Wyniki wyszukiwania: akim

Hueforge Makima NSFW

Makima and Denji from Chainsaw man

Makima and Denji from chainsaw man. Print Settings Printer: Creality LD-006 Resin 3D Printer Rafts: Yes Supports: Yes Category: People

Makima wall art

Took the stencil from Thingiverse and added a backdrop in BambuLabs for contrast.

Yakima Roof Rack End Cap

Lost an end cap for the Yakima roof rack. Could have bought a replacement cap for $5, but where's the fun in that?!? Printed in PETG, no supports. Fits as snug as the original. Added a simple design pattern but could easily be removed if…

Yakima JetStream Roof Rack End Cap Replacements

Did your end caps fly off somewhere along a long country road? Don't want to spend $5 to buy replacement end caps for your Yakima JetStream roof rack? I didn't either! These are designed as a replacement based on the original model that…

Makima linda y sexy

Makima sexy

Yakima SKS Control Key

3D printable "uncut" control key used only for the removal and installation of an unlocked Yakima SKS core. Any rigid material should work. I recommend printing with a 0.15mm layer height . Remove the integrated support after printing (no…

Makima HueForge

hey! i made this Hueforge makima san small poster card it uses 3 multicolor filament changes. i printed this on ender 3 using cura with standard 0.4 mm nozzle Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm…

Makima (HueForge)

Happy printing ! Printing instructions: Print at 100% infill with a layer height of 0.06mm with a base layer of 0.1mm. Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Prusament Lipstick Red Transmission…

Dip pen - Jowo #6 Kakimori style

Intended for resin printing. It writes a bit dry and has higher feedback than metal or glass pens, but it's much easier to replace.

Makima evening dress

AI generated fanart of Makima, in evening black dress. Sculpted in Blender.

Makima - Chainsaw Man

makima from chainsaw man made with ai.

Yakima Key A133

Key for Yakima SKS lock with code A133 Based on Yakima control key design

Takimorph Dragon

Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Version three is the cave. Help support my design work by visiting my referral links: Upland referral (virtual property…

Yakima Key A155

Key for Yakima SKS lock with code A155 Based on Yakima control key design

Yakima Bike Rack End for Car Roof Rack

For best results print on the flat face. I intentionally designed it so the layers are at an angle to the stresses. The clip would break otherwise.

Dr. Hakim - It Takes Two

I wanted to make this for my friend for the holidays, so I created it with some help from meshy AI. I painted it (I'm quite an amateur as you'll see in the photos), and am quite pleased with how it came out. Happy printing!

Thick Lady Arms Akimbo Female Figure 3D Printable

Bring bold confidence to your space with this striking 3D printable female figurine that commands attention with her powerful stance. This beautifully detailed STL model showcases a curvaceous woman in a classic arms akimbo pose, perfect…

Yakima End Caps Left & Right GCode & STL Files

I lost one of the end caps on my Yakima rack and found a file online to 3D Print, but it did not fit and only offered one side. I decided to design something in 360 and they did not turn out so bad at all. I printed both side and they fit…

Brutal Makima

Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black Intense red 9 light brown/orange 11 pink 12 white 23 for the fifth color put ams slot 1

Thule-Yakima ski rack mount

I needed mounts to fit my Yakima ("powderhound" style) ski racks onto my older Thule load bars (LB50 rectangular bars). Zip ties worked OK but didn't hold up well when temps got below -20F and they couldn't make it through the car wash.…

Yakima JustClick T3 / whispbar T3 licence plate holder

I make this for Yakima JustClick T3 / whispbar T3 licence plate holder. Is holder for licence plate for bicycle holder. I brogen this original one. Printed on side for better strenght. Not print in position wich is on photo. Printed with…

Rivian Crossbar Spacers for Yakima FatCat Ski Racks

Create spacers to allow the Yakima FatCat ski racks to be mounted to a Rivian crossbar with stainless T-Nuts. Used the following T-Nuts from Amazon. 6mm x35mm https://www.amazon.com/dp/B09TYS712R?ref=fed_asin_title&th=1&psc=1 The notched…

Rugged Box for Rooftop Tent Parts + Yakima Torque Driver + Wrench

Storage Box for Rooftop Tent Parts + Yakima Torque Driver + Wrench 6 M3 x 30mm bolts or set screws are needed to assemble the hinges Custom inserts to fit the Antidote Studio RTT mounting metal bars and M8-1.25 (5/16" - 18 x 2") bolts.…

Yakima Ski Rack Mount for Rivian Crossbars

I modified this Yakima adaptor to work with the bulky Rivian OEM cross bars by assembling it with the mount created by Tinker86 on Thinkgiverse (https://www.thingiverse.com/thing:6533914). It is designed to be used with standard insects T…

Yakima Holdup 2 Licence plate and lights mount

There's no obvious location to attach a licence plate or lights to the Yakima Holdup 2. This adds some holes to mount stuff to. 2x M8 nuts and 2x M6 nuts required. The nut holders go behind the bottle opener. f3d files included for you to…

Yakima FullSwing Removable Number Licence plate Adaptor

Replace the bottle opener on your Yakima FullSwing bike rack with a removable number plate adaptor. Only post processing steps required is to install the 4x M5 heat set inserts. I used CNC Kitchens. Optionally I have provided 2x 25x10x3mm…

Yakima Hitch-Mounted Bike Rack Wrench Adapter

This adapter slips over a Yakima SpeedKnob tightening knob, adding a ¾" hex bolt that you can attach a wrench to for greater leverage. Tested and works perfectly on a Yakima RidgeBack hitch bike mount that was firmly stuck in my hitch and…

Yakima Baseline Foot 5022713

I designed this in SolidWorks to replace a missing Yakima Rack foot. it works perfectly. photos show original next to 3d print

Do Not Disturb Sign - Dakimakura cuddling

For all weebs who don't have a girlfriend

Yakima HoldUp Bike & Hitch Lock Covers

I recently purchased a Yakima HoldUp bike rack and wasn't satisfied with the locks' protection from the elements. The locks have a sliding metal door in front of the keyhole meant to keep water out, but realistically it's not much…

Yakima round bar bracket

Simple bracket for an older Yakima round bar system. Print in something weatherproof. I used PETG.

Kakimori Pen Back Cap V3

Originally the pen is meant to be single used. Its possible to refill it through the felt tip. With the new back cap its possible to be refilled. Printed with flex filament and no infill.

YAKIMA JLow Kayak Rack Holder Wall Hook

Wall hook for Yakima JLow. Probably fits many other Kayak Racks such as the Thule or any other that are similar in styles. Quick and easy print. Versions: V1 First upload (23-Sept-2025) Print Instructions: Print on its side In the slicer,…

ChainSawMan_Makima

Project: Makima.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 160x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual…

Yakima Stage Two Bike Rack Bump Stop Bash Guard

Replacement for yakima part #8881401. Uses two m6 bolts to mount. Recommend printing ABS or PETG. Print 100% infill so it's still solid if it wears away. Model in picture was printed with a .6mm nozzle .3mm layer height with PETG-CF.

Yakima Round Bar Gunnel (gunwale) grabber

Onshape model Use TPU, wrap it on the round bar with the long leg pointing upwind (front of the vehicle). Slide to the width your canoe needs, strap it down with a good strap. NRS strap not required but they sure are nice! My print…

Yakima SKS Replacement Core

Allows you to latch/unlatch your SKS rack or accessory with a simple flat-bladed screwdriver. Engages the cam mechanism in the back of the SKS recess to do that. Removable from the SKS recess with some sort of hooked device like a lock…

Yakima Keychain

Made an Yakima branded keychain for my SKS keys. This helps make them easier to keep track of. You can pick from a keychain that is cutout which I found is easier to see the logo or you can make one that does not have the logo cut out.

Dakimakura Wall Scroll

In addition to the printed parts, you will need: 5x5x5mm magnets A piece of string The bottom piece is optional, but it definitely makes the whole thing look better and also serves as a weight; for that part, just 4 magnets are sufficient.

Kaori Makimura( City hunter )

🔥 Laura – City Hunter | Figurine style Chibi / Vinyl Voici ma version de Laura (Kaori Makimura), l’acolyte incontourna

Yakima canoe load Stop

Yakima canoe load Stop. Printing for first time now. Needs more iterations.

Old Yakima Hub Key

I bought this used Bike Rack and I broke it on the first day. Made it so I can use it. Hope this helps someone too.

Hueforge Makima NSFW

Project: Makima Whore Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 145.97x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the…

Yakima License Plate Flipper

Look... It's not great... but it's a start... I'll try to make it better and update here when i do.

Yakima Roof Rack End Caps

Custom caps for the Yakima car rack. The theme is kayaking. I print them with no support and face down, with 2 filament changes to provide the 2 color prints. The picture showing them face up is just for displaying options. I've also…

Rakits Rakimix 5 basic base/case

Someone on Thingiverse did a remix of this so you might also want to check that out, but in the meantime I'm porting my stuff over to here so it's more available

Tesla cross bar adapter for Yakima bike rack

Adapter for Tesla roof rack cross bar (I have a 2023 Model Y) to allow me to mount a Yakima bike rack. Also included are some spacers that ensure the front wheel holder is in the right position when its up. They mount to the bar with a…

Yakima License Plate Flipper

Look... It's not great... but it's a start... I'll try to make it better and update here when i do.

Yakima Holdup Light Board adapter

I needed a better way to attach a Thule light board to my US Yakima Hold-Up bike rack. So, I designed these brackets. I printed in PETG at 80% fill for high strength. You'll also need: -30.5 x 40.5 mm rectangular steel tube stock…

Keychain PrůšaKim MEME

Keychain meme - Josef Průša (PRUSA Research) vs Kim Čong-un (KLDR)

Hueforge Makima NSFW

Project: Makima.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual…

Hueforge Makima Cum In Mouth NSFW

Project: Makima Cum In Mouth.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.33x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm…

End Cap for Yakima Two Timer Bike Racks

Ever lose the top cap on your Yakima Two Timer bike rack but you don't want to pay $4.00 plus $10.00 shipping to get a new one? Now you can just print one! https://yakima.com/products/tray-rack-mast-cap #8890296

Yakima License Plate Flipper - Grumpy's Remix

Grumpy's Remix of Pure Goof's Yakima License Plate Flipper. No longer a flapper! The plate is made to fit my local bike rack plate size (ACT, AU), and is designed to lock into position in both the upright and down positions of the Yakima…

Yakima Bike Rack Light & Number Plate Tag Bracket

Simple hinged brackets so you can attach tail lights and a number plate (or tag if you're in the USA) to the Yakima Bike Rack. Where I live you are required to have lights and a number plate on the rack by law; or you risk getting a…

Yakima Roof Rack Cap v2

New Version: There has been no problems with the original version as of yet. It has survived a hot summer and still going strong. However, after printing and installing, there were a few tweaks I wanted to make. The end edges that wrap…

Grommet for Akimbo

Keeps the carabiner from side loading. I made this for the Akimbo device. It also works for other devices. Print Settings Printer Brand: Sovol Printer: SV06 Plus Rafts: No Supports: Yes Resolution: .2mm Infill: 100% Filament: Overture TPU

Yakima Track NMO Antenna Mount

Requires: 2x T-slot bolts, washers and nylock nuts (https://www.amazon.com/gp/product/B0BNQW7PCN) NMO Antenna Mount ((https://www.amazon.com/gp/product/B012E4AM7U)) Print Settings: 0.6mm CHT nozzle 0.4mm layer height Polymaker PA6-CF…

Yakima Key A136

Key for Yakima SKS lock with code A136 Based on Yakima control key design

Makima - chainsaw man - hueforge

Makima from chainsaw man is the awesome Hueforge print This Hueforge uses 3 colours. please dont adjust the Z height Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #18 (1.52mm) swap to White