Wyniki wyszukiwania: angers

Sortowanie

616 modeli

P
PrintablesGreatOldOne

Milwaukee Tool Hangers

3 simple hangers for a Milwaukee Fuel 18V tools. No supports required. Tool Hanger V2 - good for the multi-tool Wider Tool Hanger - slightly wider version of the original V2 part, good for 115mm angle grinder Jigsaw hanger - good for the…

Pobrania
1579
Polubienia
348
Ocena
5

Miniature Rack & Hangers For Earrings

I needed a cute little way to display some earrings, so I came up with this. As the summary says, it's a 3-piece miniature rack with two models of hangers. The two pieces that make up the rack itself are the "rack core" and the "braket".…

Pobrania
481
Polubienia
147
Ocena
5
P
PrintablesRoger Thomas

Shorter Christmas light hangers ( clips ) for a house

I created this to attach to the side of my house (where there isn't guttering) to hang our Christmas lights up (Merry Christmas by the way!). This is an alternative of my taller hanger with 2 screw holes. The picture shows the various…

Pobrania
368
Polubienia
31
Ocena
5
P
PrintablesDSpecter

Wall Shelf with Coat Hangers

Hello everyone, this is my submission for the wall hook competition! My aim with this design was to create something that could be both useful but also nice to look at so that it blends in with the area it is installed. Dimensions are 180…

Pobrania
205
Polubienia
66
Ocena
0
P
PrintablesAureusKhan

LEGO Vehicle Wall Hangers

Quick solution to hang LEGO vehicles on your wall by their wheels. I've seen others hang their cars but not by the wheels so I made this. I have designed the following hooks (the numbers can be found on the tires of the vehicle you want…

Pobrania
193
Polubienia
43
Ocena
5
P
PrintablesAnthony_v_W

Coat hook with holes for coat hangers

This hook has holes for additional coat hangers.

Pobrania
175
Polubienia
34
Ocena
0
P

Power Brick Hangers (Kessil, Varios, COR-20)

Minimal hangers for power bricks. Kessil A360X Reef Octopus Varios 2 Neptune COR-20 Updated to have more room for screw heads. Print instructions Prusa Slicer defaults w/ supports everywhere PLA will eventually warp from heat. PETG avoids…

Pobrania
167
Polubienia
15
Ocena
0
P
PrintablesElvoc

BJD Hangers

A set of hangers that are ⅓ scale for smartdolls and other bjd clothes. The ring hanger is very useful for underwear, scarfs, stockings etc. I used a 0.6 nozzle and 0.30mm layer height to print.

Pobrania
166
Polubienia
29
Ocena
5
P
PrintablesTperroneDesign

New York Rangers 3D Logo

I made a 3D New York Rangers Logo. The Blue White STL requires print pauses to change colors. Blue first, then white, then blue, and than white. The Red STL gets printed separately and then glued on. Share a picture if you print one!

Pobrania
131
Polubienia
15
Ocena
5
P
PrintablesROK

Picture hangers

Those small (4cmx3cm) tags can be glued to the back of any frame or e.g. wooden plate that you want to hang on your wall. They'll provide enough surface so they hold well while being glued but anyways need close to no material and don't…

Pobrania
131
Polubienia
34
Ocena
5
P
Printablesjoka67

Hangers for green house

Twist on hangers for the greenhouse. To put strings through, or just to hang things on. There are three variants included. As the temperature can be high in the green house, PETG is to prefer. Printed in an 45° angle as in the picture,…

Pobrania
110
Polubienia
15
Ocena
5
P
PrintablesThe Lou Kou

kitchen hangers

Simple kitchen tool hangers, in really small size. Attach to wall with good double sided tape (i.e. 3M VHB tape) Provided Gcode is for PETG, set of both hanger sizes

Pobrania
71
Polubienia
19
Ocena
5
P
PrintablesAinon3Dtisk

Holders, hangers for weapons and more

Hello, Welcome to my profile, full of models and miniatures :-) I have for you Holders, gun hangers and others. For wall mounting or wooden cladding. You have 4 sizes from me: 60mm, 70mm, 80mm and 90mm. Just choose the color, material and…

Pobrania
41
Polubienia
8
Ocena
0
P
PrintablesLegufix

triple heart ear hangers

Inspired by my triple cube ear hangers, I designed an entry for the 2025 Valentine's Day competition. (see https://www.printables.com/model/1109271-triple-cube-ear-hangers) The 3 different sized hearts are printed with a 0.25mm nozzle. I…

Pobrania
34
Polubienia
4
Ocena
0
P
PrintablesKlaus Krämer

Ausgleichsaufhänger für Bilderrahmen / Leveling Hangers For Picture Frames

Bei Bildern, die in exakt gleicher Höhe hängen sollen oder Bildern, die mit 2 Aufhängern aufliegen sollen, hilft das kleine Gadget, sie exakt waagerecht auszurichten. Nicht immer läuft der Bohrer ja exakt dort in die Wand, wo man möchte…

Pobrania
32
Polubienia
7
Ocena
0
P
Printablesphilipp900

hangers for mud kitchen

i needed some hangers for my sons outdoor mud kitchen so i created one since i have a prusa mini the possibilities are endless!!!! :) https://makerworld.com/en/models/486830#profileId-399654

Pobrania
20
Polubienia
3
Ocena
0

Wall Hangers

A selection of wall hangers for various uses including: - Backpacks - Household Fire Extinguishers - Headphones - Cables

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesParsingphase

Hangers for cord-supported lanterns

Needed a solution to hang various paper lanterns that hang from their cables - these support the cable by friction fit and allow the lantern to be hung from a thin wire or a screw mount. (NB: screw mount is untested) Obviously - these are…

Pobrania
15
Polubienia
4
Ocena
0
P
Printablesrrocketmann
Pobrania
14
Polubienia
3
Ocena
0
P
PrintablesPrusa Guy

Pegboard system hangers

all parts is printed from PETG on default 0,2 quality settings in slicer.

Pobrania
9951
Polubienia
3585
Ocena
4,89
P
PrintablesLoboCNC

Head Bangers

These guys are always butting heads, especially when debating Newtonian physics. They're an inverted version of the classic Newton's Cradle demonstration of conservation of momentum and energy. But why is the middle spring so much…

Pobrania
5324
Polubienia
1455
Ocena
4,74
P
PrintablesC1RKT

Rugged Shoe Clip Hangers

A supper strong option to keep your footwear off the ground! This shoe hanger is designed to fit most shoes including your flip-flops! Here's a cool cost-effective remix by @PRIma:…

Pobrania
3623
Polubienia
1780
Ocena
4,97
P
PrintablesRepoholy

Earring stand: Rack with hangers

A must-have for every earring lover and displayer. If you love your earrings and love to change them and love to just look at them (as you should, queen), this is THE earring stand for you. It fits as many earrings as you want. And if you…

Pobrania
2007
Polubienia
313
Ocena
4,86
P
PrintablesDragon_Unknown

Power Rangers Morphers

Power Rangers Morphers from TV show 1993

Pobrania
1720
Polubienia
170
Ocena
4,8
P
PrintablesJace1969

Power Rangers

Another batch of files found saved in my old collection archives. I think these were originally done by a guy called BeattleJuice as .PDO's. Don't Quote me on that. Any way, not sure of the sizing either. So if you do slice these up to…

Pobrania
981
Polubienia
121
Ocena
0
P
PrintablesSy5T3m4TiC

Customizable Shoe Wall Storage Hangers [mounted-from-the-back-edition]

Intro: Finally you can hang your dirty shoes from the wall in a nice way! With this model i tried to hang the shoes on the wall without clamping or indenting the front part of the shoe or waste to much space on the wall. So the hook…

Pobrania
738
Polubienia
252
Ocena
5
P
Printablesnitromodel

Sprocket wall Hangers Suzuki, Honda, Kawasaki, KTM, and Yamaha

I made these on my Mini Prusa +. They take about 7 hours to make each. They are about 7" in diameter and 0.300" thick. The Yamaha sprocket will need supports for the name. I will be working on others and will be doing a clock one as well.…

Pobrania
729
Polubienia
105
Ocena
5
P
PrintablesDrew

Makita LXT 18V drill/driver hangers - expanded!

Designed for Makita DHP482 drill and DTD152 impact driver. Will probably fit many other Makita tools and others, 64mm inside diameter. Added several more sizes to fit bigger tools: 68mm, 72mm, 76mm. Added a 72mm “square” holder to…

Pobrania
726
Polubienia
109
Ocena
4,94
P
Printables3D Rejsen

12 Snowflake ornaments tree hangers

12 Snowflake ornaments tree hangers

Pobrania
723
Polubienia
160
Ocena
4,5
P
PrintablesPhaedrux

Bee Hive Frame Hangers

I made a set of hive hooks for a friend of mine. They are used when doing a hive inspection. They hang off the front of the hive and act as hangers for up to 2 frames so you don't have to set them on the ground. If you end up printing and…

Pobrania
668
Polubienia
99
Ocena
4,83

Milwaukee Packout Hangers

Utilized Davemoneysign's model to make a packout hanger with a gap to slot in a machined screw + nut to hang non-packout items.

Pobrania
668
Polubienia
155
Ocena
5

Milwaukee Packout Hangers v2

Milwaukee packout mounts that can be attached to various things with screws. I've noticed that even in the worst layer line configuration, it's still very strong. If we have all our bikes out, I use three attached to a piece of 2x4 and a…

Pobrania
656
Polubienia
111
Ocena
5
P
PrintablesTDCN

Tessa/3M Command strips wall hangers hook for pictures and photos

a clone of the original wall hangers from tessa but in a 3d print friendly design.

Pobrania
582
Polubienia
55
Ocena
5
P
Printablesdarious

Hearts Head Bangers

This is the Remix Head Bangers by LoboCNC https://www.printables.com/pl/model/316656-head-bangers

Pobrania
576
Polubienia
49
Ocena
0
P
PrintablesXDGunFire

PVC Pipe, conduit, and copper pipe clamp hangers / Clip / Mount. ½" - 2"

PVC, conduit, and copper pipe clamping hangers. ½" - 2" Lock your line in faster than any other hanger. These hangers automatically close when you press your line into the clamp. They have an unthreaded hole for mounting with a fastener.…

Pobrania
545
Polubienia
66
Ocena
5

Zone Rangers

"Get out of here stalker." This is a set of parts to build 28mm miniatures suitable for skirmish games such as Zona Alfa and This Is Not a Test. They are scaled by default to Stargrave miniatures. Warhammer 40k miniatures will likely be…

Pobrania
534
Polubienia
65
Ocena
0
P

Clothes Hangers, Connecting Hooks, Cascading Hangers, Hooks for Hangers, Clothes Hangers, Hooks

Stackable clothes hanger connection hooks can be used to hang on one clothes rack to connect the next.

Pobrania
529
Polubienia
103
Ocena
4,67
P
PrintablesJace1969

Power Rangers Dino Helmet

Gidday Musa, Here is that helmet you were after? Or at least I think it was what you wanted ; ) Cheers Jace

Pobrania
508
Polubienia
91
Ocena
0
P
PrintablesKk 310

RC Airplane Hangers

This is a simple way to hang RC airplanes from the ceiling and prevent the hanger rash that kills planes.

Pobrania
487
Polubienia
66
Ocena
0
P
PrintablesFredslund

Makita Battery Hangers

the model can be printed in any material, but it should be printed with thick walls. supports are needed but the 3mf file is made with minimum amount of support.

Pobrania
476
Polubienia
53
Ocena
5
P
Printablesrrauenza

Wall Control Pegboard Tool Hangers

This is the beginning of a project to make tool holders that work with Wall Control peg boards. 3D printing pegboard accessories wasn't very successful for me, particularly with a metal pegboard -- the pegs would snag and break too easily…

Pobrania
463
Polubienia
85
Ocena
5
P
Printablesnerdyviews

Power Rangers Coaster & Coins

To celebrate the 31st Anniversary of Mighy Morphin' Power Rangers, here's a coaster I designed with different coins for each of the original Dinozords. The coins slot into the base.

Pobrania
460
Polubienia
57
Ocena
5
P
PrintablesKodagraphy

Xbox One/Core Controller Wall Mounts/Hangers

An easy to print wall-mounted hanger for the Xbox One and Xbox Core controller bodies. Designed to fit both large and medium size Command Strip wall adhesives. Can also be mounted using screws or picture-hanging nails Requires zero…

Pobrania
425
Polubienia
52
Ocena
5
P
PrintablesEmoticon Fury

Air tool \ Pneumatic tool hangers, quick to print! Low filament use! No supports!

I looked at other models people had made to hold air tools. I wanted one that held the tools at and angle so they don't have a chance to fall out of the holder, so I designed this. It looks small and like it won't take a lot of weight,…

Pobrania
369
Polubienia
44
Ocena
4,8

power rangers wild force crysral saber

there are a few details that are missing if you are gonna print it scale it to 10%

Pobrania
361
Polubienia
58
Ocena
0
P
PrintablesLegufix

triple cube (ear) hangers

I had a similar experience like @unwohlpol and looked for a corresponding 3D model. Because I wanted the arrangement of the cubes to be slightly different, I created a remix. A 0.25mm nozzle, a small brim and organic supports worked well…

Pobrania
356
Polubienia
95
Ocena
5
P
PrintablesAdrian

Sun and Moon Wall Hangers

Stylized Sun/Moon/Stars wall hangers. Hooks/pegs printed separately. Wall mountable with standard drywall screws. Remixed from: https://www.thingiverse.com/thing:4308762 Print Settings Printer Brand: Anycubic Printer: i3 Mega X Rafts: No…

Pobrania
356
Polubienia
101
Ocena
5

Space-saving clothes hangers models

Space-saving hangers. The published models save from 2 cm to 18 cm over a normal sling bar of 200 mm length (also published). And look the commemt below stl The total length of the hanger is given by the diagonal of the bed of 300x300,…

Pobrania
344
Polubienia
60
Ocena
4,67
P
Printableskeebs

Guide Rail Wall Hangers for Makita Plunge Saw Tracks

These wall hangers hold either one or two Makita guide rails (tracks) for your Makita plunge saw (track saw) Includes counter sunk holes for #4 (4.0mm) screws to fix to the wall. IMPORTANT: The longer of the two hooks must go at the top…

Pobrania
340
Polubienia
47
Ocena
5
P
PrintableszAbso

Power Rangers Ninja Storm Ninja Sword

Print Settings Sword Wall loops: 2 Layer Height: 0.2mm Infill: 8% Sparse infill pattern: Grid Support: Tree Brim Type: Outer brim only I only use this for parts 1, 2, and 3 of the sword. Sheath Wall loops: 2 Layer Height: 0.2mm I…

Pobrania
317
Polubienia
54
Ocena
0
P
Printablesshermluge

Yard Tool Hooks/Hangers

Updated 9/8/19 - Heavy duty hooks now comes with a washer hole to increase strength. double hook for rake, shovel, etc. Enjoy Sherm Other creations: https://www.printables.com/@shermluge_65353/models…

Pobrania
308
Polubienia
58
Ocena
5
P
PrintablesTheNextDecade

Dekaranger / Power Rangers SPD Badge

Badge from Dekaranger / Power Rangers SPD If you are interested in more tokusatsu themed 3d print files like Henshin belts, check out my etsy, patreon and website! Feel free to message me with model suggestions here or over on my website.…

Pobrania
306
Polubienia
31
Ocena
0
P
PrintablesGbutton

Earthborne Rangers Organizers - More Sizes

Based on Earthborne Rangers - Organizer by CaseW0Lf (https://www.thingiverse.com/thing:6187016).

Pobrania
298
Polubienia
31
Ocena
5
P
PrintablesReminds

Magnetic Poster Hangers

Model Corner mounts for posters that hold the poster in place via friction. That way the poster can later be removed from it's mount without having any cosmetic defects, or be swapped for another same sized poster with ease. The holders…

Pobrania
285
Polubienia
81
Ocena
5
P
PrintablesJoe

Power Rangers sign

Power Rangers sign Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…

Pobrania
284
Polubienia
32
Ocena
0
P
PrintableszAbso

Power Rangers SPD Delta Blasters

Print Settings Wall loops: 2 Layer Height: 0.2mm Infill: 3% Sparse infill pattern: Grid I used Gyroid infill on the car_hood parts to help with the area around the trigger Support: Tree Brim Type: Mouse ear I use an Outer Brim on the…

Pobrania
282
Polubienia
30
Ocena
0
P
PrintablesShahaf Yehuda

Sword wall hangers

Print two for both sides of the sword use at your own risk (make sure the sword isn't to heavy) and obviously use proper screws i used 20% infill PLA

Pobrania
274
Polubienia
29
Ocena
5

Cable and Test Lead Hangers

These are a bit unusual, but suited my needs. I wanted something that could span across my glass office door, so I designed these with a 1.0 in x 0.125 in (25.4 mm x 3.2 mm) channel through the back. This allowed me to use 1" x 1/8" flat…

Pobrania
271
Polubienia
37
Ocena
5
P
PrintablesSwotariCZ

Power Rangers

10cm vysoký model Power Rangers

Pobrania
269
Polubienia
32
Ocena
0
P
PrintablesFelix

Earthborne Rangers Boardgame Token Box

The box contains 4 smaller trays. Two for all the game tokens and two for the energy tokens besides the aspect cards (easier management and no displaced tokens). Print: 1x “ebr_box_lid” 2x “ebr_ins1” 2x "ebr_ins2" Printed on Creality 6-SE…

Pobrania
267
Polubienia
19
Ocena
5
P
PrintableszAbso

Power Rangers Ninja Storm Samurai Saber

Print Settings Sword Wall loops: 2 Layer Height: 0.2mm Infill: 7% Sparse infill pattern: Grid Support: Tree Brim Type: Outer brim only Sheath Wall loops: 2 Layer Height: 0.2mm Infill: 5% or lower Sparse infill pattern: Grid Support: Tree…

Pobrania
266
Polubienia
48
Ocena
5
P
Printablesxanatorium

wallet shelf with key hangers

I needed a small shelf next to my door where I could put my purse the car card and my keys. So I designed this, it has a side for my wife and one for me. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution:…

Pobrania
264
Polubienia
18
Ocena
5
P
PrintablesMadMax

Coat Hanger Cozy - Parametric Double Extender For Coat Hangers

A simple double-extender for coat hangers. Simple print, no supports required. Parametric design for the thickness of the hanger. Works with wire and plastic coat hangers. Fusion file and 2 .stls for 5mm wire and 9mm plastic hangers. To…

Pobrania
252
Polubienia
36
Ocena
5
P
PrintablesLayerModels

Letter Coat Hangers

These letter coat hangers can be used to make names or words. No more boring coat hooks with your custom 3D printed hangers! Files includes all letters of the alphabet in the standard font. Other fonts are available here If you like my…

Pobrania
244
Polubienia
49
Ocena
0
P
PrintablesTheNextDecade

Shinkenger / Power Rangers Samurai Logo

Emblem and logo from Shinkenger / Power Rangers Samurai If you are interested in more tokusatsu themed 3d print files like Henshin belts, check out my etsy, patreon and website! Feel free to message me with model suggestions here or over…

Pobrania
239
Polubienia
30
Ocena
0
P
PrintablesJoe

Power Rangers - Green Ranger

Power Rangers - Green Ranger Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…

Pobrania
236
Polubienia
22
Ocena
0
P
PrintablesJohn L.

Ryobi GearTrack Tool Hangers

Model to hang Ryobi tools from Gladiator Geartrack / Gearwall . If they are going to be in a hot environment like a shed you will need to print them in PETG if in an insulated garage that does not get too hot and is not in direct sunlight…

Pobrania
235
Polubienia
50
Ocena
0
P
PrintablesPhylius

Ikea Chair coat hangers

Ikea Chair coat hangers I made based of off an image from reddit... Original photo is from reddit post: https://www.reddit.com/r/mildlyinteresting/comments/18e7h9v/coat_hangers_in_the_public_toilet_at_my_local/

Pobrania
231
Polubienia
44
Ocena
0

Mighty Morphin Dummy Rangers - Red

I’ve created a remix of the Dummy 13, transforming it into a Mighty Morphin Power Ranger! The model is organized with pieces separated into folders by color for easier printing. It includes both a free-supported version and a 2-piece…

Pobrania
229
Polubienia
68
Ocena
0
P
PrintablesTechNerd
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
229
Polubienia
115
Ocena
5
P
PrintablesPrusa Guy

Wall hangers for paints and tools

Wall hangers for paints and tools

Pobrania
225
Polubienia
88
Ocena
0
P
PrintableszAbso

Power Rangers Time Force Chrono Sabers

Print Settings Swords Wall loops: 2 Layer Height: 0.2mm Infill: 3% Sparse infill pattern: Adaptive Cubic I only used this for the handle and blade pieces. The others were done in grid. Support: Tree Brim Type: Outer brim only Parts list…

Pobrania
220
Polubienia
35
Ocena
0
P
PrintablesRandyPulis

Lightspeed Zulu 2 Headset Controller Hangers

Single and dual mounts for Zulu Lightspeed controllers.

Pobrania
220
Polubienia
9
Ocena
5
P
PrintablesDucksauce

RC Airplane Hangers

hang your Rc airplane by the wing, just scale to the size you need

Pobrania
219
Polubienia
31
Ocena
5
P
PrintablesMylerMaker3D

Power Rangers S.P.D. Badge

Police badge featured in Sabans' Power Rangers S.P.D show.

Pobrania
218
Polubienia
39
Ocena
0
P
PrintablesAriel Warsh

New York Rangers Logo

Lets Go Rangers!

Pobrania
216
Polubienia
10
Ocena
0
P
PrintablesSimple3D

RAM Promaster Van Shelf Hangers

We love our Promaster Van, but we are always looking for more ways to hang things. I designed these coat hooks to attach to the shelf over the front seats Things I used: PETG filament ( https://amzn.to/3XTunen ) As an Amazon Associate I…

Pobrania
205
Polubienia
37
Ocena
5
P
PrintablesKurt Gluck

Modified Barbie Size Closet ( 1/6 scale )with Modern Doors including hangers I found

Remixed doors to have modern easy to grasp for granddaughter handles. I only include a single stl file, you just swap x axis in slicer. I include 3mf file, it has LEFT and RIGHT printed on door in different extruder. You change this to…

Pobrania
203
Polubienia
49
Ocena
0
P
Printablesunwohlpol

triple cube ear hangers

This is a great last minute gift! I hate christmas markets. And currently they are everywhere in the area I'm living in… and everybody except of me seems to love them and wants to meet at these overcrowded, overpriced rubbish-loaded…

Pobrania
202
Polubienia
59
Ocena
5
P
PrintablesMaruperi

Backpack hangers

Simple but useful models for hanging your backpacks wherever you want.

Pobrania
200
Polubienia
17
Ocena
4,75
P

Tiger Electronics LCD game (Power Rangers, Sonic) - Battery Cover

with the small details on this, might not be best suited for regular FDM printers, and is better for Resin. This is untested for now, but will updated once I have. Update 11/2/23: I found a minor discrepancy against the original version…

Pobrania
198
Polubienia
11
Ocena
0
P
PrintablesYuudai

Mighty Morphin Power Rangers Lightning Collection Command Center Version 1

These are several STL files to print your own command center for the Mighty Morphin Power Rangers Lightning Collection. You don't need every file for it. You can decide for yourself what parts you want. I will place the parts inside a…

Pobrania
195
Polubienia
27
Ocena
0
P
PrintablesGrayfaux

Hangers and Barricades Sci-Fi Terrain

Fortify your wargaming table with Hanger and Barricades. Enjoy!

Pobrania
190
Polubienia
51
Ocena
0
P
PrintablesJ Reed

Nerf Fortnite Sniper Rifle Wall Hangers

A set of wall hangers for the Nerf Fortnite Sniper Rifle. For use with 3M Command Strips I printed with standard PLA settings. Its recommended to print on its side with 3 or more walls and 15-20% infill.

Pobrania
178
Polubienia
16
Ocena
5
P
PrintablesIgnacio Vidal

Perchas eje Z - Hangers z axis Artillery Hornet

This is Remake of https://www.thingiverse.com/thing:4158561 (Thanks Cesar from Cotrol 3D). This are hangers to the bridge in Z, just put the hanges in the bridge and get with the one that has the hotend. when the axis in in the hanges…

Pobrania
177
Polubienia
15
Ocena
5
P
PrintableszAbso

Mighty Morphin Power Rangers Power Bow (Lightning Collection compatible)

Printer : Bambulab X1C Filament : Overture Pla General settings Wall loops: 2 Infill: 8% Sparse infile pattern: Gyroid (I just like gyroid infill) Support: Tree Normal supports should work as well. Make sure that no supports are generated…

Pobrania
175
Polubienia
29
Ocena
0
P
Printablesukwebb

Karcher WV2 Window Vac hangers

A simple hanger for the Karcher Window Vac Print Settings Printer: Wanhao i3 Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Generic PLA white Category: Household

Pobrania
174
Polubienia
18
Ocena
5
P
PrintablesGon Garcia

Nintendo Switch Dock Wall Mount with reinforced hangers

The original model made by Swesen is amazing. Since I wanted to put my little bag and a few items from the sides, I decided to reinforce a little bit the hooks to be on the safe side. Also decided to align the base and make it a little…

Pobrania
173
Polubienia
13
Ocena
4

Push-Pin Art Hangers

11 Slot sizes for each- .5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm. Slots have a 17mm gap from the wall. Designed to be simple and clean to hold art and drawings. No supports needed. Want to know more about the art in the…

Pobrania
172
Polubienia
109
Ocena
5

Mighty Morphin Dummy Rangers - Blue

I’ve created a remix of the Dummy 13, transforming it into a Mighty Morphin Power Ranger! The model is organized with pieces separated into folders by color for easier printing. It includes both a free-supported version and a 2-piece…

Pobrania
171
Polubienia
66
Ocena
0
P
PrintablesNico

Assorted IV Bag Hangers

I kept finding myself staring at the makeshift IV bag hook made from of a repurposed stylet, thinking I could do much better. During a slow shift, I sat down and threw together a quick replacement. While these are designed to fit a 32 mm…

Pobrania
171
Polubienia
42
Ocena
0
P
PrintablesTBD

Ryobi Powertool Hangers

Hey All, these are my Ryobi handheld tool hangers. There are 3 variants. A 25mm tall in both a short and long and an 86mm wide variant for the larger tools like the nail gun and hand planer. I have 2 drills, impact driver, multitool,…

Pobrania
169
Polubienia
25
Ocena
5
P
PrintablesBear Creek 3D

ClosetMaid Shelf Hangers

Needed a place to hang dog leashes, backpacks, laptop bags and the like. Zwoop's original design only fit on the front bar of my wire shelves so I decided a re-mix was in order. Will fit other brands of wire shelving, see notes below.…

Pobrania
168
Polubienia
48
Ocena
0
P
PrintablesAndrew Nelson

Handgun / Pistol Hangers

Handgun / Pistol Shelf Hangers Coming Soon, Hanger Bracket 20mm shelf thickness 150MM Depth (From Edge) Rod goes into the barrel 1x 70MM length (for compact) 1x 130MM length (for full size) Print with high infill, and strong material (to…

Pobrania
168
Polubienia
18
Ocena
0

Fly Bonnet hangers

Printed in Sunlu PLA+ at 50% infill

Pobrania
168
Polubienia
12
Ocena
0
P
PrintablesJared

T-Post Hangers

These T-post hangers were designed to hang steel 'gong' targets from, but they can be used to hang anything from a T-post (like potted plants, for instance). They should be printed for strength. I used 9999 perimeters, no top or bottom…

Pobrania
167
Polubienia
9
Ocena
0
P
Printablessledutah

Groove Life Belt Hangers w/6x2 magnets

I remixed NateG763's Groove Life Belt Hanger. I added 2 6x2 magnets to help hold the belt to the hanger. I added a drop of Superglue to the hole before inserting the magnet. Make sure you put the magnet in the hole in the correct…

Pobrania
167
Polubienia
26
Ocena
5
P
Printables3D Rejsen

9 Snowflake ornaments tree hangers

9 Snowflake ornaments tree hangers

Pobrania
164
Polubienia
48
Ocena
0

Fibonacci & Sierpinski Math Christmas Hangers

Printed 0.3 layer height 20% Infill No supports Tip: To hang, use two loops of string, connected to each other. This will stop the ornament from turning sideways.

Pobrania
162
Polubienia
41
Ocena
5
P
PrintableszAbso

Power Rangers Turbo Turbo Blade

Print Settings General Settings Infill: 3% Sparse infill pattern: Grid Wall loops: 2 Support: Tree Brim Type: Outer brim only Parts list Sword 1 5/16 threaded 36 inches long (914.4 mm) or wooden dowel Length of sword: ~39.5 inches (1003.3…

Pobrania
161
Polubienia
33
Ocena
0