Wyniki wyszukiwania: lacke

Sortowanie

Liczymy pasujące modele…

P
Printableseli

Plackers Case with Lid

I used two 10x3mm magnets to hold it closed. Use super glue to hold the magnets in the pockets.

Pobrania
961
Polubienia
503
Ocena
5
P
PrintablesKevinAkaSam

KlackEnder Probe

KlackEnder Probe Rev2.1 KlackEnder Probe - Simple, fast and cheap! What is this about? Adaptation of the Klicky / Quickdraw Probe for the Ender 3 and comparable Creality printers. The probe is compatible with all printers that use the X…

Pobrania
730
Polubienia
156
Ocena
5
P
PrintablesModBot

KevinAKASam KlackEnder v2.1 For Micro Swiss NG Extruder

I recently installed the awesome KlackEnder mod on my Ender 3 V2. The stock dock and mount needed to be revised to work with the different size tabs that are on the Micro Swiss NG backplate. The original probe block and retainer are fine.…

Pobrania
406
Polubienia
59
Ocena
4,8
P
PrintablesMegamini10

JoJo's steel Clacker Balls

Joseph Joestars steel clacker balls from JoJo's Bizarre Adventure part 2. There is both a full model version and a split. I printed at 35% infill.

Pobrania
395
Polubienia
40
Ocena
5
P
PrintablesAxelC

Placker dispenser

The challenge I had was that my plackers comes in a plastic bag packaging which is hard to store in my bathroom cabinet and risks falling out whenever I open the cabinet doors. The idea is to create a convenient dispenser thus eliminating…

Pobrania
327
Polubienia
70
Ocena
4,75
P
PrintablesMZ4250

Kobold Slackers

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…

Pobrania
325
Polubienia
63
Ocena
5
P
Printablesjfedor

M57 Clacker style switch

This is a button/switch in the general shape of a Claymore mine detonator. It uses a guitar pedal stomp switch for a satisfying click. I put a 3.5mm connector on it so it can be used with devices like the Xbox Adaptive Controller or HID…

Pobrania
300
Polubienia
39
Ocena
4
P
PrintablesJopperFPV

Placker Dispenser with Ejector - remix

Placker Dispenser with Ejector kinda hokey but seems to work.

Pobrania
228
Polubienia
36
Ocena
4
P
PrintablesErickSaint

Elegoo Neptune 3 Pro/Plus/Max KlackEnder Remix

I consider this a rough draft, but it is a working install. Still need to fine tune things. Files remixed to fit the left side location of the factory induction probe. The probe dock was modified to fit the botton lug of the X gantry and…

Pobrania
203
Polubienia
49
Ocena
0

Klackers (Print in place)

These are klackers or noisemakers that print in place as one part! To have a successful print, you must have good adhesion to the bed. If not use helpers or a brim. For the loudest klackers, more walls and infill the better but watch out…

Pobrania
180
Polubienia
31
Ocena
5
P
Printablese_Decker

Leitergolf, Clackers 1970s

! Be careful you can hurt your hand ! Printed in PLA Layer height 0.26 100% infill Wall Line 7 Paracord 60cm / 24in (or old shoelaces) wikipedia.org:…

Pobrania
176
Polubienia
51
Ocena
4,5
P
PrintablesMawoka

KlackEnder for Elegoo Neptune 4

Why KlackEnder for the Neptune 4? I got really annoyed by the temperature-shifts by the original inductive probe. When I heated my bed to 110°C for ASA and the printer homed, the z-offset got messed up, so I wanted something else: a…

Pobrania
132
Polubienia
53
Ocena
0
P
PrintablesKevin Micallef

KlackEnder for Ender 3 Pro

Looks like the hot end mounting plate changed on the Ender Pro. One hole was moved 1mm to the right and the x rail extrusion hit the bevel of the original design so I removed some material.

Pobrania
100
Polubienia
19
Ocena
0
P
PrintablesHenryGamer20084

Plackers Holder/Storage

I made this small storage for Plackers to fit in a small slide out drawer I have attached under my desk. I had limited size requirements in order for it to fit in the drawer. It is about 19mm tall. I have included the fusion 360 file if…

Pobrania
89
Polubienia
16
Ocena
0
P
PrintablesFrutti

Plackers travel case for 3,4,or 5

Was looking for a travel case that matches plackers that we use at home and ended up creating one. Feel free to adjust for your needs.

Pobrania
88
Polubienia
12
Ocena
0
P
PrintablesCURS3D

Eclipse 2024- I Blacked Out Coin

A souvenir coin for the people excited about the 2024 solar eclipse. I'll be updating with new states within the line of totality (though I probably will not print all of them). Print face down for the best results. For commercial rights…

Pobrania
86
Polubienia
11
Ocena
0
P
PrintablesBrandiLove

Clacker toy V2 with more support for balls

this is an old toy I used to play with as a kid I have already uploaded one version of this toy and I created this one after some feedback let me know that the support for the balls may not be good enough and they may break off so I did…

Pobrania
75
Polubienia
10
Ocena
0
P
PrintablesSpriggy

Ender 3v2 Stealthburner CW1 Klackender

This is a very simple remix of igalopakas design ( https://www.thingiverse.com/thing:4614384 ). The change is that it is updated to allow the Stealthburner with CW1 to be mounted to the Ender 3 v2 (may work with others that use the same…

Pobrania
75
Polubienia
17
Ocena
5
P
Printablesdriftrotor

Voron V0.2 Fridge Door / Colony Clacker Stealth Skirts 2.8" Waveshare screen

Voron V0.2 Fridge Door / Colony Clacker Stealth Skirts 2.8" Waveshare screen as the tittle suggests, you are now out of breath reading it… lol but this is the Stealth Skirts option if you want to fit the Waveshare 2.8 inch screen to your…

Pobrania
74
Polubienia
26
Ocena
0
P
PrintablesTRex22

KlackEnder for Ender 2 Pro

KlackEnderPro2 A modified version of the KlackEnder project to work with an Ender Pro 2. Its a remix from daaar on Thingiverse.com There weren't step files included so I had to modify some of the models creatively. Tolerances are between…

Pobrania
69
Polubienia
14
Ocena
5
P
Printablesgeb

KlackEnder Probe Elegoo Neptune 2 remix

The KlackEnder probe adapted for the Neptune 2. You'll lose a few mm's on your X axis using this probe with the regular Elegoo X axis plate. You can change the X axis plate to an Ender 3 one for 3 bucks to fix this but then you have to…

Pobrania
67
Polubienia
8
Ocena
0
P
PrintablesBolado

Sovol SV06 Klicky Probe Mod - Based on KlackEnder

For usage and configuration I recommend checking the official KlackEnder website KlackEnder – Simple, fast and cheap! – KevinAkaSam's Sandbox and maybe watch videos on how it works and how good it is (it is good) . Awesome user biering…

Pobrania
63
Polubienia
15
Ocena
5
P
Printablesnpwoodworx

klackender modified for m3 screws

this is the klackender ender 3 self leveling probe designed by kevinAkaSam modified to use only m3 hardware

Pobrania
62
Polubienia
9
Ocena
0
P
Printablesnat3

Klackender Probe with Additional User Parameters

Original design: KlackEnder Probe by KevinAkaSam | Download free STL model | Printables.com When building the probe for my own printer, I discovered that my magnets were a different height than the nominal in the design. I modified the…

Pobrania
59
Polubienia
10
Ocena
0
P
PrintablesAndrew

KevinAkaSam KlackEnder Micro Swiss Direct Drive Probe Mount

Tolerances from KevinAkaSam klack ender is v0.15 h2.0 on this model. Parameters to fit with Micro Swiss DD. This is a remix of KevinAkaSams Klackender Probe that i modified to fit a specific printhead. All tolerances and instructions can…

Pobrania
59
Polubienia
5
Ocena
0

Galaxy Blacker for the spaceman

Gives it a more spacey feel You can resize if you want. I would keep Z height the same though. I hope you enjoy this model DWTC

Pobrania
52
Polubienia
29
Ocena
0
P
PrintablesChadwickTheCrab

KlackEnder Mount for the Manta MK2 Toolhead

Here's a mount for the KlackEnder probe Rev 2 by kevinakasam https://github.com/kevinakasam/KlackEnder-Probe Print with supports and pretty strong (many perimeters and high infill). Options provided for MK8 style or V6 style hotends. For…

Pobrania
51
Polubienia
4
Ocena
5
P
PrintablesDave J

Slacker Bottom Reinforcement Strip for Prusa Faceshield

Here in the UK 0.5mm PETG is becoming difficult to get, but 1mm PETG is still readily available. So here is a remix of the Prusa Bottom Reinforcement which is more suitable for 1mm PETG. Print instructions Same as Prusa Faceshield RC1,…

Pobrania
49
Polubienia
1
Ocena
0
P
PrintablesPushingPixels

Micron 180 Colony Clacker Skirts for R1 Z drives

Thicc skirts for the Micron 180 with a proper Colony Clacker door.

Pobrania
45
Polubienia
17
Ocena
0
P
Printablescalle02

ender 5 klackender

no pictures of it working as its deployed in a no photos area (BOM at the bottom) I remixed and added a few parts like a holder for the mg90 servo and an arm to hold the klackender probe as well as making some adjustments to the holder…

Pobrania
45
Polubienia
8
Ocena
0
P
Printables4kicks

Party popper clacker

Ratchet section is print in one with no supports, I used a 20% infill but probably could do less. Clacker was printed with a 3 wall thickness, or 100% infill if you want. and this can be replaced if it ever wears out. *Please Note * The…

Pobrania
43
Polubienia
73
Ocena
0
P
PrintablesLinkDesigns

Placker Ring - Floss Holder

Print this monstrosity in .2mm resolution and 20-30% infill (a little more weight helps keep it stable). Then fit up to 50 flossing devices into the slots! No supports are needed.

Pobrania
42
Polubienia
10
Ocena
0
P
Printablesprintberg

Sovol SV06 Stealthburner mount with Klackender support

Please see the original model for description regarding the Stealthburner mount. As for the Klackender probe and how to use it, you can find all the instructions here: https://www.printables.com/model/332025-klackender-probe I can not add…

Pobrania
41
Polubienia
11
Ocena
0
P
PrintablesGrom

KlackEnder Probe Mount for "Linear Rail X Axis Mod" with "UniTak3D Ender 3 Direct Drive Upgrade Kit"

Allows for usage of KlackEnder, no other modification required to other STLs. Offset is the same. Cables need to be fed from the “top”, might require usage of tweezers, but it is possible. I made the holes for .15 variant. Either modify…

Pobrania
38
Polubienia
7
Ocena
0
P
PrintablesBrandiLove

clacker toy

this is a toy you swing up and down or back and fourth and the balls will hit together to make a clacking noise I have no idea how it prints if you do print it before I do please come back to comment and let me know how it prints and what…

Pobrania
36
Polubienia
7
Ocena
0
P
Printablescyberal

Colony Clacker corner covers from Micron

Created this mod to keep my Micron style all in sync instead of exposing bare blind joints or using other covers that don't follow the Micron aesthetics.

Pobrania
36
Polubienia
9
Ocena
0
P
PrintablesFresh1492

Lacket (Bracket for Lack Enclosure)

This is the Lacket (Bracket for Lack Enclosure) I designed this to secure my lack enclosure to the wall to prevent it from wobbling as much and increase print quality. This won't be as sturdy as a metal bracket, but now you don't have to…

Pobrania
36
Polubienia
14
Ocena
0
P
PrintablesSilky322

Ender 3 Toolhead for Sherpa Micro, MGN12H, and KlackEnder

Remix of the KlackEnder/Klicky probe carriage to restore the 12H screw pattern. Still kinda messy in the spots where I moved the top holes since I was working off the stl mesh, but prints fine and fits the robotdigg 12H carriage I'm using.

Pobrania
36
Polubienia
7
Ocena
0
P
PrintablesTheNewClarence

Clackers

I used PETG for its higher wear and it's increased mass over PLA. Have not testes with PLA but I would bet they would work well.

Pobrania
35
Polubienia
0
Ocena
0
P
PrintablesBaronMiles

Placker dispenser with ejector, excessively over-engineered version

While it looks and functions really differently than the original, I wouldn't have even started playing with this concept without AxelC's model. I had a version that was completely Print-In-Place (PIP), but to make things easier to tweak…

Pobrania
30
Polubienia
10
Ocena
0
P
PrintablesKy3_actual

Bigger Blacker Box (2016) Partition

Just a simple printable card for the new design of the BBB. This version didn't come with any separators (Or nutritional foam blocks... sadface). It's the same width as the card, and a few millimeters taller. I suggest printing at 30%…

Pobrania
30
Polubienia
2
Ocena
0
P
PrintablesSimon Watts

ToupTek AFW Filter Wheel Blackening rings

The ToupTek AFW filter wheel has screw holes either side to attach tilt plate and OAG via screws. If your using the M54 adaptors to attach to telescope and camera (rather than the screws), then the screw holes are not covered and could…

Pobrania
29
Polubienia
5
Ocena
0
P
PrintablesSnicklefritz

Clacker Fidget Toy / Kids Toy

A little handheld clicker clacker fidget toy. Perfect for kids or adults alike. Test your skills or annoy whoever your sitting beside. How many clacks in a row? How many wrap around clacks in a row? How many butterfly clacks in a row? How…

Pobrania
29
Polubienia
14
Ocena
0
P
Printablesmrusse

Golf Ball Clackers

This is my variant of an old 1960s toy... Clackers! Wikipedia: https://en.wikipedia.org/wiki/Clackers Full instructions / assembly guide. Demonstration You will need: Two golf balls. Shoelaces or paracord 13/64 or similar size drill bit…

Pobrania
26
Polubienia
15
Ocena
5
P
PrintablesFreakOnLeash

KlackEnder for BIQU H2 REVO

Make longer probe mount and some changes in dock. Probe block has original size, i only changed the shape of the eyes

Pobrania
25
Polubienia
4
Ocena
0
P

Blackest Night Nekron

Nekron is the Lord of the Unliving, one of the most powerful forces in the universe, able to summon the dead to serve him towards whatever ends he might seek. Nekron is a physical manifestation of the concept of death as a cosmic…

Pobrania
24
Polubienia
7
Ocena
0
P
PrintablesTimuçin Yaşar

ENDER 3 PRINHEAD -DD - V6 - BMG - DUAL5015 - 4020 - KLACKENDER

My own design for Ender 3 Pro with Klipper. I use KLACKENDER as Z probe and bed mesh. -Direct drive extruder with BMG & E3D V6 combo, NEMA17 Pancake is enough for high speed printing. -Volcano hotend can be used but duct need modifying…

Pobrania
21
Polubienia
7
Ocena
0
P
PrintablesMeAndMyPenguin

KlackEnder Ender 3 v2 Microswiss NG Revo

Remixed kevinakasam's klackender to work with the MicroSwiss NG Revo DD for the ender 3 v2. The probe dock magnet and screw positions had to be adjusted for the lower revo nozzle. The probe mount had to be adjusted to fit the microswiss…

Pobrania
18
Polubienia
3
Ocena
0
P
Printablescyberal

Colony Clacker grippy handle

Inspired by https://www.printables.com/model/629811-a-more-grippy-clicky-clacky-handle, applied the same idea to the ColonyClacker handle

Pobrania
18
Polubienia
4
Ocena
4
P
PrintablesVulychnyi Pes

Klackender probe mount for Sprite Extruder Pro Kit

A tiny remix of the probe mount to fix snugly onto an x-axis plate from the Sprite Extruder Pro Kit which has a weird narrow right side, as well as a bit thinner. Tolerance: v0.15 h0.2 Second image is taken from creality3dofficial.com

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesKakeru

TimeLapse Switch Blacket For Ender 3 / Creality

[Necessary parts] ・Screw M2x12 :2pcs ・Washer M2 :2pcs ・Nut M2 :2pcs ※Locknuts are preferred https://www.amazon.co.jp/dp/B01MXBS4MB/ ・Micro Switch SS-01GL2 https://www.amazon.co.jp/gp/product/B00ECVZ2MO/ ・Cable Tie W2.5mm ・Bolt M4x10 or…

Pobrania
18
Polubienia
4
Ocena
0
P
PrintablesTheZeroBeast

McKENZIELackEnclosure

This is my personal take on the Lack 3D Printer Enclosure, it is constantly evolving but at present is a MK3 MMUv2 enclosure on top and MK2.5 on the bottom. From an initial idea of the cabinet I have faced some hurdles that I have…

Pobrania
16
Polubienia
3
Ocena
0
P
Printableskarnieflk

Klackender V2.2.1 Ender 3 Max Neo Remix (uses 5mm magnets instead of the 6mm magnets in orginal BOM)

I got a max neo, and the original parts do not fit the X gantry, and it would engage when using the max bedplate width so I remixed the parts to make it work. I also stole some design ideas from the V2.2.2Beta, so that I did not have to…

Pobrania
14
Polubienia
4
Ocena
0
P
PrintablesCruisnGrrl

Lid for Cards Against Humanity Bigger Blacker Card Holder

This lid fits over the Cards Against Humanity Bigger Blacker Card Holder keeping the cards from falling out in transport. The Bigger Blacker Card Holder https://www.thingiverse.com/thing:4923233 holds the base deck and 2 expansion packs…

Pobrania
13
Polubienia
5
Ocena
0
P
Printablesnbasse

Braun Oral-B toothbrush head and dental flosser holder (Plackers)

Holder for 4 toothbrush heads and 4 dental flossers (Plackers or other brand). The design includes a drip tray that is removable for easy cleaning. The drip tray also collects any drops of water from the flossers though internal channels.…

Pobrania
13
Polubienia
5
Ocena
0
P
PrintablesEvTheFuture

Toothbrush stand with pocket for toothpicker or placker remover

Toothbrush stand with an extra pocket for a placker remover or a toothpicker Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.4/0.2 Infill: 10% Filament: Generic PLA Any…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablescamelCaseOnly

Waveshare 2.8 fridge door/ colony clacker single piece no MMU

Modified so that the front skirt can be printed in a single piece, same with the back mesh, and then glued together

Pobrania
12
Polubienia
8
Ocena
0
P

Micron+ Stock Z ColonyClacker Multicolor Skirts (No filament change)

This mod allows the Micron+ ColonyClacker skirts to be printed in separate parts and friction fit together. Allowing for a clean multicolor part with no filament changes. Print Settings Standard Voron print settings Parts are designed for…

Pobrania
12
Polubienia
7
Ocena
0
P
PrintablesTheZeroBeast

McKENZIELackEnclosure RasPiCamMount (Cable Snake)

THIS IS PART OF AN OVERALL Lack Enclosure design: https://www.thingiverse.com/thing:3129929 Designed to mount IR Raspberry Pi Cam…

Pobrania
10
Polubienia
2
Ocena
0
P
Printablesimadnyc

Volcano Dock and Mount for KlackEnder for Micro Swiss NG

I couldn't find a volcano adapter for the Micro Swiss NG KlackEnder, so I made one. This was my first foray into FreeCAD, so the models are aesthetically sloppy, but they are functional and I don't feel like cleaning it up. Feel free to…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesChado

Slacker: Chain Slack Measurement Tool

I call it Slacker not that it makes the chain slack but measure. I saw the commercial ones but it's really a simple thing to design. I searched couple of things here in there and I found properly working one from nouc , which works great…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesTema 305

Spinning Clacker – Satisfying Ball Collision Toy

The toy consists of several separate parts that are printed individually and assembled after printing. When the toy is spun and moved, the balls swing and hit each other, creating a satisfying clacking effect. AssemblyPrint all parts…

Pobrania
8
Polubienia
4
Ocena
0
P
Printablesthemadjem

Klackender Ender 2 Pro Probe Mount

A modified mount for the Ender 2 Pro carriage.

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesYbreizh

Ecarteur Enclosure IKEA LACKE

En réalisant mon caisson IKEA LACKE en +80 pour une Ender 3 S1 PRO issue de ce modèle: https://www.printables.com/model/100422-pocket-doors-for-lack-enclosure-v2. J'ai constaté que la face avant avait tendance à se resserrer. Afin de…

Pobrania
6
Polubienia
0
Ocena
0
P
Printablesdriftrotor

V0 Colony Clacker Frame Matcher

V0 Colony Clacker Frame Matcher This simple little addon gives your top hat a little boost to match the hight of the COLONY CLACKER door mod. standard V0.2r1 sits at 348mm tall while the Colony Clacker sits at 350mm tall this mod…

Pobrania
6
Polubienia
6
Ocena
0
P
Printablesturmoni

Klackender 2.2 Beta Probe Dock for Micro Swiss NG

An incredibly basic mod of the stock Klackender 2.2 beta dock to make it work with the Micro Swiss NG dock for 2.1's hotend mount . The 2.1 mount works fine with the rest of 2.2, the big changes are to the probe block and the dock. The…

Pobrania
6
Polubienia
2
Ocena
0
P
PrintablesJking2k11

apt placker

apt plaker

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesBeep Boop

Longer brackets for Colony Clacker

Lowered the brackets 2.5mm to clear the Colony Clacker fridge door mod. Still plenty of room with the taller feet.

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesAdam Storm

V0.2r1 BTT TFT43 Colony Clacker / Mini Fridge Door Mount

Driftrotor's mellow screen mount is a thing of beauty, but the mellow 3.5" screen was nothing but problematic for me. The BTT TFT43 works great on my Trident, and fits decent enough on the v0, there just wasn't a mount for it. I took…

Pobrania
5
Polubienia
6
Ocena
0
P
Printables_V3d_

The Original Snapfinity Clacker

😄 Snapfinity Clacker — Snap it. Clack it. Mix it. Match it. 💥😎 Say hello to the Snapfinity Clacker , the loud‑mouthed little cousin of the Snapfinity Cube. No rotations. No fancy hinge gymnastics. Just pure, satisfying clack‑clack‑clack…

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesMike Yin

KlackEnder Probe PCB Klicky version

PCB Klicky information - https://github.com/tanaes/whopping_Voron_mods/tree/main/pcb_klicky KlackEnder information - https://kevinakasam.com/klack-bom/ Recommended by KevinAkaSam to print in PETG or ABS and not in PLA. The macros for…

Pobrania
4
Polubienia
0
Ocena
0

Smaller Lid for Plackers Floss Case

Lid was too loose, so I scaled down to 98.5% for a better fit. I recommend super gluing the magnet in.

Pobrania
3
Polubienia
3
Ocena
0
P
Printablesjforeman

Clacker v1

Standard issue clicking fidget, however it uses a mechanism similar to a retractable pen instead of a keyboard switch. Printing Instructions: Material: PETG. I haven't tried anything else yet. Layer Height is .12 , I think the smaller the…

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesEHZ_115

M57 "Clacker" Upgraded Magnet Spacers P125BD-N52

This is a spacer that goes in between magnets when replacing old M57 magnets with neodymium magnets. Two are required.…

Pobrania
1
Polubienia
1
Ocena
0
P
Printables

ToupTek AFW Filter Wheel Blackening rings

The ToupTek AFW filter wheel has screw holes either side to attach tilt plate and OAG via screws. If your using the M54 adaptors to attach to telescope and camera (rather than the screws), then the screw holes are not covered and could…

P
Printables

Voron V0.2 Fridge Door / Colony Clacker Stealth Skirts 2.8" Waveshare screen

Voron V0.2 Fridge Door / Colony Clacker Stealth Skirts 2.8" Waveshare screen as the tittle suggests, you are now out of breath reading it… lol but this is the Stealth Skirts option if you want to fit the Waveshare 2.8 inch screen to your…

P
Printables

Klackers (Print in place)

These are klackers or noisemakers that print in place as one part! To have a successful print, you must have good adhesion to the bed. If not use helpers or a brim. For the loudest klackers, more walls and infill the better but watch out…

P
Printables

Sovol SV06 Stealthburner mount with Klackender support

Please see the original model for description regarding the Stealthburner mount. As for the Klackender probe and how to use it, you can find all the instructions here: https://www.printables.com/model/332025-klackender-probe I can not add…