Liczymy pasujące modele…
Garmin (FENIX) watch stand with charging option. All you have to do is print and clip the original cable. There is no need to purchase any additional charger
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fiz este desenho pois o suporte que tinha do meu garmin 800 não era compativel com o 1000 O que vinha o GPS ficava mais alto. Gosto de o ver em linha com o avanço Isto ainda não é a versão final English version (google translate) I made…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Hey! This is Garmin Vivoactive 3 Smartwatch / Sportwatch holder for your bike. It allows you to mount Smartwatch on the handlebars with aid of 2 zip-ties. Smartwatch is strapped on the holder the same way as it's on the hand. It provides…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
Double Universal Out-front Mount, for Garmin accessories. Use m3 screw/nut to close the fixation. V2 : rework fillet on fixation to the bike Printed in 0.2mm layer height, 20% filling with PLA+
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
The Garmin Vivoactive 4S smartwatch is smaller than version 4 and the original stand didn't fit my needs. Patrick was so kind to publish his original model as step file, so I was able to resize and redesign it a bit to fit 4S version. The…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
Balmbu Lab X1C: For best results models have to be scaled up by 10% so the border lines will be thick enough for printing with 0.4mm nozzle. or line width in print settings need to be changed down to 0.35mm. Embark on a delightful reading…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
A small and modern stand for the Garmin Venu 2 smartwatch. I have made the model Specifically for the 45mm version of the watch. At the bottom of the stand, the charging cable can be threaded in, and attached by the clip on the side. You…
Wydruk około 4,85 €–5,93 € nettoWstępna wycena jednego wariantu
You will have to add your own drainage if you want it. Makes a legit remote holder too. If you need a pot that drains find the original Charming Villa Planter with drainage.
Wydruk około 3,50 €–4,27 € nettoWstępna wycena jednego wariantu
Bosch Kiox 300 Halteradapter auf Garmin Edge u.a. Mit dem Adapter ist es möglich, sein Garmin Navi (z.B. Edge 830 u.v.a.) direkt anstelle des E-Bike DIsplays Kiox 300 von Bosch zu montieren. Das Garming Gerät rastet zwar nicht ein, klemmt…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The mout should work with all Garmin GPSMAP devices (tested with GPSMAP 65s). The mounting holes are spaced accordingly (31x41mm, ⌀ 5mm). The mount is very tight initially, but it gradually becomes a little looser and easier to put on.…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Slicing should result in double walls everywhere. If not, scale in XY. Printing in PETG results in some stringing, I hit it gently with a torch to get rid of those - use caution, lots of thin walls… PLA might work better for this one.
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Minimal clamp to mount a Garmin Varia (or compatible) on a 27.2mm seatpost. It's a very tight fit and a tiny M3 x 5mm screw is used additionally, but very gentle. I used PLA, 0.2mm structural and 3 perimeters. Organic support and 0%…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Bartmannkrug : Beard Man Mug Bartmann jugs were very popular, not only in Germany, but also abroad in the 16th and 17th centuries. They even reached the New World.
Wydruk około 17,76 €–21,70 € nettoWstępna wycena jednego wariantu
Starmie the spinner with stand. Using 608 ball bearing, if you dont have one try print 608D.STL Printer setup: Nozzle diameter 0,4 Layer height 0.20 10% infill No supports
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My saddle bag got in the way of a good place to mount my Garmin Varia RTL515 rear facing radar. This mount attaches to the seat mounts. My seat had 7mm bars and they were wide from edge to edge. This uses a single M4 nut and M4x20 bolt to…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Simple adaptor plate to use the rear of the BMW navigation cradle with the fitting bracket for a Garmin, TomTom or other standard four-screw mount
Wydruk około 1,38 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design is for the Garmin Venu 3S. The design is lightweight and easy to produce, making it an excellent DIY project for Garmin Venu 3S users. Parts Needed: Type C Charger Adapter for Garmin. ( Aliexpress ) 2x M3 x 10 screws. 2x M3…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Use case In combination with easy-to-get and nicely prices suction cups, this part replaces the Garmin suction cup holder for their navigation devices with 17.3mm ball joint. The original Garmin suction cup holder is not great and falls…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've coospo and noticed that fit with garmin model this remix contains modification of lock ring to hsw.
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
This charge stand for Garmin smartwatches reuses the original (mediocre) charging cable. It allows charging of the watch while being able to access the screen. The base has cutouts for up to 18 standard car wheel balancing weights for a…
Wydruk około 2,72 €–3,33 € nettoWstępna wycena jednego wariantu
This is a lightweight sun visor for a Garmin RV760 GPS. Printed on a Mini with 0.20 PETG. Supports used in the corners to keep the outside transitions clean. It works best by using a few small pieces of double sided foam tape on the edges…
Wydruk około 2,11 €–2,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for my Garmin Fenix 7X watches in silicone cover with velcro band. For when I need to charge it, but still want to see the display without the cable mess all around. I used a small L-shaped USB-C connector with a Garmin ending,…
Wydruk około 3,18 €–3,89 € nettoWstępna wycena jednego wariantu
The Garmin DriveSmart 86 has a 22mm ball joint instead of the other model's 17mm, so this converter lets the GPS be used with the standard mounting equipment. For printing, I used: 6 Perimeters 100% infill .20 layer height I have tested…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Miska na pokarm dla mrówek. Posiada uchwyt do wyciągania pęsetą.
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
The original Rose mount for the Backroad FF doesn’t seem to be very stable because of the hinge, which is why I wanted a 3D-printed mount. Another community-designed model for the Garmin Edge 850 broke twice while I was riding, which…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This setup is specifically designed for the Magicshine Allty 600 Front Light, although it may be compatible with other lights as well. You will also need: 2x 4mm bolts 2x 4mm nuts 2x Washers Filament used Prusament PETG Jet Black Print…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 29.05.2023 . I do not use this design anymore because I made a superior model shortly ago. I recommend not using this model any longer and suggest you use my best nozzle cam (and still the most affordable solution) . Problems with…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Garmin Varia mounting bracket for Kickbike disc brake scooter frames. This is a highly modified remix of Tim Angus' files for Garmin interface. Changed main interface body to adapt to Kickbike rear fork, modified inner tolerancies to snug…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
This model attaches to the standard Garmin bean bag mount. It is sized to accommodate the Apple MagSafe charger. This was printed with PETG with no supports are required for the build. The MagSafe charger his held in place with a friction…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model attaches to the standard Garmin bean bag mount. It is sized to accommodate the Apple MagSafe charger. This model has several parts (as shown in the exploded view/image) to accommodate how you would like to build this model. It…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter for Garmin nüvi2699LMT-D for cooling grill. This is an add-on for this Garmin mounting plate: https://www.printables.com/make/3403686 Hardware: M4x8mm Screw
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…
GARMIN compatible mount (both sides), can be used as a base for other designs. Step included. Category: Sport & Outdoors
There are loads of Garmin interfaces out there, but (in my opinion) they all fail for one of two reasons: the intended print orientation is horizontal, thus mandating support structures that are difficult to remove and leave residual…
Another Garmin bracket, this time with mountain bikes in mind. The clamp can be printed in place, with no supports necessary. The interface itself is in several parts, to improve durability and make it easier to print, again without…
A simple, modern-looking planter. I printed mine with a 0.4 mm layer height, resulting in single-wall edges. It was a little experiment that took about 3.5 hours to print. I’m sure modern printers can handle it much faster. Please note:…
Stuff you'll need: 1x Garmin insert (I took the one that came in the box, remove and keep the 2x M3 screws) 2x M4x8 SHCS such as these - https://boltdepot.com/Product-Details?product=6392 Start by screwing the printed model onto the…
Garmin Edge Mounts that goes under the stem cap. Normal version and a Giant OverDrive version. The mount geometry is partial remix from Eric van Helmond. Category: Sport & Outdoors
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Sell unique, stylish, and modern 3D models with a commercial license – no restrictions, full freedom! 💸 Why…
A small adapter plate to convert a quarter-turn mount to 2-pronged GoPro. There are plenty of models to convert to a 3-pronged GoPro mount, but I struggled to find one to go to the other side of the GoPro mount. Note that there are two…
If you have an integrated Garmin support and broke the plastic part, this one is for you ! WARNING : it's designed to work with the aluminum support, not alone (see photos) Print instructions Category: Sport & Outdoors Summary If you have…
Garmin Varia Radar - Bicycle Saddle Mount - also available for similar light versions The possibility of securing with zip ties - adapted for the original garmin holder Minimal supports Fast and easy print perfect snug fit Double…
A collection of Garmin ¼ turn to GoPro mounts, with variations of both male and female, 2 and 3 prong. All use an M5 bolt and nut. Available for sale on eBay: Male Garmin ¼ Turn Female Garmin ¼ Turn Printing Orientation: Male ¼ turn…
Garmin Edge computer compatible out-front handlebar mount for 34mm handlebars Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.16mm Infill: 30% Filament: Spectrum ASA275 black I have printed it…
v2: Top surface is flat now so it can be easier to print upside down sturdier constrcution through softer radii Original Garmin and Wahoo mounts can be used with screw holes, mounts will fit without protruding Update: Wahoo compatible…
A simple GoPro camera mount that can be attached to the bottom of Garmin Out-front bike mount securely using M3 screws. Another version which includes a vertical post mount (e.g. lights) can be found here . For more information on this…
Garmin fenix 5 watch charging stand
Update November 2024 NEW 10xx version: I added an elongated version of my GarYon v4 design to match larger bike computers. Durability experience: Until today I rode about 3500 km with the reinforced original design without any integrity…
Cover for Garmin LiveScope Plus LVS34 Transducer
This money bank is big enough to contain coins and bank notes when you are saving for rainy days. The Main Body is a single piece so a color change is needed if you want to have the base in a different color. The Top part screws onto the…
NOTE: This kit card was prototyped and designed for Bambu Lab printers using Bambu Studio. As such, I don't know how it'll print with other printers. My .3mfs can also be opened by OrcaSlicer and you'll find size variations in there.…
This is an adapter that allows you to mount the Garmin Varia radar to a Trek Blendr seat mount. This requires the blendr mount with a compatible saddle, as well as the insert from a Garmin Varia mount included with the Varia. The Garmin…
The only hardware you need to supply are two M3 inserts (I use ruthex) and two M3x6 (or 8mm) screws. I printed mine in PolyLite ABS, but PETG would probably be more than enough. I don't recommend PLA. Be sure to account for shrinkage if…
While you can insert coins through the letter slot, larger banknotes can easily pass through the top functional flip-down tray. The whole mailbox can be printed and put together within a weekend or less. Although this model necessitates…
My take on a sunshade for the Garmin Xero C1
Some notes: Can you please leave a comment with your watch model to confirm if the design fits, I would highly appreciate it! :) Also, if the model you are looking for is not listed, I can adjust the design to any model if you are able to…
This watch stand holds your watch, as well as your puck-style charger. There is also a version that will hold the stock charging cord instead of the puck-style charger in case you don't own one. I have designed these models with the fenix…
Starmie from Pokemon. Print two of the Bottom Star.stl
This adapter attaches to the underside of a Garmin Flush Out-Front Mount and allows the use of any accessory that has a 2 tab GoPro style connector. In order to attach this to your Garmin mount, you will need to replace the stock machine…
As said, two versions with and without Gopro mount. The uploaded STLs are designed for an inner spacing between the bars of 75mm and a bar diameter of 22,3mm but those parameters can be fitted to your needs in Fusion. parts for Gopro…
Simple adapter for a wahoo head unit to fit onto a garmin mount, the other designs here seemed to be unnecessarily thick.I printed it at 100% infill but you could probably get away with less, id recommend printing it on its side (with it…
A small adapter plate to convert a quarter-turn mount to 2-pronged GoPro. There are plenty of models to convert to a 3-pronged GoPro mount, but I struggled to find one to go to the other side of the GoPro mount. This is designed to accept…
I made this Armillary as a git for my Godson who is really into Astronomy (planets and stars and such things). There are several fine examples out there, just wanted to make my own. This Armillary includes Lunar Sol transits (purely…
This is a charging stand for the Garmin Vivoactive 4. Simply insert the original cable from the bottem and secure it in the slot. The part prints without supports. With the 0.3mm Draft profile on an MK3 it will take less than an hour.…
Part of my collection of keyboard switch fidget toys , Starmie edition! PARTS: You will need a keyboard switch in a cherry mx format or similar (I use Kailh navy box switches). There are 3 printed parts: the body (purple), the prong…
This is a new cable clip designed for the larger 35mm hose as used by some Festool and Starmix shop vac. It should also fit fpr other manufacturers using a 35mm hose. If you use the smaller 27mm hose look here:…
Learning F360 and made this stem mount for my garmin GPS. It's shown with a garmin insert, but if you search for “garmin k-edge” you can find a printable one. The screws just self tap into the mount, although you could use longer ones…
Soporte de Garmin para el manillar de canyon h31. El soporte original vale 30€, entonces pensé y si lo hago con la impresora. Después de muchos modelos y diseños diferentes he conseguido este, está en proceso y aceptó propuesta de mejora.…
Charming Bird Figurine – A Delightful 3D Print! Bring a touch of nature to your space with this beautifully detailed 3D-printed bird figurine! Designed with intricate feather patterns and a lifelike pose, this little bird makes for a…
Charging stand for Garmin watches. Print Profile: 0.2mm layer 3 walls 15% infill
The GEAR GROOVE Garmin Mounts are sold out on the website, so I added the lock made by @Trunda_1437739 to a GEAR GROOVE model. Included are 2 .3mf files; one in normal orientation with ironing on top level, but the upside down orientation…
I was struggling charging my watches and still be able to see / operate them. So I made this stand wich fits the original charging cable (slightly pressed in) - please check attached model dimensions to verify you have the same plug on…
Minimalistic and very light (~7.5g) Garmin Varia mount for 27.2mm round seatpost with 73.5 seat tube angle. Designed and printed as a single piece, mounted to the seatpost wiht the rubber band. Set support on build plate only and paint…
Minimalist Garmin Varia seat post mount for Canyon Ultimate (2024) D-shaped seatpost The seat post should be printed in ABS or another semi-flexible material Required hardware: 2x threaded heat set insert M3 x 5 x 4mm (Voron standard…
This is a mount for the Garmin Varia 715 light for mounting directly to the seatpost. Needs a separate insert from k-edge (K13-504 https://k-edge.com/shop/computer-mounts/garmin-mounts/replacement-garmin-insert-kit/), and a single M5x18mm…
I have added a sunshade to the design of Kytu. ( https://www.thingiverse.com/thing:4446393) Unfortunately, you have to print it with supports now. So a little bit of cleaning in the end is necessary. I printed it with 15% infill, 3…
Very simple print. Meant to be printed vertically. Mine is printed at 0.3 Layer Height in PLA. if you like this soap tray, click here or here to see other similar designs. And if you’d like to support my work, leaving a ♡ like ♥ or even…
This is a simple customization of HAMMER_T's Garmin Mounting Clip to mount my Garmin Etrex 30 on my Canyon mountain bike. I used a small piece of an old air chamber to make it grip on the bike. I printed it in ASA because it can happen…
Garmin Fenix 6 stand Easily printed without support + stp file available
Should fit Garmin striker 4 plus and cv plus. Attaches without adhesive and prints without support.
This is for your XT2. You can use it as a bumper or add the sun screen for extra utility. Print it black or crazy colors to customize your bike. If you print it please upload a picture and share your creation thanks! If you like this,…
This is a replacement cap for a super stroke grip for a golf putter. Also included is a version of the cap which can be printed in TPU and used with a Garmin CT10 club sensor. Normally this sensor simply screws into the end of the club…
Garmin mount suitable for smaller Garmin devices (Edge 840 or smaller) for the ROSE Backroad FF. Print it, add the Garmin or Wahoo mount insert from the mount that comes with the device and mount it with 2x M5 countersunk screws. The…
Stand for Garmin Epix -watch, you can attach Garmin charging cable to the stand. The hole for the cable is tight enough so it holds without glue or other adhesive. Must use support for printing, I used Tree support and it worked just…
Mounting rail/arm for the Garmin Xero C1 chronograph. Comes in three lengths (3", 4", 5") with either the 17S footprint (for use with Area419 ARCALOCK clamps ) or a generic footprint that should work with Amazon sourced clamps (eg.…
This is a replacement for my broken Garmin Fenix watch band strap loop. This link is to 3D View http://a360.co/2wgV0eJ Print instructions Category: Gadgets Print Settings Printer: Anet A8 Supports: Yes Resolution: .08 Infill: 100
Garmin Edge mount with more clearance than the original for chunky handlebars. This version has a chunk cut out under the mount for mountain bike bars. If you don't need the extra clearance, I'd recommend the original for better strength.…
Mini 3 clip coming soon! Light weight Garmin inReach mini clip, designed from the ground up, to be as light, yet sturdy as possible. Designed to be used with the lanyard attachment, and supplied hex screw. Confirmed that this also fits…
Sliding case for the Garmin Xero C1 Pro, tripod and cable. Magents used 5x5x2mm
Designed this pot because all the other vase-mode ones I printed kept breaking. It works particularly well with satin and shiny filaments and still prints reliably if you tweak the scale. If you’d like to support my work, leaving a ♡ like…
I've printed a few charging stands that hold the puck-style charger for a Garmin Fenix series watch. They've all been fine… but I decided to take a crack at modeling my own. It's a little more compact than the alternatives, and I tried to…
Description Garmin just released a new version of their popular Varia Radar system: the RCT715 . This product diverges from the rest of the Garmin line, in that it no longer has the quarter turn mount, and the existing mounts out there…
made this so I could mount my bike computer and light in a more compact package. My bike light had a GoPro mount but it wobbled too much and messed up the out front mount that came with my bike computer. I made this and printed a rough…
YTGRRL Summer Update!!! NEW BBD MAGNUM MODEL, now with EXTRA CLEARANCE for your baggage. By popular demand, the shaft is now LONG. This WILL lead to breakage, but I am here to please. Garmin quarter turn mount for Fizik saddles with an…
A stand for the Garmin R10 Approach, that will allow you to level it on the course, or at the driving range. The hole in the middle if designed for a 32x7 mm levelling bubble. Print at 0.10 layer height for best results.
Garmin Mount for the Canyon Aeroad (2023) Model. nedded Prints: 1x AeroadGarminMount 1x garmin-interface-spring 1x garmin-interface-lockring 1x assembly-tool (only for assembly) other needed Material: 2x M4x14 Screws (or similar length,…
better springing action, lighter tolerances , thicker on legs, + fillet
![Garmin Mount for Aerobars [parametric]](https://media.printables.com/media/prints/878658/images/6738792_8b57a8b9-5bd2-4d0c-9765-a5bec375e787_55f80f7d-9ae8-4304-b229-628c4828e804/20240513_114330.jpg)
