Wyniki wyszukiwania: x300

Sortowanie

Liczymy pasujące modele…

P
PrintablesAlex_P

Indexing / dividing plate (Teilscheibe) for lathe Paulimot PM190-V or Optimum D180x300

The main part is the dividing plate fitting to the main spindle nut with: 0°, 90°, 180°, 270° indexes 1°, 5°, 15° marks and holes for fixing in 7,5° intervals Best it is printed with a color change after the first 0.5mm for good contrast…

Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu

Pobrania
114
Polubienia
15
Ocena
0
P
PrintablesAlex_P

Lathe Die Holder for 22mm tail spindle (e.g. for Paulimot PM190-V or Optimum D180x300)

Die holder for lathe tail spindle with 22mm diameter and dies with 25mm diameter.

Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu

Pobrania
48
Polubienia
10
Ocena
0
P
PrintablesCodeName X

Wydruk około 12,39 €–15,14 € nettoWstępna wycena jednego wariantu

Pobrania
9
Polubienia
1
Ocena
0
P
Printablesmsystems

Core & Tray for 1.2L ASRock a300 and x300 case (DeskNano x300 compatible)

The 1.2L Replacement case for DeskMini x300. Basic “slots” styled core that's compatible with the whole DeskNano x300 system. This core fits most coolers, but doesn't fit Wraith Stealth. See if you can print this first, since the other…

Pobrania
1297
Polubienia
51
Ocena
5
P
PrintablesPedja

Aluminum profile 15180x300 (CNC 3018)

3D model of aluminium profile 15180 used for CNC 3018. Dimensions 15 x 180 x 300 mm. There is also DXF with cross section drawing. Print instructions Category: Machine Tools Summary 3D model of aluminium profile 15180 used for CNC 3018.…

Pobrania
1094
Polubienia
85
Ocena
5
P
PrintablesTHop3D

Nature Wall Art with 2 deer and 3 mountains 600x300mm + loose parts cut to 200x200

Nature Wall Art with 2 deer and 3 mountains The full model is 600mm wide, 300mm high and 3mm thick. There are also pre cut parts so it can be printed on smaller printers 200x200 and can be assembled later. I suggest assembling with glue…

Pobrania
896
Polubienia
212
Ocena
5
P
Printablesmsystems

Lids for DeskNano x300

Lids for DeskNano x300. Supports pretty much any cooler. Cutout and Mesh styles. Mesh is a slicer based technique. To create the "Mesh" effect, just set top & bottom layer height to = 0, walls to 2mm, infill to 15%. Then experiment with…

Pobrania
848
Polubienia
17
Ocena
5
P
PrintablesAWSW

Gridfinity base + boxes for aidB Eurobox 400x300 x 120&75mm

Gridfinity base + boxes for aidB Eurobox NextGen Economy 400x300x120mm and 400x300x75mm which will add 2 or 1 layers of 52mm high boxes into the Eurobox. Features: Custom base plate in 4 parts which will fit into the Eurobox with a gap of…

Pobrania
667
Polubienia
158
Ocena
5
P
PrintablesMi09

300x300 Bed Leveling Calibration Test

Designed in FreeCAD. I made this Bed Leveling Calibration Test for Creality Ender-3 S1 Plus Size: 300 x 300 mm Set Skirt loops to 0 for this test if you use this option. Total Time: 23m24s

Pobrania
628
Polubienia
8
Ocena
5
P
PrintablesHyperbeam

Beyerdynamic Hinge Slider Replacement/Upgrade for DT770 Pro, DT770 M, DT990 Pro, DT990, DT880, Custom One Pro Plus, TYGR 300 R and MMX300 MK2

Beyerdynamic Hinge Slider Replacement/Upgrade for DT770 Pro, DT770 M, DT990 Pro, DT990, DT880, Custom One Pro Plus, TYGR 300 R and MMX300 MK2

Pobrania
572
Polubienia
17
Ocena
5
P
Printablesmsystems

m.2. Tray Cover for DeskNano x300

m.2 Tray Cover for DeskNano x300. For extra thermal performance you can experiment with printing the Tray with the Mesh technique (Top & Bottom layer height = 0, 25 to 50% infill, and 2mm wall thickness). It will be less rigid, but turn…

Pobrania
452
Polubienia
12
Ocena
5
P
PrintablesMoixo

300x300 First layer calibration. Bed Tiles

A pack of resources to check and test the bed calibration in 300x300 printers. Like the Artillery Sidewinder X4+, Artillery sidewinder X3+, Elegoo Plus, and others. It will print small squares of 20x0,4mm (two layers) Recommendation: If…

Pobrania
418
Polubienia
16
Ocena
0
P
Printablesmsystems

Liter of Ryzen (Deskmini x300 Ultraslim, .9L)

For when the 1.2L 3d case isn't small enough. Important information and disclaimer (read): It only works with Deskmini x300 and the ID-Cooling IS-30. It will not be compatible with anything else. The IS-30 is not perfectly compatible with…

Pobrania
411
Polubienia
26
Ocena
5
P
PrintablesJordan Neenan

Vesa Adapter 100 to 200x300

I am using an LG 42" TV as my computer monitor but it has a Vesa 200x300 mount size, so I designed this adapter so I could use my monitor arm which is Vesa 100. You will need to print 2 of these, one for each side since I printed it on an…

Pobrania
366
Polubienia
40
Ocena
5
P
Printablesspiggytech

Spiggytech X300U-A Thumb Stop Grip Assist

This is a modest upgrade to the Surefire X300U-A by replacing one or both of the existing rail clamps with an extension piece. Background: These were iteratively developed in about 9 stages. I later found out similar products already…

Pobrania
339
Polubienia
16
Ocena
5
P
Printablesmbiersack

Duct to Window Adapter - 4" to 50mmx300mm

Adapter to vent 4" (100mm) diameter ducting through my window. rectangle side is about 50mmx300mm Category: Tools

Pobrania
299
Polubienia
34
Ocena
0
P

Intex/Steinbach ZX300 - T5-B6-Z19 (96mm) Antriebsriemen Reinigungsbürste / belt for cleaning brush

Da bei meinem Intex ZX300 Poolsauger nach jeder Saison der Antriebsriemen für die Reinigungsbürste das Zeitliche segnet und man von Intex keinen Ersatz dafür bekommt habe ich mal einen Riemen mit dickerem ‘Rücken’ gezeichnet und in TPU…

Pobrania
261
Polubienia
11
Ocena
5
P
Printablesdark256

Wall support for Xiaomi AX3000T

Wall support to install this xiaomi router. Added some design features...

Pobrania
251
Polubienia
23
Ocena
5
P
PrintablesDavid Holecko

CLAMP HOLDER 50x300 mm

CLAMP HOLDER 80x350mm https://www.printables.com/cs/model/819713-clamp-holder-80x350mm CLAMP HOLDER 120x400mm https://www.printables.com/cs/model/828691-clamp-holder-120x400mm

Pobrania
250
Polubienia
44
Ocena
5
P
PrintablesL4s3rF4c3

Bucket lid split to fit 300x300 print surface

Simply took the original bucket lid and split it adding holes for reconnection using 10-32 nuts and bolts.

Pobrania
249
Polubienia
13
Ocena
0
P
PrintablesKazi Toad

Action camera pistol grip for Sony FDR-X3000

These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is a pistol grip is designed for the Sony FDR-X3000…

Pobrania
226
Polubienia
25
Ocena
0
P
Printablesmsystems

Sata Storage Bay for DeskNano x300

Fits the 15mm thick 5TB 2.5" drives and a 120mm fan to transform the DeskMini into a mini-NAS. 1.2L 3D printed case for ASRock a300 and x300 mini pc. For more info & instructions see the DIY guide on this page:…

Pobrania
222
Polubienia
5
Ocena
0
P
Printablesmsystems

VESA Adapter for DeskNano x300

Vesa adapter for DeskNano. Contributions from NiceDepth. ------------------------------------ 1.2L 3D printed case for ASRock a300 and x300 mini pc. For more info & instructions see the DIY guide on this page:…

Pobrania
211
Polubienia
8
Ocena
0
P
Printablesxp1ratex

Voron 2.4 300x300 panels and removable door

I got tired of the panelclips on the original 3mm acrylic panels, the foam glided down and the panels was moving towards gantry so it got scraped. Made a printable frame in 16 pieces to acomondate foam and hold the panel tight against the…

Pobrania
208
Polubienia
48
Ocena
5
P
Printablessmuk3d

Pulling Rod even longer for MK3 and CR10 (300x300 bed)

longer is better länger is besser :-D

Pobrania
203
Polubienia
9
Ocena
5
P
Printablesmsystems

GPU Adapter for DeskMini and DeskNano x300

Disclaimer: Experimental feature. Use at your own risk. Performance penalty of using m.2 (4 lanes) is approximately 5-10% up to the 2080ti/3060ti level . If you use a more powerful card than this, your “lane penalty” will begin to…

Pobrania
202
Polubienia
26
Ocena
0
P
PrintablesMunsfred

Belt for Intex ZX300

Belt for intex robot ZX300,Print to Anycubic 4Max, Couche: 0.15 Temp: 215°C Bed: 0°C Speed: 15mm/s First Layer: 10mm/s Speed Outer Wall: 7mm/s Speed internal Wall: 10mm/s Print Settings Printer brand: Anycubic Printer: Semi-closed 4Max…

Pobrania
196
Polubienia
10
Ocena
5
P
PrintablesAlex Tadevosyan

TP-Link Deco AX3000 X55 Router Wall Mount

Small wall mount for the TP-Link Deco AX3000 X55 Router. It has two versions, one meant to be used with 3M Wall strips for clean mounting and removal, and one with a screw hole. Arch design supports the weakest area of the print so it…

Pobrania
183
Polubienia
20
Ocena
5
P
PrintablesAndrey Itsko

Wall mount for Redmi Router AX3000T

Wall mount for Redmi AX3000T router. Suitable for mounting on any flat surface using screws or double-sided tape

Pobrania
178
Polubienia
12
Ocena
0
P
PrintablesPolyPrint

Bed calibration 300x300

Simple Calibration for 300x300mm

Pobrania
168
Polubienia
4
Ocena
0
P
Printablesmsystems

SSD Caddy for DeskNano x300

Easily add one standard 7mm thickness SSD to the rear of DeskNano. Part A - SSD Caddy Part B - m.2 Cover (optional) For more serious storage see the “Storage Bay” (up to 10TB). Parts: 5x - M3 x 8mm (for Caddy) 4x - M3 x 5mm (for SSD)…

Pobrania
158
Polubienia
5
Ocena
5
P
PrintablesJens83

Bosch PEX300 PEX400 osVAC adapter

Adapter for Bosch PEX300 and PEX400 orbital sander. Tight fit, might fit other Bosch sanders as well if they have the same connector. The design is off center to achieve a larger distance of the hose to the work piece, make sure to attach…

Pobrania
153
Polubienia
14
Ocena
0

Leveltext 300x300 mm (30x30 cm)

Simple leveling test for 30x30cm Printers. Live-leveling is recommended. Recommended nozzle size is 0.4mm with a layer height of 0.2mm. Attached is a Simplify3D factory file for the CR-10s, use at your own risk. Print Settings Rafts: No…

Pobrania
148
Polubienia
5
Ocena
5
P
Printablesmsystems

Adjustible Lid Shim for DeskNano x300

You can use this to offset the height of the existing lid sets to account for differences in fan thickness and cooler height, and to decrease fan turbulence when using mesh. Instead of just changing the Z-height of the lids you can use…

Pobrania
143
Polubienia
2
Ocena
0
P
Printablesmsystems

Expansion Bay template for DeskNano x300

You can use this to help make your own expansions to DeskNano x300. This is the hole pattern and profile outline for the back side of the tray. ------------------------------------ 1.2L 3D printed case for ASRock a300 and x300 mini pc.…

Pobrania
136
Polubienia
6
Ocena
0
P
PrintablesVeillax135

36pt/49pt Bed Leveling Mesh for 300x300mm Bed

This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 36pt mesh is constructed of 36 16.5mmx16.5mmx0.2mm squares in a 6x6 grid with 1.65x280x0.2 lines connecting each grid element to provide…

Pobrania
134
Polubienia
5
Ocena
5
P
Printablesspiggytech

spiggytech portable chassis for ASRock X300M-STX

Revisiting a concept I made about a month ago, I started from the ground up on a new design piece. The design directed I wanted to move towards was to give it a large amount of activity when assembling the case, so that there would be an…

Pobrania
126
Polubienia
17
Ocena
0
P
PrintablestbkMAKER

Sony AS300/FDR-X3000 Cable Saver Case

*(Update: Made lens mount UNIVERSAL, now fits most 52mm lens. 5/12/25 * *(Updated clearance 10/27/24) * The legendary @theRealShooKon3 reached out to me with a problem that needed a solution. His IRL streaming camera kept breaking due to…

Pobrania
124
Polubienia
8
Ocena
0
P
Printablesgregma

Large Falcor (300x300)

A remix of the original increasing size so it fills a 300x300 bed. Print Settings Printer Brand: Sovol Printer: SV07+ Rafts: No Supports: Yes Resolution: .18 Infill: 15% Filament: Generic PLA White Notes: This was designed for that sized…

Pobrania
124
Polubienia
10
Ocena
0
P
PrintablesOSi

Sony FDR-X3000/X1000 helmet side mount

Action camera helmet side holder I made this holder to be connected directly on helmet by 3M VHB tape or zip tie. However zip ties requires to makes holes into helmet, which is not recommended way ( keep on mind that any modification of…

Pobrania
123
Polubienia
13
Ocena
0
P
Printablespoloon

300x300 0.2mm Bed Mesh

300x300 bed mesh first layer test that i designed for my voron 2.4 Recommend 0.4 nozzle size with 0.2 layer height

Pobrania
121
Polubienia
1
Ocena
0
P
Printablesxp1ratex

Voron 2.4 300x300 extrusion cover

This is a extrusion cover for Voron 2.4 300x300. It covers the 2020 extrusions and add dampening to the bottom deck with foam. Same model printed 2 times since left and right is the same, no supports needed. Printed with 0.2 layer,…

Pobrania
120
Polubienia
35
Ocena
5
P
PrintablesADIcrafts

ADI Chrono Case for HT-X3006/3005plus Chronograph 24mm

ADI Chrono A custom case for HT-X3006/3005plus chronograph (24mm) ================================================================= FEATURES A case with style 3 parts build, ready for color combinations Tripod mount thread Direction…

Pobrania
117
Polubienia
12
Ocena
5
P
PrintablesDragi2k

ERCF N9 V2.4 300x300 Mount

A Mount for a 9N ERCF on the Back of a 300x300 Build Volume V2.4 You need also : 4x M5x23mm + https://github.com/Tircown/ERCF-easy-brd/blob/main/mods/Bottom%20bracket/ercf_easy_brd%20bracket%20bottom.stl and…

Pobrania
115
Polubienia
29
Ocena
0
P
PrintablesEgorka555

Grille for skirt Voron 2.4 R2 300x300

Grille for skirt Voron 2.4 R2 300x300

Pobrania
111
Polubienia
36
Ocena
5
P
PrintablesDarkro

Wall support for Xiaomi AX3000T

Wall support to install this xiaomi router

Pobrania
110
Polubienia
11
Ocena
5
P
PrintablesBlargedy

O-Light PL-PRO Valkyrie Fixture To Fit Surefire X300 version of the blackhawk Omnivore

This piece allows an O-Light PL-PRO Valkyrie flashlight to fit into a surefire x300 specific omnivore holster. The omnivore will need some modification to the rails to fit in, but will then engage the snap as the x300 would. Print in…

Pobrania
108
Polubienia
5
Ocena
0
P
Printablesk2thestank

Speed Cycle Test 300x300 beds or bigger

Self created speed and acceleration test for large beds 300x300 beds only this file is 250x250 Category: 3D Printing

Pobrania
106
Polubienia
9
Ocena
5
P
Printablesfocus

Noctua NA-FD1 Fan Duct for Asrock Deskmini X600 + X300

I remixed this model from the original Noctua design to fit into my Asrock Deskmini X600 with the Noctua NH-L9a-AM5 fan. It should be suitable for the AMD AM4 and L9i (Intel) version and Deskmini X300 as well. You just need 4x 20mm M3…

Pobrania
99
Polubienia
7
Ocena
5
P
PrintablesKorbi Muster

Chronograph HT-X3006 Coverplates (Inlet and Outlet)

Modelled these to fit on the cheap chronograph that you can get on Aliexpress (see screenshot). They are replacing the standard plates. I used new M2,5x5mm screws but I think you can also use the original screws with some minor adaptions.…

Pobrania
99
Polubienia
10
Ocena
0
P
PrintablesBrianchenito

TLR-1 / x300 Compatible Airsoft Glock Slide Locking Holster

A holster that mechanically resembles certain commercially available A utomatic L ocking S lide Holsters. Airsoft only, please do not use this for actual carry! Just buy the real one, please. Compatiblity: This Holster was built around a…

Pobrania
96
Polubienia
18
Ocena
0
P
PrintablesKasper Walczuk

SONY RMF-TX300E TV remote battery cover replacement

Cover designed for SONY RMF-TX300E. The original cover gets worn out and doesn't stay on, so here is a replacement ;)

Pobrania
94
Polubienia
10
Ocena
5
P
PrintablesVA7DBJ VA7DBJ

TP Link WiFi6 AX3000 mount

Allows mounting of the TPLink AX3000 wifi antenna to a wall. Use #4 wood screws.

Pobrania
91
Polubienia
2
Ocena
0
P
PrintablesWongRaeJian

HT-X3006/HT-X3005 Adapter 16mm

Adapter for HT-X3006/HT-X3005 chronographs, allowing them to be stuck right onto standard NERF 16mm barrels, ensuring the dart's flight path and chrono are parallel to each other to get more accurate readings. There is a tolerance of…

Pobrania
88
Polubienia
6
Ocena
0
P
Printablesstibi

4.2" 400x300 ePaper / eInk case

A simple case for the Good Display GDEY042T81 4.2" 400x300 ePaper

Pobrania
85
Polubienia
8
Ocena
0
P
Printablesakimakes

Quick Bed Level Test 300x300mm

A fast bed level test meant to be observed live to be able to make real time adjustments. Overall size: 300x300mm The model consists of: Two thin frames to with a crossection of 1.2x0.2mm - which equals 4 extrusion paths a 0.4mm in width.…

Pobrania
81
Polubienia
1
Ocena
0
P
Printablesprintinbaby

Intex Vacuum Cleaner ZX300 adapter

To connect an Intex Vacuum ZX300 over pressure valve to a male threaded inlet or return (mine 57.40mm / 59.50 mm). The ZX300 part is designed by fbruecken with this design The male part is designed by myself

Pobrania
80
Polubienia
4
Ocena
0
P
PrintablesKonstruction

Eurobox 400x300x200 mm

Bin that fits in a Eurobox 400x300x200 box as a 2 piece devider Print instructions pla 0,3 mm works fine

Pobrania
79
Polubienia
4
Ocena
0
P
PrintablesBlajack

Wall support for Xiaomi AX3000T

Wall mount bracket for Xiaomi AX3000T router. This 3D printable wall support allows you to securely mount your Xiaomi AX3000T WiFi router on the wall. It helps save desk space, improves cable organization, and keeps your home network…

Pobrania
76
Polubienia
5
Ocena
0
P
PrintablesEirik R

Shopvac adapter for Bosch PEX300 AE sander

I designed this simple adapter so that I could connect my shopvac to my orbital sander. It fits the profile of the sanding platform as well as the connecting pipe, giving a very solid and snug fit. The hose connection is 35 millimeters,…

Pobrania
75
Polubienia
4
Ocena
0
P
Printablesspiggytech

spiggytech Lantern chassis for ASRock X300M-STX

The project started as a concept for a cylindrical “Trashcan” Chassis for the ASRock X300M-STX found in the Deskmini. The whole thing measures 225mm tall from end to end, not counting feet. 175mm in overall diameter from the widest parts.…

Pobrania
75
Polubienia
11
Ocena
0
P
Printables3DGearSupply

Ruger MK IV Tactical X300-B Key

This key replaces the factory picatinny key to allow your X300-B to sit closer to the frame on a Ruger MK IV tactical

Pobrania
73
Polubienia
13
Ocena
5
P
Printablesgleonard3

WH01X30057 Lock Bar for GE Washer Door Hinge Direction Reversal

I was annoyed that I had to buy this when it wasn't provided with my newly delivered washer. Now you don't have to.

Pobrania
72
Polubienia
5
Ocena
5
P
Printablesjohnytriplex

Wall mount CUDY AX3000

This is a robust wall mount for the AX3000 router, which can be mounted directly on the wall or on a flush-mounted box with a hole spacing of 60 mm (for this option, holes must be drilled on the back side of the wall platform part). A…

Pobrania
72
Polubienia
6
Ocena
0
P
PrintablesEric BEAUGUITTE

Pool cleaner ZX300 adapter

Adpater a Intex Vacuum ZX300 over pressure valve to a male threaded inlet or return: 52 mm. The original ZX300 part has been designed by fbruecken Printed with Prusament PETG filament. Works pretty good.

Pobrania
68
Polubienia
4
Ocena
0
P
PrintablesWorkshopLife930

TV Remote Control Wall Mount Holder - Sony RMT-TX300E - Lightweight & Strong

Keep your living space organized with this sleek and sturdy wall mount designed for remote controls. This model is optimized to be lightweigt to save filament, yet strong enough to hold your remotes securely. 3 Versions included: -1:…

Pobrania
66
Polubienia
6
Ocena
5
P
Printablesxp1ratex

Voron 2.4 300x300 moved switch, inlet + ethernet

Wanted to move the powerswitch to the left side and the power inlet + ethernet to front right side for easier acess. Re cad:ed the original side skirt with a filtered inlet and a keystone opening. Redid frontskirt based on V2.4 Z-Drive…

Pobrania
66
Polubienia
10
Ocena
0
P
PrintablesLawrence H

CR10 Smart Pro (300X300) Bed Camera Mount

Printed with PETG. Used 2 M3X8 screws and 2 M3 knurled nuts for easy on/off. My .stl has a dogear as I had also originally tried to print in ABS and this was necessary to prevent warpage/lifting. Thanks, ChokletMoose and Sneaks for two…

Pobrania
66
Polubienia
12
Ocena
0
P
PrintablesFerrariGuy

Jaguar X300 / XJ40 Dash Vent Louver Synch Clip

Tired of those broken flappy unsynchronized louvers on you X300 or X40 center vent? This might help. It is a replacement synch/tab for that brittle broken one that fell apart long ago. (Edit: 2023 update) The files have now been updated…

Pobrania
65
Polubienia
3
Ocena
0
P
PrintablesJean R Built

Piñasphere (Asrock X300M) - CMWS22 - CUSTOM PC CASE - AWARD WINNER

""UPDATE GEN 2026: I apologize to anyone who tried this project cause it was missing the power button and the radiator side clear dome. I know it's been some time from my last posts, but life got in between and I got lost in it. If you…

Pobrania
64
Polubienia
18
Ocena
0
P
Printables3DGearSupply

Ruger MK IV Tactical X300-A Key

Key to scoot the X300-A back closer to the frame on a Ruger MKIV

Pobrania
62
Polubienia
4
Ocena
0
P
PrintablesFufus

2,5" Hard disk tray for Fujitsu RX300 S8

A 2,5" Hard disk tray for for the Fujitsu RX300 S8 Server. It might work in other Fujitsu Servers too. Feel free to add more Server models in the comments. You will need supports for some parts of the model.

Pobrania
61
Polubienia
5
Ocena
5
P
PrintablesNik

Flashforge Adventurer 5M adapter to the "Slim Shady" for using square (300x300) glass

Slim Shady's wonderful “head” uses plexiglass of special dimensions, and even with rounded edges. If you don't have the right tool, it's a bit of a challenge to make such a glass. You need to look for a workshop that will cut out the…

Pobrania
60
Polubienia
13
Ocena
0
P
Printablesspiggytech

spiggytech chassis for ASRock X300M-STX

EDIT! This item is now obsolete, the newest design can be found here: https://www.printables.com/model/319513-spiggytech-portable-chassis-for-asrock-x300m-stx This project is a work in progress The idea is to build a small enclosure for…

Pobrania
58
Polubienia
7
Ocena
0
P
PrintablesRonnie The Bear

Asus RT-AX3000 Vertical Stand

Vertical stand for an Asus RT-AX3000 router, clearing up desk space and allowing antenna positions you otherwise couldn't achieve. The “wings” above the mounting pegs provide a surface for the router feet to rest against. Suggested print…

Pobrania
56
Polubienia
1
Ocena
4
P
PrintablesBitsAndDroids

Voron 2.4 300x300 removable door, shortened

I had to shorten the original model by 2.6mm to fit my V2.4 300x300; please measure twice before printing. 29

Pobrania
56
Polubienia
10
Ocena
0
P
PrintablesGrandCedre

UTZ RAKO 400x300x132 divider

For RAKO 400x300x132 mm I've designed this divider for a rako box to fit all of my camera assistant junk. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: .25 Infill: 5 Filament: SwissFil…

Pobrania
55
Polubienia
15
Ocena
0

cnc 3018 pro extended to 320x300mm

This is a remix Spoil Bed Holder for Sainsmart 3018-pro cnc router, to extend the cnc 3018 pro work plane to 320x300. Fit well, and very usefull. You need 4 pices.

Pobrania
54
Polubienia
8
Ocena
0
P
Printablescekpi7

Door vent v2 100x300mm

Updated version of my door vent. You can put it on doors, printer enclosures, dehydrators, pretty much anywhere where you need airflow. Face is 1.5mm in height and 10mm offset, rear side is 15mm. Doors should be at least 30mm thick.…

Pobrania
52
Polubienia
5
Ocena
0
P
Printablesdatapagan

HT-X3006 Chronograph - Airsoft 14mm CCW mount

Attach a chronograph straight to your RIFAttach a chronograph straight to your RIF printed at 0.2 height, 4 walls, 15% infill

Pobrania
49
Polubienia
3
Ocena
5
P
PrintablesHex Rebuilt

MX5 Miata 2DIN frame for Sony AVX300 headunit

This is a quick and frame to cover the gaps left around the tombstone with modern headunits. print it with supports and in PETG/ABS, mine is in PETG and is still there after one of the hottest summer in history. Keep in mind that mine is…

Pobrania
49
Polubienia
5
Ocena
0
P
Printablesanchorman.nz

SEADOO FISHPRO SIMRAD NSX3007 fishfinder adapter

FISHPRO Adapter for the NSX3007.. https://www.simrad-yachting.com/en-au/simrad/series/nsx/nsx-3007-ai-xdcr--ausnz-chart/

Pobrania
48
Polubienia
4
Ocena
0
P
PrintablesMatthew Watts

Cudy WR3000 AX3000 Slide Mount For Cieling

A quick release ceiling mount to use my Cudy Router as a Wifi AP with excellent positioning for a strong signal. One side screws to the AP using M3 Screws and a Nut and or washer to slide into the APs wall mount slots and grab a hold. The…

Pobrania
47
Polubienia
2
Ocena
0
P
Printablesspiggytech

spiggytech chassis for ASRock X300TM-ITX V2 w/ Carry Handle

Updated 6/3/2023 Added screw holes for TPU feet. Also added feet to be made in TPU. Redesigned it from the ground up. This project is a work in progress I took the strong points of the original design and revamped it in such a way that…

Pobrania
47
Polubienia
11
Ocena
0
P
Printablesmikrom

Vesa 300x300 to 100x100

IG post: https://www.instagram.com/p/BzpaJMpovue/

Pobrania
47
Polubienia
9
Ocena
0
P
PrintablesPanicCarefully

BOSCH KIOX 300 compact wallmount (also suitable for KIOX300 equipped with a protective cover)

This is a remix of my older remix. The new model is is more compact - the keys are strored in front of the wallmount, not at the bottom - saves space can be used with or without a protective case over KIOX300 The model consists of two…

Pobrania
43
Polubienia
6
Ocena
0
P
Printablestom198
Pobrania
43
Polubienia
2
Ocena
0
P
PrintablesJoelTR

ASUS Router RT-AX3000 Stand

ASUS Router stand for RT-AX58U or RT-AX3000. I superglued the support to a pair of stands. I also uploaded a one-piece version

Pobrania
41
Polubienia
5
Ocena
0
P
PrintablesTermiko

Bosch Kiox300 Protective Skin

Bosch Kiox300 protective skin Used filament : TPU 95A Insert the tall side first and then push in the short side.

Pobrania
40
Polubienia
3
Ocena
0
P
PrintablesKazi Toad

Sony FDR-X3000 action camera underwater housing lens cap

These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is a sliding lens cap for the Sony FDR-X3000 action…

Pobrania
40
Polubienia
6
Ocena
0
P
PrintablesPetri

20x3000 target sticker dispenser

20mm 3000 pcs roll target sticker dispenser. printed in pla, no supports. 15-20% infill for private use. 100% infill for shared use (shooting club).

Pobrania
39
Polubienia
3
Ocena
0
P
PrintablesHans Kloss

Bigger and Lighter Simple Indor Glider for 300x300 printers

Bigger and lighter simple Indor glider for 300x300 printers, with moved CG (longer front fuselage).Print with15% infill.

Pobrania
39
Polubienia
1
Ocena
0
P
PrintablesBlack-Villain

Jaguar X300 XJ6 Fuel Pump Mount (NNA6025BA)

I'm adding fuzzy skin to the "required" list, it helps immensely with PETG. Unknown for TPU but I assume it's the same. This is a replacement for the rubber fuel pump mounts/collars for the Jaguar X300 (XJ6/XJ12/XJR). As I recently found…

Pobrania
39
Polubienia
6
Ocena
0
P
Printablesspiggytech

spiggytech chassis for ASRock X300TM-ITX

This model has been discontinued from development. A new design can be found here. Designed it from the ground up. This project is a work in progress At Sub3L, this is a 3D Printed complete chassis for the ASRock X300TM-ITX . The cooler…

Pobrania
38
Polubienia
5
Ocena
0
P
PrintablesSneak78

Noctua NA-FD1 Fan Duct for asrock deskmini X300

As asked I post my remix of the noctua fan duct for my asrock deskmini X300 case. I first added some holes so only 5mm of the original hole's depth is left and I can use 20mm M3 screws. Then I added some more cuts so I can close the case…

Pobrania
36
Polubienia
1
Ocena
0
P
Printablesxp1ratex

Voron 2.4 300x300 extrusion cover - Bedfans + inverted z-chain

Added bedfans to fit the original extrusion cover. Added inverted z-chain files (inverted z-chain cover 1+2 and upper + bottom)

Pobrania
36
Polubienia
8
Ocena
0
P
PrintablesThor

Airsoft Mk23/ssx23 X300 flashlight mounting adapter

There wasn't really good way to mount a flashlight on the mk23. I realised that one version of the X300 comes with a plastic mounting piece, that is screwed onto the light. Image source: Evike.com I essentially just replaced that with a…

Pobrania
35
Polubienia
7
Ocena
0
P
PrintablesAlda

Vivo X300 Pro lens protection

Printed from Varioshare TPU flexi filament from Colorfabb, 0.2 mm. Attached to the case with double-sided tape.

Pobrania
35
Polubienia
3
Ocena
0
P
PrintablesDJC

Lexus NX300 cell holder

Ce model est pour un Samsung S20 il est possible de modifier la largeur du support.

Pobrania
34
Polubienia
2
Ocena
0
P
Printablesthemacboy

XY Calibration 200x200 and 300x300

Same of original: https://www.thingiverse.com/thing:29612 but with distance of 200 mm for better precision. Category: 3D Printing Tests

Pobrania
34
Polubienia
1
Ocena
0