Liczymy pasujące modele…
A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…
All of us have at least once seen our towel flying because of the wind, well with these clips the beach towel will remain where you left it, I hope you like the idea and the design inspired by waypoints, the design is designed to be as…
NEW DESIGN: https://www.printables.com/model/264994-brembo-brake-disc-v2 Just a Brembo Brake design. It had textures too but Fusion didn't let me export the textured file. Please comment if you have printed it and let me know for any…
I've redesigned this model and release it exclusively on MakerWorld: https://makerworld.com/en/models/207490-ams-wall-mounts-v2-0-fits-all-ams-versions#profileId-227597 This design is heavily inspired by the Wallmount for Bambu AMS model…
I liked the idea and found nothing alike on thingiverse. so i made this EDIT: Some people are having issues with the cartridges falling out. i dont know why it works for some people and some dont. To avoid issues i added two test files.…
Woohoo! A new model! :D I made this model primarily in TinkerCad for the 2023 Business Card Holders contest [here] . I just barely finished before the contest closed. ^^" The examples were printed on a Dremel Idea Builder 3d20. No…
EDIT 2022-07-17: I've made a new, improved version of this. Consider this obsolete. New model: https://www.printables.com/model/243613-battery-adapter-einhell-power-x-change-general-pur I altered the original thing so that i can use…
[V3 available now on MakerWorld: https://makerworld.com/en/models/1521236-phone-holder-for-hammocks-tents-rope-lines It's now even smaller and all tolerance issues are fixed] Hammock Phone Holder V2 - Now even lighter! New updated…
This is a WORK IN PROGRESS, I dont think this can be printed yet. WARNING! Update 1, separated the bow, pickaxe, arrow and radio. If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of…
This stunning mask represents both elegance and power , featuring a face with perfectly sculpted features and dramatic horn-like curves that crown the upper section. With its mythical and divine aesthetic , this design feels like it…
This is a prototype replacement shell for the Thunder B airsoft grenade, my first test print fits perfectly on my grenade, just make sure to print the filet with a low layer high like 0.1/0.5 for a better seal/fit. You will need the best…
Can't believe i have to specify this but apparently people can't read. This is just the BASE for the bearded skull not the skull itself, if you post a make of the skull without this base i will have it removed as it's not relevant and…
size up to 190 mm and don't forget supports
!! Do not print this (yet) !! Small Update 20.09.2022: Pictures of the MVP are now up, and I still have some software bugs, but everything mostly works. The parts uploaded can build a throttle, but I'm still far from the finished product.…
This STL works better the larger you print it when slicing. After several tests with my .4mm nozzle the details weren't all visible until 180%. I like to keep X & Y at 180% and leave Z lower ~115% to keep them nice and thin (use .gcode or…
Mounting plate for the glove80. This is meant as an alternative to acrylic mounting plates. This mounting plate is tested and confirmed working. However, please note that it is 3mm thick, which may be thicker than the acrylic mounting…
It is NOT advised to print this model unmodified. You will at least need a Dremel to even out the rough areas. I uploaded this model because I wanted for it to get out for others to improve. Not that I'm pushing the responsibilities on…
Print with a 0.12 layer height.
Updates 29-09-2024: Uploaded a 5-piece split model (inform me if it doesn't fit your printer) 26-09-2024: Uploaded the complete file of the front fender. (.step and .stl available) 01-05-2025: After some trial and error, we found out that…
New model can be found here https://www.printables.com/model/1732593-sim-button-box-mounting-system adjustable clamp to mount button boxes to a desk or rig - will fit Ikea desk tops. the lower bolt protector can be removed for a thicker…
I printed it 98% so it pressfits into position. Vary depending on the tolerances of your printer which is surely better than mine. Stampato in scala 98% cosi che si incastri perfettamente a pressione, vedete voi in base alle tolleranze…
Commercial Use and Attribution Notice: ACOS Termyte Cyberdeck © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses…
Cura Profile Description – Lightweight 3D Printed Flying Paper Airplane This .curaprofile file is specifically designed for 3D-printed airplane models that mimic the appearance of paper airplanes — and are meant to glide through the air…
Better and tangle free version of my first model. rolls smooth and the Filament does not get stuck on the sides. -All parts are interchangeable with the old model. I Recommend the Pro Variant with the filament guide rings. -9,5mm Spacers…
compact case for flipper zero and wifi module. you can find the COMBO CASE V2 Here
1,5 - 0,25 inch 45 Record Adapters - Contest Model - Correct Version Now. Sorry I had made a big mistake in my first upload. ATTENTION!!! There was a change in the match schedule. Initially, the opening diameter was specified as 0.25…
UFO as described by Bob Lazar
This is a Hollow Knight wall art piece. Any printer that can read M600 gcode commands can read my provided gcode file. NO MULTI-COLOR PRINTER REQUIRED, the different colors are at different heights, making it so any printer can print this…
Blueretro case for minified ESP32. Will work with PS1, PS2, PS3 (via adapter), XBOX 360 (via adapter). Recommended material: PETG/ABS/ASA. Will work with PLA but could deform since ESP32 gets kinda hot. What is blueretro? BlueRetro is a…
NOTE: THIS MODEL IS NOT TO BE 3D PRINTED. PLEASE KEEP READING This is a model of the 3rd-gen french MBT Leclerc tank. This is based of various 3D models from various websites, with the purpose of being the most realistic Leclerc model on…
https://lucid.app/lucidchart/eeb83864-a3c2-473e-9b07-77b7d2521d9e/edit?view_items=6sXo5eQszkfr&invitationId=inv_0da78ed4-2ba3-473c-a44d-6dd950fdc489
The model needs to be printed in vase mode (or whatever the setting is called according to your slicer). In your settings for vase mode, you will need to make the wall very thick to make it stronger. I used the trash bin to put failed…
Materials: 1)Plier ( to remove support material) 2) Sanding paper ( to finish the surface) 3) Paint ( if you cannot print it with colored filament) Assembly: 1. Assemble the planter as shown below. 2. Before you add soil, insert two…
This is a little box for herb storage, made to fit inside the Pax Vaporizer case from this link: https://www.printables.com/model/705119-pax-23mini-vape-charger-case-combo-storage But you can always print and use it however you like, as a…
[V3 available now on MakerWorld: https://makerworld.com/en/models/1521236-phone-holder-for-hammocks-tents-rope-lines It's now even smaller and all tolerance issues are fixed] New version now available. Smaller, lighter, more angles:…
New/alt ver - https://www.printables.com/model/1039681-new-nintendo-3ds-battery-extender-n3ds-supports-fa I made this N3DS grip case to support the expanded 5000mah battery made for the original 3ds. the grip includes a spacer to adapt…
Behold the "Cheezy Pen Holder" – the wedgiest and wittiest desk accessory you'll ever need! Crafted with the precision of a cheese connoisseur and seasoned with just the right amount of humor, this 3D model promises to add a dash of gouda…
WARNING: I had to make the walls very FLIMSY so the larger sleeved cards could still fit. Use at your own risk Please measure the files to make sure that your version of card sleeves fit and modify if needed. (i provided my F360 and STP…
FITS GLASS 5mm AND BAMBOO MAX 16mm IN DIAMATER This Is a hang on the glass style Holder For lucky Bamboo. the bamboo plant I have is from IKEA but make sure to measure your plant before printing to make sure it fits. print upside down,…
I print the stand inverted and support the long bridge by 2 or 3 small support bim each side. Dont forget to add support for the bearing bed as well! Caution: This spool holder should be use with an extra filament guide to guide the…
5-24-2026 - new mounting system can be found here, https://www.printables.com/model/1732593-sim-button-box-mounting-system For use with https://www.printables.com/model/82763-sim-racing-button-box Similar to my desk clamp for the same box…
“Mini All-In-One Printer Test” Remix! Use the Blender file to generate new Filament Cards. Just change the text (you might want to temporarily turn off the geometry node, to prevent lags) and export the filament card as .stl again.…
I printed some of the original clips and noticed, that my label printer stickers won't fit them. So I enlarged the original 10mm ones to 13mm for a perfect fit.
For me there is a slight elephant's foot from printing them on their side that helps keep the fit extra tight, but you can shave some of it off with an x-acto knife to adjust the fit Model in pictures printed in PLA, TPU probably works…
One time I was searching online for something to hold my headset, but I couldn't find anything that would either fit on my printer or was cost effective on filament. I came up with this design to attach to my adjustable Husky table for my…
This is an experimental model for providing a cheap means by which to give a pet a prosthetic leg. Inspired by a kitten born into our home missing a leg, this model hopes to explore a means by which to potentially restore some mobility.…
Designed to work with Nestea's Steam deck stand . I wanted to create a mount to firmly connect my steam deck to a small PCB keyboard for desktop use (and to have a good charging location). Add rubber feet on the PCB to avoid sliding. I'm…
You ever want to make your build truly yours? Add a headache Rack to your semi for the ultimate built to show off to your friends. The headache rack Pack is here. https://www.printables.com/model/1372507-rc-semi-headache-rack-pack Print…
IMPORTANT UPDATE There is a newer version of the phone mount for VanMoof, which includes cradles for multiple phones and will be updated in the future. This version here will not see any updates in the future. You can find the newer…
Nozzle:0,4, Layer: 0,2, Supports: Yes The model was printed in PLA.
Printed from PETG: Extruder #1 - Body - orange Extruder #2 - Numbers - black Extruder #3 - Windows - clear Enjoy!
NOTES: New version available! Completely redesigned, requires no drilling, and now only uses 1 PC4-M6 fitting: https://www.printables.com/model/1272790-knurled-pc4-m6-filament-fitting-adapter-with-funne If you're still reading and want to…
Please follow the tutorial I created in the YouTube video listed below.
UPDATE 19/10/2025: Since I've been making more designs, I decided to group them all in the original model page and deprecate this. THE MODELS IN THIS ARE OLD AND NOT UPDATED Check it out for the updated parts and more designs! PRINTABLES…
UPDATE July 6th, 2025 - updated the model to not need supports now, also added a blank bracket to add your own HWS insert, instructions below on how to do it in your slicer. Instructions to add your own HSW insert optional Step 1 Step 2…
This here is a curve of radius 40, not 44 as would be required to have a perfect 16 stud offset parallel circle. If you want a circle in parallel of the original size offset by 16 studs use this model instead…
UPDATE 2: I have had reports of the existing profile not working well. I apologize to anyone who has had issues with the current profile. I have developed a new print profile and have replaced the 3MF with a new one. This has a new…
CURRENTLY PRINTING!!! Expect slight overhang on the stairs, i was going to cancel the print but then im like hey, this is a spooky tower, the overhang makes it look even spookier and its very slight. So yea it works xD ill post a make as…
Wavy Panel Vase Introducing My Exclusive Planter & Vase Collection! Elevate your indoor gardening game with my unique and stylish planter and vase designs. Whether you're looking to add a touch of elegance to your home or office, or…
Simple part to separate drawers to 2 then another part to make it 4 Link to drawer set Print instructions -No special instructions -Printing orientation should be obvious
OUTDATED: This model was kinda bad so I made a new one which seems to be much better and easier to install. You can find it under my profile or here Hello! I wanted to buy and mount a Hemera Revo XS on my sidewinder X1. I found that there…
Check out my newest version of this cart holder here! – Nintendo Switch Cartridge Holders! – Please let these prints cool ON the bed! If they warp, they will not sit flush! I wanted a small cartridge case to replace this , which was too…
There once was a mount for the Gen7, Whose endoscope fit like a glove in, No supports did it need, For it was easy to seed, And its slimness the users did love in. A 3D-printed delight, It held endoscopes tight, With a set screw to…
This is the second version of my headset holder. One time I was searching online for something to hold my headset, but I couldn't find anything that would either fit on my printer or was cost effective on filament. I came up with this…
DIY Neon led lights tutorial Ever since I found out that you can fake neon lights with LED strips I wanted to make something with it. I’ve got a 3D printer, so printing the shape seemed no problem, LED strips are easy to come by, the only…
Please Read descritpion before printing Those are 70mm foot for the Ender 3 S1 PLUS to help with the motherboard and PSU cooling. They use the original Rubber feet. NOT COMPATIBLE WITH ORIGINAL BOTTOM STEAL PLATE. I made a Honeycomb…
This is a remix of a great stand for the steam deck. If you don't have the case listed below please consider printing the original of this dock. NOTE: This remix is to allow allow the steam deck to still fit on the dock while in the JSAUX…
Dice Tower Made of Nested Cubes This unique dice tower is built from several nested cubes, combining functional gameplay with a clean, geometric design. The classic dice pips are designed as openings, allowing you to watch the dice as…
When soldering the original stepper motor mentioned in the original model I destroyed it because I applied too much heat to it. Since it was damaged already I opened it up, saw a few wires hanging out. I've learned some electronics almost…
So why is this supposed to be a tool? You can't do anything with it or can you? You can. Imagine this: A: “Have you repaired the lawn mower?” B: “No, I haven't got around to it.” A: “You haven't got a round TUIT you say?” B: “Yeah.” A:…
Side sections for base This is a star wars empire version of my wryland design which is linked with this model. Tray design included
I love the insert by Hextra. But I prefer to store my games vertically. So I designed a little "spacer" to fill in the gap below where the manuals/scenario books go. It goes above the Chapter IV and other smaller token tray areas. I also…
14.04.2025 Update: I uploaded a redesigned and simplified version that features a much stronger and more reliable spring. https://www.printables.com/model/1268153-52mm-lens-cap-improved-version 52mm lens cap - no screws or springs…
Temptrol / Spindle extension for Shower Set Wall Mounted Concealed Shower Faucet System. 20 tooth spindle. External diameter of 7.5mm, slightly oversized for snug fit. Shower wall had to be straightened so final thickness did not allow…
Print with supports. I scaled the model up so that the arms were a bit thicker. Workflow to create: Chatgpt image with prompt: "Create a standing Spinosaurus with a white background" Then I took this image to the free online Rodin Ai tool…
The 3D Chameleon is an interesting 3d printer addition but I found it to be quite a pain to get it working reliably. Bill from 3D Chameleon is a fantastic helper and always quickly responded to my questions. I really like the concept but…
its a simple glue holer for the neptune 3 pro !!! the scraper need to have the glue support under it!!!
Updates: I finally tested the rear cap fitment and found that they were a bit tight. I've since replaced both the rear cap and the pods with updated files that have better fitment. Sorry to those that may have already printed these…
Description A modern and functional Instagram logo keychain featuring an internal cavity for an NFC tag. This design all
IMPORTANT!! If you plan on using the mountains + aqueduct together, please remember to scale one or the other to whatever tolerance you see fit. I HAVE NOT DONE THIS!! In addition, the file attached contains both the aqueduct and terrain.…
This is a simple inspired Lockcard wallet. I printed at 15% infill and it took about 15 minutes. I used PETG, but I think other filaments will work, besides TPU. If you have any questions, feel free to contact me. If you want, you can…
Looking at the AMS Bambu Lab, I had trouble remembering what kind of filament is inserted. The holder attaches under the original grip. I am not opposed to constructive criticism :-). Holder was printed 0,2mm layer, 15% infill, 3…
Make sure to choose the correct file for your type of battery. You need something to poke the pin out to remove the original pad and to reinstall it for the new one, I used the straight pick from a 2$ set from Harbor Freight. (Check the…
So after a few weeks of iterating and testing, I now have a design that actually works. You can find that here: https://www.prusaprinters.org/prints/72725-bicycle-pannier-hook-for-10mm-tubes Leaving this one here, but it's far too wimpy.…
You might ask why 8 calendar years later I am still stewarding this design consisting of a mashup of Big Ben, the Eiffel Tower, and the London Monument. The answer is that over the years I've had to keep fixing it via various repair…
FOR SUPPORTS< USE TREE SUPPORTS!! This is a work in progress, i will be actively updating this model. the smaller joints go on the arms, the longer joints go on the legs, and the mini joints go on the top socket of the joints.
https://www.myminifactory.com/frontier/dungeon-x-5674 ======================================================================= for personal use only. Support Free Models; FDM Friendly if you want to sell your prints, subscribe to…
@Ervin : Thanks for your nice toy hammer model! I remixed it slightly, both to make it easier to print (flattened the rounded bottom of the business end) and adjusted the opening to fit an existing handle for a toy hammer our grandson had…
Update 2022-02: Just finished a revamped new version that works with any module ! Check it out, it's the way to go. Ultra low profile DJI Goggle module mount / case system. Easily fits in the goggle bag with antennas on or easily removed.…
More notches for plant identification. You probably know what they are for... Please give a HEART for the download! We like to collect them. ;-) PRINT SETTINGS: Total time → 0,5 Hours Number of print files → 2 Layer height → 0,2 Layer…
Tired of the old sad twitchy spool attachment system on Ender 3 Pro. Say no more. Here I bring you brand new attachment system for any spool with hole in the middle with diameter up to 8 cm. Takes about 5 hours to print with 15% gyroid…
I designed this box to mount directly to the 2020 extrusion of my Ender 3 Pro 3D printer. This allows me to tap into the 24V dc output of the power supply and convert it to 5V to power the LED light strip I installed on the printer. In my…
This is for 42.4mm shop vac hose and a 7mm and smaller sander wire.
A simple Nozzle holder for v6 nozzles with a m6 thread. This nozzles are installed on a mk3/s/s+ for example. The holder fits 4 nozzles, the slots are described with 0.25, 0.4, 0.6, 0.8, to prevent chaos in your nozzles. I added different…
Six slot charging station for use with the Anker charger at this link: https://www.amazon.com/gp/product/B00P936188 Print the top inverted or with supports. Print 6x of the dividers You'll need some small screws to assemble it. I forget…
Very hard to print, I used A1 Mini to print but antenna snapped off as its so thin, less than a mm, might struggle printing on ender 3s and printers alike, non bedslingers would be best. I highly recommend scaling the model up for a…
Based off of the Umbrella Cockatoo and sculpted the head/beak in Blender. I modeled the cylinder and the feathers in Fusion 360. This took me about 7 hours to make everything. I added the AMF file so you can use my raft/support settings…
In school i found a penguin eraser in the library and named him Gerald. All of my friends and I loved him, we even made a shrine for him, he was powerful, but one day we had a mass evacuation drill and I stupidly brought him with me. My…
⚠ SAFETY WARNING & DISCLAIMER This model is a community-created remix and is NOT an OEM part. It has not been safety tested or certified by the original gate manufacturer. By downloading and using this file, you agree to the following:…
![Business Card Dispenser [read description]](https://media.printables.com/media/prints/370575/images/3157987_7211067c-1b03-4467-8607-b4521b0269d0/keeppic1-2.jpg)
![[Obsolete, see description] Battery Adapter Einhell Power X-Change General Purpose](https://media.printables.com/media/prints/98138/images/995211_146f8637-c194-46c0-8805-e848ebb6f784/50b86a246f04e58914ef95d404af139e_display_large_98.jpg)
![Hammock Phone Holder V2 [Old version, check description for new one]](https://media.printables.com/media/prints/582669/images/4663470_91478c1f-81a2-4074-8058-87f119204b7e/lighterhanger-v21.jpg)
![[ACOS] 'Termyte' Pocket Cyberdeck READ THE DESCRIPTION!](https://media.printables.com/media/prints/4b11cf42-a42a-4868-9017-494e961eabe4/images/10167135_79f69c3f-07e4-4e54-9c17-46ab987c4ca6_76c9adac-6106-44be-91b0-19612fc2fe9b/img_5446.jpeg)
![DIY Blueretro 5in1 [PS1, PS2, PS3, XBOX360] - guide on description](https://media.printables.com/media/prints/629834/images/4989945_188c260e-8dd5-41da-a0ac-36ffe29a7357_91bded45-4751-4250-9ef1-fa21992d5f44/photo_2023-10-28_23-53-27.jpg)
![Herb Box for Pax Vaporizer Case [Check Description for the Case Link]](https://media.printables.com/media/prints/705919/images/5538669_7055d50e-be23-4379-96a0-053a71de9784_400f7731-c4be-42be-80da-203238f3f178/img_7357.jpg)
![Hammock Phone Hanger [Old version, check description for new one]](https://media.printables.com/media/prints/567523/images/4544006_da238786-595c-4c11-af72-3fc94ce9ae77/secondhangerbetter-v17-2.png)
![Phone Mount for VanMoof S2/S3 [Legacy, newer version linked in description]](https://media.printables.com/media/prints/41892/images/418608_27bb6a0e-767c-4f68-becf-206b6da75dc2/vanmoof_s2_smartphone_mount_2020-oct-02_09-28-49a.png)
![[DEPRECATED, see description] 52mm Lens cap](https://media.printables.com/media/prints/1208679/images/9075652_d457a43a-55ff-4176-bb94-9a87b56b0149_ff18f2ba-c725-4aab-8608-928424612352/dsc7262.jpg)
![Morpheus - Dungeon X Frontier [link on description]](https://media.printables.com/media/prints/b3ba3dfa-f8d3-4239-8f04-499ec7fe4e1d/images/13059378_8c18a30d-8696-439c-b25a-e6e8eb5a7e4b_8793b1c8-ef71-432b-add2-d7916aeb9ea1/dx-02_premarketing_render_print_free.jpg)
