P
PrintablesGermanDarknes
10x USB Stick Holder
Holds up to 10 USB Sticks/Dongles with extra tray for caps.
Wydruk około 3,68 €–4,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 868
- Polubienia
- 87
- Ocena
- 4,81
Wyniki wyszukiwania: 10x
Liczymy pasujące modele…
P
PrintablesMaximus Overnight
Mosquito Net Magnets for 10x3mm magnets
Mosquito Net Magnets. Magnets size: D: 10mm, H:3mm As the original, magnets are pressed into the holes and locket with glue(but personally, I use them without glue). The Windowmagnet can be glued on a strong adhesive tape, which is then…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 16
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTaubin
Rivet Extraction Tool with 10x2 Magnet
I added a cutout on the back for a 10mm x 2mm circular magnet.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 5
P
PrintablesTwoBlackArts
PS4/PS5 Simple Case Holders (lengthwise version) 10x | 12x | 14x
This is a remixed version of the original simple & lightweight design with primary focus to minimize print time & material consumption through optimized geometry. It's a longer variant that allows for lengthwise storage and is more…
- Pobrania
- 135
- Polubienia
- 26
- Ocena
- 0
P
PrintablesAstolfo_ROB
flat head ball shift knob m10x1.25
my 3rd design of a shift knob. due to difficulties on fusion as i'm still learning i rendered it as an OBJ file instead of the common STL file.
- Pobrania
- 126
- Polubienia
- 6
- Ocena
- 0
P
Printablesroman_hegglin
Braille: multiplication table 10x10
Customized version of http://www.thingiverse.com/thing:160323 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=160323 Instructions Using the following options: font_height = 8 font = write/braille.dxf…
- Pobrania
- 111
- Polubienia
- 7
- Ocena
- 5
P
PrintablesChris Mayhew
Makerbeam Compatible 10x10 Right Angle Bracket
So I was ordering some Makerbeam 10x10mm frame but they had no right angle brackets in stock at the time of ordering and I couldn't wait for them to come back in stock so I decided to just 3D Print some. These will fit 10x10mm Makerbeam.…
- Pobrania
- 99
- Polubienia
- 13
- Ocena
- 5
P
PrintablesLaird Popkin
10x10 multiplication table
Customized version of http://www.thingiverse.com/thing:137543 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=137543 Instructions Using the following options: factor_height = 0.3 font = write/orbitron.dxf…
- Pobrania
- 85
- Polubienia
- 3
- Ocena
- 5
P
Printablesroman_hegglin
My Customized multiplication table (10x10)
Customized version of http://www.thingiverse.com/thing:137543 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=137543 Instructions Using the following options: factors_y = 10 factors_x = 10 Category: Math
- Pobrania
- 74
- Polubienia
- 21
- Ocena
- 5
P
Printablesebov
10x10x2 Junk Drawer Organizer
Fills out a 256mmx256mm print bed. Nice and sturday and designed to fit a 10 inch drawer snugly. Do your own measurements beforehand and scale height as needed!
- Pobrania
- 62
- Polubienia
- 16
- Ocena
- 0
P
PrintablesD'Van Howard
Pixel Watch 2 & 3 charger w/ cable winder and plug mount (USB-C & USB-A) with 10x3 mm magnet holes
Remix of the charger cable winder with extrusion added to glue in two 10mm x 3mm magnets. Prints exactly like the remix I'm adding two versions, the one I printed in the pictures and a second version I shortened by 4mm
- Pobrania
- 49
- Polubienia
- 7
- Ocena
- 0
P
PrintablesGreg
Rivet 10x6mm
The model is a replica of an original in-molded one (The white one on the picture which belonged to a prism set for bike wheels) So primarily this is for mounting a prism to spokes. A 2mm wide spoke can fit between the legs of the rivet…
- Pobrania
- 38
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMgr. Pavel Krist
lego technics brick 10x2
lego technics brick 10x2
- Pobrania
- 33
- Polubienia
- 7
- Ocena
- 0
P
PrintablesGreeniac1
210x210 Test
a KP3S Pro/S1 can print at 210x210 with a 210x210 PEI Build plate (or any magnetic build plate), so i made this model to test if you can.
- Pobrania
- 21
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBenksterini
Neopixel Matrix 10x12
I wanted to have a Neopixel Matrix i can use as a 12 channel spectrum analyzer. But it can be used for pretty much anything else. The nexopixels are driven by a Raspi Zero 2 in this example but the matrix is generic - just 3 pins →…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
Printables
Stackable Drying Box 110x110x40mm 110x220x40mm Honeycomb Style
Stackable Drying Box 110x110x40mm 110x220x40mm Honeycomb Style Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this…
P
Printables
Paint Spray hexagon cammo stencil 10x10 cm
Paint Spray hexagon stencil 10x10 cm for example to painting guns or accessory Print settings Layer 0,2 4 walls 15% infill no supports
P
Printables
Drag Chain End 10x11 remixed
Original model was close to fit my cable chain but needed a few tweaks.
P
Printables
photo frame 10x15 cm
Since I liked the smaller model so much, I decided to recreate an identical but larger version, for 10x15 cm photos. You can find the smaller version with printing instructions here:…
P
Printables
Prusa Core One Side Storage MOD for Larger 20x10x5mm Magnets
Refer to the original post for further model details.
P
Printables
Solar panel 110x60
Support for a small 110x60mm solar panel. On the 3mf, the print speed is set to 0.08mm and the medium speed for fast printers. I've gotten good results printing at 350mm and 0.16mm layer thickness (if you want to save time) or with…
P
Printables
Turkish Electricity Car: TOGG T10X Desktop Model
Most waited Turkish electricity car TOGG T10X Desktop Model is finally with you ! -It is 15 cm model of the car. All parts fit the car well. -Combine parts with glue or similar adhesives. -Car body and stand need supports ! -Wheel spacers…
P
Printables
10X28mm, Recessed Spring Latch Modular Ammo Box
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
P
Printables
Photo frame VII - 10x15 (4"x 6")
Photo frame VII 10x15 (4"x 6") in filmstrip design. Easy placement of photos using the side hole. Printing without supports. No gluing, just connect the two parts using the holes. Another frame here:…
P
Printables
Olympus WK 10x/20L Eye Cup w/ Dust Cap
Eyecup and accompanying dust cap for the Olympus BTHU2 eyepieces (Olympus WK 10x/20L). I used 95A TPU and it works fairly well. Probably would be nicer in a less stiff and matte textured material. The dust cap fits securely, but is still…
P
Printables
Decora Style Magnetic Light Switch Cover Switchplate (10x3mm Magents)
TIRED OF THROWING A PARTY AND SOME JABRONI TURNS OFF THE LIGHT SWITCH THAT POWERS YOUR SMART SWITCH BECAUSE YOUR RENTAL WAS BUILT IN 1875 AND HASN'T BEEN UPGRADED SO YOU DON'T HAVE OVERHEAD LIGHTS? AND YOUR LANDLORD HAS THE AUDACITY TO…
P
Printables
CİGAR ASHTRAY 10X10
i made a mini version like 5x5 but i recomended full size and 20% or 30% fill density.
P
Printables
Lego Treasure Map Tile - 10x size (1/4)
UPDATE: I also included a version with an X instead of a Gorilla.. So the map of 4 actually leads somewhere! Enlarged version of this brick (6480850):…
P
Printables
XT60 Splitter 10x for DIN-RAIL
Power supply splitter XT60 x10 for Camera and DVR with voltage and current panelmeter ...
P
Printables
Polydryer Hanger for Core One - ?x10x5 magnets
This is the best holder I've found for hanging a Polydryer box off my Core One. I made a few changes to Narcorex's model to make it fit my magnets and print faster (see differences section). When printing, be careful since the model is…
P
Printables
Gridfinity 5x2 bin 10x divider add-on for cases
This model simply prevents the contents of bins from mixing together. Specifically for 5x2 Gridfinity bins with 10x2 separate internal bins with labels and used within the Modern Case. I've only tested it with the snap in version of the…
P
Printables
Cleaner Holder with hook and 10x3 mm magnets
This remix uses 10 10mmx3mm magnets but works perfectly fine with less. Printed with PETG but PLA should also be fine. Added a small hook to stabilise position Increase the magnet size to 10mm x 3mm round magnets Increased the width in…
P
Printables
Modular airgun moderator/silencer for m10x1 thread.
Fully 3D printed airgun moderator/silencer designed for a Diana Chaser, but fits other M10x1 threaded air guns. The end cap can be easily removed by finger friction, in case it gets too tight the included wrench makes it easy to remove.…
P
Printables
Photo frame "Moments of love" – format 10x13cm
❤ Cadre Photo "Instants d'Amour" – Format 10x13cm Célébrez vos plus beaux souvenirs avec élégance grâce à ce cadre photo spécialement conçu pour la Saint-Valentin et les occasions romantiques. Son design délicat et chaleureux en fait…
P
Printables
10x5cm Side Vent Grill for Optiplex GPU mod
When modding Dell Optiplex 7020, there is not enough clearance to "bend" PCIE cables with larger GPUs. This mod provides 10mm extra clearance and little extra ventilation for fitting larger GPUs into an Optiplex. Comes with two parts, the…
P
Printables
Skadis magnet halter 10x2mm
ganz einfache halterung zum einfügen von 2 magneten mit den maßen 10x2mm
P
Printables
2 Part Magnet Pin for 10x2mm Magnet
Simple magnetic pin made of two parts. Insert magnet and glue together. 2 part design prevents magnet from scratching sensitive finishes. Bottom is .2mm thick. Thus, print the bottom layer .2mm thick. I printed the rest with a height of…
P
Printables
10x magnifying loupe
After making the universal wide angle viewfinder v2 you will be left with a single convex lens. This lens in its original housing can be used to make a convenient magnifying loupe to use for examining negatives or focusing on a ground…
P
Printables
Sleeve for CR2032 10x1 box - REMIX
10x1 coin cell battery case remix. you need to download the inner part from the original model . Download " CR2032_10_1_Crate.stl".
P
Printables
Cut-and-Tuck Photo Album Stencil (10x15cm)
I bought a photo album and didn't have enough corners... this is the solution! Did you ever forget to buy photo corners? Or can you just not be bothered to stick them all on? Maybe you thought you bought a photo album with pockets, but…
P
Printables
Amscope Eyepiece collar for WF10X/20
This is a remake of the little rubber collar that fits around a Amscope eyepiece. I'm not even sure what they are called but they need to be the in order for the eyecups to fit properly. The microscope in the picture is a AmScope 7X-45X…
P
Printables
Mirror Mount Holder for Beeline Moto II - M10x1,25 (Husqvarna Vitpilen 401)
This mount is designed to attach a Beeline Moto II using the original Beeline Moto Mount Adapter . The holder was specifically designed for my Husqvarna Vitpilen 401 . It screws directly into the left factory mirror mount on the…
P
Printables
For 10x2mm magnet, 2020 extrusion rail mount
I have different magnets so I made a new one. Solidworks file included.
P
Printables
10x2 Magnet Remix - Zipper Pull - Pac Man Series (Ghost)
Magnet recess resized to 6×2 mm. Print settings/orientation identical to original. Requires: 4× 6×2 mm neodymium magnets
P
Printables
Footrest / Stand - 310x250mm (Printed on Small Printers)
Originally designed as a footrest but came out pretty great for an angled stand as well. I have uploaded the step files as well for anyone interested in designing bigger version or attachments. There are 2 versions included, one with full…
P
Printables
Stylish frame for Orange wifi repeater (for 10x13cm photos)
Stylish frame for Orange wifi repeater designed to hold 10x13cm photos. Print: 1x StylizedFrame on the flat side (no support required) 1x BasePlate on the flat side (no support required) 4x Dowel (use brims) Place the photo behind the…
P
Printables
Storage box holder for 10x 2,5" HDD drive
Hello, Sharing my project of storage box for 10x 2,5" HDD drives. It's made to fit the standard 7mm thick hard drives (100x70x7mm) - it won't fit thicker versions. 🚀 Want to sell prints of my models? Subscribe to my Patreon for only…
P
Printables
Gridfinity Base Plates Pack 1x1 to 10x10 – Standard 42mm Modular System
📦 Complete Gridfinity Base Plate Pack This pack includes a full set of Gridfinity base plates from 1x1 to 1x10 , designed according to the official 42mm unit standard . Perfect for: drawer organization workshop setups storage optimization…
P
Printables
Tools Caddy for Magnets 10x3mm
Voici ma version du support a outils, que l'utilise pour ma CC2, Les aimants permette de la fixé sur la plaque gauche Imprimé en PETG couche de 0.2mm, Activé les supports Sur ce support j'accroche: Les 2 tournes vis fournie avec…
P
Printables
Angle Joints for 10x20 mm Cable Ducts
For Cable Ducts 10 x 20 mm with or without self-adhesive tape. Use some contact glue to attach the Angle Joints to the Cable Ducts.
P
Printables
Winnie the Pooh Kitchen Magnet 10x2mm
Have fun and please share your comments and models. Happy printing...
P
Printables
Ikea Lack Plexiglass Door Handles 20x10x2 magnet
Redesigned from start the door handles so they look similar but fit magnets in a way the magnets are merely inserted into the parts, no need to glue or tape them. Also I bought wrong size magnets so I had to improvise.
P
Printables
Washer Door latch Striker WH10X10004
Washing machine door latch part number WH10X10004, 131763302 or 131763310. Fits GE, Frigidaire and probably more.
P
Printables
Santas Little Helper - The Simpsons - Kitchen Magnet 10x2mm
Have fun and enjoy, and please share your comments and models... Happy printing...
P
Printables
Remix: Nokia ONT XS-010X-Q 19-inch Modular Rack Mount - includes mounting option
Modified @memch_2304707 modification of @mauker modular to add: Side mounting so you can attach to other modules Cutout for indication lights on the ONT (optional) Cutout hole for ONT power cord Uses the same backplate from the original…
P
Printables
Print-in-Place KnitFrame 10x15
Print-in-Place KnitFrame 10x15: Cozy Knitting Texture & Flat-Fold Stand Style meets smart engineering! This 10x15 photo frame features a clever print-in-place design that allows the kickstand to fold completely flush with the back. When…
P
Printables
Powerbank 3x65W 10x21700 21v 195w total output
Cell welder, solderer, glue and 3mm wooden screws are required. I added switches couse charging modules consumes a bit power from batttery while standby. Back female port is for charging. I use charger for gisam tools. For one battery…
P
Printables
Display stand for KAWS Monster Cereals figures with 47x10x3mm bases
A simple stand to hold (press-fit) and display these 2022 General Mills Monster Cereals figures designed by pop artist KAWS. Holes for bases are 47x10x3mm. If you want a label or inlaid text on the base (as in the photos), use PrusaSlicer…
P
Printables
LEGO cup - 10x upscaled
Copy of Lego cup (Item No: 3899 ) based on my own measurements. Best use as pencil holder (note: it cannot hold water). Be careful if you want to scale down the model. The tolerances for the couplings may be too small. Assembly video…
P
Printables
Cable chain R28 10x20mm
Compatible with the following cable chain as it can be seen in the pictures: https://www.amazon.de/-/en/TXErfolg-Quality-Carrier-Printer-Adjustable/dp/B087R9LCH3 Specifications: Inner hole size: 10 x 20 mm (0.39 inches x 0.79 inches…
P
Printables
Chainmail with & without plate (5x5,10x10&20x20) / Cotte de mailles avec et sans plaque (5x5,10x10&20x20)
ENG: Chainmail :5x5, 10x10 and 20x20 mesh versions. With or without plate. No support, print plates downwards. FR: Cotte de mailles : versions 5x5, 10x10 et 20x20. Avec ou sans plaque. Sans support, plaques d'impression vers le bas.
P
Printables
Magnetic 10x USB Holder
I designed a USB holder that accommodates 10 USBs, featuring a magnetic backside to tidy up my USB clutter. The backside includes 5 gaps for magnets, and for my needs, the two at the top and one at the bottom are sufficient. However, if…
P
Printables
10x37mm Prop
A big 10x37mm bullet inside of an even bigger 18x72mm casing. Kinda useless, since the primer's already been struck, and there's not single gun chambered in this. Not made for multicolor printing, but feel free to try.
P
Printables
simple 10x10cm 3x3 square board game board
square board game is a compact square board measuring 10x10 centimeters and divided into a grid of 3x3 squares. It does not include any game pieces and serves as a versatile platform for creating and playing various games or puzzles
P
Printables
Kreg K5 Organizer Magnetic Remix for 10x2mm magnets
The same model but adapted to fit 10x2mm magnets instead. Also added the baseplate for all the files
P
Printables
10x5 Holds Sample pack
This a 48 sample pack of approximately 10x5 cm climbing holds with their molds generated by BH Toolset, an open source Houdini project. https://github.com/JeremSparte/BHToolset Category: Sport & Outdoors
P
Printables
Ventilation Grille - Duct Cover 105x105mm / 105x210mm / 210x210mm / 210x105mm / Ø105mm - Griglia ventilazione a bocca di lupo
Ventilation Grille - Duct Cover - Griglia ventilazione a bocca di lupo Dimensional measures: 105x105mm 105x210mm 210x210mm 210x105mm Ø105mm Resize to adjust dimension All our designs are free to download and use. Your support fuels our…
P
Printables
Circular angled holder stand for 10x Rotring fineliner pens (0.4mm)
I got a pack of 10 colourful fine-liners recently and didn't find any existing models for this specific pen brand, so decided to measure them and throw something together in a form of a circle and at an angle similar to what's been done…
P
Printables
10x10 Board Game Challenge
The size of the board is 210x120.3x7.6mm. I don't like dry-erase markers for this purpose (I find them messy). So I designed this challenge to only use a mere sheet of 110x70mm paper. The sheet is held tightly between the removable…
P
Printables
M10 CSK Socket Head Screw Collection M10x12-M10x100 ISO 10642 / DIN 7991
Collection of screws (ISO 10642 / DIN 7991) including : M10x 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher…
P
Printables
M14 CSK Socket Head Screw Collection M14x16-M10x100 ISO 10642 / DIN 7991
Collection of screws (ISO 10642 / DIN 7991) including : M14x 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher…
P
Printables
Lamp Switch Nut - M10x1.0
This is a replacement for the nut on top of desk lamps common in Europe. It uses a metric M10x1.0 thread for the shank of the switch. After 30+ years of use, these nuts are commonly worn down on otherwise completely functional desk lamps.…
P
Printables
Shift Boot retainer for M10x1.25 Mazda Bongo
This is for the Mazda Bongo, but will fit anything M10x1.25 The Mazda has to have a removable boot - this will fit the existing retaining ring if you replace the knob with an 8 ball or whatever :)
P
Printables
M10 Set Screw Collection M10x10-M10x70 ISO 4029 / DIN 916
Collection of set screws (ISO 4028 / DIN 916) including : M10x 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit…
P
Printables
XT60 cap organizer 10x3
I just needed a 10x3 for my XT60 covers so I used the parametric onshape file to make it.
P
Printables
Gridfinity Penny Holder (10x)
I was very happy with codysechelski 's design, but as an avid collector of US cents, I wanted another that featured as many penny slots as I could fit to separate different varieties. I simply made a mold of the penny slot and crammed a…
P
Printables
Easy 13/Lucky 13 Posable feet with magnet hole 10x4x2
Tested with easy 13 Uses the same connector (I tried the easy 13 one) and toe I used these feet rather than the original because the original isn't quite big enough to add the magnets to while keeping the connector unchanged Don't need…
P
Printables
Lithophane Bilderrahmen 10x15 cm mit Aufsteller
Lithophane drucken Für die Erstellung des Lithophanes habe ich ein Bild in Graustufen umgwandelt (optional, muss nicht zwingend gemacht werden) und mit Hilfe von Itslitho.com in ein STL zum Drucken heruntergeladen. Das Lithohphane ist…
P
Printables
Xbox Simple Case Holders (lengthwise version) 10x | 12x | 14x
This is a remixed version of the original simple & lightweight design with primary focus to minimize print time & material consumption through optimized geometry. The width of each slot has been reduced by approx. 2 mm for the slightly…
P
Printables
Parkside Box 110x110x20
Questa scatola porta minuterie, ispirata al rinomato marchio Parkside, è stata realizzata con cura mediante stampa 3D, garantendo un design robusto e funzionale. Ideale per organizzare viti, bulloni, chiodi e piccoli attrezzi, la scatola…
P
Printables
Fidget spinner shiftknob (M12x1.25, M10x1.25)
Shiftknob I modeled which can take a 608zz bearing, just print this and whatever matching fidget spinner you can find (I used this one: https://www.printables.com/model/346220-fidget-spinner ) that takes a 608zz bearing and you're good to…
P
Printables
M10x1.5 ISO Metric profile / 10mm nut and bolts
after downloading lots of nuts and bolts in "ISO Metric profile" and not finding any that fits after print I decided to make my own set from scratch and her is the result for 10mm (M10x1.5 ISO Metric profile) / 15mm spanner
P
Printables
Abaco 10x10
Ávaco facil de imprimir Piezas Patas: El ábaco debe de tener 2 patas principales Soportes: Hay dos soportes para cada pata. Bolas: Tendrás que imprimir unas 102 bolas, si puedes usa diferentes filamentos para que quede mas colorido y usar…
P
Printables
TPU base plate for double 10x2 magnets - for "Soldering aid" or "Soldering station"
The TPU base plate model used for MW's Soldering Aid - clamp with magnetic base and Soldering Station / Magnetic PCB Holder fits a single 8x3mm magnet. This remix uses two 10x2mm magnets which have a bit more magnetic force, which feels…
P
Printables
Zulu 5 (10x42mm) Binocular ARD Killflash Cap and Collar System
Sig Sauer Zulu 5 (10x42mm) Binocular: Anti Reflection Device (ARD) aka Killflash, Binocular Cap and Shock Collar System
P
Printables
10x TSOP-50 Chip Storage Card
Here is a TSOP-50 chip holder since I have 10 loose ones and they were shipped taped to a piece of cardboard box. Windows were carved so you can easily see the markings on the chips from both top and bottom. Channels were carved between…
P
Printables
Magnetic Cable Management Clips for 10x3mm magnets
Found @Edward's model for 10x3mm magnets, but the needed to redesign for spouse-factor. STLs provided for a few cable-bundle sizes. In theory, no support is needed – the magnet hole depths have a 0.3mm tolerance to allow for…
P
Printables
shelf support 110x110 mm and 160x160 mm for conical screw
Shelf support 110x110mm and 160x160 mm.I made in double size both of them,printed in PLA or PETG,no support,infill 20%