1387 modeli
I designed this silica gel container mostly for two reasons: I looked at several different silica gel containers and even printed a few but always found something I was not entirely happy with (I most likely didn't look at every single…
Wydruk około 3,30 €–4,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A desiccant canister designed to be mounted in the center of a spool of filament during storage to help keep the filament dry. The canister has a lock-ring which threads onto the opposite end from the cap, after the canister has been…
Wydruk około 2,30 €–2,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A small desiccant Box with 1mm wide gaps and a sliding opening. 90 x 45 x 19.8mm (Base) 90 x 45 x 13.5mm (Short)
Wydruk około 2,10 €–2,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
50mm diameter by 70mm tall desiccant jar (with screw on lid) that prints fast in vase mode and has TONS of air flow. There are even interior channels that allow for air from the perimeter to penetrate into the middle of the jar for…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
I'm finally moving away from gallon ziplock bags and storing my filament in 20qt Sterlite gasket boxes. I needed a bunch of (at least a dozen) desiccant boxes, and while there's tons of models out there, they're not exactly efficient to…
Wydruk około 2,46 €–3,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop for each one. I…
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop at for each one.…
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
Deprecated as of 1/11/2024: I have no longer use or recommend this model. This is what I use now. This model was great when I lived in Colorado it was all I needed because it only got humid when it would rain. But after I moved I found I…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This desiccant block fits the rubbermaid 21 cup containers. It has strong walls so it can support 1 Kg spools easily. Print Instructions: YOU MUST FOLLOW THE PRINT INSTRUCTIONS!!! Print using ZERO top and bottom layers (REQUIRED.) Use 45…
Wydruk około 4,59 €–5,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Take the sides off your used Overture spools and recycle!
Wydruk około 4,35 €–5,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact detail on our page. For more of my designs check out my website: https://3domcontact.wixsite.com/3dom This is my latest…
Wydruk około 14,49 €–17,71 € nettoWstępna wycena jednego wariantu
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x112.5mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Wydruk około 4,02 €–4,91 € nettoWstępna wycena jednego wariantu
all you need is a necklace chain
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
This was a well designed model but I didn't like that it was too tall to use with the stock cover. While I was shortening it I saw room for some improvements so I made the following changes: Reduced overall height just enough to fit the…
Edit V3: Logo rotated 180° and tiny gap in bottom left and right has been fixed! I didn't want to have to keep buying the correct size sachets from BL as they're expensive and don't last long at all. There's lots of similar versions to…
README It has come to my attention that there may be a different model of AMS that this 3D model does not fit. Please check if the tabs are the larger or smaller ones before printing. Thanks Not my design but I found a another user who…
To print this, use Vase Mode (Spiral) Change line widths from 0.4 to 0.7, increase by 0.3mm to each width setting Use 6 bottoms, this makes sure that the vase has a good connection to the top or bottom. Use ASA/ABS or PETG if you want…
FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…
This is a remix of SoftFever's middle dry box AND SamH's remix for AMS that works with round hygrometers that are available on Amazon in the US. Use the top from SamH's remix project. Updated 10-20 Added indent to back wall for AMS roller…
Print your own 3D printer filament Dry Box! Check out this video I made about it, including assembly instructions: Parts are optimized to work best with PLA filament. Easy printing, no support material needed. Snap-fit rollers, hygrometer…
Created a new Silica Gel Desiccant tray for the Bambu Lab printer. I think there must've been some revisions on the AMS unit because the trays I've tried on this site don't fit because the ribs are too long on my AMS. I tossed a rubber…
About I really love original Silica gel spool container by @gdrag. However I wanted to achieve Three additional goals: Make a spiral (vase) print to reduce filament and time, Add some distance between side holes and internal wall of the…
Should fit V1-V3 of the AMS. Printed in Black ABS. Sensor version needs support. Brim recommended since it is tall and narrow. Update: Version 2 w/increased desiccant volume.
There is no need to follow the curved form of the bottom of the Bambu AMS. So this is a straightened version of Eldon's model. It has a bit more volume, is easier to print, no supports needed!, and I designed a stand to fill the trays to…
Desiccant box for the K2 Plus CFS system with optional custom lid which snaps into place like the original. If you prefer the original, it's compatible. Print in provided orientation, no supports needed. Turned out great with Creality…
This is arguably the best tray for desiccant beads for the AMS of Bambu Lab. The lid has a recessed grip where a lamella of the tray sticks through. this allows to easily take out the entire tray including the lid but without the risk of…
This desiccant container fits inside the Creality Space Pi (single-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a double-spool…
I redesigned them mostly from scratch to make them slimmer and fit in th AMS with the new Hydra Pro mod. They're about half the size and fit in the Hydra Pro AMS like a glove. The convenient knurled tab on the back make it a breeze to…
After printing both versions of the center case that supported the addition of the hydrometer, I realized that while the second case looked better aesthetically it did not function well due to the lack of airflow around the unit. Remixed…
I needed a better desiccant container solution for my cereal box spool containers. Most models take too long to print and do not have enough holes. My design is 45% nothing. Meaning holes. Meaning air can flow freely. It uses 14g of…
**I did not make this model, TheBrotherBean made this on Thingiverse.com
Strongly recommend this remix/remodel ------------------------------------------------------------------------------ A really simple desiccant spool center for Bambu Lab's spools. Does not interfere with AMS and has an easy twist lid.…
A remix/remodel desiccant holder. My original model isn't ideal because when you swap it, you risk spilling the desiccant. Humebean's model is far more ideal because it has an inner lid, but I wanted to make a few tweaks. Uses 3d printer…
A desiccant box with lid for the Sunlu Filamantdryer S4 I printed this in ASA to prevent melting. According to @avastro_56112 PETG works well without warping. Thanks for the Information! Printable without supports. Please let me know if…
Update: 2024-02-25 – I added a new version of this model with a small lip around the edge, where the lid and body meet. This makes it easier to remove the lid, but still provides a nice snap fit like the original.…
A quick printing funnel to aid in filling the desiccant holder of the Polymaker PolyDryer Dry Box. Balances the holder when filling, quick to print, oriented for proper printing, print in any material, no supports needed.
This desiccant container fits inside the Creality Space Pi Plus (double-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a single-spool…
Inspired by the great idea of @skuidball about having a second container in the Polymaker PolyDryer box, I've decided to make my own design of an extra desiccant container. It fits the back side of the box and matches the ergonomics and…
Remix of https://www.thingiverse.com/thing:4887165 by TheBrotherBean and https://www.thingiverse.com/thing:410699 by EdisonM. Inspired by https://www.prusaprinters.org/prints/100362-fred-the-frog-but-hes-also-a-cowboy by AdamTKWallace.
Designed to fit inside center hole of filament spool in storage. Prints with no support necessary.
It is designed to be used together with the filament spool inside the AMS to create the maximum exposure of the desiccant to the internal air. Model shown in the photo : Material: PETG Printer: Default setting Bambu Lab filament spool…
July 28- A version of the tall wall tower without the text has been added. I feel like the tall wall version has essentially replaced the original short wall one so I won't bother with both anymore. Enjoy! Important Update Update July 15:…
I find this design works well in the Creality CFS. Currently there is an app to program the MIFARE Classic 1K RFID stickers to be used with the Creality CFS. App found here:…
Wanted a thicc cowboy Fred the frog but with a baseplate so I remixed it. I printed it on a Bambu Lab P1P with 0.4mm nozzle, 0.12mm layer height and auto tree supports for the hat.
This is a new, improved version of my original vase-mode desiccant container. I changed the side holes to extend inward rather than outward, so the outer surface is much less likely to poke holes in your filament storage bags. Total print…
Silica Dry Box for BambuLab AMS with rectangular hygrometer and vertical slots. Updated 10-20: Added indent to back wall for AMS roller fix from 'dietrich'. Also added the original lid for convenience. Updated 10-18: Updated with vents…
Źródło oznaczyło ten model jako treść 18+.
To print this, use Spiral Vase mode. Change line width from 0.4 to 0.7 (increase by +0.3mm to each width settings). I used ABS , when choosing the filament take into consideration the dryer can heat up to 70c. I designed this desiccant…
A nice design for a desiccant container that fits in most spools. It has a hollow core to maximise the exposure to the contained desiccant. Each container takes about 50g of 3-5mm desiccant. Print the pot at 0.2mm layer height with 2 wall…
This is a remix of Eldon's box, I wanted it printable flat with no supports. I also don't mind not using the default screen door so I can see if the desiccant has changed colours (I used a colour changing desiccant).
In the first use of the AMS of bamboo, I found that the humidity level was very high, so I put all the bags of silica I had inside it and try to solve the problem. After having dried all my material in an oven at 60ºC, yes, I know it is…
50 mm diameter and 63 mm height for 1kg standard spool or for your sock drawer ! I created it basically to store my filament spools in the best way. I place the container inside spools to save space because I store my spools in waterproof…
Aite. Didn't like the available desiccant pills I found, so I just made my own. I suggest making them from PETG. 2 reasons: 1) they can stay in the spool when you dry filament at up to 70 C 2) they will be flexible enough so the detents…
A combined desiccant and hygrometer holder that slips into the pour hole of the lid of a plastic dry goods box. I like this approach as it is neater than using baggies. With this setup, I can get internal humidity down to 10-15%.…
Remixed with bottom chamfers for better bed adhesion. No supports needed Fits new AMS ribs. Use a rubber band to hold the sides together Original model by @muddtt had fillets, which was a pain to print with ABS and other materials…
Desiccant container for Creality Space Pi Plus. ~ 300-350g. silica gel
Bambu lab thoughtfully included space in the AMS to store desiccant packs, but packs aren't ideal. If you've got a lot of filament lying around, chances are you've got some storage system that already utilizes reusable desiccant beads.…
This is a more universal version of the "Desiccant container for Spool" model originally made for Bambu Lab spools, which in turn was based on the model created by Gdrag . This container can hold the silica bags that usually come with new…
Description This is a holder for Desiccants in your CFS. I have my own mounted with a couple of Power Strips, and it seems to stay there :) I have included a .3mf file for the K2 Plus, and also a .step file if you want to slice it with…
Printed in black ABS with support. V1 - First Publish
Update v2 (Sep 14 2024): Due to popular demand, version 2 now features vertical grill vents and removes the arrow tabs on the cover. While version 1 works for most, some encountered printing issues, which this update addresses.…
Traliccio in scala H0, semplice da stampare e da assemblare fa la sua figura
Top Remixes Larger Version of Easy Access - AMS Desiccant Box - Remix Set by ken830 | Download free STL model | Printables.com Easy Access - AMS Desiccant Box Remixed by MR-52 | Download free STL model | Printables.com Easy Access - AMS…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … The basket fits exactly into the Creality Space Pi filament…
Update 10/19/2025: Some users have noticed that some brands of desiccant granules are small enough to fit through the slots of the original design. I've revised the design with narrower slots. I've tested the revisions with several brands…
After printing a couple other models that didn't seal properly, I decided to pick a well-designed model and make a few changes to seal it as much as possible. There are thee versions of the tray: The first version is meant to be printed…
Two of these fit snugly in the lid of the plydryer box. When loaded with desiccant they will not fall out and installed they leave room for the filament roll to spin freely. To make the mesh on the lid you must use a modifier shape with…
Update 1/22/2021 Added V3 box and Lid to make the snap more secure, but warning it is near impossible to get the V3 apart and will most likely break the snap on the lid when trying to separate. I never open them once filled, but if you…
UPDATE: 09/08/24 Added variant for eSun cardboard spools (AMS SDH Body eSUN - Cardboad Spool). UPDATE: 29/04/23 Added labeling to the SDH Cap (SDH Cap - Labeled) to prevent accidental spills of silica-gel beads during removal. DESCRIPTION…
designed in 2 halves , everything can be printed on one bed if printing on kobra 3 with pla+ load my 3mf file and slice it, supports come off easy each half will hold ½ cup of silica gel beads, could be also just filled with desiccant…
A Remix of Tinkr3d's great pi camera mount for the Prusa Mini. I realized my Pi Camera was raised about 2mm at the sensor, which made it impossible to fit in the original design. This design should now take this kind of Pi Camera…
Removable case for unpacked silica gel for the Bambulab X1 AMS, fit into original desiccant case. Use original case cap. Printing (<20min): PLA/ABS/PETG/… 0.4mm nozzle or less preferably No support Fill with silica gel, preferably with…
This is a remix of SoftFever's middle dry box for AMS that works with the hygrometers that are available on Amazon in the US. The same top is used from the original project. Updated 10-20 Added indent to back wall for AMS roller fix from…
First things first; make sure you have a filament that is suitable for the max temp of the dryer (70°C according to Creality) plus a margin to account for the heat being greatest at the back near the exhaust vent. Any filament with a…
Also available with ready-to-go print profile at MakerWorld for your convenience. This is a two-box set that completely fills out the available space between AMS first stage feeders. First, the boxes are lengthened (vertically taller than…
This model inherits the characteristics of PsychProd's original model: Fast print speed due to the clever basket design, great air permeability, and the option to add space for a hygrometer. In-spool locking: The one thing that bothered…
Yet another one of these - why?! I thought the original was well drawn but there were a few things I wanted to change. 1 - Make the walls a little beefier, 2mm thick 2 - Have the lid lock in place without a rubber band. None of the…
The original design is good. However, I am an engineer so I designed a few improvements for the design (make it more functional, less filament, repairable, etc) and saw several people in the original and remix comments had some good ideas…
A desiccant holder that lives in the center portion of the spool. It will fit spools with a center hole diameter from 53mm and ~64mm and a spool width of 53mm to 69mm. My goal was to fit both the Bambu Lab spools and the eSun spools. It…
I liked the idea of the original but because of all the small holes it takes forever to print. This version uses horizontal slots in the sides and also an interlaced bottom, making it print in about half the time of the original. I also…
Its a fairly easy print. Box and a lid separate. I have designed it for 0.6 nozzle. (But other size nozzles will work) 0.4 layer height works great. You'll need to drill one 4-5mm hole at the back of the lid to fix the box in. How to best…
This model is a remix of a model by humebeam . I remixed it to add holes along it's length for potentially more airflow through the desiccant inside. Even if it doesn't help, it surely doesn't hurt anything. The holes don't interfere with…
Remix created to make the box thinner and narrower. Specifically designed to fix in the EZY 18L Waterproof storage box with 1kg spools on top.
Hydra Compatible 4.1 Model updated for Errors in model that someone reported bambulab 2 row desiccant holders, this works with a hydrometer and sits behind it as well in total you can fit 5 inside, 6 without the hydrometer and you do not…
UPDATE 7/9/2020: Thanks for the comments here are the printing instructions - Print the containers close end down. Non-Hydrometer lid the closed side down. The hydrometer lid print with grip side up. UPDATE 7/1/2020: -Added…
This is a complete rework of an existing container @Matten79 made, that I have adapted for silica gel / desiccant rather than Calcium Chloride. It features a sturdy and printer-friendly design, multi-body lid so infill can be used to…
The 1 problem: Traditional jar-like containers often get in the way, or the desiccant ends up separated from the filament when wrapped in foil. Solution: The Banana Container, with its sleek, banana-like shape, fits into the carton box…
Enhance your Sunlu S2 filament dryer's performance with this breathable silica gel desiccant box. Designed to perfectly fit inside your Sunlu S2, this box needs no additional hardware or modifications. The box is designed to hold either…
500g(1lb) Silica Gel Desiccant Box (Updated October 2019 with 1mm thicker sides to make it stronger and easier to print) Box to contain 500g of colour indicating silica gel for your filament dry box. The dimensions without feet are 155mm…
Please don't forget to hit the like button when you find this model useful. Use your own silica gel beads using this box which fits inside the original spaces of the Creality CFS. Unlike other models I have included an "air tunnel" for…
General The original Filament Storage 2026 desiccant bin is designed to be assembled once and not come apart again. This works as long as (a) the option is available to dry the desiccant inside the bin, and (b) the part is printed from a…
Designed it to keep desiccant in place incase of removing it from Qidi Box Compatible model can be found here https://www.printables.com/model/1386559-high-capacity-desiccant-bin-for-qidi-box and with smaller holes…
I designed these side dry boxes to have extra grams of desiccant in the ams. Humidity is the killer of the quality for our prints so I thought I would use that little space in the corner of the ams to increase the amount of desiccant.…
This is an improved version of my original desiccant box . There were some comments about the lid being hard to get off, so I added a small lip around the lid to help with that issue. I recommend printing in PETG or potentially ABS. You…
This is a desiccant case for the SH02. It can be used with silica gel larger than 1.5mm in diameter. NOTE: Please print it in 0.15mm layer height without supports. Added 1.0mm gap models too(January 20th , 2025)
This model is a large capacity desiccant vessel for the Qidi Box. It's best filled with a funnel or chute with one of the side plugs installed and before installing it in the printer. It keeps the box much dryer than the original packets.…
Modular desiccant/silica filament spool size container. Optional top to hold Hygrometer. I like to store one to five roles of filament in a ziplock vacuum seal bag. I wanted a desiccant holder that could grow or reduce depending on how…
Note: I printed in ABS which works nicely but PLA seems too tight and hard to remove due to less shrinkage. V2 with PLA considerations on the way. The holder contains three parts. A threaded lid closes the desiccant compartment and the…
When printing the beautiful original model by schiko in ASA, I experienced issues with layer separation - perhaps due to the cold environment, which prevented the build volume to heat up sufficiently. Nonetheless, I decided to do some…
![Prusa Mini Raspberry Pi Camera V2.1 Mount [THICC]](https://media.printables.com/media/prints/49125/images/488106_ddcb8f95-46ac-44c0-a27f-c0ecdec9f0b0/render1.jpg)
