Liczymy pasujące modele…
Update V1.01 : - Very tiny cosmetic adjustment, Removed the small rounded side edges on the front face as they didn't quite look right to me. It has not effect on the controler or puck fit and is purely to just make it look that tiny bit…
Stand for the 8Bitdo Ultimate C wireless controller. The base of the stand can be used to display the trinket keychain that comes with the controller, or the charging cable/USB dongle.
Inspired by the Xbox One S controller mounting clip, this clip is designed to snuggly snap around the 8BitDo Ultimate bluetooth controller. Based on a 3D scan of my controller, it fits best by hooking the clip to the top, and then…
EDIT: 1/12/2026 - After printing the original file from @JakJak I found the tolerances on the dongle slot version were way too tight for my dongle. Maybe my printer isn't tuned and maybe the 2C controller dongle is a different size.…
Stand supports both: 8Bitdo Ultimate 2C and XBOX Series Controller
If you want to support me or get commercial licenses , you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D A mini ratcheting screwdriver build around a standart (Bosch) Bit…
Inspired by the 8BitDo Ultimate controller mounting clip, this clip is designed to add clearance to the front buttons...
A quick remix to enlarge the hole in the top of the grip. This allows for the wired variant's USB cable to easily slip through without needing to file the edge down. Also compatible with standard generic USB SNES style controllers I…
8BitDo Pro 2 Controller Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. A huge thanks also to @lowsc0re for the creation of…
A lot of thought went into this redesign. Thank you akmiller01 for the original model. What's different? Out of the way: Narrower at the top so your trigger/bumper fingers have room to rest on the controller. Slim curve along the back so…
A simple but elegant stand for the 8BitDo Pro 2 controller. Likely also fits similarly shaped 8BitDo controllers. Due to feedback there is now two versions, depending on how well your printer can handle 45° overhangs. In general neither…
Purchase: Also available at kytor.com/store Recommended Materials: DURAMIC 3D PLA Plus Black or White PLA MAX Light Gray Variants: Rev 0 = Genesis Dongle Dock Rev 1 = Genesis and USB Dongle Docks Rev 2 = USB Dongle Dock Rev 3 = Double M30…
I am 95% sure it should fit with 8bitdo SN30 pro+ as well because they seem to have the same shape. If you have one, please print this and let me know if it works. For science! These are meant to be attached to a flat surface with…
My first completely original model! This is an Ikea Skadis mount for the Nintendo Switch Online Super Nintendo (SNES) or Super Famicom (SFC) bluetooth wireless controller. It will also work with the 8bitdo SN30 or SF30 bluetooth/2.4ghz…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
If you want to support me or get commercial licenses , you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D My second version of my mini ratcheting screwdriver build around a…
Feed the Goblin: https://buymeacoffee.com/goblygon 2 types of stands for the 8bitdo Ultimate C Contollers: Original: Same shape as the charger stands that come with the more expensive models Large Base: Flatter at the front bottom. I made…
It's the controller stand by Goblygon with added slot for the USB dongle. Designed for the Ultimate C but fits the Ultimate 2C as well. This is done by taking the stand as-is, and subtracting a model of the USB dongle. Plus subtracting a…
Print with the top of the lid face down, and the bottom of the base face down. This is the first draft and just happened to work with my settings (.16mm, PLA, Build plate supports only) so if you have issues and know a better way to…
The model is made up of two peices. You will need to put the original 8bitdo cable in to the “Back”-part and obtionally, you can slide in two AA-batteries to add weight to the dock. Afterwards, you can slide on the “Front”-part to…
A display stand for the 8BitDo SN30 or Nintendo Switch Online SNES controller. Includes dongle slots for SNES and USB. Also compatible with original SNES wired controllers. Purchase: Also available at kytor.com/store Recommended…
A 3D print friendly sticklock / Protector compatible with the 8BitDo Ultimate controller. This may be compatible with other controllers; the inner diameter of the sticklock is 9,7mm. Make sure to print this with at least 2…
This remix from pixelauthor's SN30Pro+ Trigger plate. pixelauthor's version has a profile that allows the same trigger plate to be instaled on both left and right R2 button. However the one downside is the trigger plate profile does not…
Display stand for the 8bitdo Arcade Stick.
Remix of BedroomCow's excellent grip for the 8Bitdo Lite. The Lite 2 has the exact same dimensions, but the L2/R2 triggers extend at the back of the controller, which doesn't fit in the original model. I simply added two cavities for them…
I wanted a stand for my Gamecube controllers which matched some of the ones I'd printed / designed for 8BitDo controllers, so designed this. I took inspiration from the remixes and attempted to use some of the sizings, but after many…
Remix of the 8BitDo Ultimate IKEA Skadis Holder (DraftB) by JackSoldano on Thingiverse, https://www.thingiverse.com/thing:5926164, to fit the 8BitDo Ultimate 2C wireless controller. v2 now includes a cut out for the charging port and a…
A wall mount holder for Ultimate 2C No supports needed!
Compatible with 8bitdo SN30pro and Pro2. Possibly compatible with other 8bitdo controllers
Print at 90degrees with supports. The USB hole must face upwards
The grip clips on to the SN30 pro. The clips and the grip part are printed separately and have to be glued together
If you have used the original Snes controllers you immediately notice that the 8bitdo dpad is much looser, which at first seems to be nice but it might not perform as well as the original. This is not a big issue in all games but for…
A very quick and dirty but functional vertical stand for the 8BitDo Arcade Stick. I needed somewhere to put the fight stick when I'm not using it and I wanted it to take up as little space as it could and thus I needed a stand. This is a…
Proudly display your 8Bitdo PCE 2.4G Wireless Gamepad for PC Engine Mini, PC Engine CoreGrafx Mini, TurboGrafx-16 Mini & Nintendo Switch controller with this display stand. A single and double display are both available. Purchase: Also…
Dos versiones de soporte para el Skadis de IKEA del mando 8BitDo Ultimate 2C. Two mount versions for the IKEA Skadis.
original model https://www.thingiverse.com/thing:3402989
Wall holder for the 8Bitdo SF30 Pro controller. If other 8Bitdo pads fit please let me know as i only own the SF30. If you need one of my things printed or you want to suggest a modification on a part please drop me a message! If you…
I wanted to mount my 8BitDo Ultimate base on my PC case. So I removed screw holes from original design. Also removed unnecessary (for me) wire hole and increased LED window width.
I carry this controller around with me and I kept on inadvertently turning it on if I had it in my pocket. I needed to cover the lower center 8bitdo button that is the power button. I wanted to keep the case as minimal as possible for…
I wanted a cover for my 8BitDo Keyboard to keep out the dust and never ending cat hair. It is designed to be printed in two pieces. I added 1.2mm holes at the edges to allow the two pieces to be connected together using .041" stainless…
It's a slightly rounder version of DusBus's controller stand. I also added a slightly raised area to the base so it kind of appears to be floating on the table. Prints really easily, no need for supports. I printed mine with 100% infill…
Uses two pegs from @KimJanosch https://www.printables.com/model/635620-skadis-skadis-universal-peg/files Print on its side to get the best strength. 0.2 layers in PLA or PETG and 4 perimeters. Automatic paint support and a wide brim. I…
This is the next iteration of my attempt to make the best universal phone holder for controllers. Inspired by newer Hall-effect controllers like the 8BitDo Ultimate 2, I wanted to make a design to fit that, and ensure that it is easier to…
Remixed original model to be a skadis mount for the ikea pegboard system. Single part print, supports required. Basic 15% infill, standard supports works fine. Nothing fancy needed, supports pop off easily. Printed in PLA but whatever…
Its a recreation of the 8bitdo micro controller, incase you need to make a model and you cant be bothered to measure your own controller. Category: Video Games
I made this cover to protect the analog sticks on the SN30Pro 'cause I bring it with me everywhere in my bag and when I put something in I'm afraid of breaking them. The cover clips to the little holes in the controller for the original…
I wanted an M30 stand to match the awesome 8bitdo SF30 stand here ( https://www.thingiverse.com/thing:2777612 ). That doesnt allow remixes so can't list as inspiration but used all the ones listed as either source material (for the…
I remixed "8Bitdo SF30 (SN30) Pro Grip 2.0 by DavidSL448" to be able to print it without supports (except for the "arc") Also the rear "arc" can be printed sideways and thus much stronger. You'll need to glue the 4 parts, I used gel super…
Minimal and nearly invisible controller stand adapted for the 8BitDo Ultimate C2. Remix of the Xbox invisible stand by Lucas Romero .
To protect the awesome hall-effect joysticks on the 8BitDo Ultimate Bluetooth controller, I designed this little thing. For it to work, it has to be printed with flexible filament . I used a TPU A95 and the included gcode is for this…
You can mount the Nintendo Switch on your 8Bitdo Controller. You need the lower Part of the 8bitdo Xtander.
Lots of people have been saying this controller is almost perfect but has too much slop…so I decided to do something about it. ____________________________________________________________________________________________ I have 2 parts…
Reccomend printing with organic supports at 0.2 layer height with 0.4 nozzle. If you want the same fuzzy skin texture for the grip and the logo on the back like in the picture then try using the .3mf file below, though bare in mind this…
My first own 3D Model and Project. For my Car I needed a Snug Fit Controller Holder. Print Settings Printer Brand: XYZprinting Printer: da Vinci 1.0 Pro 3in1 Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 15% Filament: No…
Needed a way to play PSP and DS games on a plane, so I made one. Printing Details: The uploaded files are in the correct orientation. Add supports as you see fit I am testing with 100% infill PLA, will update this rec if I have issues…
Hold my controller 🎮
This remix adds a place to store a 2.4GHz dongle together with the controller. Insert the dongle into the hole behind the controller. Supports needed only for Skadis mounting part, the hole can be printed as bridge.
I recently bought another one of these controllers since the hall effect stick update and am obsessed with the SNES controller form factor. I even swapped in the purple buttons for extra nostalgia. To protect it during travel/in a bag, I…
Print without supports, maybe with a brim or mouse ears.
This case will protect the 8BitDo Lite 2 controller buttons and joysticks from being messed up when stashed in a bag. The lids are joined together by 6 pieces of magnets. I attached them to the case using epoxy glue, but other adhesives…
This is a remix of the regular wall mount with a place to store the usb dongle
Attaches to joysticks to store the dongle when you travel with the controller. Provides some level of protection for the joysticks as a bonus. Yes the stand has a slot for the dongle, but are you really using it? Updates 2025-11-30 made…
This is a replacement handle for the 8BitDo Arcade Stick. I do not like the ball-handle, so i designed this one to more match my arcade machine. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: Yes…
This is a remix of Kytor's SNES controller stand. I wanted a version that didn't have the dongle slots at the back, so made it myself. Other than the removal of the dongle slots, some material has been added at the back of the stand for…
Remix - Printed on Bambu Lab A1, 0.6 nozzle with minimal infill with PLA. I wanted the top part to have a textured look, so I printed upside down on a textured plate with support. If printed normally, no support will be needed.
Thumbstick Replacement for 8Bitdo Gamepads Tested with SN30PRO, SF30PRO, and SN30PRO+. Features: Hat Options: Available in 4 shapes and 3 sizes. The short hat closely matches the original thumbstick length. All hat lengths can fit the…
This is a case I made for the 8Bitdo Zero controller by 8Bitdo. This is a small controller, so I want to carry it with me everywhere I go to play some games on my smartphone, but I don't trust myself to carry it in my bag with nothing to…
Print supports for the Skadis feet. For multicolor printers, I suggest you use another color for the logo to stand out more.
A wall-mounted holder for the 8BitDo Pro 2 Controller, Pro+ and SF30 Pro. Attach with 2 sided tape
Stand for the LATEST SN30 pro (2020version) with the thumbsticks. MMU version Print instructions Load all files into prusa slicer, pick your extruders and you're good to go! As per usual, F360 and STEP files included for remixing.
Used negative cylinders to make cutouts for screws. You can adjust the size to your liking. I used M4 screws, the hole should be big enough for the screws to sit flush. Additionally I used 2 90 degree brackets to support it even more.…
I printed in PLA with ‘gyroid’ infill at 15% which is definitely strong enough for my use - though ‘grid’ or similar would probably be a better choice considering the direction it's likely to have pressure. A also added 100% modifiers at…
Hey! I wanted a minimal and "invisible" stand to showcase my 8BitDo controller. So, I designed these little things. They're small but surprisingly stable. It fits into the screw holes on the bottom of the controller. Hope you enjoy it! Max
This is an object to represent, in the physical world, a game abstraction know as “clocks”. Basically round counters with 4,6,8,10 or 12 segments that you usually fill in on paper. I like having props in my games, and having gadgets so I…
Nozzle 0.2mm Layer Height 1.2mm
This is a remix of the 8BitDo 64 Controller Stand by @nomenclate_250085 . I have integrated three different logo options into the front face of the original design to match various retro and modern gaming setups. Why this remix? The…
A simple stand for 8BitDo / SNES Mini controllers
Update/Warning: Do not print in PLA, print in PETG or ABS/ASA. PLA creeps over time and the mount will eventually fail to hold on to the controller. I originally printed mine in PLA and they worked fine for about 1 year before the…
Hang your 8BitDo Ultimate 2C controller by its joysticks under your desk with either screws or double sided tape.
Better grip for your thumb
This is a simple attachment for the 8BitDo Mobile Gaming Clip . It replaces the clam that holds onto your phone with a Magsafe magnet, which allows you to use the phone vertically (which is great for DS emulation) and horizontally, and is…
8BitDo M30 Gamepad controller for use with Sega Genesis / Mega Drive or Analogue SG.
Purchased SN30 Pro for travel and liked sternendrache2 's thoughtful approach for a light weight grip. I wasn't sure why glue would need to be involved so I tried putting the parts together and printing and it worked out well. I did print…
Includes alternate with Analogue logo Originally remixed when source file was Public Domain
Prevent damage on your controller's joysticks with these Caps. Compatible with 8bitdo & Xbox controllers. (I don't have a PS controller so I don't know if either of the sizes fit those controllers, comment below if you try them out to see…
This model is not a direct remix. It was designed from the ground up, but it was inspired by the general idea and form of the following model: https://www.printables.com/model/1334284-8bitdo-ultimate-2c-controller-stand-with-usb-and-c I…
Simple to print - you'll need to set the bottom flat on the bed but prints really easy once you do.
I found the stock volume knob on the 8BitDo Retro Keyboard to be too fiddly to turn easily and quickly, especially with one finger. I don't want to have to grasp the knob with two fingers and turn my whole wrist just to change the volume.…
Purchase: Also available at kytor.com/store Recommended Materials: DURAMIC 3D PLA Plus Gray or Black Printing: 0.4mm nozzle, 0.2mm height, 15%+ infill, 2+ walls No brim or supports necessary Variants: -00 Single Controller Stand Revision…
Can be printed on the side or upright. Supports required for the hooks.
Printed on Ender 3V2 using PLA Plus Rotated on the side and Supports used
Replacement buttons for the 8BitDo SN30 Pro controller. These buttons have a more pronounced fillet to allow for easy sliding from button to button.
Remix of Jbot's 8bitdo Ultimate wall mount. Just added Skadis mounts.
This is a series of parts I designed for my 8bitdo arcade stick to use standard keyboard switches in place of the arcade stick. The "plate" screws into the holes from the original joystick. The "plate" interfaces with the "inner" part at…
8BitDo SN30pro+ Wall mount
Mount your Amazon Fire HD 8 (10th gen) tablet to your 8BitDo Pro+ controller with GoPro styles connections. The tablet fits snug. Needs 2 M5 screws to connect the parts, which allow you to change the angle of each connection
Do you have Honeycomb Wall Storage by your gaming consoles and want to have your controllers on it? This will help. I printed on its back with the insert at the lowest part. Used tree supports but Normals would also work.
Simply print two using standard settings and clip into place on the back of the keyboard.
Everything is the same from the original post: https://www.printables.com/model/489583-8bitdo-lite-2-magnetized-case-and-wall-mount This version only changes the magnet slots to use 6mm x 3mm magnets like these from amazon
Just changed wall anchor to fit hexagon wall
