticky. U need to cut true the old plastic watch out for the chip, there is videos on how to cut it on youtube. Stock 0.16 settings in bambu slicer
This is a versy specific model as it was made to fit an SV705C astro camera that doesn't come with a fan by default. The mount provides special clamping points to mount a special fan onto it while also providing a cable comb for cable…
This is a DIY Fuel Pump Lock Ring Removal Tool made specifically for Volvo models including the S60, S80, V70, XC70, and XC90 (P2 platform). I fabricated the tool from scrap metal, using a 20x20 mm L-shaped profile that I bent to form the…
Added some screws to my broken armrest as nearly all clips and holders were broken. Just super glued in place. Bore 3.25mm (please adjust for your needs) Print Settings Rafts: No Supports: No Resolution: 0.24 Infill: 30
V70 button panel panel for button/switch mount to center console
I found that the USB cable on the SV705C is very loose, so it disconnects easily when the telescope slews. So I made this to provide a bit of stablity to the cable. This is friction fit, as in VERY friction fit. It's not coming off any…
Transmission side bushing for lower torque mount. Made for 2001 V70 XC 2.4T. So should fit 2001-2007 gasoline engines. I'm not sure if diesels use the same lower mount.
This is a complete redesign, from the ground up in Freecad, of my original Volvo Door Lock Ring that has been optimized for printing with a 0.4 nozzle and snuger in-the-door fitment. Also, with more control, and a lot of practice, i was…
Die Puffer in der Rücksitzbank bei einem Volvo 850 oder V70I lösen sich mit der Zeit und die Rücksitzbank fängt an zu klappern. Da es diese Puffer nicht neu gibt, habe ich sie neu Designed. Gedruckt habe ich die in TPU 95Shore mit 35%…
As the summary states, this is something i remixed, but is an original to fit specific car model and i put it togheter in Fusion360. All the measurments are taken from my own Volvo V70 D4 2013, at the air outlet on the left hand side of…
I made this because the mounting points on the filter cap broke off. This can be used to clamp the filter cap back on. It includes a sacrificial layer in the hole, so no supports are needed.
Replacement headlight dust cover for Volvo V40/V70 halogen headlights. Printed in two parts: Body: recommended to print in a temperature resistant material Oring: recommended to print in a flexible material. Designed to replace part…
you will need two m3 bolts with nuts Replaces the factory Autoliv phone keypad module in the center stack of Volvo P2 cars (XC70 2003-2004 verified, part number 30657804). The old module is dead weight in every one of these cars now, and…
Drop-in replacement for the center console storage tray on Volvo P2 cars (XC70 2003-2004 verified, part numbers 3409847 / 9204996 / 30643182), plus a removable cup caddy that drops into it. Fits the OEM mounting points: two screws and a…
Kann in die Aufnahme für eine Anhängerkupplung an eines Volvo V70 gesteckt werden, für besseres Aussehen / gegen Schmutz
A lamp stand designed for Steve's Vase 707 model. It allows you to use the Vase 707 as a table lamp. You can download the Vase 707 model here. https://www.printables.com/model/310118-vase-707 You need to press it with support to ensure…
AVID CNC AVx0S Spindles - Simple to print dust shoe for the AVID smart spindles. The skirt is in two parts so you can remove the front half to do a bit change without having to remove the full skirt. I chose to use Magport dust adapters…
Volvo V70 S60 injector dummy plugs Ideal for cleaning, sanding etc Fits for my V70 T5 B5234T3 engine but should fits for most petrol engines with port injection Chest rest of my Volvo dummy plugs feel free to scale it to 101-102% depends…
Volvo v70 Center Cupholder Cover 2014-2016. (Probably fits the models with the same side by side cupholders).
Ideal for cleaning, sanding etc Fits for my V70 T5 B5234T3 engine but should fits for most Volvo engines
Statív VELBONE DV7000 držiak káblov
Simple wall holder for the line locator There are 4mm holes for screws in the rear part of the housing. Printed with PETG and 15% infill.
Ideal for cleaning, sanding etc Fits for my V70 T5 B5234T3 engine but should fits for most Volvo engines
This is the valve that sits on top of the valve cover on a 2.5 tdi powered volvo V70 / S70 P80 , maybe P2 and possibly S80, that connects it to the intake pipe, before the turbo. It's the mirror of the CCV valve from a 1.9 TDI ALH,…
AVID CNC AVx0S Spindles - Simple to print dust shoe for the AVID smart spindles. The shoe comes in 3 pieces, the main shoe with pass through for air assist and nozzles, the dust collection box, and a dust skirt ring with guide holes to…
Print with logo facing up and support for key and chip recess
This is strengthened fuel lock gear for Volvo V70 II and probably other Volvo cars on platform P2. The original dimensions would just not hold. So I remixed it and made the weak point, which is the worm gear stronger and made the…
repariert Volvo V70 Kofferraumboden Griffmulden Schraubloch
Der Halter für die Batterie in der Funkfernbedienung erfüllt mit der Zeit nicht mehr seine Funktion, da die Haltenasen, die die Batterie an Ort und Stelle halten, brechen. Ich habe mit die Mühe gemacht und den Halter nachgebaut. Hinweis:…
Znak je kompatibilní se standardní maskou Volvo V70 II generace. Materiál PETG, jednotlivé díly slepené sekundovým lepidlem. Určen k zalití do pryskyřice - Zalití přímo do masky (moje variata v masce), nebo do odlévací nádoby s následnou…
Replacement flange for Volvo V70 turbo air intake (part number 31269238) printed with ASA CF 100% infill. The sleeves from the original part must be melted into the model. If the sleeves are pressed in, the two holes may need to be…
My Sister got a new (used) Car and wanted a way to store a Drink. I was happy to have found one on Thingyverse but thought that there is enough Space to include a hole for the Vape of my Sister and her Father.
Needed a non-destructive way to mount work lights to my 2016 XC70, but I didn't want to drill any holes, so I made this mount. Printed with Bambulabs H2D, ABS and 30-35% infill. This will unfortunately not fit the P2 roof rails. There are…
Summary This project provides printable negative holders for Epson range of flatbed scanners with transparency support, namely: v700, v750, v800 and v850. The main objectives of this project are: to allow for easy and precise negative…
Replacement flange for Volvo V70 turbo air intake (part number 31269238) printed with ASA CF 100% infill. The sleeves from the original part must be melted into the model. If the sleeves are pressed in, the two holes may need to be…
AVID CNC AVx0S Spindles - Simple to print dust shoe for the AVID smart spindles. The shoe comes in 3 pieces, the main shoe with pass through for air assist and nozzles, the dust collection box, and a dust skirt ring with guide holes to…