Liczymy pasujące modele…
A set of cavity dowel for repairing broken threads, threaded inserts or anchoring in cavities without access to the nut. The set contains dowels with which you can anchor into a wall with a thickness of 2-14 millimeters. Designed for M5,…
After duplicating the Milwaukee Packout Low-Profile Organizer bins , and creating dividers and a modified low-profile square bin that can go where the low-profile rectangular bin normally sat, I decided I might as well duplicate the deep…
Since I made the rectangular divided bin that has 4 cavities that fits the Milwaukee Packout Organizer, I was asked to make a rectangular bin that has only three cavities. Here it is. If you like these models, check out some of my other…
Meet the angriest molar in town! With clenched fists, a furious frown, and even a cavity battle scar, this tough little tooth is ready to fight plaque and cavities. Perfect as a funny desk buddy, dentist’s office decoration, or just a…
My Spirit XS shaft outboard works great but sometime sucks in air from the surface leading to ventilation/cavitation and power loss, especially in reverse. This plate fixes that. Should fit both the Spirit 1.0 and 1.0 plus as they have…
Wer kennt es nicht, da wird ein Loch mit einer Lochsäge vorbereitet und die Hohlwanddose hält, weil das Loch etwas größer ist. Dafür gibt es Ausgleichsringe wie diesen. Einfach darüber stülpen und schon wäre ein Problem gelöst.…
Custom Guitar Pickup Router Template. Smaller than normal measuring about 3" x 6.5" Scalable in slicer of course. Cavity Control Plate template is included. 2 printable control plates are included. with recessed screw holes (Watch those…
2020 T-Slot Twist In Cable Clamp 10x20mm for Aluminium Profile - Guida Cavi con aggancio rapido per profilo alluminio 2020 Suitable for: Other sizes: Resize to adjust dimensions All our designs are free to download and use—because sharing…
2020 Twist In Cable Clamp Two Sizes for T-Slot Aluminium Profile - Guida Cavi con aggancio rapido per profilo alluminio 2020 Two Sizes - Due Misure: 14.5x20mm 20x20mm Suitable for: Other size: Resize to adjust dimension All our designs…
ING - Printed using PETG - Layer height 0.2 - Nozzle 0.4 - Use support - Number of perimeters 4 ITA - Stampato con PETG - Altezza strato 0,2 - Ugello 0,4 - Utilizza supporto - Numero perimetri 4
2020 HEX T-slot twist-in Cable Manager - Guida Cavi con aggancio rapido Suitable for: https://www.printables.com/it/model/767250-profile-2020-alu-4-sides-open-adjust-the-z-scale-t…
This model is compatible with the lego system.
Sistema per installazione della catena portacavi per Flying Bear Ghost 5. L'intero progetto si può installare sulla stampante 3D sia con configurazione Bowden originale, che con modifica direct drive Orbiter o direct drive Sherpa mini.…
Removable Lid means you can fill it with weed... or whatever.
Was dismayed that nobody ever made a little “caviar” / fish eggs model that I could possible use for Finspan… at least for free. So decided to make my own just by using a bunch of spheres stacked on top of each other. Also wasn't such a…
Parts are not automatically aligned for printing, and aren't sized properly (sorry). Just make sure you resize everything to a constant scale while slicing. Also, make sure you separate the bristles from each other. Some parts need…
I needed to install the battery pack attachment for the Fishman Fluence pickups. Instead of opening a hole to the original plate, I instead designed this one. You have 3 options: Original Cover Plate without any extra openings Cover Plate…
Custom lithophane stand included. Software used: Photoshop, Luban, Meshmixer and S3D. Dimensions: 160mm x 142mm x 6mm. Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is a large and detailed stl…
While assembling Carbon 13 Type-F, i noticed that the hip covers were not fitting in properly. Upon checking Type-M files, i noticed Type-M having a cavity inside hip covers for ball joint to fit in, but Type-F did not had that. This…
This extension (WHW socket) is for cavity sockets to obtain more space for the electrical installation. The adapter is screwed onto the cavity socket and can then be installed in the wall. This is useful for integrating smart home…
This model is compatible with the lego system.
If you loose the nozzle from cavity wax spray gun, you can now print one. Front hole is small, adjust size by drilling it to size you like.. You can test it in plastic bottle to see the spraying pattern. I think I used 1.5mm hole in the…
3D Printable Interdigital Cavity Filter Description This is an interdigital cavity filter designed specifically for the default LongFast channel for Meshtastic (906.875MHz). It is designed with a ~5MHz bandwidth. It is made using…
I used supports, and the hole is designed for a 6mm x 3mm magnets, as that is what I had on hand.
perfect ornamentic for a cool CNC milling wood router prints without support in 0,2 both direction Have Fun
We live in a brick house with double walls filled with isolation. There are holes in the wall to make sure moisture can get out. The disadvantage is that insects can come in and make hives. I have problems with wasps. You can buy these…
A custom neck humbucker ring, designed to fit over a P90 cavity. Screw sizes are standard.
Purpose: This is a case I designed to hold extra 21700 cells for my flashlight (TS21) while not in use. I needed some way to safely carry them around without losing them. This case will electrically and thermally insulate the cells to…
R7 Gyro Egg Fidget | Layered Shell Fidget Toy with Hidden Cavity | R7Makers Some fidgets spin. Some click. This one opens . 🥚 The R7 Gyro Egg is a palm-sized layered shell fidget with 4 independent gyro rings that open and close with a…
Simple protection for FPV drone motor wires, full video here: https://youtu.be/wzCz4pSUgaQ
Use case If you would like to add a software controlled 30mm fan to your RaspberryPi 2B or 3B, this design is for you. It builds on top of the excellent design from Malolo. Printing Both parts can be printed easily in the uploaded…
A couple designs for a Floyd Rose back cavity cover. This fits my Schecter SLS Elite's equipped with a Floyd Rose 1000 and 1500 but should fit many guitars. Make sure to check the measurements (other sizes available in my models). I use…
I had mine made by PCBWay out of aluminum with the decal done in a white silkscreen, but you could easily 3D print it, or even just paint the aluminum yourself and ad a vinyl decal. Designed for a Schecter Sun Valley, but should replace…
This model is used to position and route the control cavity when mounting a standard Telecaster-style control plate on a guitar body. The holes near the corners reduce pulling tension during the print. This minimizes warping after the…
Semplice appendi cavi da fissare a parete o a lato scrivania. Si possono appendere cavi di vari diametri, ha 4 alloggiamenti larghi 6 mm e 4 larghi 8 mm. Stampato in PLA con layer da 0.2 ed infill al 30%, ma sicuramente va benissimo anche…
What I changed This remix uses SamK3D’s G19 magazine model as the base. I added two internal cavities sized for small inert weights (I used U.S. pennies) so the printed piece better approximates the empty-magazine weight and balance when…
UPDATE: Mar 19, 2023 Added Batman Faceplate Bracket to mount two Zebra lights to a helmet. Four optional cover plates with logos printable in multiple colors: basic solid, “bat sticker”, crawling caver, and cave conservation logo. Base…
This set of cavity covers was modelled after the factory-fitted tremolo & control cavity covers on a PRS SE Custom 24-08. The blank cover model can be printed with the outer surface lying on the print bed, so that it picks up the texture…
Vánoční ozdoba ve tvaru zvonku
This model is taken from a CT scan of a middle aged male, and includes a brain cavity. Category: Biology
This is a remix of the Caliper Radius Gauge by DrAl. I liked DrAl remix, however my caliper blade did not quite fit. I specifically had an issue with the cavity that is supposed to support the very end of the blade was not large enough…
Here is a Nintendo Game cube base for Nintendo switch. This dock have a cavity where you could fit your Nintendo Gamecube controller adapter. You only need to insert the adapter by the frontal side and then simply fit the frontal panel.…
Added numbers to ease the identification of individual samples in the holder designed by Klein. Readability of the numbers can be improved by a color change. The lid by Klein remains unchanged.
Sistema Modulare Tubo Passacavo – 8.3 mm Un semplice sistema modulare per l’instradamento dei cavi, progettato per mantenere piccoli fili ordinati e protetti. Il sistema è composto da tubi lineari con connessione maschio/femmina , che…
Made a mould cavity of a generic speed feed for my rotor. A silicone mix is poured into the cavity, creating a cast of the speed feed. Find a silicone mix with a shore hardness of 40 which is as strong as a pencil eraser. Solidworks 2012…
These are a series of mounts for nullrouten's baymesh cavity filters and various meshcore / meshtastic nodes for clean, simple mounting options. Each mount is designed to use low-loss patch cables and keep them as short as possible.…
I love my pop socket. I use my phone to record reels. I wanted to create a way to use my pop socket on a small tripod.
Description A modern and functional Instagram logo keychain featuring an internal cavity for an NFC tag. This design all
This is a modified version of small 3x3 and medium 6x6 bases by @crazy_format. It gives more room for wiring and also adds a cavity at the bottom to put your ESP2866/ESP32 module into. The wireless module cavity should fit any reasonably…
Three piece set of electric guitar control cavity routing templates. Inner route (do this one first), the outer route (done second, resulting in the 'shelf' your control plate sits on), and finally the actual cover plate. The control…
A couple designs for a Floyd Rose cover. This fits my Charvel equipped with a Floyd Rose 1000, but should fit many guitars. I printed mine on THIS textured bed. Make sure your original one is around 85x139mm. I have included the Fusion…
No supports reqd, Printed at 0.2mm layer height with 2 walls and 10% infill.
Cavion Go City - Powiększenie baterii hulajnogi z 7s2p na 7s3p. Wszystkie pliki dostępne do pobrania łącznie z szablonami, ze względu na ciasne pasowanie dwie wersje zatyczek końcowych wewnętrzne lub zewnętrzne zależy od średnicy rury :)…
LEGO DUPLO-compatible Cavity Brick 1x2x2 Designed to go with LEGO DUPLO Door 6x7 Printing information The STL file is correctly aligned. Layer height: 0.2 mm Perimeter: 2 Infill: 100 % Support: no I am looking forward to your Makes! :-)…
Busta Supermana v podání Henryho Cavilla. Děkuji za stažení a přeji příjemný tisk Do komentáře napište jaká další postava by Vás zajímala
Ferma-cavi per Logitech G923 Post-Printing Utilizzo una piccola prolunga per connettere la pedaliera, lo spinotto è più ingombrante dell'originale e impedisce l'avvolgimento dei cavi. Ho così creato una nuova staffetta con fori…
The Box is cavity inside and have two parts.
The 915MHz cavity filters from ACASOM are a bit spikey because of the exposed screwheads poking out the top. I wanted to use one with a FemtoFox but was worried about the exposed bits damaging something else in the enclosure and made…
Motorola TPG2200 Tetra Pager Battery Cover with Clip and RFID Chip cavity for identification or lock systems. For removing the cover you need to use a small screwdriver or similar und pry the cover down from the pagers body carefully. The…
R7 Gyro Egg | Ultimate Prize Egg | Large Shell Fidget with Hidden Cavity | R7Makers Some eggs you decorate. This one you crack open. 🥚 The R7 Ultimate Prize Egg is the big brother of the Gyro Egg family — scaled up to nearly baseball…
I created and made these different spits and cones chargers for use in caving. I made them in polyethilene for the body part, and in polycarbonate for the window part. but you can easily make them with a 3D printer. Choose an anti-shock…
Contenitore Tester cavi rj45 a nido d'ape
JChannel, passacavi. Credo sia molto utile per il cable management nelle postazioni simracing
Drill holder with magnet cavity Neodymium magnet cylinder 6x2 mm - 12ks
I really like frankyf71 L-Bracket to keep the cabling to the heated bed out of snagging distance of the Y-motor, which I saw quite often with my ender 3 pro. The bracket works on pretty much everything which uses a 2020/4040 or similar…
I wanted to be able to carry a sharp scribing tool with no lid in my pocket and ended up making this for my working set of implements. Keep a kneadable eraser in the lidded cavity on the side - the lid stays in place by gravity if there…
Watering hole stuffing for Savic Rody Cavia cage (70 x 45 x 31 cm), it is originally for guinea pigs, but also can be commonly used for hamsters. We have faced the problem with biting the plastic around the watering holes so I designed…
I wanted some resonate cavities for my tuning forks, so I designed this OpenSCAD script to make them. It prints the frequency (rounded) on the top of the cavity. The models included are ones I made for my tuning forks, but I am including…
Printed with PLA please scale, model is quite big Be carful, some edges might be sharp!
laccio ferma cavi flessibile da stampare in tpu con percentuale tra il 20% e il 30% di infill, senza supporti.
You will need an M6 screw, 20 mm and 30 mm in length, approximately. Two nuts and four washers. It’s good if they’re made of stainless steel. There is also a hole for a pin with a diameter of 4.5 mm to provide rigidity to the connection…
I remixed the Thin layers scraper (tiny+ergonomic) from SH to add a cavity for a magnet. No glue required. The design has a cavity 5mm deep with a diameter of 12mm. Pause the print before the lid is printed, and drop in your magnet. I…
This is a perfect "last meter" print: it only uses about 3 g - roughly 1 meter - of filament! Turn your fridge into a candy store with this gummy rat magnet. Print the rat in transparent, colorful filament for a convincing candy-like…
Ho voluto creare una clips dedicata per questa struttura in alluminio con sede 8mm e misura 45mm x 45mm Pla Prusament galaxy silver Supporti solo dal piano di stampa
I recently got a Quantel Brilliant rainbow laser system. The cavity gasket was missing so I printed one. There is a “positive” for direct print and a negative for casting a gasket from silicone. The mold already has the right conical…
This model is a mock-up of the water dispenser cavity of some GE Fridge models (GNE27JYMFS and GNE25JSKCFSS) to test fitment with custom water dispenser faceplates.
Cavity to add magnets mid print.
Thumb turn / door snib for cavity slider - suits Lane branded cavity door privacy set. Got tired of using a screwdriver or bottle opener to latch the garage door from the inside - Press fit with alignment notch to prevent slipping.…
Responding to https://github.com/prusa3d/PrusaSlicer/issues/12481 This model takes the repeating elements of a rectangular grid and introduces small gaps to shepherd the slicer into following a single contour overall. This is a common…
Motivation For the proper installation of the Paulmann LED Set 3x3W (Mirco Line) I needed a housing for the assembly into a hollow wall. I also wanted to place a Shelly switch into the housing, so some additional space was added for…
Introducing a smart solution for your shower space: a custom-designed 3D object to perfectly fit your shower cavity. This ingenious creation features a specialized slot perfectly designed to safely accommodate your soap bottle. The slim…
This part is a mold of the inner cavity for a dishwasher's tower protector. https://www.appliancepartspros.com/whirlpool-protector-tower-wp8268825-ap6012262.html You can use this design to make your own piece from or simply as a way to…
portacavi da muro a 3 misure con foro di fissaggio e fessura per fascetta lasciate un like e aggiungete il mio contatto grazie per la comprensione
si posiziona all'uscita dei cavi creando abbastanza spazio per fissarli tramite fascette crendo un poco di ordine
Pratico supporto per sistemare i cavi dietro al televisore: Materiale :PETG, PLA Riempimento: 20% layer: 0.2 mm perimetri 2-3
Semplice supporto per il cavo estrusore con aggiunta supporto per il cavo MMU quest'ultimo ci avevo pensato in un secondo momento quindi l'ho dovuto incollare ma ovviamente è possibile stamparlo come un modello unico. Si fissa con vite al…
Pac-Man Cavity Mold – Fun, Easy & Efficient This 3D-printable mold design lets you create a silicone mold that makes 10 mini Pac-Man pieces with ease! Designed for smooth casting, easy unmolding, and efficient material use. 📏 Mold &…
Screw Broomstick Solided Remix
Cartello Avviso di Pericolo Cavi Elettrici in Tensione con 4 Fori per il Fissaggio. Dimensione 200x100mm.
Print with infill 0 and no top surface. You may want to adjust extrusion width - on 0.4mm nozzle I set 0.8mm width and 2 perimeters. Holes for water drain are to be drilled after print to your taste. Cavities on the bottom are for…
DEUTSCH: Abdeckung für ein Ikea Billy-Regal, die seitlich eingebaute, flache Hohlraumdosen (für Lichtschalter oder Steckdosen) abdeckt. Der obere Lochkreis wird auf 102,5 cm, von unten aus gemessen, gesetzt, sodass der obere Teil der nur…
Friend of mine asked for a template to rout the control cavity on his Jazzmaster. Template is 12mm tall and attaches to the guitar body on the existing holes using #4 x 1/2 in screws. I believe you can use the same screws from the control…
A cute "Mushroom Storage Box"! Featuring a 10x15cm large inner cavity, it is perfect for organizing pens, scissors, and other large desktop items. The model is optimized: all parts are split for multi-color printing, and only the cap's…
Epiphone Les Paul Special II - Active Pickup Battery Expansion & Cavity Cover (V2 Improved) If you've tried to install EMG or Fishman Fluence pickups into a Special II, you’ve faced the hard truth: the control cavity has absolutely zero…
Passa cavi magnetico con magneti interni (nascosti) Dimensioni: 20x20x10mm Pausa: impostare una pausa al layer 28 se stampate ad 0.16mm Riempimento: 50% Materiale: PLA Magneti utilizzati 5x2 e 2x1mm allego foto dei magneti utilizzati
I wanted a way to add weight to the model, so I created a version that enables adding weight to the shifter. I used 40% infill and did supports from the plate, but YMMV, I'm new at this. :)
Cassetto porta cavi e utensili
This is an egg which is made up of 2 parts with a small cavity in the middle if you want to store something inside. This is an original design made within Autodesk fusion. Reference image used:
