Wyniki wyszukiwania: displ

Sortowanie

10 174 modeli

P
PrintablesRyan Millar

Display Shelf Wall Assembly (No Supports Needed)

These two models can be combined to make as large or as small as a display area as you need. Both being based on the same hexagon base, they fit together perfectly. Print as many as you like and display all of your awesome prints and/or…

Pobrania
10 533
Polubienia
4380
Ocena
4,95
P
PrintablesStrandedOrg

Hot Wheels Diecast 1:64 Scale 4-Post Car Lift Display (No glue)

This is a Hot Wheels / Matchbox 1:64 scale model of a 4-post car lift for displaying different size diecast cars. This is a remix of EG3Dprinting's 1:24 scale for Hot Wheels 1:64 scale. These snap together so you don't have to worry about…

Pobrania
4227
Polubienia
631
Ocena
4,88
P
PrintablesSaddamCZ

Display knife stand

A display stand for 4 folding or small fixed-blade knives. Comes in two versions, one "hollow" (blue renders and photos) and one solid (red renders). Print instructions At 100%, both versions come up 75 mm wide. Prints on its side without…

Pobrania
2348
Polubienia
281
Ocena
4,88
P
PrintablesRC_3DWorks

Desk organizer - display shelves

display all your bits and bops on these shelves - 15 x 5 cm shelves

Pobrania
2337
Polubienia
811
Ocena
4,33
P
PrintablesMatt Boyer

Infill Samples with Display Case

14 Infill Samples with a case. Everything can be printed on a Prusa MINI . Simply download the 3MF file to PrusaSlicer and change the printer type. I had great success printing them in batches of 2 at a time (split left and right) and I…

Pobrania
1933
Polubienia
1360
Ocena
4,85
P
PrintablesStrandedOrg

Hot Wheels Diecast 1:43 Scale 4-Post Car Lift Display (No glue)

This is a Hot Wheels / Matchbox 1:43 scale model of a 4-post car lift for displaying different size diecast cars. These snap together so you don't have to worry about extra hardware or glue. I've added added a wheel chock near the front…

Pobrania
1060
Polubienia
181
Ocena
4
P
Printablesromcoromcoromco

PSA graded TCG spots cards wall holder and display frame

Make your collection visible New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display PSA graded TCG spots cards wall holder and display frame.

Pobrania
978
Polubienia
206
Ocena
4,75
P
PrintablesJamie Claye

(Easter) Egg - 'chicken' legged display stand

Inspired by a few other similar designs, this little legged display stand can make presenting those special Easter eggs for the holiday even more adorable! Done in "two colors" so you can give the legs and feet a more traditional foul…

Pobrania
954
Polubienia
261
Ocena
4,83
P
PrintablesPeter Farell

PSA: State of AI : Dragon Egg : With and without Displacement

PSA: State of AI : Dragon Egg : With and without Displacement TRIPO used to create : “Cute Baby Dragon hatching from egg, realistic, masterpiece, HDR.” used HD texturing option We have entered a state wherein the use of displacement with…

Pobrania
602
Polubienia
127
Ocena
3,5
P
Printableskermitthefrog

Lego 2023 McLaren Formula 1 F1 Car Display Stand (MMU/AMS Friendly)

A simple display stand for the Speed Champions Lego McLaren Formula 1 Race Car (#76919). MMU/AMS friendly but they are not required for the single-color version. F1 logo is optional with alternative model files provided! This model…

Pobrania
510
Polubienia
115
Ocena
5
P
PrintablesJJ Designs

Lego Star Wars Minifigure Display Hexagons - 55 Accurate Factions

The most meticulously organized Lego Star Wars collection A complete list of 55 Star wars factions available to download: At Attin Black Sun Bondsman's Guild/Bounty Hunters Churches of the Force CIS Separatists Clan Djarin Clan Fett…

Pobrania
495
Polubienia
203
Ocena
5
P
PrintablesMatt Boyer

Fanatec Formula V2 Display Stand

A display stand for your Fanatec Formula V2 or V2.5 wheel. No supports. Printed in Galaxy Black. Can also be printed on a Prusa Mini.

Pobrania
471
Polubienia
98
Ocena
5
P
PrintablesSamuel Mikula

Chelsea FC display

This is little Chelsea fc display you can put under your TV while supporting Blues. :

Pobrania
457
Polubienia
23
Ocena
5
P
PrintablesRoland

DJI Osmo Pocket 3 - Tesla Center Display Mount

Place a rubber mat behinde the mount and under the hooks. Then the Display is secured from scratches and the mount is not moving. Take superglue to put the two models together.

Pobrania
423
Polubienia
73
Ocena
5
P
PrintablesA.C. Wright

Cali Cat Display Case

This is a display holder for the Cali Cat that can be joined together to form a matrix of cats for individual display or a grid for filament reference! For more info: You will need to print the "keys" with a brim. I've included two files…

Pobrania
406
Polubienia
133
Ocena
4,86
P
Printablessteve

Display clip for OLED terminal

I really liked @episco 's OLED terminal but didn't wand to glue the OLED into the frame so I came up with this little clip to hold it in place. To install it, just put the OLED display and the the clip in place and push the clip down. Due…

Pobrania
358
Polubienia
33
Ocena
5
P
PrintablesAsa

Motorized Rotating Display Stand

Make a motorized rotating display stage with your printer + off the shelf hardware. I printed this in ABS and tested it to about 190 lbs! Affiliate Amazon links for the parts I used: - 8 inch ball-bearing lazy Susan:…

Pobrania
339
Polubienia
96
Ocena
0
P
PrintablesJulian0815

Minifigures Display Stand LEGO compatible

Print “Lego_Stud_Diameter_Test” first, test it and choose the right diameter size for your display stand models. Every display stand model comes in three different stud diameters (4,9mm 5,0mm 5,1mm) and in two versions (stud compatible…

Pobrania
307
Polubienia
83
Ocena
5
P
Printablestobiwankenobi

Opening Tool for e.g. Displays, Notebooks/Laptops Carparts, etc

This is a simple little Opening Tool e.g. to: remove phonedisplays open laptops/notebooks/tablets,… open/remove car parts remove E-cigarette-tank-glasses/atomizers or other areas of application…

Pobrania
301
Polubienia
12
Ocena
5
P
PrintablesTmpx64

Hinged Book and Picture Display Stand (print in place) - Easy and quick - Functional - Print-in-place

Easy to print and great to display books, phones, tablets, pictures or other … If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…

Pobrania
290
Polubienia
79
Ocena
4
P
PrintablesCameron

Gyro the Dodo - Ultimaker Special and Display Stand

“Gyro the Dodo - Ultimaker Special” is an awesome test print originally developed by an artist named Virtox to show off the capabilities of Ultimaker printers. After building my MMU3 and ordering some BVOH for soluble supports, I was…

Pobrania
286
Polubienia
10
Ocena
5
P
Printablesjzmuda

TFT LCD Display Housing TZT 240x320 2.8" SP

The housing was designed for a 2.8" LCD display. In the device under construction, simply cut a 52 × 90 mm opening and attach the housing using double-sided tape or plastic adhesive. The inserts used are M2.5 × 4 × 3.5. I printed the…

Pobrania
275
Polubienia
17
Ocena
5
P
Printablessam krei

3-tier diecast (1:64 scale) car display

sturdy little 3-level diecast car display. Holds 6 cars total. also holds 15 lego minifigures with their stands perfectly can be used to display other things like spray bottles for your airbrush or mini utensils and screws etc…

Pobrania
273
Polubienia
62
Ocena
0
P
PrintablesHeidi Makes

Instax Camera Frame Display

This model was designed to be a table display for Instax Frames. It can be used together with my Instax Frame and Keychain model or with standalone Instax frames. Printing Advice This model requires a little bit of support on the camera…

Pobrania
259
Polubienia
50
Ocena
5
P
PrintablesSheepMe!

Creality Ender 3 Neo LCD Display Cover

Just a simple LCD Cover for Creality Ender 3 Neo

Pobrania
238
Polubienia
38
Ocena
5
P
Printablesreiji

Prusa MINI Enclosure - External Display Housing

This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side. Required hardware: -3x M3x8 screws -1x M3 nut -Reuse the 4x M3 screws from…

Pobrania
232
Polubienia
109
Ocena
5
P
PrintablesChris Crewdson

Raspberry Pi deep 7 Inch Touchscreen display case

Re-modelled and extended to cover the battery hat I use.

Pobrania
230
Polubienia
19
Ocena
0
P
Printableslvisintini

Gameboy Advance maintenance/display stand

This stand comes in handy to repair or mod Gameboy Advance handheld consoles. Repairs usually require taking apart the whole system, which can be challenging to put back together. When placing the device face down on a flat surface, the…

Pobrania
230
Polubienia
55
Ocena
5
P
PrintablesPeter Farell

Godzilla Displacement Example

A side-by-side comparison of the low poly version of a model that you can download from Models-Resource and the resulting model after Displacement Magic in Blender and some basic sculpting. Video Coming Soon. Very similar to. FYI you can…

Pobrania
222
Polubienia
38
Ocena
0
P
Printables3D Attic

Apollo 11 Luna Lander MoonWatch Display

This is a remix of https://www.thingiverse.com/thing:3592040 changing the drone LEM into a watch display for your Omega Speedmaster MoonWatch. I increased the scale and added a LEM cup to hold the watch in place. Omega has created a LEM…

Pobrania
206
Polubienia
61
Ocena
3
P
PrintablesKimframes

Handheld emulation console display stand

Stand for displaying your handheld emulation consoles

Pobrania
189
Polubienia
23
Ocena
5
P
PrintablesNicuradse

Filament Swatch for Spinning Filament Display

Designed swatches for Spinning Filament Swatch Display - Lifts Swatches from Brad @ FTBT 3D with text for filament type. Following swatches are available. PLA PLA+ PETG ASA PVG FLEX Printing Settings: 0.2mm layer height turn on ironing…

Pobrania
180
Polubienia
23
Ocena
4,33
P
PrintablesLudo B

Staander voor oorringen te presenteren. Display stand for earrings.

Ik druk ze af in verschillende kleuren, voor wat het best uitkomt bij de oorringen. Je kan er ook stekers in steken niet allen hangers. I print them in different colors, for what works best with the earrings. You can also put plugs in it,…

Pobrania
156
Polubienia
31
Ocena
5
P
PrintablesAureusKhan

PSA Card Slab Display Stand

This is just a simple stand that I created because I couldn't find one with all the features I was looking for. Those features being: a cutout in the front wall to show as much of the card as possible, a support on the back to help…

Pobrania
151
Polubienia
13
Ocena
0
P
PrintablesWisersDulux

1:18 car display stand

1/18 angled car display. suitable to get a bit more height and a nice angle to show off one of your models.

Pobrania
143
Polubienia
19
Ocena
5
P
PrintablesJhannes

MK4 Display Adapter for the Ikea LACK Enclosure

You need the adapter to mount the MK4 Display in front of the Ikea LACK enclosure

Pobrania
138
Polubienia
39
Ocena
5
P
PrintablesFloern

Non-protruding Display Mount for Prusa XL

Left and right LCD screen support to move the screen on top of the base frame, such that it does not stick out at the front. These brackets replace the original brackets that connect the screen to the bottom frame of the printer. The…

Pobrania
134
Polubienia
42
Ocena
5
P
Printablesarcanelayers

Mug Holder / Stand / Shelf for displaying Starbucks or other mugs

This mug stand is designed to allow two rows of mugs to be displayed without worrying that the mug could fall off. It holds the mug in by using a lip that holds the bottom edge so that its less likely it could be knocked off (by a cat for…

Pobrania
132
Polubienia
48
Ocena
5
P
Printablesgskollnau

Bonsai display table (09) square 150x150x37mm

Bonsai display table 09 square 150x150x37mm, support is necessary. Feel free to scale up or down until you like the result and it suits your tree.

Pobrania
131
Polubienia
29
Ocena
0
P
PrintablesBruno Serge

Lego Star Wars X-Wing Starfighter 9493 Display Stand

Display stand for the superb Lego X-Wing Starfighter 9493 https://amzn.to/40jhuvl . Displays model in lateral 10 degree tilt (customizable, left or right) Prints as is without supports No tools required Base size: 13 x 13 cm

Pobrania
128
Polubienia
29
Ocena
0
P
Printableskjrps

Cover for gap between display and frame (MK4) (Abdeckung für den Spalt hinter dem Display)

After I have downloaded and printed the nice cable cover from John @John_Smith (Thanks a lot). I saw the terrible cable salad behind the display. Immediately I made a Cover for this. Printed with PLA galaxy black, I love it.

Pobrania
123
Polubienia
16
Ocena
5
P
PrintablesUloPe

Waveshare 7.9" touch display mount for Voron 0.2

This is a mount to attach the Waveshare 7.9" capacitive touch display to the front of a Voron 0.2 (it may also work for the 0.1 or 0 but since I don't have those I can't confirm that). The mount points are designed so that they don't…

Pobrania
120
Polubienia
20
Ocena
0
P
PrintablesKrennW

Code for Heater with AutoOff, AutoHum, Second Sensor, Fan-Control, LED-Control, Color Labeld Display. Bracket X with place for second and third Mosfet

The files are made for a MMU3 (here with MK4) Whereas the Chars (I|O, + and -) are changeable Also the used Extruder, here Main (Display 1) = 3, I|O, + and - = 1 Bracket X for place for two additional mosfet (fan and Led strip) There is…

Pobrania
119
Polubienia
25
Ocena
5
P
PrintablesFilgy

Beer Nukatap tap handle with Waveshare 2.7" e-ink display

Inspired by: https://www.printables.com/model/121432-e-paper-display-tap-handle https://www.printables.com/model/268334-eink-tap-handle

Pobrania
104
Polubienia
15
Ocena
5
P
Printablesmysak85

Prusa MK4/MK4S/Core One display cover

Ochrana na displej k tiskárně MK4 Tisknuto s tryskou 0.4, výška vrtstvy 0.10mm a změnou barvy v průběhu tisku Tisknuto z PLA, výplň 15% Screen protector for the MK4 printer Printed with nozzle 0.4, hole height 0.10mm and color change…

Pobrania
102
Polubienia
9
Ocena
5
P
PrintablesThomas Fuchs

Puck display stand

I liked the basic design from StanDed's puck stand (@StanDed_2446239), so I created mine in a similar fashion. The print is very easy (no supports, etc.).

Pobrania
101
Polubienia
7
Ocena
0
P
Printablesplu8

Toploader Cardholder / Carddisplay

Cardholder for toploader or multiple sizes of tradingcards, slightly angled, for diffrent layer heights,no massiv infill

Pobrania
99
Polubienia
16
Ocena
5
P
PrintablestheOstrich330

Hot Wheels Basic Display (CUSTOMIZABLE NOW!) ('91 Mazda MX-5 Miata)

This was the car that initiated my hotwheels collection. I thought it deserved a basic display in order for it to stand out from the rest of my collection. I tried to keep it basic so it wouldn't take the focus off the car. ---UPDATE--- I…

Pobrania
95
Polubienia
37
Ocena
0
P
PrintablesPaul Cobbaut

Scroll display for historical Smurfs

Scroll stand for Smurf figurines This is a simple stand for six historical smurf figurines that resembles an ancient scroll or parchment. Woodfill PLA I printed this using woodfill PLA from Colorfabb. Print settings I used a 0.60 nozzle…

Pobrania
93
Polubienia
26
Ocena
0

Holiday tree display with ornaments & toppers

Update: Ornament expansion pack is out - https://www.printables.com/model/324758-ornament-expansion-pack-for-holiday-tree-linked Happy Holidays! I created this tree decoration to be completely customizable . Some key features: 80 pegs…

Pobrania
92
Polubienia
34
Ocena
0
P
Printableswilliamdecker88

Disc Golf Mini Marker Display

Printed on Prusa Mini+. Turned out best when aligned “longways” with the movement of the print bed. I used organic supports (build plate only) on the overhangs of the front of the basket.

Pobrania
87
Polubienia
11
Ocena
5
P
PrintablesBubsBuilds

Displacement Sensor

Analog displacement sensor, measure under 10 microns for under $10! Measurement range of between 0.5mm and 1.0mm (depending on how careful ya are during the build) and a repeatability of around +/- 5 microns. I made it for an application…

Pobrania
84
Polubienia
19
Ocena
0
P
PrintablesFra Paschal

Stained Glass Holder - Leather Edge Dyeing & Drying Rack - Expandable Display

Helpful Tool to Store Stained Glass or for Light Edge Dying or Drying Leather Edges after Dying, Painting, Gluing or Prepping Work Use with specially designed Holder for Leather Edge Dyeing & Drying Rack - Expandable Display 14 Slots from…

Pobrania
79
Polubienia
25
Ocena
0
P
PrintablesHell

Wall mounting adapter for "Raspberry Pi 7 Inch Touchscreen display case" including Raspberry Pi 2 to 4B

I wanted to mount my Raspberry Pi 4B including the original Raspberry 7 inch display in our garage on the wall. I searched for a specific casing and found the design “Raspberry Pi 7 Inch Touchscreen display case” by luc_e (…

Pobrania
79
Polubienia
14
Ocena
0

Human foot with Lisfranc joint displacement

Human foot with Lisfranc joint displacement. Type Lateral displacement of the middle and lateral column https://surgeryreference.aofoundation.org/orthopedic-trauma/adult-trauma/metatarsals/lisfranc-injury The model is created by…

Pobrania
77
Polubienia
15
Ocena
0
P
PrintablesYveske

Raspberry Pi 4 Sleeve Case With Display

Sleeve for Pi4 with Joy-it JT3.5TR Touchscreenmodule 8.9 cm (3.5 inch) 480 x 320 Pixel Version with and without mounting rings 29/07/2024: Added the correct 3mf

Pobrania
74
Polubienia
11
Ocena
0

Miniature Sword with Display Stand

In a recent vacation I purchased a miniature sword replica in Toledo, Spain. As said in the description it was a replica of the “Tizona”. The sword came with the following description: TIZONA DEL CID This sword belonged to de castilian…

Pobrania
70
Polubienia
3
Ocena
5
P
PrintablesAlpino76

Ender 3 display cover

Printed on an Ender 3 with Cura 5.6.0 slicer.

Pobrania
70
Polubienia
4
Ocena
0
P
Printablesgskollnau

Bonsai display table (08) round 75x75x59mm

Bonsai display table (No. 08) round 75x75x59mm, best for mame bonsai. Feel free to scale up or down until you like the result and it suits your tree. A little support is necessary, even if the pot and feet are printed separately. However,…

Pobrania
69
Polubienia
13
Ocena
0
P
Printablesm_castle

Ancient Coin Display Stand - Ionic Column

I spent a lot of time looking for the perfect display stand for my favorite coins in my collection. In the end, I decided to design my own. I went with a design inspired by the style of Ionic columns, which gives the stand a classic and…

Pobrania
67
Polubienia
12
Ocena
0
P
PrintablesPulsenote78

Wand Display Stand – 3D Model for Horizontally Showcasing 4 Presentation Wands

This model is a horizontal display stand designed to hold four presentation wands (e.g., Quantelix, Catalyx, Virelia, Axiona). Each wand rests gently in a U-shaped groove designed to fit handles with a diameter of 28–29 mm, preventing…

Pobrania
63
Polubienia
5
Ocena
0
P
PrintablesPuppyGirlBelly

Thumb Tack Trading Card Display

A thumbtack mounted shelf and two frames for holding up Magic the Gathering cards, should work with other sized trading cards; but be sure to compare your card's sizes to the standard Magic the Gathering card size. Also works well for…

Pobrania
61
Polubienia
24
Ocena
0
P
PrintablesCJ

64x64 Matrix Display Raster

The idea is to separate each pixel into it's own "box" this in combination with a diffuser sheet or transparent paper, gives a nice “boxed” effect for each of the 4096 led's. Beware you are not going to print the object, you are going to…

Pobrania
55
Polubienia
4
Ocena
0
P
Printablesdhunink

InMoov Robot - Raspberry Pi Touch Display 2 mount

Building my InMoov robot, I wanted to use a Raspberry Pi Touch Display with a Raspberry Pi 5 connected to it, but couldn't find a suitable bracket. So I combined two existing things 😀 Alle credits to the original authors!

Pobrania
53
Polubienia
11
Ocena
0
P
PrintablesStrankler

Hygromter/Temperature/Voltage Display Case

When I finally assembled my Prusa i3 Mk3, I wanted to design something useful, to test the performance of the printer. Because I already bought some Hygrometers for my filaments, I decided to design a simple case for them. So this is…

Pobrania
50
Polubienia
5
Ocena
5
P
PrintablesSveinar

7-segment 3D-printed display for 3mm leds in Openscad

This is third iteration of these 7-segments. I could make a 5mm-LED-version one day. We'll see. https://github.com/Automationsrommet/Arduino-shield-2-7segment-with-pot

Pobrania
50
Polubienia
10
Ocena
0
P
PrintablesTheBoatbuilder

Scalextric Display Track

I have some Scalextric models on a display shelf. I needed a display base that looks like tarmac. I printed this on a textured sheet.

Pobrania
43
Polubienia
3
Ocena
0
P
PrintablesDorian Todd

Pinewood Derby Car Wall Display Mount

Transform your collection of Pinewood Derby cars into a stunning wall-mounted display with this miniature display mount. Showcase your most prized cars and relive the memories of your victories every time you look at them. With its sleek…

Pobrania
42
Polubienia
8
Ocena
0
P
Printableswenjuk

Raspberry Pi Touch Display 2 Stand 10.1 inches

Raspberry Touch Display 2 10,1" Ständer für die Darstellung im Querformat, z.B. als Bilderrahmen, 2nd-Screen. Gegenüber den Bildern sind die Schraubenköpfe in der Druckdatei und in den Modelldateien versenkt. Raspberry Touch Display 2…

Pobrania
37
Polubienia
0
Ocena
0
P
Printableslvisintini

Gameboy DMG maintenance/display stand

This stand comes in handy to repair or mod Gameboy DMG handheld consoles. Repairs usually require taking apart the whole system, which can be challenging to put back together. When placing the device face down on a flat surface, the…

Pobrania
37
Polubienia
4
Ocena
0
P
PrintablesTonyPTX

ESP32 Max v1.0 Quad Thermocouple Housing w/Display

This is a basic box to mount an ESP32 Max v1.0 Development board and four single MAX6675 modules (spi bus) that are compatible with K-Type thermocouples and a local display (i2c bus). The intent of this project was to be able to remotely…

Pobrania
35
Polubienia
6
Ocena
5
P
Printablesm_castle

Ancient Coin Display Stand - Corinthian Column

I spent a lot of time looking for the perfect display stand for my favorite coins in my collection. In the end, I decided to design my own. While my last design was inspired by the elegance of Ionic columns, this stand draws inspiration…

Pobrania
31
Polubienia
11
Ocena
0
P
PrintablesSimon
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
22
Polubienia
4
Ocena
0
P
PrintablesDarkcoucou

CF5135B-Z/CF5135C-Z Tachometer Display Box W/ Battery

These are parts used to make a powered Tachometer display box for a small Lathe or Milling machine and mount the connected sensor to a OPTImill BF16 Vario Milling machine via either an Replacement Cap cover part or a bracket. Two…

Pobrania
20
Polubienia
1
Ocena
0
P
Printablescmpxchg

classroom concentration warning / CO2 sensor / display with USB-C and wifi

Simple CO2 sensor with bright color display to help ventilate classrooms. Can be used to improve concentration performance of its inhabitants, and to help reduce risk of distribution of airborne life-threatening phenomena. The concept is…

Pobrania
20
Polubienia
14
Ocena
0
P
PrintablesJAnthony

Display riser on aluminum extrusion for INFI-20 Belt Printer

I developed a riser that connects to the aluminum extrusions that will allow for the housing of the display and control board to properly cool. The design from Sainsmart does not allow for proper cooling as the fan sits on top of the…

Pobrania
18
Polubienia
0
Ocena
0
P
Printableseof

iPhone holder on Apple Studio Display / iPhone Halter für Apple Studio Display

Built in camera of display is not covered. I used the slicer to make an additional slot for buttons on the left side of the phone. See images.

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesLaurenz

Stackable Prusa LCD and Waveshare 5" display cover

Two separate covers for the origin Prusa MK3+ LCD and the Waveshare 5" LCD. Both covers can by stacked for easy storage. It can be printed easily and without support.

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesAureusKhan

PlayStation Vita Game Cartridge Display Stand

This is just a simple stand that I created because I couldn't find one with all the features I was looking for. Those features being: a cutout in the front wall to show as much of the cartridge as possible, a support on the back to help…

Pobrania
15
Polubienia
6
Ocena
0
P
PrintablesDr.Daniel

Remix of the Lid from "AHOY Enclosure with display"

I bought a DTU electronic set with a display which was not fitting in the enclsure. Therefore I adapted the lid.

Pobrania
14
Polubienia
1
Ocena
0
P
Printablesomiedude

Screwin-A-Round Showin' Off (display stand)

Display stand for the faceplates from the Screwin-A-Round Extruder Visualizer designs. Now, when you're not using one of your faceplates you can still show it off :) Get your faceplates from the Screwin-A-Round Extruder Visualizer :…

Pobrania
13
Polubienia
2
Ocena
0
P
Printablespper44

SD Card & USB Holder for HP EliteDisplay E232

I never know where to store my usb keys or my sd cards. So I modeled a small support that I insert into the foot of my HP screen! I added the Step / f3d files if you want to adapt this model to another location / screen. Print…

Pobrania
11
Polubienia
3
Ocena
0
P
PrintablesJérémy Reeder

Stilts for Agon LCD Display

You'll need to print four of these bad boys.

Pobrania
9
Polubienia
0
Ocena
0
P

6502 Model/Display Badge

Overview Step back into the golden age of the 8-bit revolution. This is an idealized 3D reconstruction of the MOS Technology 6502 , the processor that brought computing to the masses. Whether you are a retro-computing enthusiast, a…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesZbyněk Král

Raspberry Pi Display Holder

The model for the Raspberry Pi Touch Display 2 impressed me so much that I decided not only to print it but also to modify it, extending its utility with an adapter designed to secure it to a standard monitor stand. Print instructions:…

Pobrania
4
Polubienia
1
Ocena
0
P
Printablessoozafone

Dummy 13 - simple display stand

This is a simple display stand for Dummy 13 and other 13 Series figures. The stand consists of a base and two arm segments. You can then choose an adapter for your model from the included files. For best results, use ABS or PETG filament.…

Pobrania
42 376
Polubienia
4796
Ocena
4,83
P
PrintablesRyan Millar

Honeycomb Display Shelf (No Supports Required)

Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…

Pobrania
33 771
Polubienia
17 587
Ocena
4,94
P

Adjustable Monitor shelf - Fits any display: curved back, thin bezel, laptop, or TV.

Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…

Pobrania
16 046
Polubienia
4013
Ocena
4,88
P
PrintablesDET-Man

BTT HDMI 5 Display Voron Mount (Works with Clicky Clacky Door)

This is a remix of the BTT HDMI display mount Voron with all modified parts being compatible with the originals design. So you can Use the remixed mount bracket with the original asymmetrical display frame Use the original mount bracket…

Pobrania
13 504
Polubienia
275
Ocena
4,78
P
PrintablesDavid Kingsman

Split-Flap Display

This split-flap display sets itself apart by being almost completely 3D-printed. The flaps are printed by changing the color mid-print and mid-layer. The case is also completely 3D-printed. Video of the display in action (with sound):…

Pobrania
13 458
Polubienia
5772
Ocena
4,78
P
PrintablesEDnation

BTT HDMI5 V1.2 display mount Voron

**This design is for HDMI5 V1.2** If you're looking for HDMI5 V1.1 mount, use this one: https://www.printables.com/model/787236-btt-hdmi5-v11-display-mount-voron Notes Mount BTT HDMI5 Version 1.2 on Voron V2.4 and Trident My display came…

Pobrania
12 258
Polubienia
228
Ocena
4,97
P
Printablessoozafone

Lucky 13 display base 2.0

A new and redesigned display base for Lucky 13 and friends. Featuring a locking telescoping arm that won't droop over time. As always I recommend printing in PETG or ASA for stronger and longer lasting joints. Especially for the “upper…

Pobrania
12 220
Polubienia
1744
Ocena
4,91
P

Modular Display Stand for LEGO Star Wars / DC / City [Main Project]

Before you go further! This project is for personal use only. Any commercial use is forbidden Follow me on Instagram @StawiamKlocki.pl to keep up with latest designs Go to Google Sheets to get files list for your LEGO models Watch General…

Pobrania
12 065
Polubienia
1814
Ocena
4,91
P
PrintablesRetron Print

F-117 Display Model

Legendary Lockheed F-117 Nighthawk. It's a super secret plane designed in the 80s. The first fighter to use stealth technology. Its legendary shape excites every aviation enthusiast. It was simplified to a bare minimum shape that…

Pobrania
10 180
Polubienia
3348
Ocena
4,81
P
PrintablesPrinty Ponky

Banana Katana Remix with Display Stand

This remix of the original Banana Katana introduces significant improvements for enhanced functionality and stability. The original Banana Katana model features a banana that unfolds into a long sword. In this remix, the model has been…

Pobrania
8814
Polubienia
1924
Ocena
4,53
P
PrintablesNickR1983

Rotating Keychain Display

UPDATE: I added a new profile with a top piece with a label on it where you can put your price or name on it. You can edit it in Bambu studio. Just put some text to it. I made this rotating keychain display. It's very sturdy and requiers…

Pobrania
6401
Polubienia
1593
Ocena
4,71
P
Printables3DPrintBurgas

3D Benchy Dry Dock Display Stand

Added a free-stand base and side frames to four of those modules. Makes a nice display for available filaments and colors. The whole construction came out very stable, but to stay on the safe side I added a bunch of M6 nuts in the base to…

Pobrania
6019
Polubienia
2468
Ocena
4,87
P
PrintablesLevi Sitts

Modular Hex Display

This modular display system was inspired by the Minifigure Display by AJsRaceway on Thingiverse. I redesigned it for 1:64 scale cars, and added a few specialty modules for large vehicles and mounting hardware. UPDATE: Version 2 is now…

Pobrania
5275
Polubienia
1465
Ocena
4,73
P
PrintablesChristian

Floating Honeycomb Display Shelves

Remix to remove the top half of the back honeycomb to give a 'floating' look and to double the stability while hiding the nails better Print one frame piece and two side grills (Preferably in an accent color) Don't forget to resize the…

Pobrania
5207
Polubienia
1867
Ocena
4,92