117 modeli
This is a mount designed for the Hamamatsu C10508-01 Avalanche Photodiode (APD) module . The purpose of the mount is twofold: 1) to enable the integration of the APD module into optomechanical setups; and 2) to provide a protective cover…
Wydruk około 2,20 €–2,68 € nettoWstępna wycena jednego wariantu
Uses M4 Socket-cap screws to mount to the front of the machine. The clippings tray under the cutter head can slide out so you can remove the clippings.
Wydruk około 4,13 €–5,05 € nettoWstępna wycena jednego wariantu
Die Box sorgt dafür, dass der Handmixer ein ordentliches Zuhause in der Schublade findet. The box ensures that the hand mixer has a proper home in the drawer.
Wydruk około 9,13 €–11,16 € nettoWstępna wycena jednego wariantu
This is a cover for the raspberry pi 4 with touch screen MPI3508 (3.5 inch HDMI) Print in 2 parts: bottom (no support) top (with a hole to hang or a honeycomb) (small support for the holes) Optional parts: fan connection (with 2 or 4 snap…
Added a tab to to the Rotary.stl to mount the filament sensor to the guide.
Don't forget heat resistance recommendations. Happy printing!
Update : After using this in the 40C weather and putting in a few thousand km this summer, I made a few changes, to increase the strength of the main piece. Mine never broke, but I like this update a bit more. 7/10/2023 This model/remix…
This model is compatible with the lego system.
The Best position for GPU cooling, 5080 FE is all all-throughflow design, so most space behind the card is desirable. The front and rear brackets makes a solid connection to the case. You need to install the bracket on the GPU first, then…
These covers are for the Gigabyte Aorus RTX 5080 Master Ice (I've only tested these on the white card, so I'm unsure if they'll fit the black version). The purpose of them is to cover the heatsink and the back of the socket while still…
The wheel nut cap remover, this one was designed for an Peugeot 508 I printed with ASA, but I think it would work well with PET-G too
Low profile Pci-e bracket for HP NC364T 435508-B21 Quad Gigabit Ethernet card update 06/12/2020 Uploaded dwg and obj files Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill:…
This model is compatible with the lego system.
This is a deshroud bracket designed for the ASUS PRIME 5070 Ti/5080 series, featuring dual 120mm fans. It uses the original screws for mounting and requires only additional fan screws. For best results, use at least PETG or another…
Basic wall or under desk mount for a dell micro pc, like to 5080 or 7080
This model is compatible with the lego system.
This is a deshroud bracket for the MSI 5070 Ti Ventus / Shadow / 5080 that utilizes dual 120mm fans. It uses the original screws for mounting and requires only additional fan screws. For best results, use at least PETG or another…
If you've ever lost a lego that goes to a set, then you know how frustrating it is thinking you may never build that set again .. just because you can't find that one lego that completes the set .. Now you're left with a bunch of random…
Greetings, Commanders! 🤖✨ It's time to take your 3D printing to the next level! Get ready for "The Ironclad Sentinel," a formidable robot design that seamlessly blends classic style with modern flair. This model is the latest creation…
Print in Petg or ABS. The black rubber O-ring is stock
This model is compatible with the lego system.
What is this? GPU Anti sag bracket to secure RTX 5080/5090 Founder Edition cooler from the rear side to eliminate sag. What have I modified from EIGA's original model ? Adjusted the model to fit RTX 5080/5090 FE. Made the structure more…
Blitz Gas Can MODEL#50805 Replacement Cap The model is designed to be printed with TPU filament No supports needed 0.1-0.15 Layer height recommended Print upwards with “GAS” side touching the build plate Easy and straightforward print,…
This is my attempt at modeling the Holosun 508t v2 RMR. It's not perfect and has no branding on it. Might need to be filed down on the front side to fit your weapon (I had to for mine). Have fun! Post-Printing Category: Sport & Outdoors
Bracket and frame to mount a Dell OptiPlex 5080 small form factor computer on the wall. It consists of two parts. The bracket to fasten to the wall and the frame to attach to the computer. The idea is to re-use the wall bracket in case…
Greetings, Commanders! 🤖✨ It's time to take your 3D printing to the next level! Get ready for "The Ironclad Sentinel," a formidable robot design that seamlessly blends classic style with modern flair. This model is the latest creation…
A version of the tail light mix specifically for my L508. I printed it in ABS, it needs support and it works great!
This model is compatible with the lego system.
DIN 508 Nuts T-slot M4 - M48
Fan bracket to fit 2x140mm fans to PNY GeForce RTX 5080 card. Can be attached to radiator using original screws
I measured the circuit board and designed it in the program in order to be able to make a housing for myself. I hope someone else can use it. Category: 3D Printing
airvent for side doors on a mercedes 508 printed in PETG, no support Print instructions Unassociated tags: mercedes 508 Category: Automotive
I own a Mercedes 508D , but some of the door trim was missing. I modelled a replacement part. fits nice. printed without support in PETG.
T Slot DIN508 - M5 6/M6 8/M8 10/M10 12/M12*14
I believe it’s very important not to block the gap between the motherboard and GPU, since it’s the main source of fresh air for one of the 5090’s fans. I intentionally made it as air-unrestricted as possible. Maybe (unlikely) I will make…
This model is compatible with the lego system.
MOD. FIAT 508 Balilla | 1935 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Hello! Here is my iteration of the flipped travel kit for the 5080 and 5090FE. For the anti-sag, I ran it without having to screw in the tab into the slotted part. But, if you'd like the extra security, I'd recommend using an M3 (CSM3-8)…
This model is compatible with the lego system.
Our metal (cast zinc?) strike broke so I modeled this from scratch and printed it while we waited for a replacement. Worked well enough that we could do a couple loads of laundry - printed part seems like it actually holds up pretty well,…
A couple of years ago i bought a 508D. It came without the covers for the back door ventilation holes. Lammersly made a cover for the front doors, but the back door ventilation holes are half-size. Inspired on his model i made a half-size…
This part is ment to replace a broken glove box stopper on most honda cars. I recommend printing it abs due to high temps in a hot car
Remix of Eigas original model but fits the MSI RTX 5080 INSPIRE 3X OC (the gold one). In the cover photo the thicker one is the one I remixed, Eigas is the thinner one on top.
voici la piece pour le lève-vitre arrière gauche de votre Peugeot 508sw généralement cette piece casse au niveau du plastique qui retient les cables tendu pour monter et descendre la vitre de votre véhicule prochainement je fournirais une…
Simple mount to reuse your existing adapters for antennas in standard d-type mounting situations, e.g when mounting two transmitters with LD Systems U500 RK 2 or similar. The opening has some room and due to the plastic the adapter might…
Unfortunately, my Inter-Tech 4U-4408 server case does not have a 5.25 bay. So i made this mount to insert a 2x5,25" Icy Dock ToughArmor MB508SP-B. It fits into 2x 5.25” drive bays and you have to cut a hole into the frontplate of your…
ASUS Astral 5080/5090 holder to support the card inside a Corsair 5000D case. The included holder by ASUS is way to long to fit in this Case. Without a holder this beast shouldnt be used to provide damage to the card and board. Variant A…
Just follow victor_frncy's instructions and it should be fine.
Magene L508 Halter für die Satteltaschen Ich nutze sie selber an meiner Ortlieb Seat-Pack QR und Rovativ
Finally after several trial and error, I managed to create the GPU travel kit for my GPU, which is: Inno3D RTX 5080 X3 OC (the one with vapor chamber) the 3D base model is not entirely made by myself. I tweak the GPU Anti-Sag from EIGA's…
This model is compatible with the lego system.
Easy to MMU print I used this 2 color Easy printable filament to create famous looking color for hood (silver + white) - colour is changing as you looking at it :)…
This a remix of https://www.thingiverse.com/thing:5443913 The only change is that the mount is rotated by 90º since the Magene one is like the Garmin Varia but reversed. The ring border has a glitch on one side but doesn't affect the…
This is remix of two model https://www.printables.com/model/857615-garmin-varia-bontrager-blendr-saddle-mount and https://www.printables.com/model/439489-magene-light-l508-saddle-bag-mount Magene mount 90 deg rotated and do'nt work…
BOM M3 x L6 Screws (4 pcs) M3 x L8 Screw (1 pc) M3 x L4 x OD5 Heat-set Insert nut (1 pc)
BoM Thesa MOLL STANDARD (window gasket for grip) Printing walls: 3 infill: 10% Adaptive Cubic PLA works, but i don't know if it withstands a hot summer as hinge pin use 1.75mm filament See also FreeCAD prject file at GitHub: holder.FCStd…
Remixed for my Magene L508 and it works great on top of my strida cushion!
This is a remix of Ryan Kelly's design. I made it taller and added clips to make releasing the saw easier.
adapter for 140mm fans, uses original fans screws, and M3x5x4 inserts with M3x35 screws for new fans. NOTE: for full cover you will need to bend 2 radiator's cable hooks
I used 2 arctic 15mm P12 slim PWM fans on a Ncase T1 case. The fans are fixed in place with 20mm screws that are included with the fans. They screw directly into the plastic. It's not the most elegant solution, but it works fine. You need…
Description This is a set of work-holding jigs for use in a bench vise. They precisely measure and hold the metal stock required to build Steve's excellent Pendulum Clock so you can cut them with a hacksaw and perform filing operations.…
Replacement for part 39835508
I pasted Q508left and Q508right with some pieces of double-sided tape on a plastic sheet. There are holes to access USB and DC connectors in the left side. Material: PLA Support: No Nozzle Diameter: I use 0.6 mm
heres my discord server where you can find up coming projects https://discord.gg/NSbvM7QBmx Shout out to miles peterson for the rotator Hardware you need for siren pitch and rotator…
Armrest Organizer for Peugeot 508 Enhance the comfort and organization of your Peugeot 508 with our stylish armrest organizer. Custom-designed to fit perfectly in the central armrest, this accessory offers a practical solution to keep…
Mounting bracket for Philips 18W LED batten Type: 85087 MrFox misplaced the original metal mounting clips. Designing and printing replacement brackets was so much more fun than trying to source original clips
support: no walls: 3 infill: 10% Adaptive Cubic PLA works, but i don't know if it withstands a hot summer Example: See also FreeCAD prject file at GitHub: holder.FCStd
Procedural motherboard case for the cxy-v2-0508 (Tronxy X8 board) created using cadquery . This project is also hosted on github To generate a custom stl you should edit and compile the file TronxyX8BoardCase.py . To compile the file…
Components to attach a smaller motor to FoilDrive Assist Max units. WHY: The smaller diameter 5085 motor has less power than the 6384 HP motor that FoilDrive provides. The smaller diameter makes it better suited for wing and parawing…
Halteklammer für den kleineren 1508A Motordriver für den Smars Roboter. Passend für alle Smars Versionen.
The 3D base model is not entirely made by myself. I tweak the GPU Anti-Sag from EIGA's ASUS Pro Art 3D file and the Back Panel from FormD official website for the ASUS Pro Art 3D model (although the model also made by EIGA...) I build…
This is a rear bracket for the Formd T1 v2.1 and 2.5, specifically designed for the MSI RTX 5080 Inspire. This greatly reduces wobble on the GPU especially for people who travel a lot with their PC. I use this and a remix I made of Eigas…
The very reasonably priced and good-perhforming Hypario 508 X-Soft dual-band 144/430MHz HF/UHF Mini SMA-F antenna has one minor problem: the soft rubber covering on the antenna can come loose under extreme conditions (like inside your…
I need to take a saddlebag with me on long rides with spare tubes etc., so the seatpost mounts are no good for the radar. I created this mount for my saddle bag (Topeak) to allow me to swap between bikes with the removable clip, or…
First, a shout out to the following creators whose GPU support models saved me a lot of time since they already had modeled the front panel hole locations. unknow1assassin | Printables.com aeberbach | Printables.com This is a GPU support…
A set of simple brackets to mount the NICGIGA S250802P switch upside down. Perfect for mounting under a desk, on a wall, or any other flat surface. This design reuses the original M3 screws that come with the switch's included metal rack…
I got a dropper with broken cable ferrule so I print a new one with ABS. Manufacturer code P3508.
A low-poly hexagon vase with a 90° twist, designed to display the LEGO® Botanicals Daisies set (11508) . The box says "vase not included", so here's one. Size: 110 mm tall, 84 mm across at the widest point, with a neck opening of about 28…
Dieses Teil verbindet den Luftfilterkasten mit den Vergasern und ist einzeln nicht bestellbar. Einfach aus TPU drucken und fertig!
This is a lamp base for the lampshade "Buble Lamp shade" by @CarlosAceves_395508. Needed parts: Printed parts: "Light diffusor" "Attachment plate" "Buble Lamp shade" by @CarlosAceves_395508 scaled according to the attached image "Base"…
A mini tornado siren model of a 508. It doesn't scale with anything, just a tiny model. Credit to the people who took the irl pic of the 508
These are my spare parts for my sliding door from HKS. The clippers for the mounting are broken off, so I had need for new ones. After I printed the first fairing and it fitted perfectly, I of course mirrored the part and uploaded it…
reproduction of 10mm dust cover for mil spec connectors
I remixed this design to be able to fit over 1/2" pine dowels used on my Flitetest Electrohub. They fit great and seem like they'll be quite strong. They use a standard 25mm x 25mm mounting hole spacing. Print Settings Printer: Davinci…
Lego (85080) Brick 2 x 2 Corner Round Stud about 1 gram
I wasn't happy with the cooling performance and noise of my GPU, so decided to de-shroud and fit 2x Noctua 140mm fans. Removal of the shroud is slightly tricky due to 2x screws hidden behind the main board. Noise is now much lower and…
battery cover for Scientific calculator EL-508S
ORGANIZER GT508 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
We purchased a rotary table at work that didn't have any jaws for thin material These can be inserter, by fastening the screw you will grip the part. Use glue to ass 200 sandpaper on the jaws in-order to improve friction. print at 0.2 mm…
Protects the Hakko Blue 508 with the sharp tip. Prevents damage and oxidation. May be tight or loose depending on debris build up. Print in PETG as a safeguard, PLA does work.
Beginning to work on the kitchen drawers and need to get a gridfinity base plate printed out. Used Soleyin PLA white as it was cheap and it did a great job. This is split to be able to be printed on the Creality K1 bed. From the AI Design…
I needed a way to store and sort all the bobbins I use with my Juki 1508NH. These are U style bobbins and measure approximately 27.75mm x 11.75mm. I mounted the base to my sewing table with double sided tape. The trays can be stacked on…
Peugeot 508–shaped cookie cutter for making unique car-themed gingerbread cookies. Ideal for gingerbread, sugar cookies,
The Lidl lamps a not that great when mounting them on a wall with a powercord from above or below (The wobble a bit). Therefore I designed this mount for the wall. I would suggest printing it in PETG since PLA is not that weather…
Screen designed to fit the smaller wedge attachment for the VOC508S. This helps prevent the hose from getting clogged. https://www.amazon.com/gp/product/B08P1M8NX2
Import from Thingiverse for Printables - https://www.thingiverse.com/thing:51675
Simple replacement for the tinted black plastic on the 4508GS case, as well as a mount for a 92mm fan that takes up the 2 5.25" bays and the one 3.5" bay.
![KRIT YAMSASO [20250823002]](https://media.printables.com/media/prints/dcdc1888-3b97-4755-b33c-a3a68e6d5b1c/images/10513205_f0e149b6-dc74-4a1f-aa7d-d1caa88da711_c94e074d-013a-4696-ba34-f5ff86f9b036/002-1.png)
![KRIT YAMSASO [20250823003]](https://media.printables.com/media/prints/475ffca7-8e58-42d2-94fb-9218a0166074/images/10513235_b648f618-a987-4e91-82cc-6ce501278816_ab7150ac-cc2f-4ed5-8368-91b9419b54d2/003.webp)
