5159 modeli
Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…
Wydruk około 2,99 €–3,65 € nettoWstępna wycena jednego wariantu
This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
Print-in-place tape dispenser. Almost takes no more place than the tape-roll itself, so it can fit in your pocket. No supports required. Tested with PLA and PETG, may also be printable in ABS and any other rigid materials. The design…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Custom-Designed Dispenser to fit Pokémon Booster Packs up to x43 packs for the single dispenser & x86 for the double dispenser lid is optional depending on your needs. The Dispenser prevents damage to booter packs, warping & UV…
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
The 3D modelled Solder Paste and Flux Dispenser is a compact and efficient device, perfect for electronics assembly. Its ergonomic design makes it easy to use, with adjustable dispensing volumes ensuring accurate and consistent results…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…
Wydruk około 3,45 €–4,21 € nettoWstępna wycena jednego wariantu
Has mundane office work left you in a dire need of excitement? Inject some dark thrill to your desk with this latest invention, Guillotape: The Guillotine Tape Dispenser. Imagine the Addams Family meeting the French Revolution in the…
Wydruk około 3,01 €–3,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holds 10 rolls of bags and has screw holes to be wall mounted, or use two sided tape/Command Strips to attach. Bag rolls are about 30mm in diameter and 61mm wide, so this dispenser might work with others. Initially designed without the…
Wydruk około 8,50 €–10,39 € nettoWstępna wycena jednego wariantu
UPDATED STL FILES An actually useful remix of the classic toilet paper holder. This one can actually be used to dispense the paper. A fantastic gift to give to your friends. Printed from black PETG. I use an epoxy glue to connect the…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wanted a single piece print for the can dispenser, and just placing the parts together in prusaslicer was leaving wall lines in the part where the connectors were, so reworked it in fusion to make each side be a single part with no…
Wydruk około 5,66 €–6,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy to print. No supports needed. Simply load flossers as seen in picture, insert twister, snap on base. Designed to work with Meijer brand interdental flossups . Also works with Aim brand precision floss picks (thanks @Lacemaker!). Will…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
Nuka Cola Dispensary / Vending Machine. Make it into a piggy bank. Or use it in the dice tower contest. I find this model very satisfying to look at. I think I am a sucker for Nuclear Age style artwork.
Wydruk około 19,01 €–23,23 € nettoWstępna wycena jednego wariantu
This card tower is designed to hold both the Karak and Karak Regent expansion cards. For Carcassonne, it has been tested with the Basic game and the Inns and Cathedrals expansion. For optimal use with Karak, I recommend pairing it with…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…
Wydruk około 4,84 €–5,92 € nettoWstępna wycena jednego wariantu
This model is designed to help with sowing seeds. The top part can be rotated, so that you are able to regulate the number of seeds coming through. 1 … smallest hole, 2 … medium hole, 3 … biggest hole, X … the dispenser is closed. OPEN ……
Wydruk około 0,85 €–1,03 € nettoWstępna wycena jednego wariantu
Pill Dispenser is a device to help people to remember to take medication as required, on an hourly or daily basis. A simple pill dispenser allows people to gain access to the pill at any time. The dispenser includes 3 single doses of…
Wydruk około 5,70 €–6,97 € nettoWstępna wycena jednego wariantu
Specs Holds bag rolls up to 35mm diameter, 65mm wide. ✅ AmazonBasics ✅ Frisco … and many others! Print tips 🧩 2 parts: Main body and “pin”. Print separately for cleanest finish. ⮑ Print body left side down. Print pin upside down. ✨…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
I got a new Nespresso machine (Vertuo) for my birthday. I have decided to rint my own dispenser for the pods. I wanted something useful and easy to print. The model comes with 2 parts: Bottom and Cover. Those parts can be fit on a Prusa…
Wydruk około 4,54 €–5,55 € nettoWstępna wycena jednego wariantu
This is a dispenser for tampons. Made for diameters up to ca. 20mm and a length of 55mm, e.g. “o.b. comfort super plus”. Holds around 15 - 20 pieces. Ideally the pieces roll down the slope. Sometimes they can get stuck. A little shaking…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena jednego wariantu
This remix is based on frez_knee/bandslinger's dog bag container with the Flexi hook moved to a position that allows access to the bags from the side of the leash (rather than underneath) “Left” and “Right” versions are based on which…
Wydruk około 1,55 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I´m sure you all have tried it, getting through half of the box of plasticwrap, then the cardbord box starts to fall appart. So here is the solution. It works with plastic wrap and tinfoil. The only thing you need is, the saw blade from…
Wydruk około 14,08 €–17,21 € nettoWstępna wycena jednego wariantu
I couldn't find a “key” that had both parts on it, so I sketched this one up
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
First of all thanks to Ljhtom for this amazing design! The drink dispenser large Description: This dispenser was updated to deal with half liter cans (65mmx168mm) instead of the small ones. I also seperated some pins from the original…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
I have made updated model with lid and viewing ports, check it out: New version I present to you fully parametric boxy things dispenser - originally meant for dishwasher tablets. You can use it of course for anything with boxy shape.…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
June26 re-design note. @s0ren reported that in his print of the 8 can holder, he had problems removing cans (removal aperture not high enough). He had printed in PLA, I had printed in PETG, perhaps there was a difference in shrinkage…
Wydruk około 3,20 €–3,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Why The model that this remixes is a a really nice model but NZ/AU 330ml cans tend to slip as they are chamfered significantly at the top. Rather than alter the original model this model includes who additional pieces you can print to…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu
The dispenser is printed with Prusa's clear PLA and an 0.6 mm Nozzle. I recommend supports and a layer-height of 0.30 mm
Wydruk około 7,87 €–9,62 € nettoWstępna wycena jednego wariantu
I created that shooting patch dispenser to replace the standard paper patch dispenser while they get wet and don't work very well after a while. In case the lid is not holding as expected, a small tesafilm strap can be used to secure body…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I present to you fully parametric boxy things dispenser - update from my previous model now with view port and lid. You can use it for anything with boxy shape, I use it for dishwasher tablets. Saves space and I can't get over how…
Wydruk około 3,15 €–3,85 € nettoWstępna wycena jednego wariantu
I remixed the base of Cat Toy - Treat Dispenser Puzzle to use less plastic and reduce print times and print complexity. I also incorporated a spiral to act as a slow-feeder and increase cat engagement. Prints with a 0.4mm nozzle at 0.25mm…
Wydruk około 7,06 €–8,63 € nettoWstępna wycena jednego wariantu
Simple candy dispenser for small items such as M&M's and Skittles stored in a standard Mason jar. Regular mouth size. I used magnets (8mm x 2mm) to secure the knob. There is room for 3 magnets on both parts but I'm using 2 and it holds…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
What? A onehand operated tool that can squeeze a stick of churu or whatever liquid pet treat you wish, into a spoon that can be slotted into the device. Much like the ones you find on amazon: Why? You need the other hand to groom or wash…
Wydruk około 12,84 €–15,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
FA CTU brings a design that matters. This student-designed menstrual product dispenser was adapted for 3D printing to be accessible, easy to produce, and ready to use in schools, offices, and public spaces. The model is based on a design…
Wydruk około 7,53 €–9,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For those who either have less kitchen space, or less taste in coffee…
Wydruk około 5,18 €–6,33 € nettoWstępna wycena jednego wariantu
Simple Tape Dispenser inspired by Prusament Spool design Very simple dispenser for basic tape. Iťs designed for tape with total radius of about 5 cm, inner radius of about 2.5 cm and width 2 cm. But as you can see, there is some space…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
This tape dispenser is a one-piece, foldable design similar to 3M's tape holder, but enclosed. There are two versions for 1in and 2in wide tape rolls.
Wydruk około 2,74 €–3,35 € nettoWstępna wycena jednego wariantu
This is a small dispenser I designed to dispense cat food. I designed it around the Hills C/D cans, but I imagine it should accommodate most 3.3" wet food cans. The cans must be stacked in opposing directions in order to be able to pull…
Wydruk około 7,82 €–9,56 € nettoWstępna wycena jednego wariantu
I just needed a way of storing my Isopropyl cleaning wipes. I looked around on Thingiverse did not find anything that matched what I wanted, so I quickly made some measurements and created this storage box / Dispenser. The Swabs Measure…
Wydruk około 3,44 €–4,21 € nettoWstępna wycena jednego wariantu
For those of you who place solder paste on a PCB by hand using a solder paste syringe, this tool provides additional control and consistency to the application process. Parts Printed: Syringe Holder [A] Syringe Plunger [B] Knob [C] 1ml…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Der Klebefant hält immer etwas Klebefilm bereit und macht dabei auf dem Schreibtisch eine super Figur. Überall anders natürlich auch. Der Klebefilm ist so in dem Abroller befestigt, dass er nicht rausfallen kann, jedoch kinderleicht…
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
Features Easy, moderately quick print Quick one-turn screw on/off lid for easy filling. Lid rotates a small amount to open and close the dispenser hole. Knurled edges for easy grip. Assembly Assembly is very easy – just snap the top onto…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Artistic and ergonomic tape dispenser designed for office use. Compatible with usual office tapes. New GGvision studio creation.
Wydruk około 1,99 €–2,43 € nettoWstępna wycena jednego wariantu
A simple and effective dispenser for laundry or dishwasher pods. Mounted to the wall with two screws or 3M Command strips. Supports on for the overhang in the mouth of the dispenser. I printed in PLA at 0.3mm Layer height, 2 Perimeters, 3…
Wydruk około 8,40 €–10,27 € nettoWstępna wycena jednego wariantu
I design this model for my girlfriend She wanted a pads dispenser to make more elegant than just letting the box of pad in the bathroom. The cap snap in the box, i have print both of them in PLA I have pretty big hand but the hole is well…
Wydruk około 3,52 €–4,31 € nettoWstępna wycena jednego wariantu
Description This is a heavy tape dispenser, If you have never used one, a heavy tape dispenser allows you to pull tape from it using only one hand while the other is free to hold the thing you want to secure in place. The dispenser is…
Wydruk około 12,51 €–15,29 € nettoWstępna wycena jednego wariantu
This comes with a slider for 0.5 mm beads but I can made additional sizes on request.
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
I recomand scale 77% x 77% x 70% 17.3.2022 - Release version 1.0 29.3.2022 - Updated version - bigger pipe and better stop
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of bpopp's design found on Thingiverse ( https://www.thingiverse.com/thing:2502868 ). I added a 22.5deg wedge to the back plate so it could fit on the end of my butchers block clearing the underside of my bench top. The…
Wydruk około 2,26 €–2,77 € nettoWstępna wycena jednego wariantu
Large food cans could be easily stowed one on another because they fit easily (different-sized top and bottom rims). But small food cans does not have a such nice property, they tend to collapse when stowed one on another. Not anymore!…
Wydruk około 3,47 €–4,24 € nettoWstępna wycena jednego wariantu
A Halloween skull soap dispenser. Original idea is by one of my daughters, when we discussed what could be printed for Halloween… New 22.10.2023: Added the “Sagrotan Version”. Big thanks to nilson_fx for modelling the Sagrotan soap…
Wydruk około 3,22 €–3,93 € nettoWstępna wycena jednego wariantu
This is a little box for storing panty liners. The lid is optional, maybe for a vacation space that gets some dust.
Wydruk około 5,27 €–6,44 € nettoWstępna wycena jednego wariantu
for smaller tape rolls as original intended and as stabilization because original model can break easily while using. I added the freecad file so you can modify it. Instructions print original model print this model put a roll of tape in…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Tennis ball dispenser for small dog tennis balls (~48mm). Printed without supports in PETG. Has 2 integrated countersunk holes for screws to mount to wall.
Wydruk około 4,21 €–5,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
stackable tea bag dispenser V2 The tea bag dispenser can now be printed completely without support structures. The stacking technique has been further optimized and simplified.
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
This cat toy rolls, spins, and wobbles about quite easily on hard floors, and when printed in PETG, it's incredibly strong and flexible. It holds a couple tablespoons of dry kibble or a few treats inside, requiring either some paw-based…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.
Wydruk około 6,77 €–8,27 € nettoWstępna wycena jednego wariantu
Manually operated precision 3 part dispenser for 30cc and 55cc tubes/barrels. Does't require supports to print. Recommended layer height 0.2mm or below. 3-5mm of brim recommended. Takes around 4h15m to print with previously mentioned…
Wydruk około 3,33 €–4,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Okay you Sublimation Printer makers, you asked for it, you got it. :D A standard office tape dispenser is too light to use one handed. So here are a couple of spindles to use with large, heavy dispensers like this one...…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This isn't a very complex remix. All thanks to the original model including the .step file. I've added screw holes for real screws and included hollow areas that can be filled with buckshot, fishing weights or sand (if using sand wad some…
Wydruk około 10,35 €–12,65 € nettoWstępna wycena jednego wariantu
I really love Tea Bag Dispenser - Faster Stackable Interlocking by pwnate , but it won't work for Celestial Seasonings teas, which aren't individually packaged. In my case, I not only needed to leave space for CS boxes, but I also needed…
Wydruk około 3,95 €–4,83 € nettoWstępna wycena jednego wariantu
Fetching tape is my favorite method of attaching my feathers to my arrow shafts. It is a bit tricky to handle the double sided tape, the feather and the shaft. There is a commercial dispenser available, but I like my version better. The…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
EN This is a dispenser for women’s hygiene products, intended for use in public restrooms (schools, offices, shopping centers, etc.). As of January 2026, a regulation comes into effect in the Czech Republic requiring the provision of…
Wydruk około 11,47 €–14,02 € nettoWstępna wycena jednego wariantu
Needed a gauze swab dispenser for my newborn ;) Design By myself in Autodesk Fusion 360 Print Prusament PLA Galaxy Silver 0.3mm layer height 5 % base infill from 2.00-11.00mm 25% infill for first layers (<2.00mm) and towers (>11.00mm)…
Wydruk około 8,71 €–10,65 € nettoWstępna wycena jednego wariantu
Designed to hook onto one-another sideways and stack vertically to create an array of label dispensers. I use them for 2" circular labels from my thermal printer. Designed to that a label cane attached to the front to show the contents.
Wydruk około 4,18 €–5,11 € nettoWstępna wycena jednego wariantu
This single bead dispenser requires three non-printed components: 1xM3*16 hex screw 2xM3*4 hex screw A suitable spring that fits in the chamber, I used a 12 mm diameter x 100 mm spring Watch the below video on how to assemble and use:
Wydruk około 3,88 €–4,74 € nettoWstępna wycena jednego wariantu
Dies ist eine Ersatztülle für einen knapp 50 Jahre alten Sahnespender. Sollte die Tülle so leicht aufsitzen kann diese entweder lackiert werden (Achtung: Lebensmittelechten Lack verwenden!). Alternativ kann das Modell auch 1-2% kleiner…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
ACME thread adapter for a Solo 330 Aerosol Smoke Dispenser. Had some very hard to reach smokes that the Solo pole would not get to. Made a ACME Female thread adapter to fit on a various number of painters poles. Now the sky is not the…
Wydruk około 3,84 €–4,69 € nettoWstępna wycena jednego wariantu
This lid is designed to go on a mason jar and allows for a spinning disk to close the opening. It wouldn't be water tight, but should keep anything the size of rice or bigger inside. If you line it up on the build plate, it can be printed…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena jednego wariantu
Description A simple, yet stylish dispenser for doggy poo bags. Printing Options The enclosed 3MF PrusaSlicer model files include: A version for single-color model with no embossed image (smooth top and bottom) A version with a bone image…
Wydruk około 2,69 €–3,28 € nettoWstępna wycena jednego wariantu
This is a simple Skadis holder for C cells (26500) inspired by popular AA / AAA dispenser type. The “holding bar” may not be necessary, but it helps with stability and better cell distribution. Small bed support are needed for the hooks.…
Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu
I tried a few trash bag holder / dispenser designs and they were pretty good. Ultimately I made this, combining the features I needed and avoiding the snags. Handle a variety of brands, roll sizes - especially larger ones (we usually use…
Wydruk około 19,82 €–24,22 € nettoWstępna wycena jednego wariantu
Daily contact dispenser with separate slots for left and right blister packs. To use simply pull the slide towards you and the blister pack will slide out. Overall dimensions are roughly 70 mm wide by 87 mm deep and 195 mm tall, which…
Wydruk około 5,63 €–6,88 € nettoWstępna wycena jednego wariantu
We buy the mesh sacks of BabyBel cheese at Costco, but they always end up either difficult to remove from the bag or strewn around the shelf. This dispenser neatly holds 18 small wheels of cheese that can be individually removed. This…
Wydruk około 1,30 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dá se použít jedna nebo dvě gumičky pro zvedání kondomu.
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Are you tired of boring store-bought soap dispensers? This 3D printable cover transforms your soap bottle into a stylish bathroom accessory! Here's why you'll love it: Easy & Sustainable: Forget printing a whole bottle! This cover prints…
Wydruk około 1,52 €–1,85 € nettoWstępna wycena jednego wariantu
I needed a holder for the Alcohol Prep Pads that I've been getting from Walgreens that come as a pair of pads. This is designed to sit on a counter/desk/flat surface and hold most of a 400 pack of alcohol pads. My MK4S isn't tall enough…
Wydruk około 7,87 €–9,62 € nettoWstępna wycena jednego wariantu
My printing of the dispenser module internal failed because the waterhose connector has only a very small connection surface to the printing bed. Everytime the main module and the waterhose will filled up the printer pushed the waterhose…
Wydruk około 5,57 €–6,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bouillon Cube Dispenser Simple dispenser which allows organization of bouillon cubes with a small footprint in a kitchen cupboard. It's sized to fit Knorr cubes available in Switzerland. Fusion 360 file is attached to easily adapt to your…
Wydruk około 4,46 €–5,45 € nettoWstępna wycena jednego wariantu
Hey there, lets fight the #corona-virus. In germany we are running out of disfectant dispensers because of the hight demand. A clinic asked for it and as I didn't find a model in the web I made my first more complex contruction. Its a…
Wydruk około 5,47 €–6,68 € nettoWstępna wycena jednego wariantu
This is a wall-mounted Cotton Rounds dispenser. The design was done referencing the Swisspers brand of Cotton Rounds but may work for others. Wall mount fastener holes are sized for #6 pan head screws, so any drywall anchor or wood screw…
Wydruk około 12,52 €–15,31 € nettoWstępna wycena jednego wariantu
Cats survival instinct makes these furry companions tend to drink water from above the ground level to avoid poisoning or bacteria infection. This little stand will help your pets keep their instincts intact and also let the spilled water…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Best results with PLA, layer height 0.7 mm, 25% infill and no supports. Created in FreeCAD. Printed with Prusa mini+.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Who doesn't know the small parts that fly around everywhere and when you need them, you can't find them. Very annoying. But wait, there is a solution. The Rotation dispenser from KMS. In 3 easy steps just pick your part: Select - Open -…
Wydruk około 2,73 €–3,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compact Tape Dispenser – Simple, Fast & Practical A simple and compact tape dispenser designed for everyday use and, just as importantly, for an easy and quick 3D print . The wide side plates keep the tape roll securely in place, while…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
Please consider leaving a review (with picture of your print), or a like. This really motivates me to keep uploading my models :) For the parametric file visit: Razor Blade Dispender AND Disposal (parametric) - Free 3D Print Model -…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A wall-mountable dispenser for 0.50 € cent coins. Easily accessible by swiping the coins out from the bottom. Scale shows the amount of money in €. Attach to a wall with adhesive tape. If you are interested in modifying the model to fit…
Wydruk około 7,19 €–8,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a dispenser for Sheba 85-gram cat food tins, hence the design. It fits 8 tins and is under 200 mm high, so most printers can fit it. Print upright, with supports.
Wydruk około 12,29 €–15,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was annoyed by soap dispensers giving me about 10000x more soap than what any reasonable person needs to wash their hands, so I decided to limit the pump travel distance. Snap multiple restriction rings onto the soap dispenser pump (see…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
A simple way to make a disinfectant dispenser. It is especially important now to wash your hands properly. The biggest problem I noticed is when I come back from the store or work I wonder if I will not transfer the virus on dirty hands…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
The center post for the tape reel is 24mm. Prints without supports.
Wydruk około 4,09 €–5,00 € nettoWstępna wycena jednego wariantu
Through a simple system we have a coin storage unit that, with a small manipulation of it towards the outside, can easily remove the coin. One side of the dispenser works with the denominations of 2 euros, 1 euro, 50 cents and 20 cents,…
Wydruk około 6,71 €–8,20 € nettoWstępna wycena jednego wariantu
Print settings: Perimeters: 4 Solid layers Top / Bottom: 5 / 5 Scarf joint placement: Contours Material: PETG Optional Modifier: Range 0.00-141.00 mm Fuzz skin: Outside walls point distance: 2mm thickness: 0.1 mm Required hardware: soap…
Wydruk około 3,44 €–4,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a cover for the IKEA EKOLN soap dispenser that is simply put together. I printed the parts on my MK4S using MMU3. All parts PLA 40% lightning infill
Wydruk około 19,45 €–23,78 € nettoWstępna wycena jednego wariantu
Halterung für eine Wasserspenderpumpe (5-Gallonen Flasche) um sie direkt an der Matschküche zu befestigen. Der Schlauch kommt dann in ein Kanister, Fass oder Eimer. Mount for a water dispenser pump (5-gallon bottle) to attach directly to…
Wydruk około 3,95 €–4,83 € nettoWstępna wycena jednego wariantu
It always bothered me that I couldn't get the last bit of soap out of Method hand soap dispensers apart from rinsing out the bottle and washing it all down the drain - this seemed wasteful and unnecessary. Using this coupling, I can now…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena jednego wariantu
A sturdy wall-mount holder for dispenser bottles with a maximum diameter of 70mm (2.75"). Designed for easy installation with screws, this holder provides secure and accessible storage for various bottles, including hand sanitizers.…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu
I designed a holder for my swimming pool to prevent chlorine tablets from dissolving near the skimmer. Previously, after 8 years, my skimmer broke, and the technician repairing it mentioned that the chlorine tablet was the cause. With…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tangle free 64 AAA battery dispenser. On my way to another (bigger) project about battery management, I thought you might like this battery holder or dispenser which stacks the batteries tangle free, which most holders I tried so far…
Wydruk około 1,97 €–2,41 € nettoWstępna wycena jednego wariantu
Dispenser for Stevia
Wydruk około 3,18 €–3,89 € nettoWstępna wycena jednego wariantu
A battery dispenser for the IKEA Skadis board. It holds both small LR1130 and bigger CR2032 batteries. Possible improvments: Currently it's a bit tricky to get out one battery - especially the small ones. Maybe an angled lip that pops out…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
![[REMIX] Drink can dispenser](https://media.printables.com/media/prints/360248/images/3059522_90cb9b33-534b-4364-92e7-ffff5913c7f5/pxl_20230106_223639680.jpg)
