Liczymy pasujące modele…
Approximately 700mm long model of the MZKT launcher. The model has 8 axles of which the first two are steering and the last 3 are steering on the opposite side, on the back there is the rotation control system. The silo can be held in a…
you can print it without supports use some 1.75mm filament for the hinges
This is a "Slide-to-open" friction-fit webcam cover for the Logitch c922 webcam. It prints in three pieces and "snaps" together. It does not require any glue or other adhesives. It is also sized so that it does not cover the blue…
This model is compatible with the lego system.
This model is compatible with the lego system.
I created this to keep my DCST922 string trimmer up on the wall. It can be hung with the trimmer folded, facing either direction. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with…
No special printing directions other than make sure you print it flat side down and support inside the part where it friction fits onto the x axis rail. I printed the CamScrew-10mm.stl screw made by @Vector3dArt to attach the webcam.…
Ford model T Speedster 1922 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
Remix of the ‘Larger slide cover’ by RasmusB, which is based on https://www.printables.com/model/411917-logitech-c922-webcam-cover-slide-to by codysechelski Remix differences from RasmusB's version Removed the gap between the body/button…
This is a simple wall mount for any webcam with a 1/4 inch tripod hole. You can use a 1/4 inch screw (I used 11.5mm / around 0.5 inch in length) or print your own. Print the mount verticaly so no supports are needed Print Settings Printer…
For users who got the Xiaomi Mi Light Bar, and, the Logitech C922 Webcam, this mount could be the best option. This mount can put the webcam directly on the light bar arm. The USB cable of the light bar can be arranged through the mount.…
This is a camera mount model using remixed/designed links from Sneaks' popular articulating camera mount for a Rpi camera. I'm using a Logitech C922, but I'm sure other similar C9xx models will fit. This was mostly born because I didn't…
This model is compatible with the lego system.
This adapter screws onto a microphone stand and holds a Logitech C920, C922, or C930 webcam by snapping the stand portion of the webcam into this adapter. The webcam can then be angled up or down with a much larger range than if it were…
The panel mount ILI9225 LCD provides a RGB graphic display, typically used with test instruments. The display refresh rate is sufficiently fast enough to display static or modest screen updates. Here is my 3D model of the panel mount LCD…
I found the original model to be too long for my liking. I needed to use a custom gcode to move the bed out or move the printer head out of the way which slowed my prints. This version has a shorter bar which allows the camera to be…
I modified my earlier version to more closely resemble my other DeWalt wall mounts. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with PLA @ 20% infill, and using Prusa Slicers…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I've created this reworked C922 case so I could use a C mount to 1.25" telescope adapter with an IR cut filter and use the webcam for planetary and lunar imaging. I've made the distance from the mount to the sensor according to the C…
This model is compatible with the lego system.
This is a USB camera mount I made for my Logitech C922. It allows a center view of the print. I imagine it will work well for other similar styled USB cameras. Print with tree supports at 15% infill.
If you have old smartphone mobile lenses and want to use them to change up or enhance your existing webcam, these clip in place adapters will allow any bayonet-style lens to mount firmly against the webcam. Add barrel distortion,…
Heckspoiler für Carrera Porsche 911 GT3 R (922) im Maßstab 1:32 Das Modell ist von seiner Form nicht identisch zum originalen Spoiler von Carrera und auch nicht so filigran. Er wurde so konstruiert, dass er, insbesondere an den…
The Vauxhall Type D was an upper-class car produced by Vauxhall Motors from 1912 to 1915 and again from 1921 to 1922 as the Vauxhall 25. More than 1,500 were delivered to the British Army as command staff or ambulance transport vehicles…
Designed this to elevate my webcam so I could see most of the print area.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a custom matte box designed for the Logitech C920/C922/C930 webcam, remixed to include a “hook” that securely attaches the matte box to the webcam. The hook ensures a snug fit without requiring any adhesives or additional support,…
Battery hold down strap for RC10 B2 and RC10 B3 2WD R/C Buggy Want More Free Designs? Like and comment. Thanks!
The design is so simple - no explanation needed on how to print this I guess. No moving parts.
The emblem of FC Lokomotiv Moscow is a distinctive and iconic symbol that represents the club's rich history and values. At its center lies a large red locomotive wheel, symbolizing the club’s name and heritage as a team originally…
Replacement baseplate for Ikea hinge 109337 The part itself has the part No. 109221 I used it on a Kallax door insert. On top of the printed part you're gonna need: 1x M4x10 1x M4 nut Some M4 woodscrews and maybe some washers I used a…
I could not find a good enough webcam mount for either my webcam or the printer I am using so I made my own. it mounts on the right side of the printer head bar. There is also a hole for a screw in the print just if you would need to…
Needed this after removing the useless “Smartphone Integration” from my 2015 428i. This apparently fits many models and years. I originally intended to print this in TPU but my nozzle clogged mid-print. So went with PETG. The fit is…
The nativity scene from 92212-nativity-scene-belen was one of the first prints I made on my Prisa Mini+. I wanted to have something to place the star of Bethlehem on and tried creating something in PrusaSlicer that worked but wasn't…
a small webcam holder where you can put your c922 ( maybe other webcams too? c920? ) and mount it to your wall or in your housing. 0,2mm layerheight PLA, PETG, whatever you like :) Infill 20% 3 Walls Threading M4
Simple to clip over privacy cover for the Logitech C922 Pro webcam. This print covers full screen unlike others that are smaller. I included a cable guide to keep the wires tidy and out of the way. I printed this in PET with 60% infill,…
This is a webcam mount for a anycubic i3 Mega printer. A 0,5 inch / 12.5mm long 1/4 bolt is used to attach te webcam to the mount. The mount is hold in place with two M4 screws. (tapping the holes is adviced) If you found this useful,…
This model is compatible with the lego system.
Dewalt DCST922 Strap mount Add a shoulder strap to your Dewalt string trimmer ABS .2 Layer height 100% Infill Supports required on part 1 Hardware: 4 - M5 x 20mm cap head screws 4 - M5 x Flat washers 4 - M5 Threaded heat set inserts If…
As the original model author, I was not satisfied with the aesthetics of other mounts. Her model really fits nicely with the curves of the camera, but in my case, I needed the mount from the bottom and not from the back. Print like the…
This is a sensor housing for indoor use. The outside dimensions are L x W x H: 90mm x 70mm x 43,5mm. The wall thickness is 5 mm. You need: 4 M3 thread-inserts to complete this build. 4 M3 x 12 (or less) ISO 4762
This adapts a 92 mm 9225 muffin fan to a 2" plastic pipe. Using 2 of these enables you to insert a fan in a 2" pipe run. I am using it to exhaust fumes from my composting toilet in our RV.
3D printable wall mount for a Logitech c922 webcam and mount for a 90mm ring light (one from amazon with a bendy neck).
Raised feet for my Coolermaster HAF 922 PC case. The need for raised feet arose after I installed a cooling fan on the inside bottom of the PC case. The stock feet provided very little airflow especially when the case is placed on carpet.…
No axis disassembly is required. The arm fits nicely on the end of X-axis. UPDATE V2: Vertical version! ( I need to improve light now 😅) Since my printer is sideways in my closet, the v1 was a bit impractical and I kept bumping into it.…
lego 3867 3811 2628 2629 15624 18922 71772 69958
Camera Mount for 25.4 x 25.4 mm aluminium extrusion with cable guide to keep the cable tidy, protected, and out of the way. This is a good snap fit onto the extrusion. I designed the original for use around the Logitech C922 Pro but it…
My extruder crashes into the original model, so I mirrored it so the bracket holds the camera far enough away from the build zone to avoid said crashing. Nothin' crazy here. Hang the webcam upside down, zip-tie it so it doesn't unfold,…
This keeps the retention tab of the c922 out of the way so it sits on the border rather than your actual screen space. It also just snaps onto the webcam, reducing the possibility of losing it. This was designed originally for an LG…
Printed with PETG .2 mm layer height with tree supports auto to support the horizontal sections. After printing I realized that I could have printed it with the "make overhangs printable to increase strength and reduce waste.
I remixed the excellent Logitech C920 (or C922) mount and added an element from my IKEA HALVKLART LED light bracket so you can now hold the webcam and LED light together, with a little cable tidy for good measure.
This is just a remix to support a flat LED halo ring aka angel eye with a diameter of 75mm. See remix source for further details. The groove for the ring has a width of 4.5mm and a depth of 2.5mm. Print Settings Printer Brand: Anycubic…
For your consideration is a simple mount for a Logitech C922 webcam for Wanhao Duplicator 6 / Monoprice Maker Ultimate printer (for the printer's left side). The mount fits into the top case slots and allows the camera to hang on the side…
This project was created for Rouen Normandy University in France. The Purpose is to use Zebra ZXP Series 3 to write NFC previously printed card after a QRcode check. QRcode is read with a C922 Pro Logitech Camera. The camera is held in…
You have a Drybox from @OndrejStritesky and the PTFE Tube Roller from @Jer_399922 and want a tray for the silica gel that fits? There you go.
This was my quick design of a webcam cover for my Logitech C922x webcam. It certainly doesn't have the most beautiful "form" but it certainly is functional, and is easy to put on and remove. Improve your privacy for just a little bit of…
It takes two M3 16mm screws to put it together (though you may be able to use the original C270 pin for the camera mount part) and slides onto the stock ender 3 frame. You only need to print the Stem and Arm (The bracket STL is just an…
If you break your stamp or just want to change the colour of the shell, here is an imitation of the original top shell (haven't made the cap for the bottom yet) It's a good place to start if you want to make a different shaped case too…
Hallo! Hier wird ein Case für den FPV Diversity Empfänger HB5808 von Quanum angeboten. Es besteht aus mehreren Teilen da auch der Empfänger aus zwei Funkmodulen die über ein Kabel verbunden sind besteht.…
Part Identification Primary Function: Trunk/Boot Trim Element (specifically often identified as the Tailgate/Liftgate hinge cover or lock trim ). Material: Black plastic. Common Locations: * Covers the hinges or latch mechanism on the…
Simple gap filler for a Socket Saver to a 6SN7/6922 adapter for my Schiit Vali 2 tube headphone amplifier. My socket saver & adapter are from Tube Depot, but my guess is all are the same no matter where you get them from. Print Settings…
Replacement of the original support column (part no. 922-1643), which tends to crumble after the years. Print in the default orientation (fins on top) and use supports.
GeoCaching 922: Cube-Adapter - KSW22 - M6-Mount - Höhe 10-24mm 9 Modelle: 922-10 - Cube KSW22 - Bohrung Ø6.2 - Höhe 10mm 922-12 - Cube KSW22 - 4kt oder 6kt Mutter - Höhe 12.5mm 922-15 - Cube KSW22 - 4kt oder 6kt Mutter - Höhe 15mm 922-20…
On my LG refrigerator door bin, the pegs that hold the bin into the door insert broke off. I modeled the bin and the print fits as a perfect replacement! This JUST BARELY fits on the QIDI Plus4 print bed. If your bed is smaller than…
Here is a tray to keep your E-Torx Ratcheting Wrench tool kit (GearWrench 9224D) organized. Use a rubbery type filament material, like TPU or TPE to avoid scratching the chrome. Change filament color after 35mm to get contrast and easy to…
This is a bit of a niche design for using a riser cable to move the LSI 9220 8i HBA to another location in the chassis. This requires your own riser cable (approx 30cm long) and some brass inserts. This is designed to work in the…
Approximately 700mm long model of the MZKT launcher. The model has 8 axles of which the first two are steering and the last 3 are steering on the opposite side, on the back there is the rotation control system. The silo can be held in a…
It takes two M3 16mm screws to put it together (though you may be able to use the original C270 pin for the camera mount part) and slides onto the stock ender 3 frame. You only need to print the Stem and Arm (The bracket STL is just an…
GeoCaching 922: Cube-Adapter - KSW22 - M6-Mount - Höhe 10-24mm 9 Modelle: 922-10 - Cube KSW22 - Bohrung Ø6.2 - Höhe 10mm 922-12 - Cube KSW22 - 4kt oder 6kt Mutter - Höhe 12.5mm 922-15 - Cube KSW22 - 4kt oder 6kt Mutter - Höhe 15mm 922-20…
On my LG refrigerator door bin, the pegs that hold the bin into the door insert broke off. I modeled the bin and the print fits as a perfect replacement! This JUST BARELY fits on the QIDI Plus4 print bed. If your bed is smaller than…
Here is a tray to keep your E-Torx Ratcheting Wrench tool kit (GearWrench 9224D) organized. Use a rubbery type filament material, like TPU or TPE to avoid scratching the chrome. Change filament color after 35mm to get contrast and easy to…
Heckspoiler für Carrera Porsche 911 GT3 R (922) im Maßstab 1:32 Das Modell ist von seiner Form nicht identisch zum originalen Spoiler von Carrera und auch nicht so filigran. Er wurde so konstruiert, dass er, insbesondere an den…
This model is compatible with the lego system.
The design is so simple - no explanation needed on how to print this I guess. No moving parts.
Every time I am moving or disassembling my Ikea Elvarli shelf, a few of these gets broken in the process. This time, I finally realized that it is simple enough to be 3D printed new part. Traced some pictures and created an STL file. The…
CZ Scorpion 922R Parts - Please note, I do not warranty or guarantee them. Download and use at your own risk. Category: Sport & Outdoors
This model is compatible with the lego system.
This model is compatible with the lego system.
Hallo! Das ist ein Case für das Eachine ER32 5,8 gHz RX Modul von Banggood, angepasst für die Videobrille Fatshark RCV 922 Base. Empfänger: http://www.banggood.com/Eachine-ER32-5_8G-32CH-Wireless-AV-Mini-Receiver-p-1007771.html Da ich in…
This models are just extentions for https://www.thingiverse.com/thing:4625988 . Category: Camera
Repait kit for broken Hanza HJ-922 lock.
For Fatshark RCV922 Aviator. Modded to plug in other receivers. Designed a cover for the RX in Fusion360 F360 source: http://a360.co/2yLZIpi Print instructions 3 perimeters
I remixed the design to have a 24-LED Version suitable for, e.g., this Ring: https://www.amazon.de/dp/B07GF2MK54/ref=cm_sw_em_r_mt_dp_U_wwSOEbFNSJ4YP the overall ring diameter is a bit smaller than the original but they fit more LEDs onto…
For the Milwaukee 48-32-9922 Customizable Large Case (One of Milwaukee's newer cases that fit Packout systems - not a Shockwave case). Grid-like structure to hold Dremel Bits. Small tab on the bottom of the insert to make it easier to…
This 1921 Model T truck is made of parts that press fit together. You can send it with your Christmas card. You can add a wire hook in the roof to hang it from the Christmas tree. My Wife thinks it's not very Christmasie, but I like it. I…
For Fatshark RCV922 Aviator. Modded to plug in other receivers. Designed a cover for the RX in Fusion360
Chain was sagging from the joint on the extruder, made this little nugget to fix that.
This is a replacement key for a Kohler standby generator and many other devices. This was an exercise to create an attractive and functional item using basic OpenSCAD constructs. UPDATE: Added a wall mount, use double-sided tape to attach…
El primer escudo del club de mis amores Instructions El tamaño estandar es de cerca de 10 cm con un relieve de 6 mm dividido en 2. Category: Sport & Outdoors
This simply sits under the camera and on top of the monitor, the slight bend of the camera arm will hold it in place, but it doesn't secure to the camera directly. It will lift the camera up enough to clear a thin bezel monitor while…
