175 modeli
Turn your everyday payments into magic ✨ This 3D-printable star wand is designed to securely hold a standard contactless credit/debit card , allowing you to tap-to-pay without removing the card. Just insert your card into the wand, and…
Minecraft Creeper's head as keychain, correctly textured by using the original textures as height map. Multple versions available: -flatback keychain: easiest to print, model rotated face up and backside made flat to be placed on the…
I have designed a simple tube to use with Festool CTL MIDI shop vac bags. Just take your single-use dust bag cut at the end to open up a bag, empty all dust if any and use a printed tube clip you can use a separate part triangle strip to…
I have designed this box for condoms, tampons and stuff which is almost perfect: https://www.printables.com/cs/model/371842-smooth-pocket-case-for-condoms-durex-tampons-etc The only downside is that you have to trim the corners of condom…
Full Base / Riser with Drawers. Print in PLA or PETG 0,2 - 0,24 Layer Hight - 0,4 nozzle Min. 20% Gyroid Infill for Strenght i build with 35% infill. Part 7 only needed if u dont want drawers, then just print that. Fits the AD5X Like a…
On the original Prusacaster, the hardware is placed 1.4mm too far to the left, but two more options exist for the Harley Benton hardware. mrstolarsky made a great new core with the screw holes for the alternative hardware, plus the…
The Prusa MK4's extruder filament inlet has a threaded M5 hole for which Prusa provides a Festo QSM-M5 fitting to use with MMU3. This model replaces the QSM-M5 in a reverse bowden system for the MK4. The adapter is designed to take a…
simply adding ready to print stls instead of obj that had issues with orca
After using a few sub-$100 usb c docks with my MacBook Pro (M1), I could not for the life of me get them to work correctly. I always had to plug / unplug multiple times, etc to get my external monitor to display anything. I don't wanna…
UK: Belt tension gauge so you are sure you have tensioned the belt perfectly... DK: Bælte Spændingsmåler så er man sikker på man har spændt Bæltet Perfekt op… Printer settings: Filament: PETG Layer: 0,15 Nozel: 0,40 Infill: 0,20 Support:…
Full Base / Riser with Drawers. Print in PLA or PETG 0,2 - 0,24 Layer Hight - 0,4 nozzle Min. 20% Gyroid Infill for Strenght i build with 35% infill. Part 7 only needed if u dont want drawers, then just print that. Fits the AD5M Like a…
Avengers Ulton Mask! I can't recal where I found it, but all credit goes to the creator for which I don't have that information at hand. Found it in my downloads after a night of surfing for content with the meaning of praising the…
Designed this cable / hose clip to be more robust around the cable section. Made primarily for the CTL SYS which seems to have a smaller OD that the newer CTL Midi dust extractor. Printed in PLA - seems to have enough flex to fit round…
Look at https://dl2man.de/linked-dipole/ for detailed instructions and look at the Video for seeing me setting it up, doing all the measurements and some QSOs. All files Printed from PETG in 0,15mm Layer hight, no supports needed. Make a…
100% as in the series, unlike the others. Print settings: The model is designed for printing with the parameters. All layers 0.1 mm Nozzle 0.4 Filling 100%. To glue evenly, insert a piece of filament 4-6 mm. Print 5 (stones) 1 square, 2…
This is for the card game Dominion, by Rio Grande Games. It's a large (~60cm in diameter) tray designed to be place on a "lazy susan" base so all players can spin the tray and reach all the cards easily. It can hold both sleeved and…
Update: Uploaded a new model of the 2.25 sander as well as new 1.125 sander. New models facilitate easier printing. A sanding block that perfectly fits a 1/8 sheet of 9x11in sand paper. Tear the sand paper sheet in half the short ways.…
Summary This is a rack-mount cage system for the Protectli FW4B mini-PC (a popular OPNsense / pfSense router for home-labbers). It is designed to fit either a standard 19-inch server rack or 10-inch mini-rack and take up 1U of rack-space.…
I used OnShape to create this model. For each face, the diameter of the pips are adjusted to ratio 1/(n^(⅓)) so that the volume lost for the pips is the same across all faces. You can find the model on OnShape and copy/modify it if you…
As Eric said: This is a simple cover for behind the xLCD screen of your MK4 printer. However, the main model has one major flaw, which is the off-center alignment as the xLCD is not mounted symmetrically. With this remix I adjusted the…
I decided to make this genius model for free. I noticed with my Elegoo Centauri Carbon 2 that the GEEETECH spools don't really fit on the filament holder due to their large inner diameter, or rather, the retraction function of the holders…
Now, this is just silly: this is a remix of a remix of a remix of the original design by Mikolas . Click the links to learn about who added what. — There are three known versions of the Harley Benton Thomann hardware: 5-screw hardware…
Now, this is more than just silly: this is a remix of a remix of a remix of a remix of the original design by Mikolas . Click the links to learn about who added what. This remix includes 4x4.0mm holes for M3 threaded inserts for the side…
This project is a scaled-up credit card replica designed to hold a real card and enable contactless payments in a fun and unconventional way . Just insert your card into the slot, and you can use it normally with payment…
This is an adaptor that allows connecting the hose of a Festool CTL Mini shopvac (and probably many other shopvacs) to the suction pipe and floor nozzle of a Bosch Solitaire Sphera vacuum cleaner. The problem is that the Festool shopvacs…
I designed this for my Air65 but it should work with other brands. I have weighed the frame at 2.6g which is the same as the oem air65 frame. I recommend printing slowly in PLA with default 0.2mm layer height profile and Arachne wall…
"Perfection is the enemy of perfectly adequate." - Saul Goodman If you're like me and enjoy the occasional game of Time Crisis, but can't be compelled to spend $250 - $450 dollars for a refurbished original pedal or Sinden replica, and if…
Threaded FOXBAT Muzzle System SCAR, MEGA, MEGA XL muzzles or cosmetic muzzles just for the looks (screw barrel attachments directly onto the blaster) The Silly SCAR also fits and works with it if you use a 10" or 25,4cm aluminium barrel…
Mechanical keyboards and key switches can be expensive and what happens when just one breaks? You have to throw out the whole keyboard! What if you could print your own key switches instead for like $0.04 each? When one wears out (after a…
Could not find the model while trying to design a holder. I took the measurements myself with calipers. Please find the cad model here…
This model is based on the Bambu Lab Reusable Spool - Minimal Version, but with the center hole adjusted to fit the axle of the Winder Spool Holder of the Bambu Lab Filament Spool Switcher. It uses the same 0.2mm solid infill as the…
DF54 exactly indicator that uses the original screw. PETG printed with MMU3, but single exdruder also be fine :)
The challenge was to design a directly printable chain using simple geometries and without the need for any support
I wanted to relocate the stock fan to have better access for maintenance. I tried many mods and designed new ones. Including TPU ducts, because every available duct deformed on the first layer of a big PETG print. Also any restriction or…
I needed a holder for my tablet when I'm not using it, so here it is. This is basically my first model in fusion so it's pretty simplistic. The .3 inch models are for a Wacom CTL-472. The pen holder version obviously holds a 472 pen but I…
Knurled grip for the Wacom CTL-471 pen.
This is a simple holder to dock your contactless card reader from square into! It allows a place for the sticker to be displayed along with the reader to be plugged in and connected without leaving the holder!
The Lego Duplo train is great, but to build bridges, you need a ton of bricks for supports. This brick solves this issue, print it and have self-supporting connections between the tracks. Just support it with a toy and you're good to go.…
yet another Wacom One (ctl-471) stand Category: Accessories
Perfectly adjust the dividers inside of the base part as well as the side drawers! Using this configuration, you can adapt the cutlery organizer to your drawer within a large range of sizes! I've also included all dividers ranging from…
3D model of contactless payment logo
This thing enables you to use shorter belts in a printer with the traverse bar mounted on the lower side. This is a remix of https://www.thingiverse.com/thing:2782170 which is a remix of https://www.thingiverse.com/thing:2347849 Update…
WHAT IS IT? I don't know what to call it, that's why it's called “The Screen Thing!” It's a little bracket that holds your DM screen at a perfect angle so it can't flop around. Print enough of these to fit all the bends in your DM screen,…
I use these parts for hose management between my Festool CTM Midi cleaner and MPCNC Primo. Parts are simple but works really well. The edges are rounded to prevent any damages. Fits Festool D27/32x3,5m-AS/CTR vaccum Hose WITH attached…
A small nozzle for the Festool dust extractor Kleine Staubsaugerdüse für das Festool Absaugemobil
USB Cap of the perfect size to fit (almost) any USB plug
OnShape: https://cad.onshape.com/documents/73164e87a7dd98ca5aa5c7dc/ Can be used by: https://www.printables.com/model/1004861-dragon-burner-eva-3
Holder for Bosch vacuum wand on Festool CTL SYS vacuum. The holder tightly fits in the ~1.5mm gap between top and bottom halves. Onshape document link:…
Needed an adapter for my Festool CLEANTEC CTL SYS to fit an Bosch PBS 75 belt sander. The vacuum hose inlet of the PBS 75 has an outer diameter of 30mm. The fit is snug but since I recommend printing with about 80% infil one can sand the…
"Perfection is the enemy of perfectly adequate." - Saul Goodman If you're like me and enjoy the occasional game of Time Crisis, but can't be compelled to spend $250 - $450 dollars for a refurbished original pedal or Sinden replica, and if…
I want my Voron AWD to be quiet so with it slowed down to 250 mm/sec, accel turned down to 8000, 15% gyroid infill using a 0.4mm nozzle and 0.3mm layer height, the print took just under 3 hours. The planetary operates smoothly right off…
I tried to combine the fixes introduced in prusacaster-correctly-placed-hardware (@trudslev) with the Minicaster core-bridge model from minicaster-prusacaster-for-prusa-mini (@Tomek) . Made for the 5-screw hardware used in the original…
What The Protectli FW6 is a passively cooled server, but I wanted to add a 120mm fan to control temperatures since I have it installed in my AV/server closet and when everything is turned on the ambient temperature can get well over 80F.…
Better fit - Fit Perfectly
I decided to make this genius model for free. I discovered that PRUSAMENT spools don't fit on the filament holder of my Elegoo Centauri Carbon 2. Therefore, I designed an adapter that can be printed in vase mode. The design is optimized…
Note: photo shows an earlier version of this print without the numbers. The model includes them for convenience, though. This is a simple, lightweight print with 8 pins ranging from 7.85mm in diameter to 8.2mm in diameter, spaced far…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
Replacement drawer for standard Duplo cabinet. Recreates design 4891 . Should fit printable box by @__sh as well. Also includes similar drawer fitting into Strictly Briks Big Briks 2x2x4 with one open side. (Apparantly not available…
This 3D-printable star wand is designed to securely hold a standard contactless credit/debit card , allowing you to tap-to-pay without removing the card. Just insert your card into the wand, and you’re ready to cast your next “payment…
Takes Metta.UK 's design, and adds a trough for a TRRS 4-Pole extension cable to use the swipe reader. Square_Contactless_Power_Stand_ r2 .stl positions the card swipe in a diagonal position, matching the cant of the stand, where…
Shortened the bottom end of the shroud size to suite a 4 port model (FW4). Still suits a 120mm fan Printed with a MK4 perfectly, only had to make sure there were supports on each of the inside corners.
Needed an adapter for my Festool CLEANTEC CTL SYS to fit an mitre saw with a D38 sawdust outlet. The fit is snug but since I recommend printing with about 80% infil one can sand the adapter to get a perfect fit if needed. Recommend PETG…
I just aligned the holes correctly to make it centered. I like the spikes that @NossonSternba_855068 added. Magnets needed: 8 x (8mmx3mm) It's important to align magnets the same polarity on one part. North up on either one of the parts…
V19 - Optimised for 0.3mm layer height and adjusted design of grippers to remove need for supports. Shortened body slightly to speed up printing and help fit onto irregular shaped bottles. After speaking to a close friend who works in the…
a rack for the VP2440. I did not see anyone else design one yet so I made it. It is my first 3d model with fusion so will be updating it as feedback is received. Designed so that the protectli sits at the top of a DeskPi Rack. At the top…
I work at the hospital then I design this. No more touches on the surfaces at the public. Use with gloves or other hand covers. Desinfect the thing after use.
Remix of the tool created by NoobAmStewer. Modified the handle with hex shape to prevent the tool from rolling around. Created new blade holding blocks that fit much better. It prints correctly in my Elegoo Neptune 4 Plus. Note: The cap…
Minimise the risk of infection by opening doors and pressing buttons without skin contact. Print instructions Material: PETG Layer Height: 0.3mm Infil: 20% Perimeters: 4 Top Layers: 4 Bottom Laters: 4 Support: No
See atom's perfect-gridfinity-holes for instructions
I really liked to get the bed leveled out nicely and using the bltouch probe takes quite a long time. Especially when you rebuild your printer and start over. So I build a little holder for all kind of dial gauges, dial indicators or in…
This is my first attempt so hope it works out OK :) Supports are probably optional. Printing in PETG will work without supports for the overhangs. Modeled in Fusion 360 (source file included) so please feel free to improve!
Meet the Pumpkin Kitty Tap Wand; a card holder designed to securely hold a standard contactless credit or debit card so you can tap-to-pay without ever taking it out. Simply slide your card into the kitty’s head and you’re ready to cast…
A “perfectly useless sphere” or as I call it: “the most spherical thing I ever printed on an FDM machine”. Such an elegant and surprisingly easy to print design! Recreated in Fusion thanks to yet another great tutorial by…
The Festool bluetooth remote module is not compatible with the CTL SYS. Someone already created a solution to make the bluetooth kit compatible: ( https://github.com/jenskueper/festool-ctl-sys-bluetooth ). Inspired by this solution I…
I would print one for each side of the glass lid. Print face down with supports and zero for raft.
Adapter umożliwia podłączenie piły Festool CS50 lub CS70 (CS 70 AB 488292) do odkurzacza CTL MIDI. Filament: PETG Wypełnienie: 20% Ilość obrysów: 4 Brim: 3mm ---------------------------------------------- The adapter enables the Festool…
This is a mounting bracket for the Protectli V1410 gateway. I drew this to use M3x12mm socket cap screws with a washer.
I created this base for my sister's drawing tablet, it answers 3 pain points: Have a thicker/supportive edge where she could more easily rest her hand Keep the pen always at hand in a nice, accessible position Be reversible as she changes…
A contactless rotary magnetic encoder for fischertechnik with I2C 3,3V interface using the newer white square AS5600 modules. Comes in two versions, the 30x30mm version is more compact, but in many cases you'll want the 30x45mm version,…
Self-Draining Soap Holder – Redirects Water Back to the Sink I made this soap holder because I got tired of mushy soap and messy countertops, or having to manually remove the water from the soap dish all the time. I designed this soap…
I sometimes want to mount my bowl or vase on the lathe in reverse direction for sanding or light finishing touch-up but I want to keep the alignment of the chuck that is still mounted. I then drive the bowl with a soft prop chuck and…
Contactless rotary encoder based on the AS5600 hall sensor for the fischertechnik construction toy system. It uses these kinds of boards available from ebay and others. Please note that the board's "PWM" connector actually will provide an…
Case for truthear hexas, with magnetic cover and a space for some cover art
If necessity is the mother of invention, then emergency is surely its father. Needing to deploy a contactless card reader for a mobile health screening, but having no housing with which to do it, a coworker asked if I could 3D print…
Deutsche Verkehrsschilder 283, 283-10, 283-11, 283-20, 283-21, 283-30, 283-31 „Absolutes Haltverbot“ in Originalgröße von 600 mm. Du benötigst einen mehrfarbfähigen Drucker oder musst unterschiedliche Elementhöhen mit Filamentwechsel…
Update 2026-07-12: A v2 file has been added, which features some reinforcements to make the overall flex less, and to improve the PSU holder. A modified version of the VP2440 10" Rackmount by Andrew Plaza (…
This started a long time ago. The problem I wanted to solve was to make a coffee spoon (Kaffeelot) to fill the right amount of ground coffee into the machine. I had one if these iconic conical spoons with a rounded cap. My design had to…
Bacchetta tap-to-pay per pagamento contactless a tema stitch Nessuna colla necessaria per la versione monocolore, stampi, inserisci la carta e divertiti a pagare. Adatto a tutte le carte di pagamento, ho dovuto creare un tappo vista la…
Tired of crooked electrical outlets? Here's a simple yet effective tool I designed to make sure your wall sockets are installed perfectly level —every time. This 3D-printed tool is designed to fit most standard outlet frames. It holds a…
Bumper Functionality: Adapt to the shape of the filter box when closing the Air Manager hood and limit all kinds of leakage that can be induced by flow differences between the outside and the Air Manager. The bumper seals the interface…
Background A struggle I often have with putting up pictures is getting them level. I can sometimes balance a level on a frame, but it's never very easy, and frame will eventually tilt since it's hanging on a round nail. I wanted to design…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Due to the Corona crisis and government measures, only a certain number of people are allowed to stay in a shop at the same time in Switzerland. This can be difficult for smaller shops to control. Some shops solved the problem by…
modified model to fit my Bamboo Pen. After I unearthed it from storage I first got frustrated by the drivers not being supported, then I found out that there are community drivers out there and that i don't have to deal with new hardware.…
I couldn't find a mini rack mount for my Protectli FW6A Firewall so I decided to make one myself, adding RJ45 Keystones to get the interface ports to the front. The Protectli website says that the FW6A/B/C all have the same dimensions,…
This adapter inserts into the inverted Lagun post to allow the table to be mounted directly on the post without the swing arm. See full description here . Print upside down (which should be the default orientation of the files). No…
