Liczymy pasujące modele…
While upgrading my 🥰 VORON to support a filament cutting toolhead, I was missing a depressor that matched what I wanted: Mounts on top of extrusion backers Provides a precisely fitted cutting position behind the print bed Keeps adjustment…
The official AD5x panel kit does not show to use any sort of washers for the screw heads that secure the hinges and door handles. I made these backers to spread the load of the screw securing the panels. This is especially important on…
This modular system allows you to display your games and media front facing with laser alignment along the Ikea 31" Billy Bookcase. The alignment edge is recessed approximately 10mm from the front edge of the bookcase, giving you that…
Holes are designed for screwing together with M4 bolts (threads not modelled, should adequately hold in the 3.5mm holes) or can just be glued together with CA glue. Cam lobe tires work great printed with TPU for friction, but a version…
This cover basically sits in place behind the screen to help keep the heat in the enclosure. I know for a fact that it fits the K1C (I printed it but was too lazy to take a picture of it for this) so you have my guarantee that it should…
The Multiboard Snap Backer Generator is a parametric OpenSCAD script that accepts length and width inputs to generate a surface with Multiboard snaps at the correct 25mm spacing (or other spacing specified by the user). This can make…
Check out my Amazon Page to see what kind of gear I use to make these models! Did you lose the truss rod cover for your Rickenbacker bass guitar? Print another one!
This is a treble pickup bezel to fit Rickenbacker 4003 basses. It may fit other models like the 4003S but I can’t physically try this to confirm. The Rickenbacker 4003 treble pickup cover may look cool and authentic, but it won’t be long…
Thumb rest for Rickenbacker 4003 (Recent models 2014-2017) that fits without the need for any modification to the bass. There is a standard version or a bevelled version. You can choose whichever you prefer. The bevelled version does give…
I really liked the original version, and attempted to print it with some success but getting it off the build plate and mounted on something else with the tiny separate pieces proved to be a challenge. I added a rectangle under the…
Backer/Spacer/Feet for IKEA Skadis Pegboard - M4 Screw
Print using the same material and settings as the default Voron parts. Uses the same screws. I included the .stp in case someone needs it changed.
Backer plate cutouts to use with front or rear XR footpads. These have either no inset or a 2mm inset from the footpad edge shape. Select/adjust this as you'd like. If you need to convert these to a DXF for machining, I've had good…
This is a remix of two models made by two different makers; combining what I feel are the best parts of both of their designs. If, because of under-extrusion, it is a little loose than desired, shim it, tape it, or add a bit of superglue…
This is a rail backer intended for use with an MGN12 rail, used with m3 nuts and cap screws to mount the rail
I created these backers as I had been damaging my kicker speakers about once per season and I have a theory that air pressures could've been adding to the cause of this and I also wanted a way to quickly change damaged speakers without…
.3mm thick, seems to work well without too much bulk, but YMMV
This is the MWO Linebacker, Loosely Based on mrhers' Linebacker model. This one has been gone over, arms replaced with better ones, and articulation points added on the feet. Additionally, the entire connection scheme has been re-done to…
I recently switched to the A4T tool head with AFC and had to remove my backers to install the cutting bar base. I immediately saw my bed mesh get worse, so I designed this to allow me to run both. I'm probably going to make another model…
Add some color and flair with a custom backing/surround accent plate for your stern pinball machine. I tested this with my Jurassic Park Premium machine. I assume it will fit most modern Stern machines. The ones you can buy are acrylic…
This version works great for balsa, cut foam and coroplast control surfaces. You can also use on foamboard, but I have a glue-on version that works great for foamboard. You can see it here:…
Update: I have added a version where the notch for the cable has it's opening against the printers frame instead of the enclosure top. This should prevent the cables from getting in the way of the enclosure top if you remove it for…
A remix of Julian Genton's Red Bull model. I added the blue & silver backer to it.
A Rush tribute coaster made from a Rickenbacker bass and Rush logo! Category: Art
Simple clip for multibacker Redmond RMB-M605
This is my current take on supporting the Railcore Y rail with a backer to reinforce the axis and reduce ghosting. Holes can and should be tapped for M3 hardware, simplifying installation and (theoretically) improving performance (a bit).…
Needed a quick and easy way to get a prop mounted with no good attachment points around. Created a base to attach to 2x4's and a small backer for the prop. Works with ½" EMT. ***Most likely won't work for halloween shows.
This model is a recreation of an aluminum RMP Backer from Greyman Tactical, it's used to mount attachments to their panel system. Pretty simple for PLA or PETG 100% fill. The 100% infill is essential because, when mounting items, you'll…
These are not compatible with the V0.2r1 skirts. Those models have been increase in height by 2mm to support taller Z motors. The step files are provided for further remixing. Along with 3MF files with both the main skirt and backer…
Plastic license plate backer for US-sized motorcycle plates. Print Settings: 6 walls, floors, and top layers 60% Gyroid Infill (for semi flexibility)
Elevate your Chinese replica Rickenbacker 4003 bass with a custom-designed bridge pickup ring. This pickup ring is tailored to fit the the Chinese replica 4003 model, offering a unique visual appeal. Features: - Tailored Fit: Designed to…
I wanted to add a cargo net to the Cargo Cover I installed in my 2023 Nissan Leaf. I have an aftermarket one, but it's the same kind of ‘thin fabric-covered cardboard-ish’ deal as the official one. The cargo net would be useful for…
Linebacker Prime for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
You will need 2x 40mm M3 socket head screws for sturdy mounting (button head might also work) A 20mm M3 socket head screw is also needed to mount the arm. The arm can be found here , the original design
WARNING: This ikea skadis round nut requires access to the back of the ikea skadis panel. The heat set insets are the M2 short inserts from CNC kitchen and can be found here:…
This cookbook holder is a two-piece design that is sized for medium size cookbooks, but can be scaled to fit large ones as well. Two-piece design will probably require two plates for most printers, but at least these piece can be printed…
Redid the top clamp parts (metric) so i can drive the screw using a socket wrench. See the BOM and instructions here: https://www.thingiverse.com/thing:6516352
This 3.625 inch OD element supports the filter along its whole perimeter. Must be printed using a food safe and high heat resistant filament (like ASA). To assure food safety a post-printing sealing treatment is recommended before use.
For more information, see original work on Thingiverse I have remodeled the mount to have it fit over thick titanium backers
This is a backer for the Ultimate Picture Frame (UPF) by Kat Creates. The UPF is a fantastic project that enables you to build picture frames of any size. Learn more here: https://katzcreates.com/ultimate-picture-frame-shop Faye offers…
Not much to describe, just a quick and easy backer for enamel and novelty pins. Other designs I found on Printables required TPU or left the pin post exposed. The fit on this model is intentionally snug to work with rigid filaments. If…
Wreath making is a great activity for family and friends alike. There are countless variations on the materials and colors, however, the shape has remained mostly unchanged. Whether it is made from cardboard, wire, foam or sticks, the…
When replacing the front wheel fender liner on my 2006 Toyota Corolla, I encountered that the front mud flap, which is attached to the linter by two M6 bolts, needs a backer plate on the inside of the liner. The original backer plate was…
My shower mixing valve was clamped to the shower liner using a plastic disc. During removal of a leaking mixing valve I found the plastic backer disc was stripped out and now needed to remove the disc, otherwise the valve was just…
Washer for backer boards, images shown tested on GoBoard. PETG, ASA or Nylon recommended. For maximum strength, print with 100% infill. I needed 24 washers for a project, but home improvement stores only sold them in massive boxes of 180…
For those attending the Open Hardware Sumit 2026 in Berlin , this plate to protects your shirt from the solder-y metal bits on the back of the SOA badge. Snap it over the back of your PCB so it doesn't scratch the wall, or pull your…
As I was rewiring my '73 ES I wanted a bit more room behind the fuse block to avoid shorts. This is the result. It will fit but you'll likely need longer screws to attach to body. Sits behind the fuse block.
Fixed OpenSCAD Multiboard backer generator bug. Resolved zero-height BOSL2 assertion error when offset is 0.
The flimsy particle board was popping out of the grooves of my kid's doll crib so I designed these to support it from downward pressure. Designed the screw holes for a 2mm screw and a 3mm head. Resize it as needed.
Wreath making is a great activity for family and friends alike. There are countless variations on the materials and colors, however, the shape has remained mostly unchanged. Whether it is made from cardboard, wire, foam or sticks, the…
My shower mixing valve was clamped to the shower liner using a plastic disc. During removal of a leaking mixing valve I found the plastic backer disc was stripped out and now needed to remove the disc, otherwise the valve was just…
Not much to describe, just a quick and easy backer for enamel and novelty pins. Other designs I found on Printables required TPU or left the pin post exposed. The fit on this model is intentionally snug to work with rigid filaments. If…
Plastic license plate backer for US-sized motorcycle plates. Print Settings: 6 walls, floors, and top layers 60% Gyroid Infill (for semi flexibility)
WARNING: This ikea skadis round nut requires access to the back of the ikea skadis panel. The heat set insets are the M2 short inserts from CNC kitchen and can be found here:…
A simple pin backer to make fridge magnet out of your pins. Included the fusion file. Simply adjust the dimensions to magnet size. Included 3mf is for 8mm x 2.5 mm magnets. PLA works but TPU is best
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Sheriff Backer badge. The supports required. Some parts need to be…
🚨 IMPORTANT NOTICE: We've reached our funding goal for V2 A free version of these files are available on our printables page. If you'd still like to support us by buying the backer pack please feel free to do so. 🛠 Introducing the Next…
Parts List: Decal: Amazon.com - Car Styling Decals Warning Do Not Touch Hands Window Phone DIY Sticker 150x68mm or any other 150x68mm sticker Magnets: TRYMAG Small 10x2mm 200Pcs Round Refrigerator Magnets, Tiny Rare Earth Mini Neodymium…
I disliked using nylock nuts and washers on parts, this uses the more standard heat-sert method to back the bolts.
Backer washer for RAM Diamond ball mount Adds style and functionality +20% infill
