Wyniki wyszukiwania: xh

Sortowanie

2327 modeli

P
PrintablesChrisfu

Quick connect exhaust hose mounting sets for portable ACs and dryers various sizes === no supports ===

I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…

Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
3472
Polubienia
1008
Ocena
4,91
P
PrintablesPeter Farell

Deadpool : Wrexham FC

Deadpool : Wrexham FC Should have given him some cleats. Feel free to accessorize and share.

Wydruk około 7,71 €–9,43 € nettoWstępna wycena jednego wariantu

Pobrania
600
Polubienia
147
Ocena
0
P
PrintablesDaHouzKat

Advanced Filtration System Adjustable Exhaust (v3) for the Original Prusa Enclosure

Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure Features Easy to print and to assemble All the printed parts…

Wydruk około 2,90 €–3,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
433
Polubienia
208
Ocena
4,89
P
PrintablesGizmo Goody

MagDuct Parametric xTool P2 Exhaust Duct Adapter and Internal Fan Spacer (non-MagDuct adapter also included)

Motivation I recently purchased a P2 Laser Cutter and AC Infinity 6” Inline Duct Fan intending to attach 4” ducting to the inlet side. But the outlet of the P2 was too small for 4” ducting. Additionally, the weak stock internal fan would…

Wydruk około 1,73 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
332
Polubienia
21
Ocena
0
P
Printablesjesh

Lado Exhaust Duct - Low Profile Side Exhaust Duct for the Core One

General Info: Duct protrudes 75mm from back face of printer. I haven't done any super scientific tests, but I haven't been able to see a difference in cooling performance compared no duct. I'm pretty consistently 7-8C over ambient at 40%…

Wydruk około 6,84 €–8,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
280
Polubienia
159
Ocena
4,8
P
PrintablesJ

Voron 2.4 Multi-Tool HEPA/Carbon Filtered Exhaust [Beta]

Exhaust housing, with carbon/HEPA filtering, to jam your multitool birds' nest into so we can pretend we have good wire management! Supports 2 to 6 tools. BOM (not including what you should have from the stock 2.4: 2-6x Molex Micro-Fit…

Wydruk około 17,59 €–21,50 € nettoWstępna wycena jednego wariantu

Pobrania
170
Polubienia
41
Ocena
5
P
PrintablesJ. Kaiser

Hose holder for exhaust hoses 100mm

I was at the hardware store and shocked at how expensive these holders are. So I looked on the Internet and found similar prices. Now here is a design for a hose holder that costs a quarter of what injection molded holders cost. This…

Wydruk około 5,89 €–7,20 € nettoWstępna wycena jednego wariantu

Pobrania
162
Polubienia
25
Ocena
5
P
PrintablesDeBeard

PC REAR EXHAUST VENT FOR PHANTEKS ECLIPSE P400 CASE

Redirect the airflow from your PC's rear exhaust fans upwards and away from the wall. The purpose is to expel hot air in a direction that prevents it from circulating back into the case through the lower slots. Originally designed for the…

Wydruk około 6,10 €–7,46 € nettoWstępna wycena jednego wariantu

Pobrania
145
Polubienia
26
Ocena
0
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Magnetic Exhaust Port System (No MMU Needed)

I needed a way to vent fumes for an upcoming project and that hexagonal cutout at the back of the Original Prusa Enclosure seemed like the perfect spot for an exhaust port. I turned to Printables.com hoping to find my work done for me.…

Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
102
Polubienia
46
Ocena
5
P
PrintablesHokkyokuguma

OSVAC Female F32 -> Karcher WD series with rubber seal [xHain]

Requires an O-ring measuring 34.52 × 3.53 mm.

Wydruk około 10,11 €–12,35 € nettoWstępna wycena jednego wariantu

Pobrania
101
Polubienia
2
Ocena
0
P
PrintablesZAYn0nDER

O`Brien v.113 "Gravekeeper" - Foxhole

Introduction As a long term player and fan of the Video-Game “Foxhole” made by “Siegecamp” I was stoked to see the new addition to the game since the last Update. The Warden O`Brien v113 "Gravekeeper" or its new nickname the “Bonewagon”…

Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu

Pobrania
93
Polubienia
10
Ocena
0
P
PrintablesZAYn0nDER

O`Brien v.121 "Highlander" - Foxhole

Introduction As a long term player and fan of the Video-Game “Foxhole” made by “Siegecamp” I`m proud to showcase the next Warden Armoured Car. The “Highlander” is a great addition to any attack force. Its manoeuvrable, speedy, brings a…

Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu

Pobrania
74
Polubienia
13
Ocena
0
P
PrintablesLeon.Reijnders

FlexHose Clamp 35mm Wabeco (OnShape)

Layereight 0,2mm infill 25% printed with PETG Link to OnShape Design: https://cad.onshape.com/documents/2b850d0cfd7afde39a812508/w/ebf24d973d0244120ccc61bd/e/855e238af5ad4239a24f65a1 2x M6x35mm needed 2x M6 Nut needed

Wydruk około 5,18 €–6,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
63
Polubienia
9
Ocena
5
P
PrintablesTechnickmods

CASADIO IMPR3ZA Rear Bumper - Dual Exhaust Version

Modified the rear bumper to offer a dual exhaust option. You'll need to mirror the actual exhaust in your slicer.

Wydruk około 3,59 €–4,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
45
Polubienia
9
Ocena
5
P
PrintablesBen

Replacement switches for Respekta JADE-L exhaust hood

Switches for Respekta JADE-L exhaust hood Use a material that can handle water vapor like PETG or ASA. Print with 100% infill, otherwise the handle has a tendency to break off. FreeCAD files are attached.

Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
38
Polubienia
2
Ocena
0
P
Printablest0b1

Exhaust hose wall mount

Wall mount for the exhaust hose of our aircon. The hose has an ID = 150 mm (approx. six inches). You can use two of them to connect two pieces of tubing. Update: added a slightly taller variant with a grille. See also our hose connector:…

Wydruk około 3,29 €–4,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
28
Polubienia
9
Ocena
0
P
PrintablesRPK

Reflexhammer / Rubber mallet

EN: Reflex hammer with chamber for brush and needle for sensitivity testing. The cap nut on the hammer head is size M8. We recommend inserting / gluing washers of sizes M6 and M8 into the hammer head before attaching the TPU parts for the…

Wydruk około 3,48 €–4,25 € nettoWstępna wycena jednego wariantu

Pobrania
24
Polubienia
5
Ocena
0
P
PrintablesVespercorp

Prusa Enclosure Fitted Exhaust Cover Plate

I like to cover unused spots and when I saw @DaHouzKat's “Advanced Filtration System Adjustable Exhaust” I thought the mounting plate model would make a great cover or gasket. And it did!

Wydruk około 0,97 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesDon Patrick

Rotrics DexArm Enclosure exhaust pipe coupling

The Rotrics DexArm / Hexbot robot arm combines with an optional safety enclosure box for laser engraving, with a built-in fan. However, there is no obvious way to attach a pipe or tube to guide the fumes outside. I designed a coupling…

Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu

Pobrania
14
Polubienia
0
Ocena
0
P
Printablessgeissler

Spacer for Lado Exhaust Duct

This is a simple 4mm thick spacer frame for the Lado Exhaust Duct by Jesh for the Prusa Core One to increase the clearance on the left. I added little grooves, to which I superglued a rubber lip for additional sealing and vibration…

Wydruk około 0,45 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
8
Polubienia
3
Ocena
0
P
PrintablesBenCh

Scroll Pump Exhaust Filter DN25

Container to hold HEPA filters and mount to exhaust (DN25) of scroll pump. Intended purpose was to capture scroll tip dust and reduce contamination of floor. Our system is UHV and noble gasses. Not advised for systems that have…

Wydruk około 3,16 €–3,86 € nettoWstępna wycena jednego wariantu

Pobrania
6
Polubienia
1
Ocena
0
P
Printableseds_3d_shop

Eds powerfull magnetic Bambu Lab X1 / P1S (full AMS Hub compatible!) Exhaust Fan Muffler / Fan Silencer without Supports/Bridges!

Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…

Pobrania
19 241
Polubienia
1519
Ocena
4,91
P
PrintablesDET-Man

CORE One Exhaust Fan Cover

There are so many design decisions I really like about the 🥰 CORE One. But when it comes to the exhaust fan grid, it's just on the edge to call it " functional" 😟. So I felt I needed to design a drop-in replacement to fix the things I did…

Pobrania
7257
Polubienia
191
Ocena
5
P
PrintablesB M A

*REALLY WORKS* Centauri Carbon Silencer Quiet DUAL Fan Shroud Muffled Intake Exhaust & Improves Internal Temps

All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…

Pobrania
5896
Polubienia
908
Ocena
4,94
P
PrintablesOurAngryBadger

Bambu X1 Exhaust Muffler / Fan Silencer

Bambu X1C Exhaust Muffler / Fan Silencer Work in process. Updates will be posted below. Features: Make the printer quieter by muffling the noise from the extremely loud rear exhaust fan. Using air baffle design, minimize noise while…

Pobrania
4908
Polubienia
1043
Ocena
4,71
P
PrintablesEIGA

FormD T1 Exhaust Shroud V2

If you intend to sell prints of this model, then please purchase a Commercial Use license version here . Main Features: - Improves thermals - Reduces fan turbulence by using circular cutouts for the fans - Easier fan mounting or swapping…

Pobrania
3521
Polubienia
152
Ocena
4,8
P
PrintablesMicro Center

JST-XH.2 Connector Depinner

JST-XH.2 Connector Depinner This allows the user to quickly and easily depin up to a 15 pin JST-XH.2 connector. This is a common need for anyone modifying or working on printers. Filament: Inland Lime-Magenta Silk PLA Slow speed 210C…

Pobrania
2549
Polubienia
831
Ocena
4,73
P
PrintablesLuboš Novák

Air conditioner exhaust into the ventilation window

Air conditioner exhaust into the ventilation window. Výdech klimatizace do okna ventilace. Category: Household

Pobrania
2047
Polubienia
314
Ocena
4,83
P
PrintablesfbeauKmi

Voron 2.4 Exhaust cover

Update 26/11/2024 : 5 new models. Add ECAS + left side bowden input Update 06/10/2024 : Add plain cover Update 08/28/2023 : Stiffer cover and fix issue below for panel < 3mm Yes, this is another backpanel cover for Voron 2.4 ! I designed…

Pobrania
2018
Polubienia
250
Ocena
4,93
P
PrintablesRick Tucker

Window Seal for 4-inch Exhaust Duct

The model uses interlocking boards and a vent. The interlock is an angled dove tail that will provide a very tight seal (more air tight than the typical window seal kit). The interlocks are modeled with no clearance. You will likely need…

Pobrania
1587
Polubienia
304
Ocena
5
P
PrintablesUncle Jessy

Bambu Lab A1 Bin - Death Star Thermal Exhaust Port Version

Help take down the empire with your new A1 3D Printer by flinging poo through the Death Star Thermal Exhaust Port opening! I modeled this in Shapr3D and there is a version without the exhaust port opening as well ;) Print in place, no…

Pobrania
1409
Polubienia
270
Ocena
5
P
PrintablesIndy Wijata

*Updated Wide Model* Detachable Velux Tilt Window Fume/AC/Printer Exhaust | 100mm/4 Inch Duct

Update August 2026 Finally put down the time to improve on this design. I managed to increase the output surface area keeping in mind of the restrictions of my current window. The slot is the same height but now 20 cm wide. Please double…

Pobrania
1392
Polubienia
535
Ocena
4
P
Printablesgrizzie17

60mm Exhaust Fan Silencer Flowmaster (PSU) Ender3/Neptune[2,3]/Others

Exhaust Fan Silencer that was inspired by the Flowmaster muffler design. I know that it looks kind of hokey, but it's hard to argue with the results. The folks at Flowmaster really know what they are doing with muffler design. This Fan…

Pobrania
1323
Polubienia
211
Ocena
4,92
P
PrintablesRezin Creative

Elegoo Saturn 4 Ultra Magnetic Exhaust System

I designed this system firstly for the obvious reason of keeping fumes out, secondly to easily switch the exhaust port for my airbrushing booth or printer, and to put a cover on when not in use (Helps with the air conditioning). I like to…

Pobrania
1296
Polubienia
180
Ocena
5
P
PrintablesEA3D

B2B JST XH CONNECTOR

B2B JST XH Straight Connector pitch 2.54mm 2/3/4/5/6/7/8/9/10/11/12 pin

Pobrania
1268
Polubienia
186
Ocena
0
P
PrintablesNamida Verasche

Printable XhuPont / XH2.54 / DuPont connectors (V2)

I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store NOTE: An issue has been identified with the…

Pobrania
1259
Polubienia
978
Ocena
5
P
Printablesstugpanzer

Creality K1 Exhaust Fan Filter Holder

This is a simple design to allow one to use Activated Carbon Filter material with the Creality K1 Printer. Just cut some Activated Carbon Filter Material to fit then press-fit on the enclosure exhaust fan. This is the material I used:…

Pobrania
1225
Polubienia
145
Ocena
5
P
Printablesdildesigns

Anbernic RG35XXH Detachable Comfort Grip

Print with the flat part of the grip on the print bed with supports. I used a threshold angle of 10 degrees with snug supports! Feel free to get this directly from me here: https://dildesigns3d.etsy.com

Pobrania
1219
Polubienia
115
Ocena
4,86
P
PrintablesNadir @ CN3D

Sovol SV08 Exhaust Filter

This is an original design made by Voron we just adapt it to the top hat that we made for the Sovol SV08 https://www.printables.com/model/865851-sovol-sv08-top-hat You need carbon fiber foam filter 5 pieces of 7mm x 65mm x 130mm You can…

Pobrania
1176
Polubienia
196
Ocena
4,83
P
PrintablesCoroleon

Crocs Car/Semi Truck Exhaust

DONT SELL WITHOUT MY CONSENT. Permission can be bought for $10 Hello! First of all, thank you so so much for looking at my design! I would really appreciate if you could leave a like. I got some new crocs and I wanted to create some…

Pobrania
1168
Polubienia
167
Ocena
5
P
Printablespavol.n

Exhaust manifold

Just slice and print. No supports needed.

Pobrania
1135
Polubienia
63
Ocena
5
P
PrintablesThomllama

Dewalt DW 735 Planer Angled Exhaust Port

Simple attachment for the Dewalt 735 to get a 4"/100mm hose up and out of the way of boards exiting the rear of the planer! Simply push in the button on the stock port, rotate and remove the original stock black port. Install this…

Pobrania
1134
Polubienia
135
Ocena
5
P
PrintablesHanzo 3d

exhibidor para llaveros

llavero armable multicapas solo tienes que hacer una base y unir mas soportes y hacerlo a la altura que desees u ocupes.

Pobrania
1095
Polubienia
55
Ocena
0
P
PrintablesWolfie3D

Bambu Labs X1C Exhuast Adapter

Bambu Lab X1C Exhuast Adapter for 75.5mm rubber cuff. Pictures show orange PLA at 0.28mm layerheigt (adaptive). Use a standard m3 thread tap to thread the three unoccupied holes with minimal damage (no drilling required). There is space…

Pobrania
1077
Polubienia
293
Ocena
4,75
P
Printablesppi7ihp

xTool window exhaust (or any other 3" hose application)

Background I recently got a xTool S1 laser machine and was looking for a solution to get rid of the exhaust gases to have the machine run in my flat. Idea I checked the most common resources on the web and found some window exhaust…

Pobrania
1029
Polubienia
139
Ocena
5
P

Bench Power Supply with ATX PSU (w/ XH-M229+SK35)

The model that brotherchris made with the XH-M229 switchboard was fine, but it didn't include an adjustable unit, so I modified the model a bit and integrated the SK35 (XYS3580 can also use) buck/boost converter case prepared by fjkraan…

Pobrania
996
Polubienia
108
Ocena
4,67
P
PrintablesTomasz

Air conditioner exhaust into the ventilation window for 100mm duct

I recommend checking out remixes made by @ Hanak1nSolo and @ fneb Both are great, and could be a better fit for your specific case! You can find them in Remixes tab window outlet size is 40mm x 200mm is has the same area as the input…

Pobrania
995
Polubienia
147
Ocena
5
P
PrintablesPat

Vauxhall camshaft locking tool

You need to print two as they fit back to back, to make it easier to install and remove I wet sanded the back half to remove any layer lines which could cause them to lock up. Lock the camshaft drive belt pulleys together when removing…

Pobrania
992
Polubienia
56
Ocena
5
P
PrintablesWolf_Prints

Centauri Carbon Exhaust Filter/Vent (2 in 1)

I remixed the model from Uncle Jessy. I wanted a solution to filter and/or vent the exhaust from the Elegoo Centauri Carbon. The exhaust attachment is compatible with a 4 inch dryer vent hose. Link to the HEPA filters -…

Pobrania
969
Polubienia
155
Ocena
5
P

QIDI Q1 Pro Internal Exhaust Duct

A 45mm or so long duct to connect the QIDI Q1 Pro's print chamber 60mm internal fan to the vent at the back to allow hot air to escape without heating up the electronics. The original idea was based on the model below, only as I have my…

Pobrania
951
Polubienia
142
Ocena
5
P
PrintablesZac Reinke

Mini Starship with Collapsible Exhaust Flame

I printed a couple of 3DPmom's Rockets for my girls and was truly inspired by them. They were so simple and fun to fidget with! But I wanted something a little more realistic, so I studied her design and built this minimalistic version of…

Pobrania
916
Polubienia
337
Ocena
5
P
PrintablesMr TVR

Creality K2 Plus waste poop chute, exhaust outlet vent and waste bin

This set provides a great way to remove waste poop and chamber emissions from your shiny new Creality K2 printer. The set includes the following models: The main single part “Y” piece which connects to the twin exhaust outlets using a…

Pobrania
880
Polubienia
132
Ocena
4,83
P
PrintablesSimon

Removable Exhaust Duct for Flashforge Adventurer 5m Pro

An exhaust duct for your Flashforge Adventurer 5m Pro to fit a 100mm / 4" hose. Three parts: Internal duct to prevent the printer from venting into the motherboard cavity. This has holes for 4 off 6mm diameter, 3 thick magnets, but really…

Pobrania
875
Polubienia
167
Ocena
4,5
P
PrintablesNyxCode

Voron 2.4 Umbilical Exhaust Cover

Update : Added INVERTED version, in which the CNLINKO LP-12 is mounted upside down. This makes removing it easier, since the previous version didn't leave much space between the clip on the connector and the frame. If you don't mind the…

Pobrania
861
Polubienia
172
Ocena
5
P
PrintablesScriding

Universal Exhaust Pipe Plug (No Supports)

I made this exhaust pipe plug to use when I wash my motorcycle. It will fit exhaust tips from 12mm to 38mm inner diameter. It's modeled to print without supports or brims on its side. The small flat section it sits on does not affect its…

Pobrania
835
Polubienia
69
Ocena
5
P
PrintablesBazl Tech

1.5" Exhaust Header Fabrication Kit

Each bend block is equivalent to a 22.5deg pc.. So 4 pcs will give you a perfect 90deg bend. They also have angle location marks/notches every 30 deg to help keep track of your compound bends, and make it easy to re assemble and mark once…

Pobrania
780
Polubienia
74
Ocena
0
P
PrintablesMarcel_Be

Elegoo Saturn 4 (ultra) exhaust adapter

An adapter to connect a hose to the printer to vent harmful fumes. There is space for a fan, which can be powered via the printer’s USB port. Four holes are provided for using M3 heat-set inserts to securely attach the adapter. The…

Pobrania
771
Polubienia
79
Ocena
5
P
PrintablesRePeteeMe

Respiration Mask with Filter and Exhalation Valve (Covid-19) WIP

Hi there I hope you are still healthy. Because of Covid-19 pandemic I developed this printable mask. You can print it without supports and it takes about 5 hours to print all parts if you print it with 0.2 layers and 0.6 nozzle. I used a…

Pobrania
768
Polubienia
5
Ocena
3
P
Printablesphilltran

Bambu Lab X1/C Exhaust Duct Adapter

Exhaust Duct Adapter that attaches to Bambu Lab X1/C 3D printer to secure four inch exhaust duct. There are holes that line up with the mystery holes in the back panel of the Bambu Lab X1/C printer. The holes on the printer are not…

Pobrania
758
Polubienia
105
Ocena
4,75
P
PrintablesZenfunk

Replacement Cover For Headlamp Washer Opel/ Vauxhall Astra H

I ran into some snow in winter and lost the right cover of my headlamp washer. There seem to be two versions of washer covers out there and when I ordered a replacement, I always got the wrong one. 3D printing to the rescue... It was…

Pobrania
756
Polubienia
54
Ocena
4,33
P
PrintablesDJ

Andromeda Ascendant in XXXL Format (LxHxW: 50x21x25cm) (Gene Roddenberry) with stand

I have revised the model of “morenostefanuto” to be 3D-printable. Need to mention that I am not a “Andromeda Fan” or “Trekki” but this Andromeda Ascendant model is really huge and looks really fantastic. The dimensions are: length: ca. 50…

Pobrania
744
Polubienia
56
Ocena
0
P
Printablestransammatt

LS Exhuast Port Cover Plate

Exhaust port blockoff plate for storage of your LS engine

Pobrania
743
Polubienia
62
Ocena
0
P

Bambu Lab Exhaust Fan Muffler V3

I liked the previous version, but most people dont have oddly sized magnets on hand. I created this one that uses two stacked 6x3mm magnets. Thats 6mm round and 3mm tall, stacked on top of each other. The hole id 6.5mm round and 6mm deep,…

Pobrania
716
Polubienia
99
Ocena
4,73
P
PrintablesCachai

6 inch to 4 inch exhaust hose reducer

I created a DIY airbrush spary booth using two Ikea Samla boxes and a bathroom fan as the exhaust. However, the output of the fan is to a 6 inch hose which did not fit my needs. Therefore I needed a way to reduce the connection size from…

Pobrania
716
Polubienia
47
Ocena
5
P
PrintablesAXUL

Enclosure for XH-M609 Low Voltage Disconnect 12V 24V 36V Over-Discharge Protect For 12-36V Lithium Battery

The enclosure consists of 2 parts: Top and Bottom. The XH-M609 board is placed first on the bottom case, to ensure centering, then the top part is seated over until there is no gap on the sides. The assembly is secured with 4 M3x12…

Pobrania
715
Polubienia
52
Ocena
5
P
PrintablesCoroleon

Crocs Muscle Car Motor and Exhaust

"Start yooooour engines: chuga chuga ChUgA POP VROOOOOOOOOOOOOOOOOOOM!" Hehe ;) oKAY sorry for getting distracted there XD. Thank you so much for looking at this. YOU ARE AWSOME! This bad boy is sicK with a capital K. I was going for the…

Pobrania
699
Polubienia
101
Ocena
4,5
P
PrintablesGunter

Mk4S heatbreak exhaust duct

Following the discussion here, https://forum.prusa3d.com/forum/english-forum-original-prusa-i3-mk4-general-discussion-announcements-and-releases/heatbreak-fan-might-be-causing-asa-abs-warping/ the heatbreak fan might be causing issues due…

Pobrania
688
Polubienia
242
Ocena
4,97
P
PrintablesNathan Nguyen

Elegoo Centauri Carbon Ventilation Exhaust Kit

This is an exhaust kit I designed for the Elegoo Centauri Carbon to exhaust any fumes out when printing parts like ASA, ABS, etc. Included is the following Printer to 4" Duct Adapter Printer Auxillary Exhaust Cover 4" Duct to Fan Adapter…

Pobrania
679
Polubienia
117
Ocena
5
P
Printableswbphelps

Yet another Bambu X1 exhaust fan muffler

I was intrigued by the various exhaust fan mufflers for the Bambu X1, and since I had just acquired Fusion 360, decided to create my own version as a way to get up to speed with F360. I wasn't really expecting to make a quieter version,…

Pobrania
678
Polubienia
148
Ocena
4,7
P
PrintablesPetclaud

Lack Enclosure 80mm Fan exhaust/vent and fan cover

Using Merkelerk's nice fan cover design ( https://www.thingiverse.com/thing:2755547 ), I made this exhaust pipe and modified the fan cover to mount a 80mm fan for an Ikea Lack enclosure. The exhaust is 0,5 mm higher than the thickness of…

Pobrania
674
Polubienia
72
Ocena
5
P
PrintablesReelClones

Creality K1 Max exhaust vent 4"

I needed a 4" extraction port for my K1 Max for printing in ABS, but the only one I could find required the use of TPU filament (which I don't have) as it needs to flex in order to fit. I remixed it to attach with some magnets I already…

Pobrania
670
Polubienia
100
Ocena
4
P
PrintablesIgor R.

Qidi Q1 Pro 100mm Exhaust System

I created this exhaust system for my own printer/window setup, but sharing it here if anyone needs something similar. Minimal supports required, all the STLs should be in the correct printing orientation and do not require supports,…

Pobrania
640
Polubienia
100
Ocena
5
P
PrintablesCestoMan

Safety AntiTheft Pad for Fiat, Citroen, Peugeot, RAM, Opel, Vauxhall, Zenith, Maxwell

I found serious security fault on vans and campervans, which can be found on all type series built from 2006 and on. In the past several years I had been employed as a chauffeur and a garage administrator in the caravan rental company,…

Pobrania
618
Polubienia
49
Ocena
5
P
PrintablesVelaptic

QIDI Q1 Pro Exhaust Duct and Fume Extraction Port With 90 Degree 3" Swivel Elbow

A print that improves heat management and ventilation on QIDI's Q1 Pro printer. An internal duct guides chamber exhaust out of the machine's back panel. Adding this duct has three benefits: * Your printer's power supply and main control…

Pobrania
617
Polubienia
101
Ocena
5
P
PrintablesKalleKnall

OPEL VAUXHALL Astra J OPC / VXR Key Button Inlay

After some Years, my OPC Key Buttons went away. To save the Key, i've desigend a new Inlay. Printed in TPU - works greate ! No clue needed ! DualColor MMU printable Print instructions I've printed the part on the textured Prusa Sheet to…

Pobrania
615
Polubienia
38
Ocena
5
P
PrintablesYeeve

120mm Computer Fan- 4in Duct Exhaust

Simple adapter to fan I modeled to fit 4 inch duct. End piece was modeled to fit and vent under a window. End piece can be skipped depending on your purpose.

Pobrania
613
Polubienia
83
Ocena
5
P
PrintablesMARC PRUDHOMME

Qidi Q1 Pro Exhaust Port Cover

Simple and quick exhaust port cover for the Qidi Q1 Pro. Use to mitigate heat loss and fumes exiting the printer. Works with existing screws, no additional hardware needed. Note: The back of the printer has large gaps exposing the…

Pobrania
611
Polubienia
82
Ocena
5
P
Printablesdildesigns

Anbernic RG35XXH Clip on Grip Case

Print this with the top side of the clip down. I printed with supports with a 10% support angle threshold. You shouldn't need a brim depending on your plate, but I printed previous versions with a brim just to be sure! Feel free to get…

Pobrania
606
Polubienia
69
Ocena
4,83
P
PrintablesCC3D Projects

Bambu X1 Exhaust Muffler or Fan Silencer - Magnetic

Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…

Pobrania
604
Polubienia
115
Ocena
5
P
PrintablesLoogle

Voron 2.4 Umbilical Exhaust Grill for PUG

Description: Use the excellent Parametric Umbilical Gland (PUG) , instead of a PG7 or similar, to secure your Voron umbilical through the exhaust grill. It also provides a location for the reverse bowden tube. You can use the Parametric…

Pobrania
604
Polubienia
91
Ocena
5
P
Printables365lyf

NZXT H1 Triple & Dual 40mm Exhaust Fans Shrouds

As printed by hundreds of H1 owners on Reddit, I present the: Triple & Dual 40mm Exhaust Fan Shrouds for NZXT H1 Case - Version 4.0 Benefits: Typically a 6 degree Celsius drop on RTX series GPUS with three fan version Additional 2-6…

Pobrania
602
Polubienia
51
Ocena
4
P
PrintablesBC Designs

BentoBox 2x5015 bottom exhaust

Update 24/12/2022: Bottom exhaust uploaded was incorrect and didn't include the bottom L shape cut-out. This has been corrected in the latest version (v2). Description / Changes A modified version of RISCie's BentoBox 5015x2 Fan blower…

Pobrania
601
Polubienia
159
Ocena
5
P
PrintablesFilamentos

Window Exhaust Hose Adapter, AC 150 mm

This window exhaust hose adapter is for a 150 mm PP hose (150mm PVC should be good), and I tried it with PETG and a 0.6 mm nozzle. The extra adapter bits are supposed to be a little loose, so you'll need some glue. You can switch the…

Pobrania
587
Polubienia
60
Ocena
5
P
PrintablesCybuster

3in air duct basement window exhaust

Print with any material you would like. No support required. Please see image as reference for suggested orientation for printing.

Pobrania
586
Polubienia
89
Ocena
5
P
PrintablesDave D

K1C Exhaust Duct Fittings

END FITTINGS This set of models includes 5 part files for various scenarios of venting your Creality K1/K1C exhaust outside. It's especially good for when printing fumey filaments like ASA or ABS where that half-filled OEM carbon “filter”…

Pobrania
576
Polubienia
51
Ocena
1
P
PrintablesKen226

Voron 2.4 Exhaust Housing, Side Tube Entry.

I kept having issues with the amount of force needed to move the filament through the PTFE tube. The only way to get it to feed freely was to keep the tube's loop, behind the printer, overly large. This version of the exhaust housing lets…

Pobrania
574
Polubienia
90
Ocena
4,4
P
Printablescornflake

Under-door Exhaust Duct

I run a couple of FDM and SLA printers in a closet in my house. I wanted a way to exhaust toxic/smelly fumes out of this enclosed space without having to permanently modify walls or doors. This allows me to vent fumes out of a nearby…

Pobrania
570
Polubienia
46
Ocena
0
P
PrintablesJTEE3D

Anbernic RG35XXH Grip

In collaboration with HyperPlay RPG , I have designed a grip for the RG35XX H games console. Print with supports 15% infill 0.2 mm layer height See HyperPlay RGP's review of the grip here: I also sell this on my website and Etsy store ,…

Pobrania
564
Polubienia
66
Ocena
5
P
PrintablesSilvan Pierce

Dirtbike / quad Exhaust Plug

This is a exhaust plug for a dirt bike or quad, designed so no supports are needed. this should work for both 2 strokes and 4 strokes, but if you are worried just scale it up or down to your liking. 10% gyroid infill seems to give it a…

Pobrania
554
Polubienia
66
Ocena
5
P
PrintablesRobert G

Bambu Lab H2 Series 4-Inch Exhaust Duct Adapter (H2D / H2S / H2C)

Bambu Lab H2 Series 4-Inch Exhaust Duct Adapter (H2D / H2S / H2C) This model is a custom exhaust adapter designed specifically for the Bambu Lab H2 series (H2D, H2S, and H2C). It allows you to connect the printer’s exhaust port directly…

Pobrania
548
Polubienia
62
Ocena
5
P
PrintablesMichal

Voron 2.4 Exhaust cover with Umbilical (PG7)

Back cover for Voron with support for PG7

Pobrania
547
Polubienia
59
Ocena
0
P
Printablescolossatr0n

5.9 Inch Air Conditioner Exhaust Hose Wall Adapter

This is a wall mount collar that fits a 5.9 inch exhaust hose for a portable air conditioning unit. The base was designed to cover a 6.38 in (162 mm) diameter hole drilled in drywall. Most can-light hole saws are about this size. The…

Pobrania
546
Polubienia
45
Ocena
5
P
PrintablesMobious

Exhaust Fan Housing for Lack Enclosure (120mm + Speed Control)

After completing my Lack Enclosure, the next step was to add an exhaust system, but the last thing I wanted to do was cut a big hole in my acrylic side panels. My solution? Cut a hole in the table surface instead! No hole saw or CNC…

Pobrania
539
Polubienia
212
Ocena
5

Voron V2 Exhaust Fan Grill with Bowden/PG7/Thermistor

A remix of my solid plate , for those who want to keep the rear exhaust housing in place. STEP file provided if you want to make any changes.

Pobrania
537
Polubienia
65
Ocena
4,33
P
PrintablesRazerOfPain

Creality K1 Exhaust Fan Carbon Filter Adapter

Designed to address the issue of ABS fume during 3D printing. ABS is a commonly used filament in 3D printing but can produce strong and potentially harmful fumes when heated. To ensure a safer and healthier printing environment, the…

Pobrania
535
Polubienia
42
Ocena
4
P
PrintablesFunFunBoy

Exhaust grill cover for Voron 2.4

I've replaced the stock Voron exhaust fan with the Nevermore micro so this is a cover plate.

Pobrania
535
Polubienia
36
Ocena
5
P
PrintablesBerkhanB

JST XH 2 pin female connector

I just make the original 2_pin connector pin entry larger and added chamfer because metal part wouldn't enter the original design. Now it works like a charm. Print Settings Printer: AM8 Rafts: No Supports: No Resolution: 0.12 Infill:…

Pobrania
534
Polubienia
53
Ocena
4,67
P
PrintablesCrosslink

K1 Exhaust Fan Adapter for LV-H128-RF Filter Adapter

Print with 3 perimeters for stability Use 4x M3 Threaded inserts, outer diameter 5mm, length 4mm: https://s.click.aliexpress.com/e/_DmG9Lyz

Pobrania
534
Polubienia
27
Ocena
4,67
P
Printables3DRA

Creality K1 MAX exhaust with clip mount

Exhaust for Creality K1 MAX with clip mounts. For pipe with a diameter of 90 mm and 100 mm. I printed with PLA, with outer and inner brim and without support.

Pobrania
530
Polubienia
51
Ocena
5
P
Printablesmrgnarvar

Centauri Carbon Filter and Exhaust Vent Combo

Update: Made a version with a swept pipe and lip. Created a mounting bracket for the CC filters that has a 90 degree bend for connecting a 4" dryer hose for ventilation. I modified the case to load from the top, making it easier to access…

Pobrania
525
Polubienia
65
Ocena
0