Liczymy pasujące modele…
🇬🇧 Description This model has been designed to allow the use of the CANVAS system on the Centauri Carbon 1 , while keeping the printer fully enclosed using the original top glass. The riser lifts the lid to provide clearance for the PTFE…
Printed with a Bambu P1S in PETG without any supports.
================================================== ELEGOO CENTAURI CARBON - TOP PLATE RISER & CANVAS DOCK SYSTEM ================================================== 📝 Overview & Core Details Description: A custom riser that lowers the…
EDIT - UPDATE 15 August 2026 Based on some feedback, I've replaced the 3MF file with one that contains better plate labels and support blockers / enforcers. The original 3MF file has been removed to avoid confusion. There is a solid…
Canvas bypass for TPU & Spool Holder - Elegoo Centauri Carbon 2 (CC2) This is our "Made in Cave" solution for printing flexible filaments on the Elegoo Centauri Carbon 2. Description While the CC2 is a beast, printing TPU requires…
I decided to design my own printable top-hat for the CC1 with Canvas to enable me to use the original glass top. I have left spaces in the front, rear, and left sides for 2mm acrylic sheet pieces I found on Amazon (150x200mm). I used 10mm…
@PrintedRawDs_4927914 Centauri Carbon 1 and 2 lowered top cover/riser remix. I like his design since it lowers the canvas to make the height of the top hat/cover/riser much lower. Also the acrylic is very affordable and easy to get. Total…
Designed to hold a framed 3D Painted canvas. Due to its fine tolerance, best to print at 0.1 mm detail setting. You can find the Frames here: https://www.printables.com/model/543221-frame-your-filament-paint The Filament Paint “Starry…
Adding a quick description for now. Elegoo published an adapter to allow for use of flexible filament with their CANVAS system for the Centauri Carbon 1 (and also CC2). However, it has a main problem: it does not work with the fittings…
The IKEA RIBBA frames included wall mounting hardware is about 1 inch deep set into the back of the frame, making traditional hanging with a screw difficult. To make it easier to mount IKEA RIBBA frames, and by extension, canvas prints, I…
Stretcher bars for embroidery/needlepoint canvas. Use tacks to pin the canvas around the frame like you would with wooden stretcher bars. Use four bars to make a complete frame. Features Stretcher bars from 4" to 10" (in 1" increments)…
This upwards facing picture hook is made for canvas printed posters on wooden frames. They have a closed wooden frame all around and getting them on the wall with a zero gap is difficult with normal picture hooks. That is why I designed…
Lowers canvas and routes with a side bracket. The core hat is broken into 4 pieces with puzzle joiners. For my installation, I glued all pieces together and glued panels in place. Panel sizes are 6"x13" x <3mm. Much more quiet :) Edit…
This is completely redesigned toolhead cover for the Centauri Carbon series that improves on print quality, durability and noise. Now also supports CC1 Canvas and CC2 ! Key improvements Lightest toolhead cover available with good center…
Hi Designer here: Sorry for the AI blurb below, i struggle with the words so i had some help May the 4th be with you :) ⚠ STATUS: WORK IN PROGRESS / UNTESTED I am very new to Fusion 360 and CAD. This model is currently untested and will…
This may or may not fix your issue... but it fixed mine! Adding the Canvas system to your Centuri Carbon 1 adds extra drag to the filament lines, which can cause under-extrusion, loading failures, clogs, war, failed prints, and male…
Updated 16-05-2026 with a CANVAS friendly version
The Centauri Carbon Canvas Compact (CCCC) is by far THE MOST COMPACT SOLUTION FOR CANVAS . It has a number of key features: Adds only 7 cm / 3 inches in height Includes lighting Replicates the CC top surface, allowing other items (e.g.…
BONUS MOD FOR THE TINKERERS: I have added a bigger compression ring for the Tangle Detection. The bigger ring increases tension required for the Tangle Detection to trip in return allowing more friction to be permitted through the system.…
Godzilla doesn't care about your holiday! Remixed this excellent coaster design into a Chroma Canvas image using black, bronze, tan, and white filament in a 150mm x 150mm square, which should leave plenty of frames to choose from. :) If…
Simple and effective insert for Canvas board game. Board Game Geek Kickstarter Print instructions Print the insert twice and the box 6 times (for ribbons). Colors are up to you - I like to make the box color match the color of ribbons (as…
The PTFE tubes coming out of the Elegoo CANVAS are short and unsupported. When you push a PTFE coupler onto them to extend the line out to a filament dryer, the tubes bend under the side load of the coupler and the extension hose. I…
Command hook Canvas Hanger
prints flat and, easily assembled and creates a minature artist's easel. Designed to hold a iPhone in landscape or portrait modes. progression design from my contest model…
UPDATE! It seems due to an oversight in the design the glass lid is slightly too big. There are remixes of this model available that fixes this issue. Please use those, instead of this original to save yourself the time and filament. This…
Heyho :) Here is part 2/3 of my DIY projector screen project. A practical fastener for the screen (or other thinner objects). It works quite simply and reliably (already tested for a few months on high tension). Part 3/3 of my project is…
I lowered the canvas and created a riser that puts the height around 670mm including handle similarly to the CC2 Emoji. The top spool brackets are lowered and the rear bracket has a shield to protect the canvas cable when swapping spools.…
Decora tu pared al estilo Hawkins con este cuadro en relieve inspirado en Stranger Things. 🚲🌲 El diseño a dos colores combina el logo clásico con las siluetas en bici y las raíces del Upside Down, logrando una pieza súper llamativa para…
Summary These printable filament swatches work as both physical color and material samples and smart RFID tags and are designed to make filament management faster and more automated. You can quickly compare colors for new designs, and…
I needed a sturdy stand to hold my wife's hobby artwork, as it kept falling from the shelf. This stand gets the job done, as long as your photo or art can maintain its shape and this will hold it place securely.
Brought this model over from makerworld and made it fit with canvas see link below. THIS IS NOT MY DESIGN. Printables didn't have it so I'm brining it over and making it more clear what fits what. PRINT 1 Bracket & 1 Bin If you have the…
I made this to help with filament feeding at the 4 in 1 after I upgradded my Centauri Carbon 1 with Canvas.
Mirror of the Opencentauri CC1+CANVAS CAD model available on the OC CAD github for greater visibility. Printables rewards from downloads are donated to OC project crew. A live viewer available on the OC Docs website The base CC1 model is…
This is a 200mm tall version of MU74NT's original design. I cut the ptfe tubes back 70mm and still had issues with the lines trying to push the glass off the top of the original riser. Figured while I was at it, I may as well update this…
The main wall plate is a copy from Thingiverse thing:4628899 from Barelyanything. While this wall mount is IMMENSELY helpful, it's even more helpful to have some way to align the mounts when hanging on the wall. I designed these aligners…
These are brackets to lower the spool holders on the stock Centauri Carbon 2 to the same level as the Emoji edition. This allows for mods that mount the Canvas system lower, such as the design by Printed Raw Designs. I tried just dropping…
Heyho :) Here is part 3/3 of my DIY projector screen project. A practical fastener for the screen (or other thinner objects). It works quite simply and is very strong. Function Installation: Simply place the two parts under and over the…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
After getting my Canvas upgrade, I could no longer use the original slide because spool 3 blocks the end of the slide. This new slide mounts with the screw under the purge chute and goes to the left away from the spools and uses one of…
I’ve designed a spool holder drybox for the Elegoo Centauri Carbon 2, currently in its alpha stage. This is an ongoing project, and I’ll be continuing to refine and improve it over time. I’m releasing the Fusion files for anyone who wants…
Elegoo CC1 with CANVAS top hood Assembled with M3 screws, heat inserts and glue. Adjustable vented top Need 12 M3x4 or M3x6 heat inserts, 12 M3x8 screws Need 2x 168x168 plexiglas for the windows or print 2x the plexi_window part using…
This is a raw canvas hanger that can be easily attached to the canvas frame with a staple gun. Use ½" or longer staples for a solid connection. It has a hole for centering the hanger on the canvas and two hanger options. With these, I was…
I previously had this poop chute on my Elegoo Centauri Carbon (ECC1) So, when I added the Canvas multi-color system the old chute interferred with the cable. I was inspired to redesign a bigger, better, model with a similar look but…
2 remixes of the center piece of the Canvas hanger by GarryGB: Nr. 1: for a nail but at only 30° instead of 45° and with a flat survace so you can hit the nail untill it is fully in. Nr.2: for a Screw at 90° 1 remix of Frame_Top with a…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
print every file once. Find the longer side of the corner. Take one of the long sides, and attach to the longer part of the corner. Repeat the steps. take the short side to attach the rest. I have updated this model, to make it easier for…
A sign that reads NO SOLICITING NO CANVASSING NO RELIGIOUS GROUPS NO FLYERS OR JUNK MAIL Printed with the default 0.2mm quality settings in Prusaslicer.
The side of a tent was getting pinched in a door. This pins the fabric/canvas in an adjustable fashion.
Like the title says, a Mega Poop Bin for the Centauri Carbon. The dimensions are 209 x 130 x 231mm so it fits between the Canvas-port and Power Plug. Internal dimensions are 205 x 126 x 229mm which makes it about 5,94 liters, but as the…
This remix of Jo Larsen's riser makes changes to improve strength and compatibility, and to provide additional options for panels. The panels are split into two pieces per side - they can be joined with a length of filament, inserted with…
Consider this a version 0.1? Print two art card sleeves and one token tray. DISCLAIMER: I can't guarantee it will fit since it just barely fits in my box and the measurements were based on my box's dimensions and they can vary by up to…
Minecraft yarn block With this you will be able to make minecraft blocks with yarn, just remember to not use thin yarn, or your creation might suffer the same fate as the chest. Guide for creating the blocks
Printed in draft, this is scaled smaller than the original and has a hole for a nail. You can use any material you feel works best for your requirement, PLA works great.
A hook for canvas with a slot in the center of the frame Ein Haken für Leinwände mit einem Schlitz mittig im Rahmen. Print Settings Printer Brand: Anycubic Printer: i3 Mega **Rafts:** No Supports: No **Resolution:** 0,2 Infill: 15%…
Two STL files for printing: one for cards or thin canvas stock, another for broader canvas frames. Remixed from Easel Canvas Stand by TallGuy_67 How I Designed This Slight Modifications in Blender Modified Easel Canvas Stand by TallGuy_67…
8" x 10" canvas stand. Could probably be scaled up for larger canvases. Slot is about 11/16" wide (16.8 mm) and 1" deep at most. This will lean the displayed canvas back 5 degrees. Printed this in PLA with 10% infill, 0.2 layer height, no…
Ok soo i just want to leave it really clear here, this is my first ever fully original design mechanism for 3D printers, even tho some trial and error (and fixing) was made (the first image shows a earlier design that didnt hold the…
The canvas mount uses the original screws and mounts to CC1. Glue the “Canvas hood” to the rest of the Top Cover in position while placed on top of the CC1 and canvas. This allows easy removal of the top cover when needed without…
Scratching your head on how to hang a framed canvas? This super simple print is your saving grace.
Elegoo CC1 poops chute and basket for CANVAS users Access from the left of the printer, big poops basket for multicolor printing Need to replace the original screws by 3 M3x8. The problems seen on pictures are allready addressed on the…
This is a CANVAS cable guide for EugeneLaw's excellent CANVAS cap, or others that lower the CANVAS. Secures the cable to provide clearance above spool #4. The cable slot should be tight enough to hold the cable, but a slot has been…
For those of us who already have the CC Vented Riser... I've modded the new CANVAS Topper to fit onto the top of the riser...It fits snug and will not vibrate loose...no need to reprint the adjustable vents as the new CANVAS topper is the…
The quick push connectors for the PTFE tubes on the on the elegoo centauri carbon canvas are slightly recessed which makes them impossible to push with the finger when you want to release the tubes, this tool solves that issue. This 3MF…
A compact, L-shaped sawtooth wall mount designed specifically for picture canvases. This version features a built-in side stop to prevent over-sliding the canvas left or right — ideal for consistent wall alignment. It's screw-mounted from…
These models were made using a technique shared in my instructable: https://www.instructables.com/Designing-3D-Printed-Cross-Stitch-Canvases/ The prints I generated are for stitching the stardew valley chicken, sakura, heart, and pokeball…
Waste Bin and Drawer for Printers with the Canvas multi-color kit.
a simple standard size stretcher key for canvas Printed on anycubic kobra plus 0.6 mm nozle 0.5 mm layer height 80mm/sec wood PLA at 195 degrees
Started with the best Centauri Carbon 1 Canvas low profile mount from @ALExtremeErr_2722476 Many thanks to the original creator for such a great design that met my needs. The modifications I made were mostly to meet my specific LED strips…
I did not create the original. I don't know who did. all I did was remix it to print without support. Print out of anything you want but remember that UV and Temp resistance for its use case would be important. Printed out of ASA. If you…
Identical model of the CC1 Canvas/new CC2 spool holder mount, obtained from Elegoo.
Mirror of the Opencentauri CANVAS CAD model available on the OC CAD github for greater visibility. Printables rewards from downloads are donated to OC project crew. A live viewer available on the OC Docs website The base CC1 model is also…
Prints without supports. I ordered the following acrylic panels for mine, the model can accept up to 4mm deep panels, but I went with 3mm as it was more readily available: Dark tinted 3mm panels from cutmy.co.uk for approx £25 delivered -…
I wanted a toolhead cover that gave me access to the extruder and would hopefully stop the rattling of the fanshroud. But nothing was compatible with the Canvas unit yet. So , I made some changes to this cover so it fits the new Canvas…
🔧 Rear Ramp + Magnetic Purge Bin for the Elegoo Centauri Carbon 1 equipped with CANVAS 🔧 After installing the CANVAS on my Centauri Carbon 1, the spool positioned at the lower rear of the machine ended up blocking the use of my previous…
One piece canvas. Black and white color required. Excellent gift for One Piece lovers.
Made a remix to make the shroud from @SpamNRice_3402200 compatible with the canvas mount from @EugeneLaw_1166687 so the canvas unit can sit high enough to clear the canvas cable as well as low enough to not have too much interference…
These are feed designed to hold a canvas on a wooden frame (18" x 14" x 18mm). These feet slip onto the frame and balance the canvas in landscape and horizontal orientations 10 degrees from vertical. Printed with top and bottom skin…
a simple design that makes the life of a freelancer much easier, this design is a regular chair used for small canvas, but instead, I write my every day to do list on a small paper and now it's in front of me all day. I included two…
This Canvas Spacer is great for making sure your canvas paintings wont touch each other while stacked! This can be used for flat storage, shipping in boxes as well as drying your canvases stacked. This spacer also includes 6mm holes on…
Stands to screw to a canvas for acrylic paint pouring, so the paint doesn't pool at the edge of the canvas. You need to print 4 of these, one for every corner. Use regular countersunk wood screws but check their length so you don't screw…
Custom hook for command strips, great for placing standard, Michaels canvas onto the wall without damaging the painting or the wall also, great for wire, hangings, scarves and other accessories
I have constructed a simple canvas holder. The three holes on the back allow you to mount the bracket on the back of a screen. The many half-holes on the lower side allow you to align the screen perfectly straight using a nail/screw…
square shape for holding canvas paintings without poking them. basic canvas painting hook for gridwall
Update 09/24/2026 : I added 5 x extended shelf variant files, that have the PTFE tubes shelf portion of this current "Rear right corner w/ added inner PTFE tubes shelf" remix model extended out at 5 x more depths, as compared to the 42 mm…
This is a small spacer designed for the Elegoo Centauri Carbon 1 equipped with CANVAS . It installs underneath the metal catch/bracket on the hotend/nozzle wiper assembly , slightly changing the position/height of the factory metal catch.…
It is little fun for back of your canvas frame, so you can put it on the wall without too much boredom. Even hanging of your pictures can be fun.
Generates any size of canvas you need! Has customizeable: - Brim - Hole amount - Hole Diameter - Count/Inch - Thickness! Make sure you got good Bed adhesion for this/Use a raft! (Please ignore the atrocious print quality in the pictures,…
This is a remodeled mix of the below 2 files: Thank you Jesusfreak and JKulien Mairy... I also modded the top rear risers to allow the original glass top to slide out, allowing for more ventilation if required...Use felt strips to make…
This is a canvas holder miniature. Just a little way to make ambients more cozy and display photographs, notes, and other forms of decoration. If you want something bigger and more robust to display a actual miniature canvas, let me know!…
You can spend more money on specialized tools to stretch canvas onto a frame, or you can re-purpose readily available (and locking, which is better) sheet metal pliers. The issue with sheet metal pliers is they can have sharp edges, a…
This is a simple hood upgrade for the Elegoo Centauri Carbon with the Canvas upgrade installed. It’s a border (frame) that rests on top of the printer, and an IKEA SAMLA 12 gallon box then sits on top of that border. The model is sliced…
For three A4 sheets of plexiglass without cuts (original dimensions 210 x 297 mm) The parts from the original model are used for the right side of this project The mounts for the plexiglass sheets have a thickness of 3 mm, since the…
modéle modifier désoler, je ne retrouve pas le lien original du proprietaire modele légerement agrandi le couvercle en platique 39 x 37 x 27
Canvas Link. Black and white color required. Excellent gift for Zelda lovers. Instructions: We start with white up to 1.1 mm and at that point we change color to black until the end.
Maleficent canvas. Black and white color required. Excellent gift for Maleficent lovers. Instructions: We start with white up to 1.1 mm and at that point we change color to black until the end.
I noticed an interference issue with the Canvas cable and spool 4 with the original bracket. So I altered the bracket to move the Canvas unit up about an inch (25mm). This will alleviate the fitment issue, and make loading and unloading…
Printed perfect with: No Supports PETG or similar Shout out to Slava for the original design!
Present your creations in Canvas boardgame with this 3d frame made to the size of the game cards. We love to present our creations in this wonderful game and I decided to make a frame to replace the classic easel on which we explain to…
Canvas mounting system, the ridges bite into the wooden frame and help the canvas stay flat on the wall, whilst being mounted solidly. Printed in PLA Print with support on bed. Prints quickly. Works amazingly.
