P
Printablesfidoriel
RJ45 Ethernet Plug Protector
Repaired version of RJ45 Ethernet Plug Protector
- Pobrania
- 64
- Polubienia
- 2
- Ocena
- 0
Wyniki wyszukiwania: j45
Liczymy pasujące modele…
P
PrintablesEric Navarrete
Rack RJ45 keystone mount
I designed this model to be used at the back of my 10 inch mini rack. To unplug the rack for transport I just unplug the ethernet cable from the ethernet coupler mounted in the rear of the rack. You could use it in other ways as well. I…
- Pobrania
- 51
- Polubienia
- 3
- Ocena
- 0
P
PrintablesXypher2000
RJ45 Clip Replacement
I created this for work, we have an imaging station that we custom made 180 cables for. Almost half of them have clips broken through normal wear and tear for the last 8 years and current project needs consistent network connection to…
- Pobrania
- 36
- Polubienia
- 7
- Ocena
- 0
P
Printablesfidoriel
RJ45 Clip Protector
I ordered some cheap rj45 plugs from Aliexpress to replace broken ones. But tried to cheap out at the rubber back things, this will serve as a clip break off protector. Can be applied after crimping. Use some glue to hold it in place. To…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTomTom
folding mirror MST j45
nahradní zrcátka j45 sklopné. spojení mezi díly tiskovou strunou.
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
Printables
EtherCon Housing for RJ45 connector
I created this EtherCon Housing that fits over several generic RJ45 connectors on cat cables. Very handy when the locking pin broke of ect. Can be printed in the orientation shown without any support.
P
Printables
Cable Organizer / Cable Clip - Clip RJ45 - USB Ø3mm USB Ø4mm - Ø6.5mm - Ø7mm - Ø8mm - Ø9mm - Ø10mm
Cable Organizer / Cable Clip - Clip RJ45 - USB Ø3mm USB Ø4mm - Ø6.5mm - Ø7mm - Ø8mm - Ø9mm - Ø10mm 12/01/2025 added: CPM_USB CPM_Ø7mm CPM_Ø9mm 19/01/2025 added: CPM_Rj45 Long Patch CPM_Ø6.5mm 10/03/2025 added: CPM_USB Ø3mm CPM_USB Ø4mm…
P
Printables
Ethernet port RJ45 LED light cover
Ethernet port cover mounted on an RJ45 plug to block the LED light (normal and slim version)
P
Printables
RJ45 Keystone Case Housing Box Surface Wall Mount
I tried many keystone mounts but no one fitted my RJ45 keystone I had in my stock. So I designed my own. Features: Closed case Simple, sturdy and small Prints without support Strain relief with a small zip tie for keystones without…
P
Printables
Modular DIN Rail RJ45 Connector Holder – Customizable FreeCAD Design
This modular RJ45 connector holder is designed to snap onto standard DIN rails, providing a clean and organized solution for mounting Ethernet connectors in electrical panels or network setups. Built as an extension of my DIN rail base…
P
Printables
RJ45 Drop Jaw Ethernet port cover for Dell Latitude/Precision 5520/3560
Can be printed with PLA 0.4mm [email protected] layer height. Might also fit for other models
P
Printables
Gridfinity Box 5x2 RJ45 WorkNet Crimper
Коробка Gridfinity 5x2 для сетевого обжимного инструмента RJ45. Хотелось хранить их в ящике,как и другие обжимные клещи.
P
Printables
Gridfinity tray for RJ45 Crimping Tool
Gridfinity tray for RJ45 Crimping Tool Gridfinity Dimension: 2 x 5 and 5 height
P
Printables
Rack RJ45 keystone mount
I designed this model to be used at the back of my 10 inch mini rack. To unplug the rack for transport I just unplug the ethernet cable from the ethernet coupler mounted in the rear of the rack. You could use it in other ways as well. I…
P
Printables
Raspberry Pi Zero 2W with USB and LAN RJ45 HAT Case
Designed for: Pi Zero 2W and Waveshare Ethernet / USB HUB HAT für Raspberry Pi Zero, 1x RJ45, 3x USB. Case with Snap-in Lid. No tools required. Use provided Stand-Offs in the Waveshare-Set. I used 1mm nylon-washers between the Standoffs…
P
Printables
10" RJ45 coupling rack
an 10" RJ45 coupling rack for adding couplers to your server, original model: https://www.printables.com/model/244377-r
P
Printables
Back Voron Trident mesh skirts - IEC320 C14 and RJ45
Meshed honeycomb-style Voron rear skirts designed with integrated cutouts to accommodate an IEC320 C14 power inlet and a panel featuring two RJ45 connectors. The meshed body must be printed with no top an bottom layers, and 25% honeycomb…
P
Printables
Módulo keystone RJ45 para bastidor marca Soma
Módulo simple y doble para conector RJ45 hembra (keystone) marca Prosoft Cat. 6 para bastidores de la marca Soma.
P
Printables
RJ45 insert (Keystone, Legrand) threaded weather resistance passthrough
In theory the cap should protect the connector from dust and moisture but I have not as yet added features for an O ring or otherwise to seal the water out. I used some dielectric grease to help with water protection for now. Printed with…
P
Printables
RJ45 Ethernet Cable Connector Repair
This design is a unique combination of the short designs, where the latch is fixed at the connector and the longer designs, where the clip is mounted to the cable behind the collet. The design considers the exact dimensions of the collet…
P
Printables
RJ45 Keystone Bracket / Patch Panel – 1, 4, 5 & 8 Port Versions
Under-Desk RJ45 Keystone Jack Bracket – 1, 4, 5 & 8 Port Versions Clean and sturdy snap-fit mounts for standard RJ45 keystone jacks. These brackets let you neatly install Ethernet ports under your desk, shelf, or workbench for easy access…
P
Printables
Plantilla_RJ45
Esta Plantilla facilita el corte e inserción del cable de red cat5-8 a conectores RJ45, al tener las medidas justas para el conector. link: https://www.tiktok.com/@mel3d71/video/7626673639789792534…
P
Printables
ABB Chiara RJ45 Keystone
Some ABB components are not easy to find in some parts of Italy, especially if you're not a professional electrician. Since I'm not one, and one of my keystone holders broke, I decided to print it myself. Every single measurement has been…
P
Printables
One Gang Low Voltage Shroud/Adapter (rj45 etc)
Shroud for those moments you cut out too much of a dry wall, wood panel for mounting a low voltage one gang box Printed in PETG with 50% infill for more strength but it's by no means a structural part
P
Printables
12-Port RJ45 Switch Migration Tool
This is a pretty simple model to print. I would go with something more than 2-walls to give it a nice sturdy tool-like feeling. The added 4-port block is for testing purposes. I found that printing this model at 99.1% gave the more…
P
Printables
RJ45 Keystone Ethernet Network Cable Mount
I have another advanced version of this that has various sizes (30, 32, 35, and 40 to ensure your adapter will fit). https://www.printables.com/model/886799-rj45-ethernet-cable-rj45-keystone-mount I could not find something to protect the…
P
Printables
RJ45 Keystone Ethernet Cable Mount - Various Sizes
I could not find something to protect the end of my carefully installed shielded 50 foot cable snaking through my house to my computer so made this rj45 jack mount. This a raised mounted rj45 keystone jack for Ethernet cables. You also…
P
Printables
RJ45 Switch Migration Tool
This is a tool to assist in the migration of a Cisco or Meraki switch with a new Cisco or Meraki Switch. You would move the existing cables from the old switch to the tool allowing you to keep the cables in the same port locations. Then…
P
Printables
Ethernet RJ45 keystone socket wall plate
just a simple single port wall plate for ethernet with a RJ 45 keystone
P
Printables
RJ45 Dust Cap
RJ45 dust cover for any device (switch, router, computer...). Pull tab that make easy to remove Wide enough to cover all the port but small enough to fit in side by side port (network device). Print Settings Printer Brand: Creality…
P
Printables
Prusa Mini Emclosure RJ45 Extension Holder
RJ45 Extension Holder for the Prusa Mini Enclosure, which can be screwed to the back of the enclosure. This makes the enclosure more transportfriendly because now you have an easy to reach connection for your LAN cable. All you need is a…
P
Printables
Keystone Cap for Ethernet RJ45 Cable Spool
Remixed the Keystone Cap to fit @ChristianBra_1608057 's Cable Spool. Recommend printing it standing on it's side, as it makes the flanged arms stronger, I used normal grid support.
P
Printables
RJ45 Connector Protective Cover Boot / Cap / Sleeve
This is a remix of https://www.thingiverse.com/thing:2943086 modified to match the RJ45 connector specifications. There are several versions of the same model, regarding the wire diameter: 5.00 mm (4 dots) 5.25 mm (3 dots) 5.50 mm (2…
P
Printables
Protector de patilla para cable RJ45
A mi marido siempre se le rompe la patilla del cable RJ45, así que me pidió que le diseñara un protector para evitarlo. Imprimir boca abajo con soportes orgánicos.
P
Printables
RJ45 Wall Plate Outlet Spacer Bezel
I designed this spacer to fit behind an RJ45 wall plate and provide 5mm spacing so the wall plate can sit flat when installed. I installed my wall plates by drilling a hold in the ceiling and running the ethernet cable through. In order…
P
Printables
Adapter Frame for KeyStone RJ45 in Wall Outlet Plate
This 3D-printable adapter frame is designed to fit KeyStone-style RJ45 jacks into standard wall outlet plates. It supports existing wall plates commonly used in homes and offices, making it easy to organize and expand network cable…
P
Printables
RJ45 easy loader
This print is intended to help you load wires into the RJ45 easy plugs. Just put it in, one by one and slide it a little and you are good to go. Loader should fit int the plug and is supposed to stay inside. Using 1 line model is…
P
Printables
RJ45C-L4SAS Fastening Spanner (Advanced Navigation GNSS Compass / Nortek VMADCP)
Fastening spanner for the RJ45C-L4SAS connector which is used on the Advanced Navigation GNSS compass. Depedning on your printers tollerance you may need to file the knurling sligtly, it is desinged to be a loose-ish fit to prevent over…
P
Printables
RJ45 / SlimLAN cable holder/fixing (*.f3d)
a simple cable holder for slim LAN/RJ45 cables. Printed solid in PETG :)!
P
Printables
RJ45 Dust Cover
Designed to protect the RJ45 sockets of my small Ubiquiti Unifi Flex Mini Switch that sits upright on my desk. Can be used on any other RJ45 sockets… Recomended Material : PLA Nozzle Diameter : 0.4mm Layer Height : 0.2mm Support : YES…
P
Printables
Lenovo ThinkCentre M920q - Slot-cover/baffle for 2.5GbE RJ45
M920q cover for a 2.5gbe A+E keyed RTL8125B adapter. Probably also fits other Lenovo ThinkCentre variants
P
Printables
Lenovo ThinkCentre M920q - Slot-cover/baffle for LSI SAS 9207-8e + 2.5GbE RJ45
It's a very tight fit, and the SAS card is slightly unaligned but it fits, and it works \_(ツ)_/
P
Printables
EtherCon Housing for RJ45 connector
I created this EtherCon Housing that fits over several generic RJ45 connectors on cat cables. Very handy when the locking pin broke of ect. Can be printed in the orientation shown without any support.
P
Printables
Cable Organizer / Cable Clip - Clip RJ45 - USB Ø3mm USB Ø4mm - Ø6.5mm - Ø7mm - Ø8mm - Ø9mm - Ø10mm
Cable Organizer / Cable Clip - Clip RJ45 - USB Ø3mm USB Ø4mm - Ø6.5mm - Ø7mm - Ø8mm - Ø9mm - Ø10mm 12/01/2025 added: CPM_USB CPM_Ø7mm CPM_Ø9mm 19/01/2025 added: CPM_Rj45 Long Patch CPM_Ø6.5mm 10/03/2025 added: CPM_USB Ø3mm CPM_USB Ø4mm…
P
Printables
ABB Decento Adapter - RJ45 + TV/SAT/R
Description: This adapter is designed for ABB Decento sockets, allowing you to combine one RJ45 CAT6 connector with an OEM antenna connector for TV/SAT/R. It replaces the standard module with two RJ45 connectors, offering a practical and…
P
Printables
Sleeve for RJ45
Print vertically, no support, with a brim. A little cleaning inside at the end and it's ready to use. Fits round network cable.
P
Printables
RJ45 Universal Patch Cable Manager for Alu2020 Profile
Universal RJ45 Patch Cable Manager / Cable PASS-Through for Alu 2020 Profile Suitable for: 2020 -3030 -4040 V-Slot T-Slot Alu profile - Rack Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks
P
Printables
Under Shelf/Counter RJ45 Cable mount
See the picture to see how I am mounting an RJ45 socket under my bench's shelf. Screw holes are for #6 x 1" Wood screws. PTEG.
P
Printables
Stackable Gridfinity Holder for "ZoeRax" RJ45/RJ11 Cable Crimper
The crimper can be purchased on Aliexpress: https://aliexpress.com/item/1005006474712295.html The model has a hole for the crimping tool, and another small hole for the spare blades.
P
Printables
Fortigate 40F RJ45 keystone Bracket
I recently got a Fortigate 40F and found Ewert Snyman's bracket. But i wanted to add RJ45 ports to connect to my switch.
P
Printables
Classic cruiser FJ45 Scx24 Deadbolt body shell.
Might have to fix some issues but easy and cheap to print.
P
Printables
Rj45 connectors holder Gridfinity
Gridfinity Rj45 connectors holder, 2x1 non stackable Thinkercad link: https://www.tinkercad.com/things/12N2qngDxfW-rj45-connectors-gridfinity
P
Printables
Trendnet RJ45/RJ11 Crimp Tool Gridfinity
A shadow board gridfinity bin for a Trendnet RJ45/RJ11 crimp tool.
P
Printables
RJ45 to USB Adapter Holder for IKEA SKÅDIS
This custom RJ45 to USB Adapter Holder is designed to securely store your RJ45 to USB adapter on the IKEA SKÅDIS pegboard, offering a neat and organized solution for keeping your adapters within easy reach. The holder ensures that your…
P
Printables
Slim RJ45 keystone bracket for surface mount (Panduit CJ588)
Version 1: Has holes for 2xM3 threaded heat inserts Version 2: Has holes to insert regular M3 nut Be sure to print like this without supports: After print this area might need a little touch up with exacto knife: P.S.: Just a friendly…
P
Printables
Starlink mini Rack für 12V + RJ45 cable converter + WLAN Router
Passend für: WLAN Router GL.iNet GL-MT3000 u.a. > https://amzn.eu/d/apJ6SKm EDUP Starlink Mini Ethernet Adapter - PoE Injektor & Splitter, 150W GigE> https://amzn.eu/d/dSvBxjG DC DC 8V-32V zu 5V Spannungswandler USB Typ-C 3A 15W >…
P
Printables
Ethernet LAN Cable RJ45 Protection Cap
The Ethernet LAN Cable RJ45 Protection Cap is used to protect connector of the ethernet LAN cable.
P
Printables
Light tower base with RJ45 connector
Needed a way to get several light towers (indicating 3D printer needs attention, or job done) back to the server room. Spare Ethernet lines already exist by every machine, so why not use that to carry the 12v to the light towers? Based on…
P
Printables
RJ45 Keystone Adapter
This is an adapter for RJ45 Keystone sockets that can be screwed into panels from the back.
P
Printables
Remix to RJ45 Wall Plate Outlet Spacer Bezel with Stand on top
I added a stand on top of the Bezel in order to support an access point that I had nowhere to place.
P
Printables
Gridfinity RJ45 Crimping Tool Tray
This is a remix of Animated Design Studios Gridfinity toolholder for RJ45 crimping tools. I modified the design to fit a wider variety of tool shapes by removing the center block that divided the handle from the main body of the tool. I…
P
Printables
Fortigate 60F RJ45 keystone Bracket
This is a remix of my remix of the left hand bracket to add more RJ45 keystones
P
Printables
Rj45 Cable wall holder
Simple Cable wall holder simple strong and easy to install No supports need. You will find two versions ( Double and Single cable ) Enjoy, Happy Printing
P
Printables
Prusa Bear Ethernet RJ45 Keystone Jack Mount
Add an ethernet port to your printer! Intended to be wired to a Pi mounted on the printer.
P
Printables
Cat5 RJ45 cable lock key
This is a remix of https://www.thingiverse.com/thing:2763124 Design is great just needed some tweaking in length key lip etc. This fits the Cat5 RJ45 cable locks from Panduit. You can't find the key by itself, and you have to buy a pack…
P
Printables
Ethernet wall plate with angled socket for keystone RJ45
I needed a 45 degree angled, single RJ45 wall mounted socket plate. This is based on the mounting for old RJ11 phone sockets (Sweden/EU), M3 screw-holes are 60mm apart. The socket slot fits one standard RJ45 keystone jack, I used…
P
Printables
Voron V0 Power inlet with RJ45 Keystone slot
No additional screws or heatinserts are needed apart from the original voron part which is one M3 heatinsert and 2x M3 BHCS screws
P
Printables
Ezviz RJ45 cover / bouchon
Bouchon pour la prise RJ45 des caméras Ezviz. On les utilise le plus souvent en wifi, cela permet de protéger la prise des intempéries. A imprimer en PETG pour la résistance aux UV et à l'eau, de préférence en 0,15
P
Printables
Plaque RJ45 Keystone (double et simple)
Use Conda for script if you want to modify dimensions: wget https://repo.anaconda.com/miniconda/Miniconda3-latest-Linux-x86_64.sh conda create -n cqenv -c cadquery -c conda-forge cadquery=2.5 python=3.10 conda activate cqenv
P
Printables
Rj45 Universal Patch Cable Manager / Cable PASS-Through 90 degree angle for Alu 2020 / 3030 / 4040 Profile
Rj45 Universal Patch Cable Manager / Cable PASS-Through 90 degree angle for Alu 2020 / 3030 / 4040 Profile Suitable for: 2020 -3030 -4040 -500 V-Slot T-Slot Alu profile - Rack 3d printer frame profile Server / Rack Resize to adjust…
P
Printables
USB and RJ45 plug removal key
USB and RJ45 plug removal key Greater security thanks to full insertion into the USB and RJ45 connector Prevents unauthorized connection of devices to a free USB connector Easy connection 1mm wire for the hook.
P
Printables
RJ45 Cable Tester holder for Ikea Skadis
Had to re-upload. Previous model was broken and wouldn't slice
P
Printables
RJ45 Ethernet Cable Clip Repair
These are replacement clips to fix broken ethernet cable clips. The clips attach to the Ethernet cable and replace the broken clip so that the cable stays locked into an Ethernet port. EDIT - For some reason Simplify3d doesn't like this…
P
Printables
RJ45 4-Port Plug - Unifi Enterprise 24 POE
I recommend using a .15mm layer height or better with a high infill percentage (50-100%) as it's possible for the insertable shank of the model to pull off of the cap with insufficient infill. Prints well in PLA or PETG, but PETG is…
P
Printables
Snagless Protective Boot for RJ45 Connectors
These are simple boots for RJ45 terminals. They're intended to be printed from TPU or some other EXTREMELY flexible material, otherwise, well, they just ain't gonna work… I printed these in an unbranded translucent purple 95a TPU. They…
P
Printables
PCI low profile bracket for RJ45 M.2 to 2.5 GbE from AliExpress
Low profile PCI bracket for M.2 to 2.5 GbE and similar adapters from AliExpress.
P
Printables
RJ45 Ethernet Cable Clip Repair - parametric
Quick fix for RJ45 plugs whose little clip broke off. Because there are so many variations of RJ45 plugs and every one needs a different version of this model, I uploaded a .STEP file and an editable Fusion 360 file where all the…
P
Printables
Voron Trident Skirt power inlet with RJ45
The power inlet hole in the original skirt does not fit my setup, requiring modifications to accommodate my specific power connection. To ensure proper integration, I need to redesign or adapt the skirt to include an appropriately sized…
P
Printables
Mock-up of Waveshare ESP32-S3-ETH OV2640 CAM LAN RJ45 POE module
made a mock-up for this board from Waveshare with POE-module and OV2640-camera so that I could build an enclosure around it. The enclosure can be found here Updates 2025-06-15: added LAN-LEDs and WS2812 LED locations
P
Printables
Enclosure for Waveshare ESP32-S3-ETH OV2640 CAM LAN RJ45 POE
This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources. not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P Addons I also made an…
P
Printables
Rj45 Ethernet 3 in 1 Cable Straightener, Dust Cover, Keyring
I kept misplacing my RJ45/Ethernet cable straightener and couldn't decide between placing one on a keyring or sticking one in a spare port ready for me when I need it next. Why decide when you can have both! As a side feature, you could…
P
Printables
Bosgame B100 RJ45 Backplate and Stand
For a modified Bosgame B100 mini pc. I removed the mkey wifi/bluetooth card and added an mkey 2.5G NIC. The backplate provides a spot for the RJ45 connector to slide in without being too bulky or hard to connect/disconnect. I left it as a…
P
Printables
Minimalistic RJ45 Angled Ethernet Wall Plate
This model was made to create a jack with as small a footprint as possible in a drywall. I printed it as it is in the STL, leaning a bit more towards the back of it so the front looks as clean as possible. This one needs supports.
P
Printables
CAT6A RJ45 Keystone Patch Panel Conversion
I needed to convert my old patch panel that uses crimp termanials to RJ45 keystones (yes I hate working with termination, and this is just easier. And it uses the origional mounting screws. Please note - the edge bumps on the keystones…
P
Printables
Modular RJ45 Jack Switch Helper
I recommend the following for the Slicer: Manually draw the Seam Line on the edges that are not part of the slide in and set the seam position to nearest Elephant Foot compensation to 0.2mm Wall Generator Arachne To save filament and time…