Liczymy pasujące modele…
I needed a replacement cover for a TI-89 Titanium edition that I was selling on Facebook marketplace, so that the buyer would be satisfied. Luckily, I had another TI-84 calculator that still had its original cover so I could recreate one…
Not a terrible lot to say - just some blanks for those of you that want to make your own versions.
Thank you MiGarro! Parkside X20V battery to Ferrex/Workzone Titanium tools (LY770XS-Li-20V-F battery) assembly info (original project): https://www.printables.com/model/329087-parkside-x20v-team-battery-in-ferrex-tool-battery-
Da bei der Galaxy Watch 3 Titanium ein Edelstahlarmband montiert ist, kann man die Uhr nicht auf der Ladestation IP-P6300 laden. Um diesem Problem aus dem Weg zu gehen konstruierte Ich eine Ladestation in die das Qi-Ladepad eingebunden…
I had a cheap (7.49) set of Harbor freight Titanium Hex Shank Drill Bit Set, 13 Pc. lying in the bottom of my tool box and decided the only way I was ever going to use them is if they where organized and in a case. So I got out the…
WARNING! You are working on a device or machine that uses mains voltage (120-volt / 240-volt AC). Some welders use electronic components that retain a charge after being unplugged from source power. Ensure that any stored electrical power…
Simple yet effective trap suitable for capturing shrimp, crawfish, minnow, and other creatures. Free, open-source, parametric; designed using ShapeScript . Features Corrosion-free (leaves no rust marks on your boat); No electrolysis next…
Add a new level of customization to your PC and replace the factory-fitted RBG-lit top bars with your own design. These designs have been modeled from Corsair's 2D CAD files.
This part snaps over the top of the TOAKS 750ml pot to retain the lid. Very useful to store a canister of fuel, camp stove, and foldable spork all in the pot. Category: Outdoor & Garden
The handle from these scissors from Costco kept breaking so had to design a fix for them!
Small model which fits 4 Kenwood Beaters. It's purposely designed with a small distance between the accessories to save space in the cabinet. The mount holes are measured 12.6mm, so they should fit the standard Kenwood Beater pins which…
Print in TPU/Flexible filament. There's a “test” unit of just 3 bit holders to print and test to make sure the fit is correct before you print the larger version. There are holes to view the bit size as well as small “nubs” to hold the…
This design is a dust collector developed for a titanium manicure studio, intended for installation in a table. It features a fully 3D printed housing and turbine, and incorporates a K 1438 cabin filter (21cm x 15cm) to capture dust from…
I recently switched to the A4T tool head with AFC and had to remove my backers to install the cutting bar base. I immediately saw my bed mesh get worse, so I designed this to allow me to run both. I'm probably going to make another model…
Corsair recently announced the Dominator Titanium's, a new line of DDR5 memory for your PC that allows for customization of the tops. I have added a few files that will give you a blank starting point if you are using 4 memory sticks.…
A tight friction fit to help keep you and your projects from getting poked by these scissors.
Pegboard holder for Neiko Titanium Step Drill - see picture. Hooks are optimized for DuraBoard 22 in. W x 18 in. H 3/16 in. Hole White Polypropylene Pegboards. Used this hook as a base https://www.thingiverse.com/thing:2468358 Used…
Logos for Harbor Freight brands Predator Vulcan Titanium Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you're looking for a particular logo, let me know and I'll try and get it for you.
RatRig VCore4 Titanium Tube Funssor CNC XY 6x M5 x 10-12mm 6x M5 Screw nut
As well as being unsightly, bird droppings are known to be problematic to high performance memory. Protect against this very real threat by installing bird control spikes on your memory today. 0.15mm or 0.20mm layers will work fine, no…
Magazine adapter for the Dart Zone Velocity, Adventure Force Accelerator, and Titanium. Allows the use of Rival Stickmags without blocking your aim. Still not quite perfect, firing can disengage the ammo release on the mag.
Lid for titanium cup from Decathlon.
Titanium World Tower is 41 Storey Premium Commercial Office Spaces Standing as a shining beacon, soaring to 154 meters, with 41 storeys, this commercial office space is a bold addition to Ahmedabad’s skyline. Titanium World Tower- An…
I took the universal design of the light panels from the death star and added them onto these RAM top bars
Print 5 pcs of this foot in TPU. Print solid! 50 top/50 bottom layer, concentric top&bottom, no support needed! Remove old silicone feet remainings. Pull out the screwpins with pliers. Save pins!! Don't discard, as you need them for…
This design connects 2, 3, or 4 Corsair DOMINATOR sticks into a single, clean-looking unit using custom top bars. The look is inspired by the new grille style on Corsair products. The idea behind PowerStack is to visually “merge” the RAM…
This titanium cup (micro pot?) is the latest addition to my camping gear. To prevent me from losing the lid, I've designed a transport clip. Unfortunately the Customizer is having an issue with my OpenSCAD file and refuses to render a…
The model was redesigned to look like a harmonica
FORD Focus Mk2 TITANIUM SIDE BADGE Wing Emblem Ive recreated the original TITANIUM SIDE BADGE Wing Emblem. It suits perfectly on my Ford Focus Mk2 2008. Hope you enjoy it as much as I am. All you need is some superglue to fix the writning…
Designed for easy printing. Screws onto ram. Cyberpunk 2077 themed.
quick model I made for my Kenny Titanium Graphic helmet.17mm total length 12mm thread length 6mm thread diameter 18mm outer diameter--- Modelo rápido que he hecho para mi casco Kenny Titanium Graphic. 17mm total de largo 12mm rosca de…
I have created this as a replacement part for the Schick Quattro Titanium razor with trimmer. I hope you find it useful, and more importantly, that it encourages re-use and reduces waste. While this razor is inexpensive, costing around…
When upgrading the X-axis aluminum extrusion to a titanium tube, this model holds the nuts in place on the inside of the tube to fasten a linear rail on top. The nut holder model suggested by the titanium tube manufacturer was excessive…
Customized version of http://www.thingiverse.com/thing:113015 Electron configuration 2,8,10,2. Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=113015 Instructions Using the following options:…
A turret for my Delta Scope! Use M2 heat insert and small screws to lock the rings
See this discord message in the toro discord for usage, and to discuss/troubleshoot. Printing Use something tough like PETG. Plenty of perimeters (at least 4 or 5). Thicker layers are better for strength, but you may loose accuracy on the…
VC4 Joiners with Tube Insert for Titanium Tubes (with or without Clinch Nuts). Simplifies mounting the gantry since most of the spacers arent needed anymore, also reduces the weight of the joiners a bit. This mod Moves the wipers for the…
I hollowed out the top bar blank so that the LEDs could shine through the top insert. With this pattern, you can make different inserts to go in the top if you don't like the flames - it has a base of 115mmx5mmx2mm. Use a white, opaque,…
Hello choom, don't be a gonk and use these faceplates for your Corsair Dominator Titanium RAM modules. Choose your favourite faction or use them all! Get creative and print them see through so your RGB gamer lights can shine through! ---…
Hola! elabore un intake en dos partes para instalar en una punto un filtro conico K&N y en el medio un alimentador F1-Z el intake es muy sencillo de instalar! Imprimir sin soportes necesitas 2 abrazaderas metalicas para unir el sistema!
Print in TPU with solid infill If your printer is well calibrated, it should pressure fit into the hole with no glue required, but double sided tape or super glue works if its not as perfect of a fit.
Add another level of customization combined with a boost in performance by adding or stacking this modular cooling block to your Corsair Dominator Titanium memory modules Variants Single or dual fans 10mm or 20mm fan heights Fan Mounting…
this is a racing exhaust that you can print ,paint and display at your desk or shelf heres the link to the correct paint (https://www.tamiyausa.com/shop/tamiya-color-lacquer-10ml/lacquer-lp-19-gun-metal/10ml-bottle/) and that shoud be it…
Here are four alternate top bar designs for the Corsair Dominator Titanium RAM: Normal height, hollow, no RGB shine-through Normal height, hollow, RGB shine-through Normal height, solid, no RGB shine-through Low-profile, hollow, no RGB…
Simple RAM caps for the Corsair Dominator Titanium Memory. The parts are separated so they can be stretched by multiple RAM sticks without breaking the portal effect.
You will need some strong glue to attach all the tiny parts together Note that the X-wing may have some problem when printed because of it's tiny details.
Corsair DOMINATOR TITANIUM RGB RAM Overlays These overlays for Corsair DOMINATOR TITANIUM RAM let you personalize the look by harnessing the built-in RGB lighting of the standard top bars. Two design variants included: Cyberpunk style…
If you own a Titanium MIG 170 and your 11lb spool adapter is missing or broken, you already know Harbor Freight doesn't sell replacements. Designed from scratch after opening a used machine that came without the adapter. Every dimension…
Customized version of http://www.thingiverse.com/thing:114247 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=114247 Instructions Using the following options: ring_spacing = 2.5 pin_radius = 2.45…
I think logo is must to be..
I combined four top bars into one big bracket to mount three 40mm fans to cool the RAM chips. The bracket mounts to the RAM with the same screws as the stock bars but to remain compatible, I created two elongated holes instead of the…
there are 3 versions of the Hex Dominator titanium top bars, both with lightpipe a) Single color version Single color/material no need to print the housing b) Standalone version It can be printed to be used without the need of the wave…
Kenwood Major Titanium Fot, improvment from the original. Bigger and wider. Use TPU, Slow settings 40-50 speed. Infill 10% Print Settings Printer Brand: Anycubic Printer: Kobra 2 Rafts: No Supports: No Infill: 10% Notes: Use TPU Category:…
Just a simple stand for a Schick Quattro Titanium. Very quick print. The two pieces are pressure fitted. Depending on the tolerances of your printer you may want to put a dab of superglue to hold them together.
Dominator titanium top bars inspired by the Chrome dino game. I didn't know wether to add the score in the top right corner or not. Tell me if you think it could look good :)
Hi all I broke the original cases and tried to model it in FreeCAD. src included. PETG
A lightweight lid for the Decathlon Forclaz 400ml titanium mug (also sold as the Quechua MH500 in some markets). The mug fits a BRS stove, a lighter, and a 100ml gas canister inside - this lid turns it into a fully enclosed travel cooking…
This is a 2 piece holder for a stereotactic frame to use with velcro straps and be able to stabilize one on patients head. It allows to set up a frame before a procedure alone not needing assistance of second person. I used velcro straps…
A customized RAM top for customized builds. Especially for Corsair Dominator Titanium modules. The go-to performance and aesthetic RAM producers. This custom set combines the most iconic game in pc history with Dominator RAM. Whether you…
TPU Ear Socks for Titanium Oakley Wire Frame “WINGBACK” Glasses. https://www.oakley.com/en-us/product/W0OX5089 I had my stock Oakley Silicone version ear socks tear. Too thin. Decided to make my own design. I measure the my Titanium Frame…
Added extra pin holes where thumb is to prevent movement if you are not gluing the parts together
A simple storage for your titanium tweezers. For use with tweezers such as this one: https://www.amazon.com/Canku-Tweezers-Titanium-Portable-Survival/dp/B09HKDNB4G/ You'll also want 2 5x1mm magnets for the cap. There's 2 version, one with…
This is the solution I came up with for a friend who was looking for a compact way to carry his utility knife in his ridge wallet. The model is only 4.6mm thick and takes up about the same space as 6 cards, so it might fit other wallets?
Rartrig V-Core 4 and 3 use an aluminium support bar for the x gantry. Changing the alu extrusion to a square tube made of titanium reduces the bimetallic bend. When installing the ti tube, something has to keep the nuts in place when…
Added stripes to the Dominator titanium top bars
This project includes three custom top-bar designs for Corsair Dominator Titanium RAM, each featuring an aerodynamic airflow deflector to improve cooling efficiency and reduce heat pockets between RAM modules: Full Deflector: redirects…
This is an entry for the Corsair design contest. This design showcases your personal card collection in the best way. This variation utilizes for RAM memory stick slots to showcase this card. There is a small slit in the side that the…
Hardware needed: M3x10 countersunk screw M3x3 Heat set insert Since it will most definitely will be used outside a lot I suggest printing in ASA. Printed my own solid with only walls. Included Solidworks file and step for anyone who wants…
Scale Model of Titanium Stick launches from space which is said to create earthquakes. Explained by the chairman of TUA what a joke Category: Props
The is a wavy redesign of the Corsair Dominator Titanium Ram that gives the top bars a textured look with RGB still visible because of wavy gaps carved in the side.
A short 8.5mm pot extender designed to fit a Boundless Voyage 750ml titanium camping cup, allowing for stowage of a Jetboil cooking system (from the Sumo, MiniMo and MicroMo), pot support and 100ml JetPower gas canister. This should suit…
The wall are thin: 0,5mm if you can, you better use an SLS printer If you use an FDM, take it slow and swap for a smaller noozle. there is a second model with only the top embossed
Dominator titanium top bars - blank avec des trous en forme de nid d'abeille.
A compact tool to loosen (or tighten) the bottom cap of Kenwood Titanium Chef blender & mixer attachments. The shaped jaws give a secure grip and extra leverage for stuck bases. Tested with Food Processor Attachment (KAH65.000PL)…
Made to fit the Funssor Voron Tiranium X gantry https://www.aliexpress.com/item/1005008211910316.html?spm=a2g0o.order_list.order_list_main.42.79141802bulQi2 I wanted to use lock nuts instead of Loctite. So I create a new insert that fits…
Replaceable RAM covers. With additional PIN mod, to customize the PC, with figures, landscapes and logos, on multiple levels to give depth. Laser cut plexiglass. RGB LED light passage
Beer Bomb Titanium Category: Hand Tools
My capswap adaptation for the Corsair Dominator. Features a design inspired by the classic look of Corsair hardware, complete with the older logo.
Corsair text and Hexagons added onto the Dominator top bars
Lego top bars for the Corsair Dominator Titanium that allow you to create your own little lego world on your RAM sticks!
Shield wall!!! This tiny Viking army will be your new ally to conquer all your battles and projects! Even with their broken shields they look imposing and scary! Just don't give them beer while working.
This is a simple version of the Corsair Dominator Titanium top bar with a double helix DNA pattern cut out of it. In order to retain the oval sections between the double helix, I had to leave a solid section between each section of the…
There are 2 parts on my model, the nozzle and the Dominator titanium top bars with the 'printed' part on it. If you can't print the version with the Prusa Logo and the Bambu Lab logo, please print the one without them (the files will be…
PLS Like, I don't have a printer yet
These are custom cracked-style Dominator Titanium Top Bars designed to fit on drumsticks. I gave them a worn, aged look with subtle crack textures for that raw, used aesthetic. The surface features wave-like detailing and airflow holes…
Made for the Corsair Components contest .
I said MEEP mf
General RAAM is gonna get you like Minh Print on 2 plates in my orientation or combine the files on one, that's up to you.
This hasn't been printed yet, please give me feedback👍 So, where to start? In principle, the RGB design works, 0.6mm walls + translucent filament. Test before printing ! I'm not a fan, so you'll have to do several assemblies to get…
RAM Top with bits holder, beer opener, key hanger, and blade holder.
The Top Bars on Dominator Titanium Ram
🎮 PACMAN Dominator Titanium Top Bar – Themed Decorative Upgrade Bring a touch of retro gaming to your keyboard or workspace with this custom PACMAN-themed Dominator Top Bar ! Designed to replace the titanium top bars found on Corsair…
you should need to have supports and screws
The Titanium Actuator Lvl 4 artifact from the game Egg Inc.
Hardware needed: M3x10 countersunk screw M3x3 Heat set insert Since it will most definitely will be used outside a lot I suggest printing in ASA. Printed my own solid with only walls. Included Solidworks file and step for anyone who wants…
Gridfinity storage location for a Harbor Freight Warrior 29 PC drill bit set. This proves a location to store the whole case of bits if you don't want to separate them all out. While quicker, this is more cost effective in terms of space…
This is a housing that you can put around your Titanium Innovations M-8800 Battery Charger to then allow you to mount it to a wall. Note that it's a tight fit. Some light sanding may be required though I didn't have to. Category: Tools
just a cover to personalize your computer RAM.
Top cap for Dominator Titanium ram sticks which allows you to display LEGO figures, bricks, and builds even allowing you to hang figures from the bottom bar. Adding this to your PC would be a great way to add extra customisation to your…
Dominator Top Bars with everyone's favorite pirate coin
![[Corsair Classic] Dominator titanium top bars](https://media.printables.com/media/prints/6a63543f-70a7-4806-8773-38b94de5cd5d/images/10141047_e58de986-d2ad-40f6-9071-608778b9d75d_091fcff0-3046-4b46-9b60-e3a08109641c/20250702_131859.jpg)
