Liczymy pasujące modele…
This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is compatible with the lego system.
Beautiful flower vase with a twist. It is for decorative purposes. It is 165mm tall and 119mm wide. Print time approximately 2 hours 20 min. Print instructions Nozzle size: 0.4 mm 0.2mm layer height 0.8mm wall line width / extrusion width…
The rear speakers were blown in my car. They're an odd size, and not easy to directly replace. I found there's a bracket, SAK-1203 to mount 5.25" speakers in the rear without modifying the car. Those adapters aren't easily available in…
This is a Wallmount for the LEGO Concorde. Screw holes are 4.5mm diameter. Nothing else needed to mount. Around 15% infill is enough.
a replacement part i modeled. A piece broke for the tower bridge
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Print from PETG, ABS or other heat resistant material. For this piece use clear see through filament because of the LED. Original switch part number: 61318365300.
Lego Concorde 10318 wall mount I only put 2 screws in main support no fixation needed for le head support
Pièce développée spécifiquement pour l’admission d’air de la BMW E36 318IS. Son design sur mesure permet d’optimiser le flux d’air tout en respectant les contraintes d’encombrement du compartiment moteur. Elle est imprimée en 3D en ASA,…
Mercedes Sprinter 318, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
I misplaced the blade fastening screw for my Chef's Choice 615 Electric Meat Slicer. I made a replacement part to match based on measurements (I did not have the original part to compare to). So this is not a 100% exact match but it…
I bought Some Dell monitors and used them for some time. Eventually I got a mount, so I could have a 4 monitor setup. These didn't have VESA mounts, so I was looking at replacing all my monitors. I decided to model an adapter to fit on my…
The Airbus A318 is the smallest member of the Airbus A320 family, designed for short to medium-haul routes. It first entered service in 2003 and seats between 107 and 132 passengers, depending on the seating configuration. With its…
This is a chain which is part of the container from the 3318 playmobil container truck. There are three different parts. After assambly I melted the chain links so they cannot open anymore. The ready to use Gcodes are for Prusa MK2.5s.
This cable holder replaces the BMW OEM clip 33 18 1 181 218 (33181181218). It routes and secures wiring on the suspension—typically the brake pad wear sensor at the rear, and in some models also ABS/signal wires—so cables don’t chafe or…
Vesa mount adapter for use with Dell s2318 monitors. Could work with other s2x monitors that use the aluminum stand.
This is a din rail mount for MAX31865 breakout boards. You will need the Voron din rail clip as well, it can be found here: https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl Print both files and…
This is a remix that adds some more geometry to make the chain less fragile, as otherwise it might break relatively easy when printing with PLA and in heavy duty use with small kids ;)
Designed this to hold my Bondhus hex drive set ( Amazon ). Will probably work with other sets, but have not tried them. Print the Hex Drive Storage file and Mount. The mount uses m3 inserts. Connect the two parts with 3 m3 x 10mm screws.…
I made this design for a project in which i needed to join an ESP32 and a MAX31865 in an electrical box. Simply slip into the holders the ESP32 and screw the MAX31865 on top with two little screws
E30 (and many other chassis) plastic grommet used in the front grill installation and rear license plate.
Layer 0,16 - with support. My first test print is from PLA, second from CPE HG100
The one fault with the Ozito Steel Deck lawn mower is that the blades are too high into the unit - meaning you can easily ground out the mower on the edges of the deck. This adapter brings the blades a few mm closer to the ground. Print…
Use PETG at minimum 80%
This is a simple door shelf divider for a Whirlpool WRT318FZDM fridge. It has a clip-on design and comes in two sizes (112x35mm and 112x50mm). Printing instructions Choose the size you'd like Print as-oriented in the .stl file (writing…
Tool for rubber instalation which is holding passenger oxygen panel and light tube panel. Tool is very usefull for line maintenance as smaller tool than pizza roller. Tool is NOT certified by EASA or any other agency.
A chuck key holder with a magnet for the Milescraft 1318 DrillMate. The magnet holds the key securely, even when upside down. What you will need: A 5x5mm cylindrical magnet (5mm height and 5mm diameter) CA glue (super glue) Printing:…
I recently bought a Milescraft 1318 DrillMate Portable Drill Guide to help in drilling holes perpendicular to some of my projects. It's a nice little tool, but I was quickly frustrated that there was no obvious place to store the chuck…
lego 30134 40243 4175 3633 3185 3224 30056 19121 41823 33303 32932
This is a part of the stamp from the 3318 playmobil container truck. I printed this and it was snapfit. Print instructions 2 perimeters
NOTE: Print tilted at 45 degrees angled up off the build plate to provide enough structural support for both the clips and center post. This piece is held into the decorative knob shell with 4 Phillips screws. Simply unscrew the old…
This model is compatible with the lego system.
Heat set inserts are now installed from behind the plate. Additionally there's “_short_offset” file, I noticed that the rear holes were not aligning with my micron carriage, so I moved the holes 1.5mm up to better align.
This model is compatible with the lego system.
TL;DR Freecad exercise learning by doing, copy the model with your favoured CAD programm. Collection exercise, CAD Motivation Saw a similar model in the contest #62 and wonder how to do that in freecad with a lesser amount of data. (257…
This model is compatible with the lego system.
Needed a simple snap together case for a thermocouple breakout board for my kiln. Printed in ABS.
This is a mount for an Adafruit MAX31865 board, which is used to drive PT1000 and PT100 sensors with a MAX31865 over SPI. This DIN mount is styled like other DIN mounts for the Ender 3 NG v.2. Works with upstream Klipper. Here's a link to…
This is a replacement part for a Ryobi Pruner, this knob was lost on a tool I purchased second hand and then found out the part was on an 8-month backorder. The Knob is part number 318642001 from Ryobi, this is an original design that…
A holder for the Bondhus T-handles sets where the tool can be retrieved from the top or front, allowing room for other tools around the holder. The holder can be assembled by through a sliding mechanism, it also features a French cleat on…
3D printable DIY solution for creating headphone measurements and acoustics research. It is designed to fit the IEC 60318-4 ear simulator coupler and GRAS KB006x pinnae. The external dimensions are designed to be similar to that of the…
This plunger can be 3D printed in order to replace the Fuel Plunger Assembly because you cant buy them anymore. Just so you know, ive never tested the leather or rubber cup holder because I dont have spares.
Lego Icons Concorde #10318 Remixed from DC3 Printed in PETG 75% infill
Es la pieza que sujeta la fresa o el laser en la CNC. Suele ser de aluminio.
I had my support broken, so I made one :-) PLA working fine
Cockpit file for "Airliner toy set inspired by Airbus A318" with extra details.
Spare leg for HP keyboard PN 803181
Toshiba T-318C-2 FAN air cooled Raspberry Pi 4 Case. It support VESA75. Parts for builld M3 insertnut * 6 M3 capbolt 0.8mm * 4 M3 capbolt 0.5mm * 2 Toshiba T-318C-2 FAN https://akizukidenshi.com/catalog/g/gP-17509/
Model for a counterholder, which is needed when you change the timing belt on a 6 cylinder turbo engine of Volkswagen LT1. You can compare this counterholder with the special tool VAG 3181, which is not procurable anymore…. With known…
Ich habe an den ACO-318 einen Silikonschlauch angeschlossen, welcher einen Innendurchmesser von 9 mm (außen 12 mm) besitzt. Um dafür keine Adapter kaufen zu müssen, welche von einem kleinen Innendurchmesser auf einem großen gehen, habe…
It appears that Voron has been using a different PCB DIN plate for quite some time, so other MAX31865 plate to PCB DIN adaptors don't work (they expect the self-tapping screws to be farther apart. This kit only requires: 2 self tapping…
Streamlight 66318 MicroStream AAA Magnetic Holder that requires four 10x3mm or 10x2mm magnets. I printed it with supports for the battery holder spots. It could be printed in PLA, PLA+, PETG, PCTG, ABS, Etc. I printed it in a color…
I assembled LEGO 10318 Concorde without realizing the default height clips into the ceiling. This simple model angles it down to be shorter. The default orientation has it vertical requiring supports for strength with the front and back…
I designed this part to replace the broken axle clip on the Playmobil 3757 - Bulldozer Suggest printing in PETG rather than PLA for strength
Bought a SVI-318 from eBay for my collection and it was missing the joystick. v2 has a smaller (more realistic) collar below the ball. Instructions Due to the item being top-heavy, I found it best to print with a 12mm skirt (touching the…
Ich drucke die Hüllen in TPU auf meinem BambuLab X1C, Stehend mit der Öffnung nach unten ohne jede Stützstrucktur. Funktioniert Top!
This is my suggested solution to LeeH's embossing problem here: https://forum.prusa3d.com/forum/general-software-discussion/fusion-emboss-function/ Updated 240318 with simpler approach. More sketches but less time selecting lines.
For strength, as the set is quite heavy, use at least 4 perimeters (with a 0.4mm nozzle) and 30% infill. If your shelf is not very sturdy and strong and can't hold a M4x25 screw, you can drill the holes through the shelf and attach it…
Przyrząd do cięcia śrub M2 M2,5 M3 lista części: śruba M2x10 wpuszczane x2 (baza) śruba M2x16 x2 (uchwyt) nakrętka M2 x2 (uchwyt) Ewentualnie: nakrętka M2 (do modelu nakrętka) 05-04-2024 Poprawiłem dziury w uchwytach i dodałem wkładkę na…
Completely 3D printed, no additional parts needed, headphone measurement stand using clone E610A coupler and clone KB501X pinna. This design aims for a single ear measurement. For a double ear measurement, use smaller couplers or consider…
A bowl/vase to keep your Easter eggs in, or anything in. It has diamond shapes all the way around it from top to bottom, some rows larger, some rows smaller. It is 80mm tall and 124mm for the x and 166mm y axis. It can be scaled in your…
Modular storage boxes designed specifically for Milwaukee Pack Out 4-drawer toolboxes. Each container features integrated locking mechanisms that secure the box firmly in place within the Milwaukee drawer cutouts. 27.07. Update – Long…
John Deere 318 Lawn Tractor Steering Bushing. Made by measuring worn out bushing and recreating it. Your comments, are appreciated.
ORGANIZZATORE GT318 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Da das Originale Gummi mit der zeit anfängt zu kleben habe ich einfach ein neues erstellt. Vielleicht kann es ja sonst noch jemand gebrauchen…… Gedruckt habe ich es in TPU um das gummierte Gefühl bei zu behalten.
Original part number: 86407870 or 86363180 These pedals allow the vacuum to stand/lock upright when not in use or when being rolled. The original parts break or wear out pretty much 100% of the time, so this is a functional part to save…
The D-Shaft receiver on the original part broke, made this as a cost effective equivalent for replacement part listings. References: Home Depot https://www.appliancerepair.homedepot.com/HD418888-Frigidaire-131858004-Control-Knob.htm Home…
Replaces the original holder for external TFA sensor temperature and humidity. The sensor is simply inserted from above, easy and secure.
A replacement hood release handle/lever for the BMW E28. This is a replacement for BMW part number 51231868556. This part was broken on my 535is which required me to use pliers to pull the hood release cable. I created this replacement.…
This adapter is just for fun and experiments: it makes it possible to hook up a 1995 mobile, the Ericson GA318 to an external power supply.
Gedruckt in PETG. Kühlung ist hier wichtig da die Überhänge doch recht steil sind (oder evtl mit supports)
Stand for vu meter driver board shown in second picture. Source file provided in case you want to modify it.
This is a 3d printed BMW e30 318i engine bay relay cap cover that snap fits into place. Best if 3d printed in ASA/PC filament to withstand warm engine bay heat. Want to learn how to make your own 3d printed car part designs, grab a free…
This kit includes a guide for drilling the lid hole into the main housing, use heat inserts to secure the board and lid to the housing Print settings: Infill: 35% Perimeters: 2 Material: PETG, ABS, ASA
Sleek 3D printable model of the iconic BMW 318. A must-have for car enthusiasts!
I did not find a mount for my LEGO Concorde so I made my own. The print is in two parts both will fit in a standard 256x256. Required Hardware is one M3x40 (longer will do the job) and six wood screws, the mount was designed around…
Tisknuto Petg 0,2,závit m3 ,délka šroubu min 8mm
Printed in PETG, 0,08mm layers, 20% infill
Fisher Paykel Spline Driven - 425080 or part of kit 479318P. Half of the dog clutch in the center of the was basket. Needs to be printed out of something tough,like PC-GF in my case, but PA6, PA12 etc should work as well. For PC-GF I used…
This mounting bracket (Buegel_CSS318.3mf) mounts a MikroTik CSS318 switch to an Ikea Skadis board. Eight M3x8 countersunk screws are needed for mounting the switch to the bracket. There is a second variant (Buegel_CSS318_Sodola.3mf), that…
This plunger can be 3D printed in order to replace the Fuel Plunger Assembly because you cant buy them anymore. Just so you know, ive never tested the leather or rubber cup holder because I dont have spares.
This cable holder replaces the BMW OEM clip 33 18 1 181 218 (33181181218). It routes and secures wiring on the suspension—typically the brake pad wear sensor at the rear, and in some models also ABS/signal wires—so cables don’t chafe or…
Replaces the original holder for external TFA sensor temperature and humidity. The sensor is simply inserted from above, easy and secure.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
lego 30134 40243 4175 3633 3185 3224 30056 19121 41823 33303 32932
Completely 3D printed, no additional parts needed, headphone measurement stand using clone E610A coupler and clone KB501X pinna. This design aims for a single ear measurement. For a double ear measurement, use smaller couplers or consider…
This is my suggested solution to LeeH's embossing problem here: https://forum.prusa3d.com/forum/general-software-discussion/fusion-emboss-function/ Updated 240318 with simpler approach. More sketches but less time selecting lines.
