Liczymy pasujące modele…
E-100 Tank Model 1:72 This model represents the German E-100 super-heavy tank with several build options: Tracks & Skirts No-skirts version : tracks are attached using 4 connectors . Full-skirts version : tracks already have built-in…
This is a model of the tank G98_Waffentrager_E100. maybe you ned to scale it up Print Settings Printer Brand: RepRap Printer: Prusa i3 Supports: Yes Resolution: 0.1 Infill: 30% Category: Vehicles
Hifiman HE Stand for Arya, HE1000, and Jade series headphones. This model works best when the larger Dekoni pads are installed, as the original pads are slightly thinner.
Geetech PLA Matte Grau BambuLab X1C Mit Supports
I love my little blower for getting rid of sawdust from the garage, but the inlet is on the left side and is always getting stuck on my shirt. I'm sure that I am losing a little efficiency with this, but it still works for my needs. Print…
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
Easy print E-100 Scale 1/100 (Required some glue and sanding) The Panzerkampfwagen E-100 (Gerät 383) (TG-01) was a German super-heavy tank design developed towards the end of World War II . It was the largest of the Entwicklung series of…
See the youtube video for details. The extruder requires three or six MF85ZZ flanged bearings and three or six countersunk M3 screws. The flanges on the bearings need to be ground to 9.1mm diameter edges. Alternatively, pick your own…
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
NB This is a WIP Background: Modern 3D printers are printing FAST nowdays. But you don't have to spend a fortune on a Bamboo Labs top of the line printer. Believe it or not, if you have a printer with a 235x235 bed (like an Ender 3) you…
Custom PCB Klicky Mounts for the ‘The100 v1.1’ printer. The100 v1.1 printer PCB Klicky Probe Mount the100_pcb_klicky_connector_plate.stl Designed to replace stock Connector Plate.stl on the toolhead. Places the PCB klicky probe inline…
The stand provided with the Tuya Zigbee temperature and humidity sensor was wobbly and in an angle. I prefer a more sturdy and vertical stand. I spent some time in Fusion360 and came up with this stand. Posting a make and liking the model…
I designed a mount for the BTT Pad 7 to connect direct to the bottom Frame for THE100 printer from MatThePrintingNerd
Since the adhesive version of the back plate of the Tuya temperature / humidity sensor (zigbee model TS0201 / MIR-TE100-TY) did not seem optimal in many places, I designed a compatible spare part for the back plate and based on this a…
0.2mm 25% Infill PLA Rod Length 224,5-225mm
late e100 turret with 150 mm gun
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
I found upon first use that this blower is only really good for left handed use. When using right handed the inlet keeps getting plugged with my pants. This is a bit over kill to make sure your clothing will not obstruct the air flow but…
When building a the100 printer, I had issue finding an Ender 2 bed or similar, so when I found a very cheap Ender 3 one I decided to install it based on the mod by overgo. I had to make some changes: my the100 version has only two rods in…
Why: I picked up a Craftsman air compressor model 921.152101 for free - it ran but wouldn't build pressure past 40psi. Upon disassembly, I discovered blown pump gaskets. Why buy when you can make? So, I whipped these up in CAD (15…
[THIS IS A WORK IN PROGRESS.] COMPATIBLE WITH THE VERSION 1.1 OF THE 100 ONLY!!! I made this because the other plug box on printables interferes with the PSU if you use a PSU tray. It also wasn't covering the back of the socket that has…
Ideal for smaller jars or bottles, these compact versions offer the same convenience and ease of use. PETG or TPU are recommended for optimal performance. Note: PLA is not recommended for the OPENSESAME1000 due to slight splitting issues…
Adapter to mount an ADXL345 on top of the 100's toolhead. Uses existing holes atop the hotend shroud. Designed for this (very common) version of the ADXL345 ADXL345 Accelerometer: https://a.co/d/79bJakJ (The wires it comes with aren't…
I added the cable holder to be a part of the tray since I did not have a way to screw it into the power supply. I also shortened the cable holder box by 20mm so it would not block the Pico at all. I did this in tinkercad and am not great…
i designed an adapter plate to mount the The100 Toolhead to my Ender 3 V2 to be able to test the CHC Pro Hotend, but you could also mount different V6 style hotends its also i great possibility to have good (way too much) cooling on the…
Print it on its back and you only need supports for the bracket for two of the tree models. Printer settings are the settings as used in the entire The100 project (see git of the project) Use same heat inserts as the entire project attach…
In an effort to reduce weight I modified The100 gantry geometry by carving out excess material and replacing m5 bolts with 5x45mm pins. There are holes that can be used to remove pins if needed. Print Settings Designed to be printed with…
This is a work in progress I wanted to see if I could fit THE100 to fit an Ender3 bed. **still require testing** **part is not orientation optimization** and I didn't want to make the printer anymore bigger as in the picture, the color…
work in process project added double bearing version that uses 6 MF85ZZ bearings drill shaft jig to hold shaft from turning in lathe.
Print in this orientation, with supports and with 3 perimeters.
This is designed to mount inside The100 Tank edition frame, and has mounting for BTT Octopus, Raspberry Pi Zero, and power supply. Just use longer screws and nuts where possible to mount the tray to the inside of The100's frame. You may…
This is a very simple change that allows a string to be added so this tank can be a keychain or bag tag. It is also scaled down, a lot. I printed it with a 0.2mm nozzle and 0.08 mm resolution and it works, but it is very delicate, I…
My normal bowden connector kept slipping out of the hole on my HGX-Lite. Made a mount that holds the extruder (upside down) and uses a more securely held M10 bowden connector. The larger M10 style is needed, as the tube passing though and…
Compatible with Fujifilm DE100 and DE100-XD Photo Printers Can be printed on Bambu Labs printers (barely) with build volume of 256x256x256 or larger. If printed on a CREALITY K2 PLUS or PRUSA XL (350x350x350 or larger), the build volume…
I wanted to make sure my motors did not get too hot in my frame. Decided against doing forced air. After talking with some members on the Discord we figured we might be able to fit everything without re-designing the back frame. I printed…
I wanted to create a printable version of the included foam stand that Hifiman provides with their egg-shaped headphones. I traced the original foam and created a 3D model, added a little hanger for the headphone cable. Print settings:…
When finishing up my the100 build, I was not fond of how the Z homes itself using sensorless homing. I looked around and the only spare switch I had was a Kailh Choc V2 from a previous keyboard project. I used a blue key switch so I can…
I designed this thing to clamp a small personal heater on the upper part of my enclosure (lack). I normally let this heater warm up the chamber and than switch the active heating off as the printer produces enough heath to sustain the…
This holds an Anker PowerCore10000 power bank onto the collection of Elite Strap clones here for the Oculus Quest 2. I found other solutions for holding the power bank too hard to use. I didn't have any good rubber bands, and wasn't about…
I got one XLite100 with the first e-bike I bought (Nireeka Homie) and the light seems to work nicely. After getting another e-bike (Nireeka Prime), but this time without the backlight, I thought that it would be nice to swap the light…
Adjusted lower holders for 200mm rods
The reTerminal E1002 only comes with a landscape / horizontal stand. This is a portrait/vertical stand for it. 2 versions, 10deg and 20deg Needs a short M3 screw
MOOER PE100 has stupid design that only allows it to be on the floor, otherwise you cannot see control board. In this stand it can be on the table.
Remix of a remix of a remix of an openGrid Brother P-touch label maker. Needs opengrid-multiconnect-directional-snap x2 opengrid-multiconnect x2
After years of wearing a Casio watch I've developed an allergy to the stainless steel caseback (Nickel) so I made this cover. The frame fits on over the stock caseback and holds a piece of adhesive vinyl (car wrap) to cover the back of…
Needed a backet for the switch/plug that is common for most printers. This is a basic bracket that should hold a plug/switch. Mine is a Biqu 15A 250V off of amazon. I made it to go on the right side of the printer as I wanted it for easy…
Requires one wheel and two inserts to be printed and glued into the wheel. Superglue worked for PETG prints. Printed using 15% honeycomb infill with 3 perimeters at 0.2 mm layer height using 0.4 mm nozzle. Printed on Prusa XL. In theory…
I wanted a clean solution to fill in the hole left by removing the DC-In jack in my PSP Street after doing a USB-C mod, so I made a quick model that just screws in where the original port went. Should also fit PSP-2000 and 3000 models…
Enforcement part for "The100" v1.1 printer. I had trouble with the bed leveling being bad, even if I just leveled it just before I printed. After a lot of tries I finally realized, that the printer pressed apart the frame at the front as…
Found that my little extruder could not keep up with The100s speeds, I was getting skipped steps. Had a M4 Mobius kit, and figured I would give it a shot. I know the square nuts will not be as popular, but those are the bolts I had…
I have a TRENDnet TE100-S5P+ Ethernet Switch which has a broken housing, so I designed this minimal housing for it. I think this is way better than the original one as it has a regular shape which makes it easier to place. I'D RECOMMEND…
I built a The100 printer, but couldn't find a model or template to use for my serial number plate. The .3mf file has a text layer to be edited with your own serial number, the backing plate is sized to affix on the Top Front Left frame.…
Better than no slot bracket, this one does a reasonable job of filling the empty space, in my old 486 machine.
!Work in Progress! Adapter for the Busch & Müller Lumotec IQ-X E 150 Lux E-Bike light to fit onto the Odys Neo e100 e-scooter. v1 is simple and small but works perfectly. I'm working on v2 which will be more similar to the original light…
Since I'm currently finishing off the building of my The100 tank 3D printer and using this electronic tray, I've designed this custom-fit cover/lid for it. This design ensures your electronics are protected from dust and debris . The…
sliced to fit on mk4s bed
This is a custom accessory designed for the THE100 3D printer . It consists of two parts: A spacer A MicroProbe mount The design is optimized to securely hold a MicroProbe sensor in place. It includes two slot for inserting a melting nut…
When going large scale diy 3d printer, the corexy style is not great because of the extremely long belts. Thats why I found the Riff buil very interesting. But i want to go fast and have great cooling. The Riff has the x motor mounted on…
This mod consists of a PLA bayonet style adapter as well as two TPU 95A gaskets, and another TPU cover that replaces the original fabric. One gasket replaces the original filters, while the smaller one seals between the adapter and the…
My printing parameters were, 15% cross hatch, 3 walls, 4 bottom and top layers. For the orientation, print it with the lip facing upwards. PETG is the best for this, but PLA is usable too If you want to prevent the PSU from sliding out,…
Hey everyone, it's my first model ever, so don't be harsh on me. The housing requires some extra filing to fit a type-c connector. The shell of your PSP street should also be trimmed down a bit. Quick tutorial: •Print the housing; •Take…
Since I'm currently finishing off the building of my The100 tank 3D printer and using this electronic tray, I've designed this custom-fit cover/lid for it. This design ensures your electronics are protected from dust and debris . The…
The reTerminal E1002 only comes with a landscape / horizontal stand. This is a portrait/vertical stand for it. 2 versions, 10deg and 20deg Needs a short M3 screw
Easy print E-100 Scale 1/100 (Required some glue and sanding) The Panzerkampfwagen E-100 (Gerät 383) (TG-01) was a German super-heavy tank design developed towards the end of World War II . It was the largest of the Entwicklung series of…
The bearing grinder jig used to grind the bearings used in the VDE100 extruder. Remixed from Tom Brazier's tool to change the thread to fit my DREMEL 3000, though I believe most Dremels use the same thread (¾-12) so it likeley fits most…
