P
Printablesplasmata
Shimano Brake Bleed Block
The neighbor found out I have a 3D printer and asked if I could design him a brake block to do maintenance on his bike.
- Pobrania
- 2097
- Polubienia
- 135
- Ocena
- 4,95
Wyniki wyszukiwania: leed
Liczymy pasujące modele…
P
PrintablesExtrutim
Thin Radiator Bleed Key
A small thin radiator bleed key if like me you have no space to reach the valve with a normal square key. I added a 5mm hole for a keychain. If you like check out my other designs too!
- Pobrania
- 1670
- Polubienia
- 300
- Ocena
- 4,95
P
Printablesntressler7
SRAM Large Bleed Block - For SRAM Code Brakes
This is a replica of the large bleed block that comes in the SRAM bleed kits. It is intended to be used with SRAM Code RSC and SRAM Code R brakes. DB8 compatibility: As reported by @Radek, this bleed block can also be used with SRAM DB8…
- Pobrania
- 1099
- Polubienia
- 50
- Ocena
- 5
P
PrintablesStavros Salampoukidis
Radiator key for bleeding
Radiator Valve key for easy bleeding. Radiators need bleeding when they have air trapped inside them.
- Pobrania
- 997
- Polubienia
- 105
- Ocena
- 4,52
P
PrintablesMarkus S.
Shimano Brake Bleed Funnel
This is a perfectly working version of the bleed cup for Shimano hydraulic MTB brakes. It has the right M5 thread and is a bit bigger than the original, which makes it less likely to overflow. Put some rubber O-rings on the cup and the…
- Pobrania
- 962
- Polubienia
- 92
- Ocena
- 4,5
P
PrintablesSpaghettiFactory
Radiator bleed key
I'm tired of losing my radiator bleed key every time so I decided to make one myself that can be printed within 15 minutes. Ofcourse not as strong as the metal ones, but strong enough to loosen the bleed valve on the radiator. Even when…
- Pobrania
- 936
- Polubienia
- 47
- Ocena
- 5
P
PrintablesThebigfoot
Shimano XT 4 pistons brake bleed block 21 holes
Since was almost impossible to find a bleed block for my Shimano brakes I've checked the measurements of the original one and printed it. Works great! Print and check thickness should be between 10 and 10.2mm to get regular bleeding of…
- Pobrania
- 838
- Polubienia
- 47
- Ocena
- 5
P
PrintablesLuBi Tech
M5 Bleeding Funnel for Shimano Hydraulic Brakes
A M5 bleeding funnel for Shimano hydraulic brakes. Allows you to remove the air from the braking system. I tested it with SHIMANO BR-MT420 brakes. Another tool for bleeding breaks you can find in my models. If you like the model please…
- Pobrania
- 837
- Polubienia
- 101
- Ocena
- 5
P
PrintablesWürth
Würth T-bleed key for Heaters
T-Bleed key for Heaters The Würth Air Bleeder Tool is designed to facilitate the removal of air from the heaters/radiator, which is essential for maintaining heatrer efficiency and preventing potential loss of heating capacity due to…
- Pobrania
- 811
- Polubienia
- 146
- Ocena
- 4,82
P
PrintablesJan Franzke
PET Bottle Brake Bleeder
PET Bottle Cap Adapter to build a brake bleeder as seen on ChrisFix . Prints without supports in under 30 minutes. This is ONLY meant to prevent the tube from sliding in and out of the bottle, not as spill prevention. The cap does not…
- Pobrania
- 789
- Polubienia
- 208
- Ocena
- 5
P
PrintablesFunkyArt
Heater bleeder (Heizungsentlüfter)
It is again the time to throw the heaters on, also the time to bleed the heaters. I have already printed something similar some years ago but unfortunately no longer found therefore I have tinkered a new one. No support needed, just part…
- Pobrania
- 779
- Polubienia
- 180
- Ocena
- 4,83
P
Printablesfifindr
Heater Bleeder
Use 3 walls and tree supports on build plate only for water catcher. A simple tool that makes bleeding radiators cleaner and more convenient by catching the water released from the bleed valve. The design consists of two parts : A…
- Pobrania
- 773
- Polubienia
- 328
- Ocena
- 5
P
PrintablesCorvus
LANKA Overhaul ___ (mods for Leedle's Lanka stringer blaster)
Update --------- LANKA Overhaul Mods for Leedle's cool Lanka stringer blaster. Thanks for making these files free and remixable. Changes made (shown in the pictures in green color): modified the mag retention to use angled Talon mags…
- Pobrania
- 693
- Polubienia
- 207
- Ocena
- 4,83
P
PrintablesDaddyWazzy_TheCreator
Leeds United FC coaster or plaque
Update: added a holder. 1/6/2025 The Peacocks! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. Yellow…
- Pobrania
- 623
- Polubienia
- 11
- Ocena
- 4,83
P
Printablesntressler7
TRP Four Piston Bleed Block
This is a replica of the four piston bleed block that TRP sells. It is intended to be used with TRP DH-R Evo and TRP Trail Evo brakes but may work with Shimano four piston brakes as well since they use the same pads. Printing Instructions…
- Pobrania
- 617
- Polubienia
- 34
- Ocena
- 5
P
PrintablesNusNus
Shimano brake bleed kit cup
This is the cup needed when bleeding Shimano hydraulic bike brakes. The thread might not be the right one. Otherwise the cup is very close to the original one. Print Settings Printer Brand: Anycubic Printer: Photon Rafts: Doesn't Matter…
- Pobrania
- 588
- Polubienia
- 44
- Ocena
- 5
P
PrintablesLWC
Pico 4 external light bleed blocker
UPDATE:03.12.2022 Added a version for people with wider faces as some still experienced to much pressure from the blocker on their heads temple area.…
- Pobrania
- 553
- Polubienia
- 62
- Ocena
- 5
P
PrintablesJackint0sh
Coolant Bleeder Funnel & Plug
Ever thought of bleeding/burping your car's radiator? You should probably do it… I suggest you print this on a more heat resistant filament since your radiator's coolant gets pretty hot. This probably won't work as good as the ones you…
- Pobrania
- 527
- Polubienia
- 42
- Ocena
- 5
P
PrintablesAlex
hydraulic Tektro brake bleed cup
brake bleed cup for hydraulic bike brakes
- Pobrania
- 421
- Polubienia
- 34
- Ocena
- 4,5
P
PrintablesRichard M
Tektro bleed block
Needed to bleed my brakes and discovered I didn't have an appropriate bleed block. So just quickly took a few measurements and printed one.
- Pobrania
- 415
- Polubienia
- 36
- Ocena
- 5
P
PrintablesAndreas Fink
SRAM AXS Road Brake Caliper Piston Cleaning and Bleeding Block
Sometimes caliper pistons get stuck due to dust and dirt. For cleaning you need to push them out. If you do it wrong they fall out and you loose your breaking fluid and need to bleed the whole system. With this design you can push out one…
- Pobrania
- 405
- Polubienia
- 40
- Ocena
- 5
P
PrintablesHisashime
Shimano Bleeding Kit
Looking everywhere for this but to no avail. So I made this. This is a clone version of the Shimano Bleeding Kit. Print instructions 0.15 layer height. Standard Prusa ABS setting.
- Pobrania
- 383
- Polubienia
- 41
- Ocena
- 2
P
Printablesinteractive3
Shimano Road Bike Brake Bleed Block - Hydraulic Disc
I believe this works for Tiagra, 105, Ultegra & Dura Ace - Shimano calipers that use K series brake pads It also works for Altus BR-UR300 calipers - or calipers using B series brake pads.
- Pobrania
- 372
- Polubienia
- 38
- Ocena
- 5
P
PrintablesEvan
XShot Ragefire 120 round extended ammo box, Bruce Leedle Remix
Print facing up, 3 walls, 15% gyroid, supports ideal but not needed. The L and XL need to be printed vertically to fit on the build plate to fit. I'm currently working on the Giga Box which has a goal of 200 rounds with cardboard walls…
- Pobrania
- 364
- Polubienia
- 47
- Ocena
- 5
P
Printablesashpool
Tektro Bleed Thingie
Unlike the Shimano disc brakes, you need these little thingies to attach the brake fluid syringe and top off cup on the Tektro disc brakes. I had no such made these instead. I must say they work pretty well. If you have the Shimano bleed…
- Pobrania
- 333
- Polubienia
- 39
- Ocena
- 4,67
P
PrintablesDaniele
Sram Bleed Block (tested on Guide and Level)
I've also uploaded a version with extra space to allow for releasing one piston at a time, making cleaning and maintenance easier. To extract all four pistons, you'll need to print two of these blocks, one should be mirrored.
- Pobrania
- 326
- Polubienia
- 25
- Ocena
- 5
P
PrintablesLångburken
Reservoir cap for bleeding brakes.
Useful for pressurizing the fluid reservoir, makes bleeding or a complete brake fluid flush a breeze. Main threads should fit most European brands (at least the internet thinks so) but I have tried it successfully with several Volvo's of…
- Pobrania
- 323
- Polubienia
- 18
- Ocena
- 5
P
Printablesrenschler
Shimano road bike disc brake bleed block (openscad)
Remix of PhyMaus's design . I added two grooves and decreased the block width so it could be used with Shimano road disc brakes like the Shimano 105 BR-R7070 calipers. My remix is meant to mimic the Shimano bleed block design - part…
- Pobrania
- 317
- Polubienia
- 19
- Ocena
- 5
P
PrintablesWillis Works
Park Tool BKD-1 Universal Bleed Block
The bleed blocks from the Part Tool BKD-1 kit are great! They aren't for sale individually but I can use calipers ;)
- Pobrania
- 306
- Polubienia
- 43
- Ocena
- 5
P
Printablesjarza
BMW radiator bleeding screw tool
Easy to print with no supports just use brim. Recommend to use PETG for temperature resistance.
- Pobrania
- 294
- Polubienia
- 61
- Ocena
- 4,33
P
PrintablesTomzi1234
Brake fluid cap for brake bleeder
Just a quick design of a brake fluid cap with attachment for a hose, for bleeding brakes. Print Settings Printer: Sapphire Plus Rafts: No Supports: Yes Resolution: 0.2 Infill: 10 Filament: 3d Jake PLA PLA Orange Notes: i printed it upside…
- Pobrania
- 290
- Polubienia
- 29
- Ocena
- 0
P
PrintablesAlex
Entlüftungsschlüssel für Heizungen / Radiator bleed key
Ein Ersatzschlüssel zum Heizung entlüften, falls das Original mal verloren geht.
- Pobrania
- 290
- Polubienia
- 21
- Ocena
- 5
P
PrintablesPouOu
Shimano Bleed Cup (no support) + Clamp
This is a set to bleed shimano hydraulic brakes. Use an o-ring on the cup. The clamp is for holding the hose securely to the caliper I also have one as a version with a flat bottom, which needs support (…
- Pobrania
- 279
- Polubienia
- 41
- Ocena
- 5
P
PrintablesRenārs Vilnis
SRAM Level TLM/Ultimate Bleed blocks /w different widths for better lever feel
Different width Sram Level TLM/Ultimate bleed blocks (part.no. 11.5015.014.090). The bleed block comes with multiple sizes: * 12mm (default) - Use when bleeding brakes which afterwards will use new pads * 11mm - Use when bleeding brakes…
- Pobrania
- 276
- Polubienia
- 19
- Ocena
- 0
P
PrintablesHisashime
Hope Tech Bleed Kit
Print using Prusa default setting of your liking. I printed mine using ABS layer height 2.0, 20% infill, 5 perimeter.
- Pobrania
- 275
- Polubienia
- 23
- Ocena
- 4
P
PrintablesDr Operator
Bleeding light switch overlay
An easy to install overlay for your light switch. The Dual light switch model I used as a template to make the overlay was 130mm wide but the light switch in my home is 117mm wide so I've included both sizes.
- Pobrania
- 248
- Polubienia
- 137
- Ocena
- 5
P
Printablesoohsam
Brake Master Cylinder Bench Bleeder
Bench bleed your master cylinder, connect with 6mm clear hose and pump that pedal yo.
- Pobrania
- 218
- Polubienia
- 12
- Ocena
- 5
P
Printablesflbdesign
Hydraulic Brake Bleed Syringe support holder for bicycle
Holders for bicycle hydraulic brake bleed syringes. The tools hold both syringes upright during a brake bleed, allowing you to have both hands free! Printed in PLA or PETG or other material for the parts and TPU for the rubber bands. I…
- Pobrania
- 205
- Polubienia
- 25
- Ocena
- 5
P
Printablesaiber
Universal hydraulic brake bleed block
I saw this in Park Tool's bleeding video & thought it was neat. I was about to print someone else's Shimano bleed block, but I decided to quickly model this one instead & have it work for every caliper I might encounter. I guessed most of…
- Pobrania
- 203
- Polubienia
- 19
- Ocena
- 0
P
PrintablesKamil Żarnicki
Shimano Bleed Block
A block replacing the brake pads when bleeding the brake. Print it with rather high infill. I've set it to 50% gyroidal and it worked ok.
- Pobrania
- 196
- Polubienia
- 10
- Ocena
- 5
P
PrintablesIxmayer
radiator bleed key (Entlüftungsschlüssel)
Bigger than normal bleed key to make it easier to turn the key.. I used all perimeters and PETG for stiffness.
- Pobrania
- 194
- Polubienia
- 9
- Ocena
- 0
P
PrintablesBroertour
Shimano Road bike hydraulic brake Bleed funnel (M7x0.75 thread)
i was working and a customer brought in his road bike to bleed his brake's. we had the ATB (m5) version but not the road (m7) so i found one online. it works great if you already have the ATB kit from Shimano I used a brim, printed in…
- Pobrania
- 193
- Polubienia
- 18
- Ocena
- 5
P
PrintablesPouOu
Shimano Bleed Cup + Clamp
This is a set for bleed shimano hydraulic brakes. Use an o-ring on the cup. The clamp is for holding the hose securely to the caliper All you need is: syringe hose (I use a hose from a 2-stroke carburetor) Bleed Block (…
- Pobrania
- 191
- Polubienia
- 15
- Ocena
- 0
P
PrintablesChristian
Radiator Bleed Key / Heizungsentlueftung
I needed one for my heating and I always tend to lose them. Now I can just make new ones :) I printed it with 20% infill in PLA, you might want to go up to 100% depending on which material you print with... Print Settings Printer: Anet A8…
- Pobrania
- 185
- Polubienia
- 22
- Ocena
- 5
P
PrintablesBaklin
Sram Level TLM/Ultimate bleed block
This is an old design that I imported from my prints on Thingiverse. I needed a bleed block after shortening the brake hoses on my new bike. This one works a bleed block and piston spreader. It works on the Sram Level TLM and Ultimate…
- Pobrania
- 180
- Polubienia
- 14
- Ocena
- 0
P
PrintablesZymon
Radiator Bleed Key (No Support)
Just a simple radiator bleed key. The size of the square is 5mm.
- Pobrania
- 177
- Polubienia
- 12
- Ocena
- 4,67
P
PrintablesBrooklyn Tony
LDSMM-X: Leedle Dynamics' Stringer Mega Masterkey for the NSK-X
A heavily revised version of the Stringer Mega Masterkey by Bruce LeedleLeedleLeedleLee that is specifically designed and tailor fit to act as an underbarrel attachment for the NSK-X blaster. This has a special grip portion that sits…
- Pobrania
- 175
- Polubienia
- 40
- Ocena
- 0
P
PrintablesDavid Holecko
Shimano Bleeding Spacer Y8J712000 / Y8J712100
Compatible with Shimano Y8J712000 : BR-M9000 BR-M9020 BR-M987 BR-M985 BR-M8000 BR-M785 BR-M7000 BR-M675 BR-M666 BR-RS785 BR-R785 BR-S700 Compatible with Shimano Y8J712100: BR-M6100 BR-M6000 BR-M615 BR-S7000 Name Compatible Y8FZ05000…
- Pobrania
- 173
- Polubienia
- 14
- Ocena
- 5
P
PrintablesChance
Deckhand - 5-dart holder for the LeedleDynamics Corsair
Designed for the LeedleDynamics Corsair ( https://www.etsy.com/listing/1509623188/corsair-break-action-single-shot ), but will likely fit lots of blasters with Picatinny rails. Intended to hold half-darts, but will likely hold most…
- Pobrania
- 169
- Polubienia
- 31
- Ocena
- 5
P
Printablesskvedo
Shimano G01S/G03S bleed spacer
Needed another peace of bleed block for my Shimano SLX brakes (M675) so just printed it. Should fit all brakes using G01S and G03S pads. List bellow found online, tested on M615 BR-M987 - BR-M615 - BR-R515 - BR-M985 - BR-S700 - BR-R315 -…
- Pobrania
- 168
- Polubienia
- 14
- Ocena
- 5
P
PrintablesGrzegorz
Radiator bleed key / Heizungsentlüfter
PLA, Nozzle 0.4, 20% Infill Square 5 x 5 mm
- Pobrania
- 161
- Polubienia
- 10
- Ocena
- 0
P
PrintablesTyler Durden
Car Coolant Funnel Adapter Bleeder
This is an adapter for refilling coolant in a car and afterwards bleed the coolant system for cars that are using the classic coolant cap design. Basic instructions: Using the parts: -Close the passage to the overflow tank using the Plug…
- Pobrania
- 161
- Polubienia
- 9
- Ocena
- 0
P
Printablesmwalbeck
Radiator bleed key
A key to bleed your radiator. The size of the square is 5.25 mm and the diameter of the key is 10 mm.
- Pobrania
- 155
- Polubienia
- 22
- Ocena
- 5
P
PrintablesJanne
Shimano Bleeding Spacer
Spacer for bleeding hydraulic brake hoses. Compatible with Shimano XTR XT SLX RS405 RS505 M8172 M7120
- Pobrania
- 155
- Polubienia
- 15
- Ocena
- 0
P
Printablesbladel
Shimano brake bleed funnel for ST-R8020 ST-R7020
Bleed funnel for newer Shimano brake leveler for use without adapter. Use the original washer. Should fit all M4 brake leveler: Dura Ace ST-R9120 / ST-R9170 Di2 Ultegra ST-R8020 / ST-R8070 Di2 105 ST-R7020 / ST-R7025 Category: Sport &…
- Pobrania
- 151
- Polubienia
- 10
- Ocena
- 5
P
PrintablesJCJ
Shimano 4-Piston Brake Bleed Block
This 3D model is a custom bleed block designed for Shimano 4-piston hydraulic brakes. It’s a practical tool for aligning the caliper during brake bleeding, ensuring precision without hassle. The design emphasizes easy assembly and…
- Pobrania
- 145
- Polubienia
- 9
- Ocena
- 5
P
Printablesvindolin
Thin Radiator Bleed Key Remix
I only added a little tab at the other side of the nut, which makes it easier to remove if it's jammed on the valve.
- Pobrania
- 144
- Polubienia
- 13
- Ocena
- 5
P
Printablessv7kwi
Radiator Bleed Key 5mm
A radiator bleed key 5mm. A useful tool to repair home radiators. The v2 it have 0.1mm tolerance and is recommended.
- Pobrania
- 143
- Polubienia
- 22
- Ocena
- 5
P
Printableswoelpi
SRAM AXS bleed block
My old bleed kit didn't have this new bleed block. So I did make my own one instead of waiting for a online ordered one. It should be compatible with these brakes: This is NOT an official posting by SRAM.
- Pobrania
- 142
- Polubienia
- 9
- Ocena
- 4,5
P
Printableskikkingoff
Air bleeder key - For radiator air purge
You can attach a key ring . The square measures 5.5mm and the round 9.5mm.
- Pobrania
- 137
- Polubienia
- 12
- Ocena
- 5
P
PrintablesW3DSTUDIO
Radiator Bleeding Tool – 3D Printable Key for Heating Systems
This 3D printable Radiator Bleeding Tool is a compact and reliable key designed to release trapped air from radiators, ensuring optimal heating efficiency and comfort in your home. The model is engineered with durability in mind – perfect…
- Pobrania
- 136
- Polubienia
- 23
- Ocena
- 4
P
Printablesjustin thursday
Dragonburner Voron Status LED w/ NO LIGHT BLEED
The original design allows a lot of light bleed on lighter color shrouds. This design moves the LED back and adds a blocker over the diffuser to completely eliminate light bleed. An .stp file of the assembly is included so you can change…
- Pobrania
- 134
- Polubienia
- 30
- Ocena
- 5
P
PrintablesSirHades
Shimano 4 piston Bleed Block
A combined bleed block for 4 piston Shimano brakes. The wide part is the standard Shimano bleed block, without the ears to allow top loading. Use this part to make the quick lever bleed, or before a full bleed. The narrow part is what was…
- Pobrania
- 133
- Polubienia
- 10
- Ocena
- 5
P
Printablesm3dee
Bleeding Syringe Holder for Disc Brake Bikes
Simple syringe holder that holds the syringe on the bike frame or fork during brake bleeding. This keeps your hands free for other tasks. The syringe is hold into place by a rubber band and another one is used to attach the holder to the…
- Pobrania
- 133
- Polubienia
- 18
- Ocena
- 0
P
Printablesalex
Zoom Brake Bleed Funnel M4
Remixed with longer threads from Thingiverse 4327798 to allow the funnel to seal sit deeper and seal the outlet. Works pretty well, but recommend adding a small O-Ring to stop oil from leaking out when pressing the lever
- Pobrania
- 133
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSpiral Architect
Brake Bleeder Cap
My rubber bleeder caps were missing so I made these. They fit over 0.3" brake bleeder fittings (looks like a common size to me). Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: No Supports: No Resolution: .2 Infill: 100…
- Pobrania
- 129
- Polubienia
- 10
- Ocena
- 5
P
PrintablesDiego E.
Bleeding Wrench 7mm for Shimano Brakes
Hi fellows, i didn't had a wrench with 7mm. So i designed one to use it during bleeding the hydraulic brakes (shimano). To open and close it with power i used pliers. During bleeding it is sufficient to use that wrench printed in PLA.
- Pobrania
- 126
- Polubienia
- 12
- Ocena
- 5
P
PrintablesDaniele
Brake Bleed third hand
Introducing a set of invaluable tools designed to streamline the process of bleeding your bike's brake disks! These third hands, specifically tailored for the task, come in different versions to cater to various needs. The H2 variant is…
- Pobrania
- 125
- Polubienia
- 26
- Ocena
- 5
P
PrintablesTamino
Radiator bleeding set/ Heizkörper Entlüftungs Set
I suggest a brim for the bleeding key and higher perimeter. See Cup.3mf for the modifications for a water proof (hopefully) cup.
- Pobrania
- 120
- Polubienia
- 20
- Ocena
- 5
P
PrintablesTHop3D
Radiator bleeding key. Easy to print with keychain hole.
An easy to print radiator key to bleed the air out of radiators. It is made to be used as a keychain. Good thing to have for homeowners or plumbers I advise to use something like ABS on high temperature and print with 100% infill to add…
- Pobrania
- 119
- Polubienia
- 25
- Ocena
- 5
P
Printablesvaprotect
Entlüftungsschlüssel / Bleed Key | 5mm
printed on bambulab p1s with bambu abs 0,2mm nozzle 0,1mm layer stock profile support is not nesessary if you print it upright. you can also print it with 0,4mm nozzle. can also be printed with pla, but i think its not that durable, but i…
- Pobrania
- 117
- Polubienia
- 17
- Ocena
- 5
P
Printablescarrottread
Shimano brake bleed port cap
Print with TPU in vase mode (Spiralize Outer Contour in Cura) with 0.6mm line width (no need for 0.6mm nozzle, 0.4mm nozzle can print up to 0.8mm lines without any issues).
- Pobrania
- 113
- Polubienia
- 16
- Ocena
- 0
P
Printables2cnd
Compressor bleed off muffler 1/4'' NPT muffler
This air compressor muffler was designed for my commercial air compressors automatic dump valve. It turns the sound from startlingly loud to a reasonable hiss. Print in PETG at .2mm set 4-6 Perimeters. Set infill to Gyroid and about 10%…
- Pobrania
- 111
- Polubienia
- 15
- Ocena
- 0
P
PrintablesLeftcetio
Shimano road brake bleed funnel
This is basically the funnel that BleedZone would provide except it is parametric and the dimensions can be changed to match what you want. And it works on road bikes with M7x0.75 thread. The OpenSCAD program is reasonably well documented…
- Pobrania
- 109
- Polubienia
- 7
- Ocena
- 0
P
PrintablesJohn
Brake bleeder nozzle
As you can see on the pictures, i've used it a lot. Works fine for me. I've printed mine with flex on a textured sheet without the need for a brim or support.
- Pobrania
- 108
- Polubienia
- 15
- Ocena
- 0
P
Printablesshtipkov
bleeding syringe support/holder
This is not my idea but I created the models to make them public. I use glue to add rubber from inner tube on the arcs that are in contact with the bar/frame/fork/syringe I use M4 bolt (25mm), Knurled M3-M8 Thumbscrews and M4 inserts. I…
- Pobrania
- 105
- Polubienia
- 6
- Ocena
- 0
P
Printablesklubik 2010
Radiator key/bleeder - Kluczyk do odpowietrzania kaloryfera
Stronger version of this radiator key: https://www.thingiverse.com/thing:6282461 Modification for my needs, works good for me :) For radiators with 50mm square vent closure. No supports needed High infill recommended If you enjoy my…
- Pobrania
- 102
- Polubienia
- 3
- Ocena
- 0
P
PrintablesInducedRug
Master Cylinder Bleed Fitting M12x1
The fitting takes 6mm tubing but the F360 model can be modified to take any tubing. Print with 0.1mm layers, 0.4mm nozzle, supports, and fill the entire model with all walls. (6 walls can work)
- Pobrania
- 96
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDavid Holecko
Shimano Bleeding Spacer Y8FF19000
Compatible with Shimano: BR-M9120 BR-M8120 BR-M8020 BR-M7120 BR-M820 BR-M810 BR-M640 BR-MT520 BR-MT420 Name Compatible Y8FZ05000 Shimano Deore BR-M575 and also: BR-M4050/447/446/445/3050/395/396/355/675, BR-T675/T615 Y8FF19000 Shimano…
- Pobrania
- 94
- Polubienia
- 18
- Ocena
- 5
P
Printables101Predator
Radiator bleed key Longer Handel
Radiator bleed key I Have etended to 65mm(total length)
- Pobrania
- 94
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMcSail
Radiator Bleed Key & Bottle
Prior to owning a printer I always used a filler funnel to bleed radiators. The old funnel broke so I printed a new one in a bit of a hurry ( https://www.printables.com/model/1296317-radiator-bleed-funnel ) in order to get a job done.…
- Pobrania
- 93
- Polubienia
- 14
- Ocena
- 5
P
PrintablesAlex Lesman
Shimano MTB Hydraulic Brake Bleed Kit (MTB M5x0.8 fitting)
This is a cup and plug for bleeding Shimano MTB Hydraulic Brakes with an M5x0.8 fitting. Not to be confused with Shimano road bike fittings which are M7x0.75 thread, see https://www.thingiverse.com/thing:4672692 for an example. Printing…
- Pobrania
- 91
- Polubienia
- 9
- Ocena
- 0
P
PrintablesRene
Avid Juicy Bleed Block
I have not yet tested how well the print holds up under pressure, so maybe a little more walls and more infill for the final version? Dimensionally the part should be pretty much on par with commercial products.
- Pobrania
- 90
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJosh3dPrints
Leeds United Whistle
This is a Leeds United Whistle designed in Tinkercad. Prints without supports
- Pobrania
- 90
- Polubienia
- 2
- Ocena
- 5
P
PrintablesJoerg_H
Radiator bleed key / adjustment key holder
Holder for Radiator Bleed Key / Adjustment Key A simple clip for that little bleed or adjustment key from the heating system that we all seem to misplace 😜 The clip provides a place for the key and simply clips onto a piece of pipe:…
- Pobrania
- 88
- Polubienia
- 35
- Ocena
- 4,5
P
PrintablesDavid Holecko
Shimano Bleeding Spacer Y8FZ05000
Compatible with Shimano Deore BR-M575, as well as BR-M4050, BR-M447, BR-M446, BR-M445, BR-M3050, BR-M395, BR-M396, BR-M355, BR-M675, and BR-T675/BR-T615. Name Compatible Y8FZ05000 Shimano Deore BR-M575 and also:…
- Pobrania
- 85
- Polubienia
- 24
- Ocena
- 0
P
PrintablesJustSomeGuy
M12 x 1 Master Cylinder bench bleed adapter
Remix of model made by @InducedRug_217669 . I shortened the extension off the end of the threads to ensure enough threads can fully engage before contacting the flare, and enlarged and added barbs to the hose adapter. Thicker material on…
- Pobrania
- 84
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMcSail
Radiator Bleed Funnel
A small funnel to facilitate bleeding radiators. I have spent years doing this job with a round funnel that didn't fit between the radiator panel and the wall or between double panels. One day it fell to bits - but now I have a printer so…
- Pobrania
- 83
- Polubienia
- 19
- Ocena
- 0
P
PrintablesShaun577
Brake Bleed Kit Bench Holder
Designed to hold the contents of this kit or similar. I printed in PETG with at least 10% infill.
- Pobrania
- 83
- Polubienia
- 18
- Ocena
- 0
P
PrintablesEnd0skop
Radiator Bleed Key
since I have continuously lost all bleed keys I bought over the years, here a simple yet effective 3D printed alternative. Material & Settings: ABS for good rigidity 0.2mm layers 5 walls / top&bottom layers Infill something about 30-50%…
- Pobrania
- 82
- Polubienia
- 2
- Ocena
- 5
P
PrintablesMartin Majewski
Formula RX Disk Break Bleed Block
Since it was not easy for a friend of mine to find a bleed block for the Formula RX disk brakes here in Germany, I designed and printed one for him. The bleed block is necessary when you bleed your brakes to hold the brake pistons in…
- Pobrania
- 82
- Polubienia
- 11
- Ocena
- 5
P
Printablesjofeinmechaniker
Radiator bleeder key 5mm knurl
Heizkörper Entlüftungs-Schlüssel mit Rändel Die 4kt Vertiefung hat genau 5,05 x 5,05 mm Mit radialer Bohrung für Schlüsselring oder Band. Dies ist eine Neuauflage 2 weitere findet Ihr hier:…
- Pobrania
- 81
- Polubienia
- 12
- Ocena
- 5
P
PrintablesCorvus
ACCURACY Barrel Insert - HUSH 2 by LeedleDynamics
ACCURACY Barrel Insert - for the HUSH 2 by LeedleDynamics This barrel insert reduces the barrel diameter from 16mm to approx. 15mm to get more accuracy out of the Hush 2. And this blaster can be really accurate! The Hush2 has a 16mm…
- Pobrania
- 81
- Polubienia
- 28
- Ocena
- 5
P
Printablesvogo
Shimano Cap for Bleed Bolt
This Shimano bleed bolt cap is used on the vast majority of Shimano hydraulic disc brake systems, both in MTB, City & Touring and Road use. Use FLEX filament
- Pobrania
- 81
- Polubienia
- 16
- Ocena
- 5
P
PrintablesDom's 3d Print Shop
LeedleDynamics Corsair Nerf Ultra Adapter
A barrel insert for the LeedleDynamics Corsair, made to shoot Ultra darts. It prints just like the Elite barrel insert
- Pobrania
- 81
- Polubienia
- 26
- Ocena
- 0
P
PrintablesLord_Vader
Brake Bleeding Adapter VW Beetle / Entlüftungsadapter VW Käfer
English - Bleeding Adapter for VW Beetle and alike (Bus). The threads are G1/4 or R1/4 (German). American sizes wont fit. If printed correctly you can tap the threads you want. It is almost the same as 1/4" - 18 NPT but it wont fit. But…
- Pobrania
- 81
- Polubienia
- 17
- Ocena
- 0
P
PrintablesBrianchenito
Bleed Stop Lanyard Tag
Pause print at appropriate layer height and change filament in order to have dual color labels.
- Pobrania
- 80
- Polubienia
- 31
- Ocena
- 5
P
Printablestuna-fish
Shimano Bleed Port Cover
The stock covers are not a good fit and often fall off, never to be seen again. This is a quick replacement. Recommend printing in TPU.
- Pobrania
- 80
- Polubienia
- 11
- Ocena
- 5
P
Printablesnickb916
TRP DHR EVO Bleed Funnel - M6x1.0
Brake bleed funnel for TRP DHR Evo brakes. Uses a M6x1.0 thread, and is designed to use the stopper that comes with the Park Tool mineral oil kit (I broke my funnel). I attached the Fusion file if you'd like to modify it. I printed this…
- Pobrania
- 79
- Polubienia
- 10
- Ocena
- 0
P
Printablesnickb916
MTB Hydraulic Brake Bleed Syringe Holder
Holders for hydraulic bicycle brake bleed syringes. Print in TPU. Pin should be printed in a strong material, I used PC but PETG should also work. PLA twists too easily. I recommend printing by object instead of by layer. Update…
- Pobrania
- 79
- Polubienia
- 23
- Ocena
- 5