Liczymy pasujące modele…
This case is ONLY for raspberry versions with tower and NOT interlocking so don't print it if you don't have a tower because the holes and alignments are custom made. That said for those who want to print it get in addition to the files…
Wydruk około 2,25 €–2,74 € nettoWstępna wycena jednego wariantu
Remix of LCD cover (for MK3S+) to fit to Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 (model without power button - see: https://www.prusaprinters.org/cs/prints/70062-hyperpixel-4-touchscreen-lcd-raspberry-pi4-without ) - it is done…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Rpi4 arm mount attached to the left motor (X-axis) of MK4S.
Wydruk około 5,22 €–6,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Imported from Thingiverse. A couple of different cases for the Raspberry Pi 4. Low and tall version for Ø30 and Ø40 mm Noctua fans. Not sure about other brands, but should work for a couple of other ones. One version made to fit the 30x30…
I couldn't find a case for my Raspberry Pi 4 with PiJuice HAT and Waveshare PoE HAT installed so I made one myself. I use it for HomeAssistant but there is nothing HA specific so it can be used for anything else. FreeCAD source code is…
case for 7 inch 1024x600 IPS touchscreen and raspberry pi 4. case uses m2 screws to hold everything together.
Einsy Board + RaspberryPi 4 + DC-DC Stepdown, original case modification/remix, use original access door. Eisny-base.stl modification to allow for mounting rPi4 + dc-dc step-down converter while maintaining the original design look and…
Case for Pi4 and Hyperpixel4
Raspberry Pi3- Pi4- Pi5 10" Rack Mount Bracket Panel 2U - Staffa installazione Raspberry PI 3-4-5 rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col Update: Added versions…
I bought a Waveshare 4.3 display and case for mounting a R Pi 4 but needing to have a way to mount it, I made my own.. I didn't need the HDMI outputs, sound jack, or the gpio pins….. I made the case with access to the ethernet, usb A's…
This is a STEP file that fits the center console of the BMW i4. It is based on a 3D scan of a 2025 i4 M50. Images show what is possible, the file itself does not come with cutouts for holding items. Update: added the 3d scan mesh that was…
This is a simple frame to center an iPhone 14pro with case for more effective inductive charging on BMW i4. Without this my phone would slide around and periodically stop and start charging. This frame keeps the phone centered. While…
The case can contain up to 8 node (max number of nodes for ip address). Check the txt file in how_to_assembly zip for all the instructions you need.
I wanted to find a clean way to charge my phone while on a longer drive and connected to wireless Android Auto. As the built in wireless charger seems not to be able to charge the phone while using Android Auto, another solution was to be…
When using Klipper the original screen on the Aquila X2 (and the Ender 3 I suppose but I don't know if it uses the exact same screen mounting bracket, I doubt it) becomes useless, only displaying a Voxelabs logo. Until someone makes…
Version 2 now available: https://www.printables.com/model/1219990-ender3v3se-screen-and-octopi-mount I have left this up so that the basic screen or printer mounts can be used still.…
A remix of Panamaniac's TI4 organizer for POK+TE. Same size as his boxes, but with slots for the tokens to go in. Uses the same print strategy as the original organizer to get the hex pattern. Etsy link from Panamaniac:…
If you want to mount a Raspberry Pi 4B on a 3D printer with a 4040-profile frame, like the Anycubic Vyper, then this model is perfect for you. Print instructions PLA is recommended infill >30% quality <0.22mm Parts (Optional): 4x 3Mx8…
Print two - one for top and one for bottom. If you just want to attach it directly to a wall, use these attachment points . The hole spacing is at 25mm intervals. You will minimally need two of those mounted 100mm apart vertically. For…
Compact Console for Beamer/Touchscreen/Bible/... with integrated Pi/Waveshare Adapter/Powersupply -12cm Fan (optional) -12mm Powerbutton (optional) -Meanwell LRS-35-5 (Pi4) or LRS-50-5 (Pi5) Powersupply (optional) -2.5x5 screws (8x) for…
Now you can easily see the value of your planets when you get attachments. You need to keep you planet cards vertical, I'm using super cheap business card holders from amazon. There is an indent for a 10x1mm magnet to hold these together.…
Maturity: Very Good. 9 prototypes. In use since 2024/03. Hardware: 2x M4x16 ISO7380 to fix the screen case on the mount 2x M6x16 to screw the mount on the aluminium profile (M5 if you have M5 nuts) 2x M6 rail nuts Log: 2024/03 Initial…
Working I4 engine , engine block from @ericthepoolboy, pistons and crankshaft made by me. I made it actually work , can work with a electric motor. or any other motor that can be attached to the crankshaft. The model can also be used…
Build a professional straight camera mount for your Raspberry Pi 4 with Raspberry Pi Global Shutter (GS) or HD Camera support. Here we offer you the STL files for 3D-printed mounting parts, which have been specifically developed to…
Build a professional angled camera mount for your Raspberry Pi 4 with Raspberry Pi Global Shutter (GS) or HD Camera support. Here we offer you the STL files for 3D-printed mounting parts, which have been specifically developed to securely…
Build a professional protective frame for your Raspberry Pi 4 with integrated Waveshare 10.1" 1920x1200 High-Resolution Capacitive Touch Display mounting. This horizontal mounting variant with integrated mounting for high-resolution…
A remix of Panamaniac's TI4 organizer for POK+TE. Same size as his boxes, but with slots for the tokens to go in. Uses the same print strategy as the original organizer to get the hex pattern. Etsy link from Panamaniac:…
A stand for the AKAI EWI4000s. The design is split into two parts. It can be used as a whole while the top part (EWI Stand) can also be mounted on a standard saxophone stand instead of a flute or clarinet cone. Use an M5x25 countersunk…
GeoCaching 600: Hook zu Uni400 - KSW22-Mount Zusatzfunktionen: - Kombinier- und stapelbar mit Modellen 411-419 - KSW22: UP and DN Montage 4 Modelle: 645 - Hook - Öffnung 40mm - Haken Höhe 50mm - UP 646 - Hook - Öffnung 40mm - Haken Höhe…
GeoCaching 700: Hook zu Uni400 - Ø22mm - M6-Mount - Ø22 - M6-Mount Benötigt: 2x M6 - 4kt-Mutter - DIN 557 ( SW10 - 0.8D ) 4 Modelle: 746 - Hook - Öffnung 40mm - Haken Höhe 60mm 747 - Hook - Öffnung 40mm - Haken Höhe 60mm - mit Bohrungen…
GeoCaching: Konkav/Konvex-Aufsatz zu Uni400 - M6-Mount - Diverse Längen Zusatzfunktionen: - Kompatibel zu "Transport-Clips" und "Becher 301" - 4mm Bohrung - für Paracord 5 Modelle - Konkav - 30-120mm Länge 430 - Konkav - 30mm 450 - Konkav…
Compact Console for Beamer/Touchscreen/Bible/... with integrated Pi/Waveshare Adapter/Powersupply -12cm Fan (optional) -12mm Powerbutton (optional) -Meanwell LRS-35-5 (Pi4) or LRS-50-5 (Pi5) Powersupply (optional) -2.5x5 screws (8x) for…
this is an engine model key chain it's print in place so no worry about stuff like assembly ony thing you need is a keychain ring and that is pretty easy to put on
Supporto per scheda audio Focusrite 4i4 3rd gen, consigli riempimento 30% almeno. Possibilità di inserire il supporto sotto una tastiera.
Like the original author this 10 inch server rack plate was designed for building Raspberry Pi4 NAS servers
You've just stumbled upon a Case Enclosure Mount for your Ender 3-3 Pro /w Raspberry Pi 4 Model B & Hosyond 7" Touchscreen IPS Display. Upgrading your Ender 3? Hate your puny Ender 3 colorless BLUE LCD display? Or... Maybe you've upgraded…
This remix was created to accommodate the E3P_RPi4b_Hosyond_TIPS_Display (Case Enclosure Mount).
Nitecore Intellicharger i4 Pegboard Mounted Holder remixed from Ahmad AlAmrey's model together with the Multiboard Pegboard Click Hook. Print with supports
Simple under desk mount for the Focusrite Scarlett 4i4 4th gen. Needed parts: either the ventilated or the unventilated main body the front plate 2x either the big or small screws Additional parts needed: 4 wood screws for attaching the…
Mount for TP-link switch SG105 and PI4 on 5mm standoffs
Hyundai i40 Android Radio Mounting Bracket — a 3D-printable mounting bracket designed to fit popular Android head units commonly sold on AliExpress. It provides a secure, aligned installation in the Hyundai i40 dashboard by matching the…
Redesigned on 08/04/2026 check: I want to prevent the bowden tubes to enter the Space Pi box and avoid known issues. This is a design thought to modify the Space Pi4 dryer without irreversible changes to the box. No need to drill, glue or…
This is a STEP file that fits the center console of the BMW i4. It is based on a 3D scan of a 2025 i4 M50. Images show what is possible, the file itself does not come with cutouts for holding items. Update: added the 3d scan mesh that was…
You can use either double-sided adhesive tape, Tesa Powerstrips, or screws to attach the base plate to the wall. The housing is then hooked onto the base plate and held in place with magnets (10mm diameter, 2mm height). Version for…
Previous model worked but had some failures, mostly after drying cycles on the space pi. Also, I was not able to remove the 3 inserts left (without risk of damage), so I redesigned to adapter to better fit my needs. I kept the original…
Plastic holder Hyundai i40 - coolant rubber hose under the air intake, close to radiator. Printed PETG. INSTALLATION AT YOUR RISK.
This is a work in progress, but hosting the portion i've done so far. I've made the base structure have quite thin structural pieces so you should hopefully not use infill but just perimiters which will make the print speed much faster.…
This adapter wasn't buyable so I created it myself. Tolerance: 0.3mm Print it with something strong like ABS or CF20.
UNTESTED !!! This version is intended to be used with: https://52pi.com/products/52pi-ultra-thin-ice-tower-cooler-cooling-fan-for-raspberry-pi-4-model-b-cpu-fan it was draw and corrected based on this version:…
This version is intended to be used with: https://52pi.com/products/52pi-ultra-thin-ice-tower-cooler-cooling-fan-for-raspberry-pi-4-model-b-cpu-fan it was draw and corrected based on this version:…
Redesigned it from an old .stl download. Cut it into half to fit only 1 night vision lens. Made the cable easy access It will fit in a 8.1mm ball holder
Den Halteteil habe ich aus PLA+ gedruckt. Die Schienenbefestigung habe aus TPU A95 hergestellt. TPU A95 von 3DJake Dieses Filament ist auch druckbar mit Bowden-Extruder. This filament is also printable with Bowden extruder…
I was inspired by "Hooli Gavin Belson Signature Edition Box 3 - Silverstone ML08 faceplate by benhoad" ( https://www.thingiverse.com/thing:4096255 ), and decided to model and print a new Raspberry Pi case for my KODI. This is still…
I created some simple Hyperlane Or Warp Zone spacers for TI4. These are used to keep the hex count per player consistent with a 6 player game. Works for 3, 4, or 5 players. You just have to print one set for each player less than 6. Print…
Para imprimir sin soportes. Para separar de la pantalla pongo unos topes.
*only works for ms chassis assembly requires : 2 * m2 screws at any length 2 * m2 nuts or you can also glue it.
!!!!! The printed parts are not verfied yet ! !!!!! !!!!! I just made this page in advance before last verification of 3d files !!!!! These are mounts for electronic parts in a typical Klipper hardware setup. There are : Raspberry Pi 4B…
Sleek Adapter to fit your Garage Door Opener snuggly into the Cupholder V 0.1: still a pinch to high, need to cut bottom away due to original rubber insert, also, lid won't close in this position. Will do another version where the remote…
Simple hanging mount for raspberry pi, prints in about 70 minutes on a Prusa Mk4.
PIKVM case supporting the Raspberry Pi4, USB-c power/hid splitter, RJ45 ATX connector, and a 0.96" OLED display
requires smoothing the cylinder walls and everything else that does not fit together
USB port holder to replace the factory fitted aux in port on a Hyundai i40.
My model serves as a connector between the models 'Hyperpixel 4' LCD Cover Display' and the 'Cable Entry Ikea Lack".
after various searches for ideas i found this result via google: https://bit.ly/392aYQR I then built a similar device because I needed a linux device for diagnosing the components in our vehicles. I wrote my own GUI for it, so that I can…
I have a home assistant server made from RPi4 and it was quite messy with all the cables. So here is an unique case, that hides then in a way, that all come from back side. The housing offers a bit of space for using the header pins -…
Habe für mein Gehäuse eine Erweiterung erstellt, in der ich meine M.2 SSD mit USB Adapter einlegen kann. Mein Gehäuse ist von 52pi und hat die Maße 62 x 90 mm Hier die SSD und Adapter auf Amazon… M.2 SSD: KINGDATA SSD M.2 2242 128GB Ngff…
El diseño es un case compacto y funcional que alberga tanto una Raspberry Pi 4 como una placa BTT SKR E3 Mini V3, con espacio adicional para ventiladores para mantener una adecuada refrigeración. El case está diseñado como print-to-place…
As this is a remix, please refer to the original for most instructions. Here I only detail my changes. I suggest you do not print my files, but instead download the SCAD file and use OpenSCAD to export your own print files. See Caveat…
So I can't help noticing someone hasn't already made a 3D printed version of DHS suspension for MS chassis….I mean people been doing these mods for over 20 years, but mostly Tamiya spec mods that are both time and money consuming to make.…
I took the HyperPixel4 enclosure created by SuperWoodle (https://www.thingiverse.com/thing:4114747) and mixed it with a foot mount to fit onto my Hall Precision SingleCell Enclosure. Wanted a better way to mount OctoDash in a manner that…
Update evening 12/15/24: I've added the case to support the LCD screen. Simply added a 2mm notch where the screen would mount so the metal bracket and the case can sit flush. Additionally, I've added the lid to this as well in the same…
This mount allows one to attach a Raspberry Pi 4 to a 3D Upfitters 3d printer enclosure . This is a base only and is designed to be used with any of the tops based off Malolo’s snap fit design Attach the unit to your favorite corner using…
Thank you to @Jeffery Smith for the initial remix.
First of all I want to thank @ Nelovy_08 for the model he provided. I remixed the model since I needed a bracket to hold a shelly plus 1 PM - 2 PM, also gen3, dimmer, i4 (and other shellys with the same shape) with the “plus Add-On”. The…
I designed this 3D model as a forehead protector for the Dye I4 paintball mask. The piece extends the upper coverage of the mask, providing additional protection for the forehead area without compromising visibility or comfort. It…
An 80mm screw top container for Omni4 Nova Miniature Storage Unit from Printable Accessories . Container fits on the 80mm Nova shelf and has holes for 6 x 2 mm magnets to perfectly match the shelf.
A I4 Channel based on the Underware project by Hand on Katie . Perfect to route in cables from the side when the multiword ist not mounted via screws but mounted with VHB tape.
Now you can easily see the value of your planets when you get attachments. You need to keep you planet cards vertical, I'm using super cheap business card holders from amazon. There is an indent for a 10x1mm magnet to hold these together.…
Maturity: Very Good. 9 prototypes. In use since 2024/03. Hardware: 2x M4x16 ISO7380 to fix the screen case on the mount 2x M6x16 to screw the mount on the aluminium profile (M5 if you have M5 nuts) 2x M6 rail nuts Log: 2024/03 Initial…
A v1 version of a rack shield for a RPi4 with cooler case, to be mounted in a 2U 19" rack system. Need 4x2.5mm, 20 mm long screw I've used this 19" 2U frame : DAP 2 HE Rackblende f. Modulsystem 10 Segmente MP-1
aspberry Pi 4 housing for Octoprint and camera.
A custom made rack to fit the Focusrite Scarlett 4i4 4th gen. In combination with a charger, a usbc hub and a ethernet dongle. This makes all the port accsessable on the backside as XLR chassis connectors. Requires som soldering. Tried to…
Raspberry Pi4 Slim Case with 30mm fan mount and 2020 extrusion mount. Materials: 4x (m2.5x10) Fan Mount 2x (m3x8) 2020 Extrusion Mount 4x (m2.5x12) Slim Case The Fan grill has a modifier so that you can change the infill pattern to match…
I made it for my V0-Pandoras Box mod. I have printed it from Polymaker ASA, standard voron settings.
A remix of a perfect model makes it an even better fit, making sure that it can fit. All credit for the sleek aesthetic and 99% of the design goes to benbojangles: https://www.thingiverse.com/benbojangles/designs There are two versions.…
Mount a Raspberry Pi4b with a passive cooling case to a Prusa Mini Rail. The cooling as is a GeekWorm Pi Armor case.
Wanted a pi4 fan that was tall enough for a heat sink and used 2510 fans (it's what i had). Also added holes for 3010. This is meant to be used with the voron back plates that use M2 self tapping screws. I included a tall and short…
Just a quick remix of shoeys_for_newey 's RPi4 mount for the ender 3 v3 se. I had to lengthen it a bit to fit a different case that I wanted to go with for my RPi4 that I have running octoprint. Here is the case I used:…
Working I4 engine , engine block from @ericthepoolboy, pistons and crankshaft made by me. I made it actually work , can work with a electric motor. or any other motor that can be attached to the crankshaft. The model can also be used…
Supports used under the overhang on the bottom of the stand.
For the extremely niche group of people that were part of Andcat's metal TG groupbuy. Print one of each for a half set and print two of each for a full set.
These are button replacements for the keyfob of a Hyundai i40 car. To replace the broken original rubber buttons. Two of the middle ones to be printed. Remove the broken rubber insert completely, print and place in correct holes .…
This is V2 of the stand I made for the SI 4732. Now with customizable name plate! Video can be found here!
This is a redesigned case based on Malolo's RPi4 Case. This was designed to fit the Raspberry PI 4 Model B with a Noctura 5V 40mm fan.
Low profile Case for Raspberry Pi4B It allows easy access to the GPIOs, 15mmx15mm heatsink Hardware needed: 4x M2.5x6mm screws to secure the board to the bottom case 8x 6mmx3mm circular magnets
