Liczymy pasujące modele…
Printable accessory developed specifically to enable you move your Original Prusa Enclosure around easily. The handle is symmetrical, but you need to print 2 pieces. Check the guide on how to install the Transport handles . To mount both…
Wydruk około 5,05 €–6,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Low torques are necessary for many applications, such as carbon parts on mountain bikes or screw connections on electronic and robotic devices. But the usual torque wrenches works reliably only at 4 or 5 Newton meters and above. Fixed…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
New Design Released The new hex key handle has been enhanced with the following features for improved usability and style: Size Indications Added : Responding to popular requests, size indications in millimeters have been added to both…
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
Unfortunately, it is quite difficult for small children's hands to hold and lick delicious ice cream in summer. The melting ice cream drips, sticks and the sticks are very small and difficult to hold for long periods of time. With this…
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
Printable accessory developed specifically to improve the assembly experience for the Original Prusa Enclosure. To assemble this print you need an 2.5mm Allen key (part of the package) and the following printed parts: Allen key handle…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
4 handle sizes, perfect for your DIY projects
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Clamp handle for easy handling of needle files or scrapers for deburring and other post-processing. The principle of clamping the needle file is a collet mechanism. The handle has performed well. You can make any handle size by simply…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
iPhone mount for bike handlebar for phones with a case. Easy clip in, no obstruction of the screen, angle is adjustable. The phone is fully usable while in the mount. You will need additionally 4x M3.5 x 16 screws (ISO 7046) 4x M3.5 nuts…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the anchor handling tug, roughly modeled after an 160 ft anchor handling tug. This model was developed with play in mind. These tugs are used in open water to move ship or oil rig moorings as well as general towing. It has a blend…
Wydruk około 3,74 €–4,58 € nettoWstępna wycena jednego wariantu
Optimized remix of SD-3Ds broom handle bracket. 5 broom handle diameter sizes provided: 23mm, 24mm, 25mm, 28mm and 30mm Assemble using 4 large wood cutting screws for the base and 4 smaller screws of your liking for the handle. Made to…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Newer Version aviable: https://www.printables.com/de/model/444290-bike-stand-handle-bar-clamp-v2 Self adjusting bike handle clamp stand for handle bars, to do things on the fly on your flipped bike. Designed for 32mm handle bars, but…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
Simple interface to add the italian broom thread to wooden handle ø 22-23mm Semplice interfaccia per aggiungere la filettatura italiana per la scopa ad un manico da ø 22/23mm. Utile nel caso la filettatura del manico sia rovinata.…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Náhrada původní rozbité rukojeti k masážní pomůcce
Wydruk około 1,54 €–1,89 € nettoWstępna wycena jednego wariantu
About I have a one socket and a plug that is super hard to remove, so I created a handle to make it easier to remove the plug from the socket. Should be compatible with standard angled plugs used in computer electronics, home appliances…
Wydruk około 0,63 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PLEASE GIVE A LIKE IF YOU DOWNLOAD ;) With the TAB painting handle tabletop miniatures can be painted better. the handle is ergonomically adapted to the hand and so the hands do not cramp after long painting sessions. the miniature is…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Quick remix of Pejek's build palte holder for the core one. I changed all slots to 1.5mm to handle the OEM Prusa Build plates and added a small handle to pull the holder off. Uses 10x2mm magnets. I have uploaded the F3D file. DO NOT USE…
Wydruk około 6,22 €–7,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An handle for scalpel blade
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Handle for small thread taps. Useful whenever normal tap wrenches are too bulky. For taps with 3.5 mm shaft diameter and 2.7 mm square head. Tight fit when the handle comes off from the printer. But after little usage the fit is perfect.…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Design Starting from the two following models: https://www.printables.com/model/122734-systainer-150mm-sander-holder https://www.printables.com/model/135647-mirka-deros-wallmount-double I designed in Fusion 360 a new handler compatible…
Wydruk około 3,76 €–4,60 € nettoWstępna wycena jednego wariantu
This Model has originally been made, as a giveaway for a Birthday Party. It is easy to print without any supports needed. But I think the real Highlight is the “Soup” Lid. This can set a real eyecatcher, and hides all the real itegrents
Wydruk około 9,31 €–11,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Material wahlweise, z.B. PLA, PETG, ASA, etc. Layer: 0,15 - 0,2 Infill: 20% No Support, no Brim needed
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
Steam knob for Gaggia Classic pre-2015 model with 6 mm hole with flat side. It is a very tight fit, just push on hard! The flat side is internally reinforced.
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Comes in two Parts. The upper Bridgepart of a RC Scale Boat, around 1:45 Scale. Takes 8.5h one Part. The main house are 3 parts.
Wydruk około 2,90 €–3,54 € nettoWstępna wycena jednego wariantu
The mounts are designed for handlebars + handlebar tape with a diameter of 40mm and increased ground clearance. I printed whit PETG them with 4 perimeters, 10% honeycomb infill, without top and bottom layers.
Wydruk około 2,36 €–2,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info: decided to realize one more idea for furniture handles this time very simple design of round rods (they are printed standing) easily adjustable for any length between thread holes M4 threads on the bottom of each holder for…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Updated 07/09/2022 A bracket has been added for use on ikea skadis or similar murals. ********************** First I want to thank the user JAAANIK for his cool design "PARKSIDE X20V TEAM KSGER STM32 OLED T12 PORTABLE SOLDERING STATION"…
Wydruk około 3,53 €–4,32 € nettoWstępna wycena jednego wariantu
Check the model here: https://a360.co/3GXgjM9 BOM: 3 x M4 x 10 mm 3 x Hex nut M4
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
Handle for Kitchen Cabinet The holes in the handle have a diameter of 3 mm and a depth of 15 mm. The distance between the holes is 63 mm. --- Griff für Küchen-Oberschrank Die Löcher im Griff haben ein Durchmesser von 3 mm und eine Tiefe…
Wydruk około 0,76 €–0,92 € nettoWstępna wycena jednego wariantu
When I built my yeethammer my plunger tube would torque down on whichever side it was being pulled from, and as a result the plunger wouldn't always latch. I found myself spreading my hand and grabbing the nut side of the bolt as well and…
Wydruk około 4,50 €–5,50 € nettoWstępna wycena jednego wariantu
The original crank is made out of three parts and they have to be assembled with a screw. This is overly complicated for a simple organizer AND it is quite bulky. In my case it wouldn't fit in the tiny compartment of my car with the…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Revision 2 Viele nutzen bereits die Vorgängerversion . Ich selbst nutze Sie seit 2 Jahren kontinuierlich. In meiner aus ASA gedruckten Version konnte ich nun auf der Innenseite feinste Risse erkennen, die Stabilität scheint noch nicht…
Wydruk około 7,38 €–9,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu
Creator:guppyk https://www.thingiverse.com/thing:4619895
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
==== CZ ==== Běžná nábytková úchytka na skříň nebo šuplík ve skříni. Rozteč děr: 96 mm, Rozměry: 104 x 26 x 11 mm Rozteč děr: 128 mm, Rozměry: 136 x 26 x 11 mm Rozteč děr: 160 mm, Rozměry: 168 x 26 x 11 mm Díra na vrut: průměr 3mm Tisk:…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Air Handler System - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these have become the much…
Wydruk około 4,99 €–6,10 € nettoWstępna wycena jednego wariantu
Handle on my parents' refridgerator broke off and I found a great replacement for 3d printing by @HolesAreRound, but the handle itself was too long for the specific model my parents have - I had to shorten it so that the inner distance…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Add a [labeled] handle to your box allowing easy identification from the front! This handle should fit the default V2 Prusa Tools Box (InnerBoxWidth=180, ScrewLength=30) by @3DesignsCH . Install using 35mm screws (rather than the 30mm…
Wydruk około 7,64 €–9,34 € nettoWstępna wycena jednego wariantu
A metric hex key tool holder. Designed for mounting on the IKEA Skadis wall mount. Bit sizes include 2mm, 2.5mm, 3mm, 4mm, 5mm, and 6mm. Print settings Print with label side on print bed for best quality labels. This also allows the…
Wydruk około 6,04 €–7,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement handle and switch cover for the Mini R56. The handle started to degrade with time and fell apart so I created this replacement work perfectly. The replacement is glued in place of the old one, I used contact glue for flexible…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
Printed without support Designed to be mounted with wood screws from the back. CAD Model…
Wydruk około 8,80 €–10,76 € nettoWstępna wycena jednego wariantu
Magnetized tops for Redgrass painting handle with groves for 32, 28 and 25 mm bases. Requires 8x3mm magnets. Please be aware that the 28 mm bases are not held in grooves. There are also storage plates available to manage your minis during…
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
Handles mysterious sometimes go missing on these sorts of bins. I made a printable replacement for the 149X series clear Sterilite bins. It requires two 6 mm M3 screws per handle to secure the pegs and enable printing with optimal…
Wydruk około 3,58 €–4,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my take on LeFabShop's excellent handle that converts used Bonne Maman jam jars into awesome upcycled mugs. I made two small tweaks: There are 12 cutouts in the original design, whereas Bonne Maman jars have 10 sides. It always…
Wydruk około 3,50 €–4,27 € nettoWstępna wycena jednego wariantu
Mir fehlte einen Griff für meinen Honda GX270 Motor. Ich habe von meinem Ersatzmotor den griff nachmodelliert und für das Drucken angepasst. Gedruckt wurde aus ASA, liegend und mit 4 Randschichten. Support wird benötigt, kann allerdings…
Wydruk około 2,74 €–3,34 € nettoWstępna wycena jednego wariantu
Both knobs from handle of my car window have broken plastic that holds them in place and everytime i wanted to open or close window this knob detatch and stays in my hand after one turn. So to use the fact that i started learning some 3d…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
This is significantly larger than the flush finger pull I also offered in this competition. This is about 6" in diameter. The center hardware: ¼" x 1-¼" Hex Head Bolt with Fender-Washer, Lock-Washer, and two Nuts. The base has printed…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
A simple replacement for a showers broken door handle. The particular shower is "Krone - Die Dusche" but due to it's simple design the handle should fit on every glas door which uses a threaded rod that doesn't exceed 4mm in diameter and…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have seen these (in brass) on boats and some high-end luggage, such as the 1870's English officer's wood luggage he used when going off to India. The mounting holes are based on a #5 x ¾" Steel Phillips Flat Head Screw for Wood. They…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Dice Tower - The Air Handling System - A dark and dirty story... The megalopolises are full of stories. Just as the dead are as well. This is the dark tale of… The Air Handling System. Woe to them that seek deliverance in its dark…
Wydruk około 3,88 €–4,74 € nettoWstępna wycena jednego wariantu
Anderson SB50 T-Handle for battery cables but w/o team numbers
Wydruk około 2,84 €–3,48 € nettoWstępna wycena jednego wariantu
Don't have enough grip on your Benchmade GRIPtilian 551 or have to much denim in the pocket you keep your knife. Try these handles and get a grip.…
Wydruk około 5,17 €–6,32 € nettoWstępna wycena jednego wariantu
Náhrada zavírání mrazáčku v lednici značky Gorenje.
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
12/8/2023 - Added a version without the loop on top of the handle. I remixed this handle to fit my Anycubic Photon Mono X 6Ks, by adding a hanging loop. I also fixed the screw holes by adding more material under the screw heads. I also…
Wydruk około 4,68 €–5,72 € nettoWstępna wycena jednego wariantu
Remix of Spray Can Handle Remix by @kleenecks . Improvement of the shape of the groove in the body of the handle. The conical shape improves the insertion of the trigger into the grip body. Print instructions: Material: PLA Layer: 0,2 mm…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
Fillowing on from my original File Handle and the Hex Key long axis mount, here is a remix between the two, i.e. a similar profile to the bulb shape at the back of the hex key handle ( https://www.thingiverse.com/thing:3605461 ), applied…
Wydruk około 3,97 €–4,86 € nettoWstępna wycena jednego wariantu
CZ: Popis Zátka rychlopalu pro většinu našich motocyklů Jawa, ČZ, Pionýr, Babetta, Stadion, Jawetta. Nepasuje jenom do jednoho typu rychlopalu s menším průměrem trubky který se vyráběl jenom krátkodobě. Nastavení tisku Podpěry Použijte…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
I wanted a handle with a similar form factor as a condenser microphone, so I could use it with a traditional microphone arm, or to handle it myself while talking to the camera. So I went and remixed one of the models by @365Prints…
Wydruk około 2,03 €–2,49 € nettoWstępna wycena jednego wariantu
Basic drawer/wardrobe/dressing door handle with triangle model. Based on my previous wheel knob :) For fixing you can use M4 screws.
Wydruk około 3,16 €–3,86 € nettoWstępna wycena jednego wariantu
Window handle repair set
Wydruk około 0,76 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As soon as I received the CORE One, I noticed the paint on the handle was peeling. So I designed the assistive handles to cover the original handle and hide the blemishes. The following magnets are required to fix the assistive handles:…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nepalese Koozie with Griffen Handle Not AI. Rendered in Blender. Designed in Blender
Wydruk około 15,26 €–18,65 € nettoWstępna wycena jednego wariantu
Info: cabinet knob / drawer handle M4 thread on the bottom for attaching fully compatible lego duplo pillar (also from the bottom - so when not used as a handle, can be used for lego fun fully) Print instructions: nothing special
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Handle for keyless drill chuck 0,3-3mm hex 1/4" shaft To secure chuck in handle 2x M3x10mm socket head screws are needed. Holes for M3 screw should be tappered by M3 tap before screws are inserted. Material: PLA, PET-G etc. Layer high:…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapted from sensa.co emoji library. Build Instructions: Print file/s Glue on handle with hot glue or epoxy (Optional) Enjoy/receive an infinite amount of love from anyone who receives the gift of this stamp's imprint Get called a “cringe…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Use these simple adjustment rings to change the height of your Vanmoof S3s handlebar. I've modeled these closely resembling the original parts of the, now defunct/bankrupt, Vanmoof, in order to keep more bikes on the road. Printing: These…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
Google Pixel 6 mount for bike handlebar for phones with a case. Easy slide-in, no obstruction of the screen, angle is adjustable. The phone is fully usable while in the mount. The rubber case makes a good fit in the mount without the need…
Wydruk około 3,78 €–4,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Had to install a few Hik Vision cams… found out in short order… the L driver is rubbish… so we came up with a solution. cut the L short and epoxy it into the 3d printed handle. Much easier to utilize :D :D :D Enjoy!
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
After having this OEM replacement handle break after a year, I looked to see if I could 3d print one for less. Found the original model on Thingiverse and gave it a shot. The original had sharp edges that didn't feel great on your bare…
Wydruk około 2,29 €–2,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement backing to the “HANDLE LID FOR DECOR PLATE” part on an Asko D5624 dishwasher. It appears to be used on other D5xxx models as well. The original part number is 8084025 and is a single piece of ABS plastic. You can…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
This is a drop-in replacement of a Suncast Stow shed handle. I broke the original when closing the lid with the door slightly ajar and couldn't find a replacement. Printed with black PTEG and hopefully it lasts. Used the existing Suncast…
Wydruk około 7,90 €–9,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tottenham Hotspur cockerel emblem made into a keg tap handle. For use with a threaded insert (sold seperately) that matches your tap assembly. Print instructions Category: Hobby Summary Tottenham Hotspur cockerel emblem made into a keg…
Wydruk około 8,81 €–10,77 € nettoWstępna wycena jednego wariantu
РУЧКА ХОЛОДИЛЬНИКА. РАССТОЯНИЕ МЕЖДУ ОТВЕРСТИЯМИ 238ММ
Wydruk około 6,52 €–7,97 € nettoWstępna wycena jednego wariantu
Idee: In unserer Dummy-Trainingsgruppe werden an einem normalen Trainingstag etwa 40 Dummys von 8 Besitzern verwendet. Am Ende werden die dann untereinander wieder getauscht. Das dauert sehr lange, daher wurde eine farbliche…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
This file is a handle as you can see, part of an open frame PC project. It is very resistant, to print in Pla, it has two 5 mm holes to fix. It measures 20mm. wide by 45 high and 173 long approx. I modeled it reticulated to make the…
Wydruk około 3,03 €–3,70 € nettoWstępna wycena jednego wariantu
There are still thousands of people that need to commute with use of public means of transportation. As we all know it brings a lot of risk of infection. This handle can be used to keep balance without touching handrails in the bus, tram…
Wydruk około 4,31 €–5,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a pair of lifting handles for the top section of a LACK Enclosure. The gcode prints in PETG. No Supports are required. The Print is orientated to give maximum strength in the lifting direction and has added perimeters to enhance…
Wydruk około 4,34 €–5,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My dad asked me to buy a small screwdriver that could take a standard 6.3mm hexagonal bit, so instead i made one with his request , large base but low height . I'm sharing it since a lot of people where he works wanted one too , hope you…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
print parts with 3 perimeter, 30%grid & 0,25 layer height or use 3mf what u need (two handles): printed parts: 2xHANDLE (MorL)/4xHANDLE_MOUNT/ 16xSCREW_v2 4x screw M4x12mm or longer 16x screw M3x12 or longer, max: 20mm 4x M4x6mm heat…
Wydruk około 6,18 €–7,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The handles on my old Arrow steel garden shed split and came off the shed. I designed these replacement handles based on the originals. I added some reinforcement. Optimal print orientation is vertical, but requires brim and recommend…
Wydruk około 4,95 €–6,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My goal was to create a stable and ergonomic handle, which can be printed with less support as possible. The handle was created with FreeCAD. The handle part of the model was cut in half with the Prusa Slicer, the cut I tried with FreeCAD…
Wydruk około 3,72 €–4,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Final version done in black Materio3D PETG. You can use a set screw, dowel pin or a nail (you can cut the end) for the axis. You need 2 anchors to fix the handle.
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The top cover for the INDX is well designed and works perfectly. However, the smooth, sloped sides provide little to hold onto when opening the top. This handle solves the problem and attaches using the same 2 screw holes used for…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used this handle to build a individually designed saw from this replacement blade: https://www.dictum.com/en/replacement-parts-accessories-garden-tools-bdk/replacement-blade-for-super-speed-pruning-saw-712174 You need: printed Handle 2…
Wydruk około 2,26 €–2,77 € nettoWstępna wycena jednego wariantu
Store eight minis during painting based on my magnetic tops for the Redgrass painting handle . There is also a rack to combine 3 of the bases for easy transport. Glue 5x2 mm magnets at the top of every stem to harness the power of magnets…
Wydruk około 1,40 €–1,72 € nettoWstępna wycena jednego wariantu
My original rubber crank (handle part) holder for Porlex Mini broke and therefore I have often trouble to find the crank (handle part). So I designed this solid holder from easy to print material, PETG in my case, as a replacement. Print…
Wydruk około 0,54 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ideal fürs Halloween Kürbisschnitzen mit den Kids.
Wydruk około 1,99 €–2,43 € nettoWstępna wycena jednego wariantu
I got myself a new Nalgene water bottle a little while ago, and decided I wanted to try making a handle for it. This is the result! It holds the bottle securely but not so tightly that it scratches the bottle. It was a fun model to draw…
Wydruk około 7,62 €–9,32 € nettoWstępna wycena jednego wariantu
Klika pro nové dveře - hranol 8mm, použití v novostavbě pri vyberu designu dverniho kovani.... Proti zabouchnuti dveri v koupelne nebo WC. Door handle for new houses. Toilet, bathroom….
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small handle for specific furniture doors - Petite poignée pour porte de placard
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
Replacement part for the coffee machine dispenser height adjustment handle in De' Longhi ECAM 20/22 (De'Longhi Magnifica S). It is not exact copy of the original part. It is optimised for 3D printing. The change doesnot influence the…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If ever someone asks you to get rid of those loose ends, this is what you'll be looking for. Printed with PLA: 2 perimeters 15% infill 0.4mm nozzle 0.2mm layer height (use .10-.15mm for threads with V2) Increase infill percentage if you…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena jednego wariantu
Magnetized tops for Redgrass painting handle with groves for 40 mm bases. Requires 8x3mm magnets. There are also storage plates available to manage your minis during paining. The rack for those plates are also working, just stacking…
Wydruk około 1,58 €–1,94 € nettoWstępna wycena jednego wariantu
Adapted from sensa.co emoji library. Build Instructions: Print file/s Glue on handle with hot glue or epoxy (Optional) Enjoy/try not to get fired
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Check out this youtube tutorial to make your own! Day 7 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION - YouTube The handle may not fit your bike, so I invite you to edit the attached fusion360 file's hole to match…
Wydruk około 7,81 €–9,54 € nettoWstępna wycena jednego wariantu
Description Use Case I remixed this GPS support model so that it holds on a Ø12 mm tube. Be careful to take a break during printing to slide the nuts that will be held in place during tightening. Hardware need: 2 Vis CHC M8x25 2 M8 brake…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This handle can fit briefcases with mounting hooks similar to those seen in the pictures above. The distance between the mountingpoints is 10-11cm. The model is scalable to fit other sizes. A modifier is provided to use “Fuzzy Skin” on…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
This is a buildplate holder for 5 buildplates of the Prusa MK3 / MK3S / MK3S+ / MK4 / MK4S / CoreOne with an added handle for improved stability, and thanks to that it is also easier to move around. It fits perfectly to the Ikea lack…
Wydruk około 10,79 €–13,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 3D printable ring fits securely around a Hydro Flask wide mouth bottle and provides a built-in loop for attaching a paracord handle. It's a simple, rugged solution for carrying your bottle on hikes, at the gym, or just around town —…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This set includes two models: Rim Tea Bag Holder – attaches to the rim (uchwyt na rant kubka) Handle Tea Bag Holder – hangs on the mug handle (uchwyt na rączkę kubka). The handle version allows you to adjust the height of the tea bag…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Very easy phone handler to print. Can be used whatever the phone. and also be used to handle your books or comics ;-) Print with Mini+ and Prusament Galaxy Black. Two designs: Phone Handler : for standard phones Phone Handler Large : for…
Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu
![Spray Can Handle Remix [Remix]](https://media.printables.com/media/prints/859626/images/6611885_bbd3037f-240d-4b9b-9ebc-4973d94d293e_148cf073-663b-4e1a-b3b8-cc37ddda6ed5/img_20240428_145622137.jpg)
![Rode Wireless Go Handle - Shorter and Thicker (Condenser Mic Form Factor) [remix]](https://media.printables.com/media/prints/708849/images/5560717_ae14a831-061b-4090-9d33-a60d35514964_04cd4bb4-c195-4a5b-b810-5629f3b2daa1/perspective.png)
