Liczymy pasujące modele…
Snap-on protective side panels for QRP Ham radio Xiegu x6100. Very accurate model. No supports needed. You just need to slightly abrade surface of the holes and pins where is meets the hole. Then push the 8 pins into the holes, no need to…
Wydruk około 2,73 €–3,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
prints with no supports
Wydruk około 6,07 €–7,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This bracket allows you to secure a Hitron CODA-5610Q cable modem to a wall. This is one of the modems used by Fizz in Quebec. Design features The bottom bracket is in two pieces to save material, and each side (left & right) has a short…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
I encountered the problem that in the months with temperatures < 0°C my rear brake bowden cable freezed because there was water in the bowden cable. unfortunately this brake is designed in a way that in horizontal mounting position (as…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This project is part of the Educational Innovation Project IE25.6106 at the Universidad Politécnica de Madrid. It involves the creation of a custom-designed key that was awarded as a prize in an educational escape-room activity. The key,…
Wydruk około 3,22 €–3,93 € nettoWstępna wycena jednego wariantu
This activity is part of the educational innovation project XXXXX, which aims to improve student attendance through the use of physical rewards distributed in the classroom when students complete certain activities. Critical courses or…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
Great model, remixed to fit the DSS610. I don't actually have the Makita rails - I have Evolution Rails, but I am pretty sure they are the same. I have merged a couple of bits from the original design to minimise gluing and assembly…
I needed I replacement mount for my TP-Link access point. It should fit other models as well. Printed at 0.2 mm layer height with PLA
does not fit the DW-5600 and similar as the buttons on the module are much closer together.
Junction box mount for v1 TP-Link EAP 610. It should work for the 620, 660, 670 or any other of the EAP models with the same mounting system. The included drywall mount for v1 EAP 610 didn't work for a single gang ceiling junction box the…
Wall bracket for mounting a HP Thin Client. It fits my T620, but I guess it fits more models. See drawing for mounting measurements. Use the screws from the original stand. You can print without support @ 15% infill.
G11 drive tray for 2.5 inch drives for Dell R610. I edited the screw holes to fit more common screws used for 2.5 inch drives. Edited from a different version found on Thingiverse ( https://www.thingiverse.com/thing:3715861 ) Print…
A screwless caddy for DELL PowerEdge R310, R320, R410, R415, R510, R515, R610, R710, T610, T710. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: eSUN PLA Notes: Customs…
Multiboard holder for the Irwin Quick-Grip 150mm(6")-610(24")mm Medium Duty clamps. The Heavy Duty clamps are thicker (wider) so don't fit. This holder uses Multiconnect connectors. 4 of them is sufficient. Multiconnect is much stronger…
This is a vertical stand for APs from TP-Link Omada EAP 6 series version V1 including EAP 670, 660, 650, 620, 610. Usually these APs are required to install on the wall or ceiling and one have to drill holes in the wall. Since I just want…
This model is compatible with the lego system.
Wheel 11mm D. x 8mm with Center Groove
Perfect fit guiderail adapter for Makita DSS610. Didn't change anything. Just separated Tomt95 parts. You need to print the following parts: Adapter_Glider x1 Adapter_Main_Left x1 Adapter_Main_Right x1 Adapter_Main_Block_Center x1…
Fahrradständer für z.B. Gravel oder Rennrad Shimano GRX. Für Tretkurbeln Breite 35mm, Abstand zur Kurbel 15mm, Kurbel dicke 15mm Abstand Kurbel zu Boden 90mm oder 110mm Optimiert für Specialized 2025 Diverge Sport Carbon mit Shimano GRX…
This is the exhale Adaptor that's design to fit with all my other filter capsule. It is designed to filter out the air you breath out, just incase if you got sick and this will prevent the virus from spreading. Print instructions Print…
Simple case for PAM8610 amplifier. Tight fit around the board. Button size is 15x10mm. Photos show PLA draft print of 0.3mm with thin wall detection.
Wall mount compatible with LEGO set Thanos: Ultimate Battle - 76107 Printed at 0.2mm layer height with 0.6mm nozzle, 15% infill no supports required Design is in no way affiliated with or endorsed by LEGO.
Originally posted on Thingiverse here: www.thingiverse.com/thing:2825299 This case is for the phone Samsung Galaxy J7 Prime, that is g610 models; do not confuse with the J7 2016, j710 models. Some of the models are designed for rigid…
Gwr 61xx 6100 class model rail model train british rail
These are mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+. The rack ears for the CSS610-8G-2S+ are the same as those for the CRS310-1G-5S-4S+ in my previous mod . The other parts seen in the photos are from NatalieT's project…
When this little beast lands on rooftop, this piece can easily break. I designed a spare, much stronger part. Fitting perfectly with 0.2mm layer height print. Make sure you slice with 100% infill. No need for supports. No need for raft or…
A 3d model caddy suitable for 2.5" HDD/SSD. Perks: compatible with Dell servers R610/630 (perhaps others too); the caddy can be easily plugged in and pulled out; has a little space for marker numbering or to put a sticker on it; allows to…
Simplified model of a remix. Reduced file size by 125x. The original STL is 250 mb, and the new STL is 1734kb. Also included a 3mf file. I made mine with a resin printer (Elegoo Mars 3 Pro) using Elegoo's ABS Like resin Originally found…
I found that a Brother P-touch D610BT label maker (and possibly other similar models) fit nicely in a Milwaukee PACKOUT Compact Organizer (48-22-8435) but the TZ-e cartridges and other associated cables didn't fit very well so I modeled…
Thanks logitech for making a spacebar with unusual sizing (5.75u lol) Modeled from scratch with my caliper and some eye measurement
a6700 Users - The Grip does not fit because of the reworked mode-switcher, use the following remix by @shoyler_79369 (UNTESTED) : Extended Grip Printing instructions: Use supports when printing the model, otherwise you will not be able to…
This is a mounting bracket for the EAP610, but will probably work with other tp-link access points as well. Meant to function as a stand, or a wall mounted bracket. Will also mount on a 1-gang electrical box if you prefer the access point…
This model is compatible with the lego system.
Wanted a cover for my C610 that just worked. Designed this in Fusion 360 and it works great! The thin ring front means you can see the LEDs on the camera when they're on whether the cover is opened or closed. This uses a print-in-place…
I needed the norm finger according to IEC 61010 specifications for pre compliance testing. Print the handle and the finger separately and glue them together. Make sure the finger is seated all the way. The final length should be 80mm. For…
SHIMANO Deore Brake level piston guide
This model is compatible with the lego system.
This is a case for the "choppy" electronics kit available from jaycar: https://www.jaycar.com.au/5a-12vdc-pwm-motor-speed-controller-kit/p/KD6102 The instructions over at https://diyodemag.com/projects/choppy_the_pwm_maker mention some 3D…
Replaces the CD drive and card reader and holds two 3.25-inch hard drives, but only the 19mm thick ones because, well that's what I needed the file for, and I didn't have enough room to work with 25mm ones anyway. But yeah, this is made…
protection for x6100 ham radio.t the last 4 files are updated. everything should line up. you will need to flip the last file. it uploaded on the wrong side. ive printed many version without supports.
I lost the mount that came with the unit, so decided to design my own. This allows you to mount your TP-Link EAP610 access point on a wall or ceiling. There are 2 screw holes to attach to a wall or ceiling stud. Print Settings: Filament…
Requires a BNC angle connector!
Adapter that secures the LM18-LSI sensor lens, for the PMW3610 sensor, when used with the original BastardKB Charybdis trackball assembly.
I recently got a Macintosh Quadra 610 and nearly all of the internal plastic (and some of the external plastic) was shattered, just a byproduct of the era. I like adding SD-card hard drive replacements to my machines and since the drive…
I bought a cheap 1610 engraver (the LinkSprite, but honestly, I think they are all the same). It had some wing nuts for clamps but it was hard to get things to hold still on the bed. Print 4 of these and use the wing nuts to secure to the…
4x M4 x 40 screws needed for the 6100 or 4100 firewall (optional) velcro tape for the powersupply (optional) c14 to c7 adapter v5.0 with enhanced stability v4.2 1st online release Print: front to print bed (look at the print 3mf)…
Both use the tabbed pole mount on the rear of the EAP allowing it to drop into the bracket. One is a simple wall mount, the other is a freestanding table top stand with cable routing for 6mm diameter cable through the base. Cut out allows…
Desktop stand for Xiegu X6100 with a 6010 12v cooling fan mounted behind and cooling channels behind the radio. This remix idea from on2on and jeff_j3ffr3y. STEP and STL are modeled at 1000% due to an error in original STL import before…
This model is compatible with the lego system.
This is a remix of thing:1118084 by Roy Edwards . This is a wall mount for Philips Sonicare HX6100 chargers . It's intended to be mounted to a wall or tiles using double-sided tape such as 3M VHB and resembles a Feller light switch to…
Dell PowerEdge R610 R710 SFF 2.5 Inch HDD Tray
Obal na glo Hyper Pro (model G6100) / glo Hyper Pro cover (model G6100) + koš do auta na použité náplně / car bin for used refills - https://www.printables.com/model/1269841-glo-kos-do-auta Pokud se vám model líbí, tak budu rád za ukázky…
Model with true aspect ratios. Ideal for hanging on the wall. 200x3mm. Collect all the CarSilhouette! Wall Art
Simple protection pour l'écran tactile WaveShare 5,5 pouces amoled (modèle WV16103), pour lequel je n'ai quasiment pas trouvé de modèle imprimable sur le net. Le but à terme est d'intégrer des pieds (ou un système d'accroche), ainsi qu'un…
2.5" HDD / SSD bracket for HP t610 micro computer. You need also M3 L20mm bolt. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.3mm Infill: 20% Filament: gembird PLA+ black Category: Computer
This case was designed to mount the radio to a molle panel and still allow access to the controls. Sides left open to allow removal of the radio without removing connections.
I recently got a Macintosh Quadra 610 and nearly all of the internal plastic (and some of the external plastic) was shattered, just a byproduct of the era. I wanted to add a CD-ROM drive to the machine so I needed a new drive sled, so…
The switch itself is 16 pounds so special consideration was taken to ensure that this model can be printed with generic settings and still be strong enough to hold the device in the rack.
---- Description I created this stand because I found reaching over the keyboard to use my drawing tablet quite awkward. Having it towards me and above the keyboard allows me to easily reach the tablet. This is intended for a Huion H610X,…
I recently got a Macintosh Quadra 610 and wanted to add a CD-ROM drive to the machine so I needed a new bezel that would fit an old caddy loading CD-ROM drive that I had on hand. Here's what I came up with. If you'd like to mess around…
The tab on mine broke after 8 years, so I designed a replacement that takes the magnet from the original plunger. (I removed the magnet by using a 3 pound sledge and eye protection). Pause the print right before the printer closes the…
Caisse C61000 a l'échelle HO
ENG Holder Adapter for G-Shock GW-M5610U-1, should be compatible with GW-5000U-1 and other GW-5xxxx models from G-Shock with similar rigid bracelet and shape. Original Model by @PRINTSY…
Extended version of a hot shoe grip for a6000 series cameras. This allows for some access to mode knob while not interfering with the standard Sony eye piece cover. Pictures show how the model fits on an a6600 and an a6300.
Ich Habe Hier einen simplen Sicherungs Clip hergestellt für die Steckverschraubung von Festo 186107 QS-G1/8-6-I I have made a simple locking clip for the plug-in fitting from Festo 186107 QS-G1/8-6-I…
This adds a carbon filter stage to the WINIX C610 air purifier (sold at Costco). The stock purifier effectively only has a HEPA filter. Fill the device with acid-free activated carbon. MAKE SURE TO FILL IT TO THE BRIM, or else airflow…
Customisable 2.5" HDD holder for HP thin PC T610 Print instructions Unassociated tags: thin pc Category: Computer Print Settings Rafts: No Supports: Yes Resolution: 0.15 Infill: 30
Exact same as Exact same as this model https://www.printables.com/model/585630-terraforming-mars-player-mat-overlay/collections but with stl file whereas original model link only has gcode
This model is compatible with the lego system.
This project contains 5 improvements for a 1610 CNC. These improvements were inspired by the following YouTube videos of JJ Hontebeyrie: https://www.youtube.com/watch?v=NNrqx62lyBI&t;=602s https://www.youtube.com/watch?v=_gX_YCsN4wo 1.…
Stand para el grandstream 1610 Print Settings Printer Brand: Hellbot Printer: Hellbot Magna 2 230 **Rafts:** No Supports: Yes **Resolution:** 0.2 Infill: 10 Category: Tool Holders & Boxes
Xiegu X6100 Chassis Bottom Plate Remixed for 1/4x20 Threaded Insert for use on tripods and other 1/4x20 threaded accessories. I had to modify my threaded inserts by cutting to length with diamond cutoff wheel in a rotary tool. Affiliate…
Hi ! Bored about dust falling into the rail of your favourite 3018 CNC and family ?... A simple snap-on dust cover (but it takes time to design in order to have a good snap-on effect and left the maximum space under the cover for cable)…
This is a mount that is intended for use with the HC610 Iridium Antenna which I'm using for Iridium ACARS Decoding. Required things: 4x M3x20 Screw 2x M2.5x6 Screw 4x M3x6 (OD 4.2) Heat Set Inserts For the heat set inserts I'd probably…
A minimal cover for the TLC 6120H cellphone. Must be printed in TPU/Flex material. Includes openings for USB/Microphone/Speakers and AUX. Was printed on Prusa Mini+ and used TPU95 flexible filament with success.
Small Mount to use the existing Screw-Mount Holes of the WAX610 Models to mount the AP to your 17mm Spigot Stand. The ¼ Inch Screw is optional and only needed, if you are planning to mount the AP upside down. Printed on P1P with PETG and…
simple and easy to print!
I tried another pen holder for my CNC, but I found that it didn't have any support near the pen tip, and the style of pens I'm using (Staple's ultra fine tip permanent markers) really don't draw well without support. I've started using…
2x 1.8mm x 24mm spring bars required The adapter in the photo was printed on a PBF-LB-P printer(Fuse1) If you want to print it on a MEX printer, support structures are required. Add support in hidden areas.
This is a 3D-printable tool to loosen and tighten the OEM oil cap on a Honda S2000. The part number this works with is 15610-PCX-A01. It's easy to overtighten the oil cap and crack it in the valve cover. Do not crank on it with this tool!…
SW6106 Board is Glued with B7000 (you need to file 2-3mm off the sides) Single Click Turn ON Double Click Turn OFF HOLD 5s Turn ON Long time You need 4 Screws M2 SW6106 Board Brass inserts M2 Print Settings Printer Brand: VoronDesign…
I made eyecup consisted of two parts - the outer parts can be printed from TPU while internal - PLA or PETG.
Case for XM74610 ideal diode. There are 2 versions: Top wire (Orange in picture): for when you solder the wire on top of the board. Slim and have no hole for heatsink. This diode should be good without heatsink up to 6-7a in my testing.…
Here is a mount for the ChipSHOUTER, a electro-magnetic fault-injection tool, to fit a classical CNC laser module mount. If your CNC mount doesn't have the notches to fit a square laser module, you can easily adapt the design to be shaped…
Mini pc with modern CPU are still very expensive, and they also have the disadvantages of using soldered CPU or sodimm ram. I choose this board for the cheap price while still being compact, even if it's not an itx board…
Ich Habe Hier einen simplen Sicherungs Clip hergestellt für die Steckverschraubung von Festo 186106 QS-G1/8-4-I I have made a simple locking clip for the plug-in fitting from Festo 186106 QS-G1/8-4-I…
I originally had an old phone mounted on a similar mount, but it was using some freeware, that had not so great quality. So i found the DCS-6100LH for ~9€, and it gives me 1080p, can reccomend for the price.…
This is a replacement expansion slot cover for the back of the large pizzabox macs of the late 68k era and early PowerPC era. The Centris/Quadra 610 and the Power Macintosh 6100 among others. Included are several versions with various…
Harbor Freight sells a small organizer box that looks like it would be perfect for sorting small screws. Unfortunately, the designer didn't think things through very well and there is a sizable gap above the top of the dividers that allow…
Samsung S5610 phone case In the age of smartphones, it's a bit strange that I still use this type of phone. I got used to it, so I still have it. I also have a smartphone, which I use mainly for taking pictures. If anyone has this type of…
Philips sonicare charger HX6100 Skadis toothbrush hanger Printed with normal auto generated supports (don't try tree support trust me) 75% gyroid infill, 6 wall loops, printed using outer brim but im not sure its necessary fits every…
low budget NAS/download station stand Print Settings Printer: Micromake D1 Rafts: Doesn't Matter Supports: Yes Resolution: 0.3 Infill: 30% Filament: any PLA Category: Computer
More models available at https://29flodigital.etsy.com If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at…
Introduction I love my MiniDisc player, but unfortunately, I am spoiled by wireless headsets! I decided to remix a cradle for my Sony MZ-NF610 and turn it into a case that holds some commercial-off-the-shelf parts to add Bluetooth…
This is a remix of my previously posted print Privacy Cover for the Logitech C610 Webcam that adds an eye when the cover is open for a constant reminder that one could be being watched. Print instructions Load Galaxy Black in spool #2,…
The engine cover/hood key for my mini excavator was not sized well and I was worried it would strip over time. I printed this one to replace it. It fits much better than the original. Example printed vertical (key hole down) in PLA-CF…
This is an protective case for the Vector CAN/FR Interface VN7610. In addition to the print you need to cable ties to secure the case to the interface. I provide all my models for free, if you want to support my work, you can buy me a…
Have you broken the original rear bumper mount? Print this model!
This is a cover to protect the Hirose FX2 Connectors On the Xeltek Superpro Programmers when adapter is not in use. Print in your choice of material, I found with PLA that a .2 layer height works the best for fitment. Hope this helps…
![[Remix] Modular Watch Stand : Holder Medium Adapter for GW-M5610U-1 / G-Shock GW5xxxx](https://media.printables.com/media/prints/540338/images/4351600_41e9d409-f21a-4e93-8e71-dd39016b6e93/dsc_0482.jpg)
