Liczymy pasujące modele…
A case for the Wemos D1 Mini ESP8266 PCB. It has holes on all 3 walls partially for ventilation but mostly for wire pass-throughs to make running wires in different directions easier. There are holes for the reset button on each side…
A sealable case for the NodeMCU ESP8266. Mounting screws hold in place while the lid snaps tightly on top and wont come off easily. This can be used standalone or as part of a larger project or design. This thing was made with Tinkercad.…
OpenScad case for esp8266 development board. Thanks to Sergio Vilches for the rounded corners!
Fusion 360 source file available! UPDATE 27.03.19: Remodeled designs from scratch in Fusion 360 and added slots to fit full size dupont connectors as follows: V2 - similar to the original but with duponts V2_Hollow - hollow bottom, more…
This case allows you to put the dupont wires inside the case rather than outside (in case you have a cat that likes to knock your stuff around). It provides a bit more security to keep things from being disconnected.
You will need neopixel stripes and a microcontroller. I used an esp8266 for wifi sincronization. I used 4 neopixel per segment to improve the color persistance. https://www.facebook.com/media/set/?vanity=Menyiques&set=a.10213457141085498…
just a stretched version fitting ESP8266 nodeMCU v3 from https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/samwiseg0/esp8266_nodemcu_din_mount by samwiseg0
It's made for the LOLIN D1 Mini v4.0.0. The case doesn't fit older versions of the D1 Mini with micro-USB or components on the backside. Video: https://youtube.com/shorts/DUVmJcQiBqA Buy: https://spacehuhn.store/products/deauther-d1-mini…
There are 3 parts to this. The top, bottom and an accent colour board (for some extra fun). The design doesn't serve too much of a practical purpose (the hexagons look cool) but, the pins are recessed into the case to prevent them from…
Node Robot Platform using ESP8266 for robotic development. This project is inspired by the SMARS robot but use ESP8266 as it heart for out of the box remote control. Hardware Needed hardware (all the link is for reference): 1x ESP8266…
This case has slight changes to it and is based off of Digital Juice 's. This update fits the LD2410 with or without dupont wiring and the USB C version of the D1 mini ESP8266. I included a text file of the .yaml file that is working for…
Key Features: Identification: The "ESP8266MOD" text is embossed on both the top lid and the side of the base for easy identification. Functionality: The top panel includes a rectangular cutout for a display (or pin access) and two…
Case for multible ESP3266 dot matrix projekts. There are many projekts online, just search the web for ESP8266 and MAX7219 or dotmatrix. The drawer in the lid fits to the WeMos D1 Mini ESP8266 module. Close the lid with two M2.5 bolts…
I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…
ESP8266 node MCU V3 Case from AZ-Delivery
This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…
If you want to support my work, just buy me a coffee: paypal.me/predypavlovic Case for ESP8266 MINI D1 dev board No screws required Ventilation openings Can be mounted without unplugging the circuit board Includes housing with and without…
This is my case for the Wemos Lolin D1 mini v4 ESP8266. Please note that only the Wemos D1 Mini v4 fits in this case. This is my first CAD construction ever so feel free to make improvement solutions. Special credits go to my neighbour LS…
Print the two parts of the case without support and snap them together.
A NeoPixel / WS2812b controlled LED Matrix with 16x16 Pixels Easy to print: Can be printed without support, Filament Type doesn't really matter. I printed mine with PETG, but PLA or something else should work fine as well! I printed the…
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
Enclosure for a NodeMCU ESP8266 development board. The model fits boards with measurements being roughtly 26X49mm. The model is designed so that 5 Wagu 221 connectors can be mounted for connecting the LED-strip through a hole en one end…
Small snap fit case for the D1 mini footprint of the ESP8266. Reset button still accessible The small gap next to the USB connector can be used for routing cables to connect to external sensors Prints without supports
I needed an option to mount the Wemos d1 mini module of my OctoPrint-Monitor to my enclose and made this simple mount/case. It holds the module tight (but not too tight to aviod damage of the module), so it can't slip out. To insert the…
This mount is designed to attach an ESP-01 microcontroller to a krom schröder gas meter. It fits into the recess of the gas meter in which magnetic pulses can be read with a reed switch. In my youtube-video ( https://youtu.be/i9hPf0uNzFE…
The small one is for the esp without the pins, and the tall one is for the esp with the pins.
1.3in OLED Screen case with ESP8266, used as stock ticker.
Gehäuse für ein ILI9341 TFT 320X240 Display Das Gehäusedeckel wird nur aufgesteckt. Das Display wird unter der Kappe mit 4Stück M3 X max.10mm Schrauben festgehalten. Das Gehäuse bietet genügend Platz um darin einen ECP32 oder D1-Mini etc.…
Rafts: No Supports: Yes Infill: 20%
UPDATE: Added a "Rugged" version with clips (pretty flimsy, take care) for an increased holding strength. A very slim case for the WeMos D1 Mini DISCLAIMER: I've designed this case to fit my WeMos board with very small tolerances. I hope…
I've tried to make a customizable socket to fit any module you are trying to Program such as the ESP8266 wifi module or a HC-05 bluetooth module. Prity much any module that is based on being a board to be surface mounted. The open SCAD…
This is a station box designed for the Wemos D1 Mini and the standard 0.96" 128x64 OLED display. Get creative with Arduino code or load some of the awesome Wemos applications out there. The Wemos D1 mini will slide in and is held in place…
This is simple and easy to assembly case for MAX7912 and ESP8266 informer. It looks minimalistic and nice. V2 update (26.02.2021): Added version with display grid. It looks much better. Front part of the case is universal for both…
For the Get creative with WAGO contest I thought it would be cool to have a case that houses a d1 mini esp8266 development board and Wago connectors to do the test setup instead of a breadboard. You need to print the following files:…
Human presence sensor housing, could not find any casing for the older ESP 8266, this is my first design so, feedback are welcomed Printed with a 0.2 resolution. Use 4 wall layers if to avoid infills on the lid. Screws needed: 2x 25mm M3…
I have been working on this project since November 2017 and have been enjoying it so much that it is time to share it. Features include: Accurate Clock refresh off Internet Time Servers Local Weather and conditions (refreshed every 10 -…
Case / Enclosure for an ESP8266 / NodeMCU / ESP12-F Key Features: Accessible USB Port Prints without supports space for 3-5 wires no screws required, just click it together I'm using it for WLED Projects.
This is a case for the NodeMCU V3 - ESP8266 (e.g. for AZ-Delivery ESP8266 NodeMCU Lolin V3 ) esp8266_case_box v5 : added two holes to mount box with screws on a plate (e.g. with 2xM2). I hope you like the model! → Makes and Comments are…
I used the base of netzlasts Shelly1 DIN Rail Clip and designed two clips, one for the normal Wemos D1 Mini and one for the ESP32 D1 Mini, which is a bit wider because of the additional I/Os. Category: DIY
This little enclosure will hold an ESP32 and DHT22 snugly, for wifi climate monitoring in a nice small package. I recommend the vented, direct soldered lid. Even with the vents, if you use this without deep sleep or lower power mode, THE…
Just another seven segment LED clock. Current version of SW working, but it isn't final version. What is working: time on dislpay synchronization from NTP server time in local time zone. This zone must be specified manually on source code…
Hi there ! This is a tally light model designed by my own, the goal was to give each camera operator an indication if he is on air, or in preview by the control room. This is a project I made for my video production association “La…
A case for a Wemos / MAKERSHOP.DE D1 Mini ESP8266 WLAN board. Additional features on the side to add your own additional covers. Size: 32mm x 41.2mm x 28mm. UPDATE: Added a a case_top for D1 without headers. Added TopCover as an example…
USB micro-use/typeC cable or 5V dupont wire power supply Hardware: ESP8266 D1 Mini | W:23.2mm X H:34.3mm HLK-LD2420 | 20mmX20mm Dupont 2.54 X 2pcs (Optional) I have a spare Xiaomi motion sensor base, connecting to the case with a M3*8…
The lid snaps in, just screws for mounting the electronics required
IKEA VINDRIKTNING ESP8266 Wemos D1 Clip to fix an ESP to get the dust values from the device via WLAN. PLA - no supports - 100% infill
This is an enclosure designed to fit closely to a Meanwell LRS-100-5 power supply, and to house a NodeMCU Base PCB. My objective was to have a neat, all-in-one enclosure for all I need to run the excellent WLED "Neopixel" addressable LED…
This is my remix of the Sensor Node Enclosure for ESP8266 by calvinboey on Thingiverse . I changed it in order to fit an ESP8266 and a BMP180, so I made it smaller and closed nearly all openings. Other sensors should also fit in the box,…
This is an enclosure case for the NodeMCU V3 development board and base. ESP8266 Development Board NodeMCU V3 can be found here: https://www.amazon.com/dp/B07DK2LRJJ/?coliid=I37O15QSY8H0VA&colid=1PKM0NV2CRFRC&psc=1&ref_=lv_ov_lig_dp_it
Case for an ESP8266 NodeMCU with micro-usb connector. Press-fits together. If it is too lose, apply a drop of glue.
I printed the enclosure by jperson(on thingiverse) thinking it would fit my ESP8266/NodeMCU board but it was apparently designed for a different, larger dev board. The holes for the pins fit perfectly though and I liked the form factor a…
I've designed this case for the NodeMCU V3.2 Arduino ESP8266 (Lolin/Wemos), with a bit of space for a sensor. Print Settings Rafts: Doesn't Matter Supports: No Category: Electronics
These cases are compatible with the following Feather boards: Adafruit Feather HUZZAH with ESP8266 WiFi: https://www.adafruit.com/product/2821 Adafruit HUZZAH32 – ESP32 Feather Board: https://www.adafruit.com/product/3405 Feather ESP8266…
An enclosure for the CAJOE RadiationD v1.1 geiger counter, with space for an ESP8266 for integration with home assistant through ESPHome. Works just fine without the ESP8266 as well. The lid has little notches to press-fit into place.…
I was excited by the design and solutions of shiuras hollow clocks . But all of them are running with only quartz accuracy and needs permanent correctures. So I used an ESP8266 NodeMCU to obtain the time from internet and added a…
Enclosure made for the mmWave presence sensor featured in Everything Smart Home video: Components include: Wemos D1 Mini mmWave sensor Remixed from models created by jevis on Thingiverse: https://www.thingiverse.com/thing:5353636 Printed…
Made a case for my ESP8285 ESP-01M IR Infrared Transmitter Module that I use as remote for my TV with Home Assistant I used ESPHome remote transmitter https://esphome.io/components/remote_transmitter.html with the IR remote codes from…
Design a simple enclosure for my ESP8266 + BME280 temperature, humidity and pressure sensor with micro USB space for pow
A fully 3D printed enclosure to create a progress circle and alert notifier using a WS2812B 16 LED ring and ESP8266 D1mini. Using WLED firmware enable WiFi control, accessible through the WLED app or your home automation software, such as…
This is a tiny box to hold a wide NodeMCU board. The box is tall enough that you can cram a few select parts underneath the board. There's a cutout for the (ugh) micro-USB port, and a hole to stick a 3mm LED out, or run some wires…
Like the summary says, a really simple (wall-mount) case for ESP8266 D1 mini and a 1.77 inch display. Depending on your printer, you might have to adjust the print size. Actually, I found the print to be quite tight with our Mk3s, so…
A 3D printable, GitHub infused, wifi enabled smart light powered by WLED and compatible with Home Assistant For full assembly and wiring instructions see https://github.com/martinwoodward/octolamp Revised Jun 26 2023: Added holes in black…
I was fiddling around with fully printable hinges and created this design for a project. There is a small gap of 0.2mm between the top and bottom parts. After printing you may need to carefully crack possible connections between both…
This is a remix of the case by Lorenz Nimmervoll. Thanks to him! My changes: snap fit case ventilation in cover fixation of the Power Jack simplyfing inside for less supports/material only one hole for cables
Designed this case for my NodeMCU 1.0 ESP-12F ESP8266 board. Ordered a bunch of those from AliExpress (e.g. https://www.aliexpress.com/item/1005001621705950.html ) and needed a case to fit them. Case provides access at the front side to…
The clock is based on WS22812b addressable LED strip and WEMOS-D1 mini (ESP-12F) board. In my case it is running the ESPHome software in combination with Home Assistant (see link below). Fusion 360 files are also available. To get result…
This is a case for two 4 x MAX7219 LED Matrix modules and a wemos d1 mini. You might break a few clips when inserting the LED modules, but there are enough, so it should not matter :) Print Settings Printer Brand: Creality Printer: Ender…
I ported the original arduino software by werner_rh for an Wemos D1 Mini because I wanted to monitor the drying sensor data with grafana. Therefor the sensor data is transmitted via mqtt an transered to influxdb using telegram. The…
Simple, well fitted enclosure for NodeMCU. Designed to fit Voron DIN rail clip. https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl To assembly you need 4xm3x16mm screws, 4xm3 nuts, 2xm2x10mm self…
Here you have my enclosure for WeMos D1 Mini ESP8266 board. All pins, USB port and reset button are easily accesible. Also pin labels are visible. Print it from PETG
A practical translucent case for the popular esp8266 microcontroller. USB power outlet is kept free. Print instructions Best print with PLA natural for shining through leds. Read more about useful 3D Print life hacks in my ebook:…
This is my attempt at creating an enclosed box for the ESP Development Board 8266 for my LED projects. I wanted to house the board its self along with wago connectors that I have all in one place looking neat and tidy. Wagos are great,…
This is a little desktop case for a ESP8266 NODE MCU V3 Board, and a 1.3" OLED Display. The backplate is supplied in three differnt versions: With hole for a DHT22 Temperature/Humidity Sensor With mounting points for Adafruit Breakout…
This is a case I made for the ESP8266 Deauther kit. It is inspired by the 1.3 inch Deauther Case . I used pretty much the same parts as in that build, though I did add an Adafruit Powerboost 1000c because I like the charging…
ESP8266 and DHT12 Case
Case project for an ElectroCookie Prototyping board and barrel plug for small electronics projects. The case halves are held together using four #4-40x1/2inch machine screws. The holes are just large enough for the screws to tap into the…
Holder for soldering pin headers to WeMos D1 Mini. The holder can be used with three different pin headers:
A simple enclosure for Esp8266 board with 0.96 zoll oled display. Nedeed parts: only a 3D FSM printer :) Print tips: no support needed print the lid with the top laying on the print bed the lid sits tight. Don't hesitate to use some force…
Pi-hole Monitor is a Wemos D1 Mini (ESP8266) with an I2C OLED display that is managed through a web interface and sits on your local network and will display statistics from your Pi-hole server. This is a station box designed for the…
These are the enclosures I designed for the DIY-Sensor for a Ferraris wheel power counter with an Amica NodeMCU ESP8266. You can read details on the setup and build and get the software at…
Gridfinity container for storing Wemos D1 mini boards.
Octoprint monitor weather station esp8266 D1 mini bme280 case What a mouthful. It shows the diversity for which this can be used for. Usecases: Octoprint monitor Weather station InfluxDB querry NTP clock Desktop widget Whats needed: Wemos…
Housing Display 3.2 inch TFT LCD Display Module ILI9341 320X240 (ESP32 /ESP8266)
This box can house a 1604 LCD (16x4 matrix) and a ESP8266 D1 module There are two holes that can be used to mount control buttons - i mounted them on a small piece of breadboard. The rear panel attaches using self tapping screws 1604 and…
This is a frontpanel for an ESP8266 with OLED display for integration in other projects. As it is it is U-S-E-L-E-S-S to print! I included the STEP file for further integration. AliExpress: LINK Category: Electronics
This is a simple and small case for the ESP8266 Lolin V3. It is completely screw-less and can be opened and closed via clicking together. (Sometimes the ESP's USB connector is to far away from the cover. Just break the the holder inside…
ESP8266 node MCU V3 Case
Update: Version 3.0.1 Fixed a bug that some movements of encoder during BLOCKED status were executed after switching back to normal mode. This is a remix from TheOrneryMaker's version of the CNC Marlin pendant.…
V2 - 04/11/21 I haven't printed this new version yet. Updates are: Added slit in the screw poles in the main body to add a nut, so it keeps the lid and body together much tighter without straining the plastic too much. Made walls slightly…
This is an enclosure to house the mmWave presence sensor that is used by the ESP8266 board. The mmWave sensor build was created following the Everything Smart Home Video channel. I recommend watching the video to understand how to build…
This housing is intended for the Wemos D1 mini microcontroller, in my case for short WLED strips (approx. 34 LEDs). https://kno.wled.ge/ The dimensions of the housing are 44 x 35 x 14 mm. The Wemos is simply plugged onto the printed pins,…
just added 15 mm of height
Simple and small NodeMCU(ESP8266) and DHT22 case. 4x bolt m3x12mm The DHT22 is very close to the ESP. Create a code to put the ESP in “Sleep”. Then it will work fine!
Also available with the Home Assistant logo cut (for extra swag).
You can grab a code and get more info about the project here https://github.com/Andryushik/shades_homekit Print it with a minimum 4 walls and supports. I used ABS+.
This is a case for the Wemos D1 Mini ESP8266 LED & Level Shifter Mini Shield , which makes it easy to control addressable RGB LEDs such as WS2811, WS2812 (Adafruit NeoPixels), SK6812, APA102 (Adafruit DotStars), and SK9822. The Wemos D1…
There are lots of project boxes out there. I needed a specific design that requires no screws. I hope you enjoy my little endeavor. It was a lot of fun to design and every time I design something I learn some new ideas on better design!…
Case for Esp8266 Wemos D1 mini USB C with reset button , very easy to print. Please note that when you buy this item it may arrive with slightly different dimensions because the cutting process is not very precise. I myself have had…
Jednoduchá krabička pro Node MCU ESP8266 s otvorem pro napájecí kabel a otvorem pro kabel od čidla
![Esp82660.96 zoll oled display enclosure [NO SCREWS NEEDED]](https://media.printables.com/media/prints/748218/images/5840809_6a6a55cc-bd7c-4971-b081-23436b732f0d_a2ee043d-b6e5-4dfc-a045-9590e5eb49c2/20240202_173054.jpg)
