Liczymy pasujące modele…
A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Want a commercial license to sell my prints? Join as a member to my Patreon https://www.patreon.com/c/Salvadori3DArtworks or my Thangs https://thangs.com/designer/Salvadori3D Thrilled to introduce my newest flexi model - this adorable…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Torx screws according to ISO 724 , ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30…
Cute articulated Dachshunds from https://www.thingiverse.com/coyotelc 3 lengths available from short to super long. Print-in-place. If your printer can do fairly decent overhangs, then supports are not necessary. If you like this model,…
Want a commercial license to sell my prints? Join as a member to my Patreon https://www.patreon.com/c/Salvadori3DArtworks or my Thangs https://thangs.com/designer/Salvadori3D Introducing my latest creation—a lovable little pup that’s sure…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of countersunk screws with Phillips drive according to ISO 724 , ranging in sizes from M2.5 to M10, each available in lengths of 10 mm, 16 mm, 20…
Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…
A print in place model of a sausage dog with a keychain loop. Watch the sausage dog dangle from a keyring! The model is connected together with 4 independent parts linked together by a print in place interface. Scale this up or down…
Info: for those who likes it REALLY long more info about print at long millipede print introduced spiral curve, so it can be much longer added also variant for Prusa MINI 200 vertebras print is in the end about 117cm long. Lengths: 200 or…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Hex screws according to ISO, ranging in sizes from M5 to M20, each available in lengths of 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40…
These are lego compatible technic bricks. The models here are only a selection for convenience. All length sizes can be configured on the Perfect Printable Bricks website . If these don't fit quite right with your legos you can fix that…
➡️ Check out also mega long millipede Info: for those who likes it long in original from @Loubie3D (thanks for the model!) is only 1 length of the centipede/millipede/catterprillar (the other is just a scaled variation, with the same 17…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Torx screws with Ribbed Socket head according to ISO 724 , ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm,…
Like the original supplied, my model has an end-stop in the flange to prevent it from falling off due to turning too far. I have completely redesigned this holder, which has allowed me to create different lengths and refine the mesh…
I absolutely love that Josef Prusa includes spare hardware with his products. To date, I have built 3x Prusa MK3 printers, 3x MMU2 units, and then upgraded them all to 'S' which has left me with a ton of various M3 screws. I recently…
A few lengths of simple under-substrate cave that your fish can explore and you can watch them in since this goes against the front glass. Substrates and plants can be put all around it and in the center hollow. Just keep the tunnel…
Print one-offs as needed or use the included batch sets to print either: 20 regular zip ties (~170mm length) 16 long zip ties (~198mm length) 2 longer and 1 longest zip ties (~252mm x2, ~276mm x1) Note: all models and batches assume a…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Knurled Thumb Screws, ranging in sizes from M2.5 to M30, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm, 60 mm, 70 mm,…
These are lego compatible beams. The models here are the most common for convenience. All lengths can be configured on the Perfect Printable Bricks website . If these don't quite fit right with your bricks you can fix that by changing the…
A print in place model of a sausage dog without supports. The model is connected together with 4 independent parts linked together by a print in place interface. Scale this up or down depending on your requirements and imagination! The…
A basic chain intended as a keychain fob but also just fun to play with. Recommended: Print with 6+ walls to give it some weight. It makes it feel much nicer. Make sure your dimensions and elephant-foot compensation are decently tuned.…
These are 40x40mm, 40x20mm and 20x20mm V-Slot Linear Rails. I am working on a project to make a perfect scale model of my Ender 3 Pro, I figured this might be a useful model unto itself. Each rail is uploaded in the following lengths:…
A collection of Headless Hex screws according to ISO 4026 (DIN 913), ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75…
Print 1x handle and 1x shaft, with length of your choice, and glue them in place. Print shaft with a relatively stiff material. PLA, PLA+, PLA-CF, PETG-CF and PC-CF. Do not use PETG, ABS, ASA, and Nylon, they either fail to maintain…
A collection of Headless Slotted screws according to ISO 724 , ranging in sizes from M2 to M12, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75 mm, 80…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A comprehensive collection of Cylindrical / Parallel Dowel Pins according to ISO 2338 , ranging in diameters from M0.8 up to M30 . Each size is available in a…
Articulated slugs from https://www.thingiverse.com/mcsim/designs 3 lengths available from short to super long. Print in place. No supports required. Individual sections are also available for remixes; i.e. head, body, tail. If you like…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Headless Torx screws according to ISO 724 , ranging in sizes from M3 to M16, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25…
Print settings are up to you, there are no special settings needed. They are designed to not require supports if you print with the long part of the body facing up. Print on a textured bed as that surface will be the front of the VF. Each…
BOM: Printed with ROSA3D High Speed PLA Gray Need a quick fix to hang a small picture frame, a thermostat, or a lightweight shelf? These printable expansion anchors are designed for small household tasks. Designed specifically for a 6mm…
These little long badger dogs now complete with shiny glass eyes! :) 3 variations provided. They differ in length. All of them use 6mm glass eyes. Files are named accordingly. I printed all 3 of them without supports. Maybe use a brim if…
Long GoPro thumb screw, for my floating case . A M5 60mm bolt with hex head needs to be inserted. Screw in an M5 nut to pull in the screw all the way. I added later shorter versions also for 30, 40, 50mm bolts. See download files. Print…
Simple yet effective motor wire protectors. The protectors sit on top of your motor wires and are secured to the arm of your quad with two zip ties. This saves weight and allows for easier maintenance than wire protectors which go all…
If printed on edge no support is needed but bed attachment can be a challenge. Eye on top will accommodate a thin cord to allow easy removal and a way to secure the stick into the bag.
I designed these to have 1.6mm walls a multiple of .4mm nozzle size, my printer has no trouble printing .8mm walls on a .4mm nozzle so 2 passes on the walls, your mileage may very. If you cant print them at .8mm walls you can do 4 walls…
Collection of metric bolts, available in sizes from M6 to M16, with multiple lengths. Reinforced by standard wood screw By curiosity I’ve conducted strength tests to evaluate maximum torque and tensile strength, I've tested M10 bolt. Bolt…
I needed be able to disassemble the sword for easy travel. Made going to a con much easier since I only had a carry-on to travel with. The screws are #4-40 x 3/4 in. I found them at Lowe's in a pack with the screw and nut included. The…
A sturdy benchtop/desktop organizer, originally intended for 'standard' zip tie sizes. But I've since printed scaled versions of this for a handful of different desktop organizer needs :) It's far from fancy, but it gets the job done! The…
Simple thumbscrews with ½" long thread. Available ins 3/8-16 and ¼-20. Goes great with my cable lock: https://www.printables.com/model/677490-cable-lock-2-sizes
Pull Handle for M5 screws (different lengths) (heavy duty) Best with PETG or PLA 110mm 120mm 130mm 140mm 150mm 160mm 180mm 200mm
M6 and M8 thumbscrews in various lengths.
After trying many of the several bag clips available to download, none met the requirements I was looking for. Which are: should be able to nicely seal the bags once closed, should not open accidentally decent aesthetics with no sharp…
BOM: Printed with ROSA3D High Speed PLA Gray Mid-project and realized you're out of standard wall plugs? Save yourself a trip to the hardware store! These expansion anchors are designed to hold tight in solid walls and are perfect for…
Print it how you like, I used 40% infill, lines pattern. To use insert the tube partway past the cut line, and cut using a razor blade (to square up the tubing) then insert the tubing all the way to the end stop, and cut. Repeat until you…
5 racks with various lenghts to be used by connecting them together to obtain modular lengths module 3 (pitch 9.42mm) to be optionally used in combination with rack and pinion…
Update: 8 slot rail is now filled. ----------- Scope can't depress far enough? Use 1.5 degree down angled rail. My Zius BK-1S throws darts at 50 m/s (165 fps). At 10 meter range (33 feet) I experienced 20 cm (8 in) freefall drop, which is…
5/8" x 18 tpi (fine thread) hex head bolts. Lengths: 1, 2, 3, 4 inches. I use these for jigs on a BuildPro welding table, as this is the dog hole size. Suitable for other low strength applications. See relateditems at…
Collection of multiboard hooks all using the pegboard click connection. Hooks of various lengths (denoted by long in file name in millimeter) and if desired height (denoted by tall in the file name in millimeters). Two styles - Basic (Red…
Multiboard trays of varying lengths and widths. All numbers are in millimeters unit. Spent a lot of time making it both strong and filament light. I have placed a 10 pound weight on my 200 length by 100 width and it held up fine. Little…
FPV Motor Wire Protectors with Various Lengths Remix without zipties. I prefer using 3M textile tape. Post your makes!
Add a simple tray to your 2020 profiles. Other trays did not have the simple look I wanted and also the easy way to insert it into the profile. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Infill:…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I developed and tested the STRONG and EVEN STRONGER…
Ideal for creating an exhibition wall of 3D printed masks or objects. I created this wall support in various lengths to hang 3D printed masks (Iron Man, Deadpool, etc) or other objects. It should resist +2kg. There are 3 lengths from the…
Hi all, Very simple model, but it will be very useful to people who have bought old broadcast lenses that are missing their zoom stick. Or have lost their zoom stick on a modern lens. Zoom sticks are pretty hard to buy as spare parts. The…
🔆 LED Strip Channel with Slide-in Cover A clean, modular LED strip channel designed for easy wall or surface mounting. The model is available in multiple versions to accommodate various use cases and aesthetic preferences. 📦 Included…
The filter tags can be backed with velcro and be attached to matte boxes etc. These filter tags are useful to see, at a glance, what is in the matte box or what lens is attached to the camera.
djk4linux's air-assist nozzle for the Neje 40W lasers is a bit long for cutting thick materials. So I remixed it for some shorter options. https://www.thingiverse.com/thing:5073015 The original nozzle extends 15mm from the base of the…
Ikea kitchen cabinet baseboards clip with shaft lengths ranging from 10mm to 100mm. Ikea only sells baseboard clips in one size and sometimes larger or smaller sizes a necessary. Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
The Two Trees SP-3 and SP-5 comes with mounting holes near the hotend that allows users to attach a BLTouch sensor. This requires you to print a small bracket to hold the sensor. However, While the BLTouch sensor and clones all seem to…
Easy to print organizer holders. The Universals are for every wall, but the 18mm ones are for 18mm wood plates etc from the local hardware store. I use them to hand / organize my Cables at the Oszilloscope / analyer / multimeter etc. You…
The unique feature of this kaleidocycle is that each unit has a different length. A normal kaleidocycle is made by combining six identical units, but this kaleidocycle can be rotated even though the units are of different lengths.…
Small: 174mm, 6.8in Medium: 204mm, 8in Large: 234mm, 9.2in I printed in TPU 95A, with 5 walls and 50% gyroid infill. Adjust as you like for the right mix of flexibility and strength. Loop the strap around an attachment point and insert…
Golf Tees that are designed to be durable! Printed horizontally for strength. Vertically printed golf tees will break on the layer lines. I wanted to design a horizontally printed tee that was symmetrical. This design uses custom designed…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* This is a raking tool used to help shape the contours…
A simple ruler that was designed to experiment with color change in PrusaSlicer (instant success!). The ruler has indicators for cm (big arrow), half cm (small arrow) and mm (indentations). Additional feature: The ruler dimension starts…
I printed 0.20mm layers and 100% infill. The 20mm pull is a little more tricky to install, but can be flexed hard to fit thru its own loop. Thanks for looking!
These straps are incredibly handy and versatile, perfect for use almost anywhere! The 220mm strap uses only about 3 grams of filament, making each strap very affordable to produce. I have found the best success using low-durometer…
Boxes w/ lids for holding stamp dealer stock cards Fits stock cards that are 107mm wide and up to 70mm high. Examples: https://www.lighthouse.us/single-stamp-dealer-cards-blank-background.html 57.17MM Tall G&K 102BK Cards (These are…
Collection of different target pins for different target materials. Choose between 3 different lengths to fit for loose or tight target materials. Barbs ensure a safe fit of the nail.
I got bored and decided to make my own spider gauges, while these are fairly plentiful in the US, it may be a fun way to make your own tools when working on crosscut saws! I am working on a long jointer and possibly a short jointer/raker…
After the Cartographer CNC mount upgrade, I either needed to move the end stop to the head or make an extension. This is quick and easy. It also gives you an additional 4mm of X travel if desired. 1.25mm offset is the same as the original…
This is a faithful reproduction of the original spool holder used on the Qidi Q2, remodeled from scratch. It includes integrated supports and is available in multiple length variants. Key Features Integrated Internal Support – Lightweight…
A wiggly, satisfying flexi snake that comes off the bed fully assembled, with no supports and no glue. Each joint swings smoothly and can't pop apart. It makes a great desk fidget, stocking stuffer or quick gift, and it's a fun way to…
Added bevel to the edges where straps attach. Some of my PLA prints where breaking at those edges. This solved the issue This SLT includes 4 different lengths 6 straps total for my 200x200 print bed. Print Settings Printer Brand: Wanhao…
Skate guard for blades lengths 16-18 inch, comment on how to improve! BTW I do short track speedskating
A simple but useful tool for marking out seams on fabric. I printed in PETG. I would suggest something that doesn't warp.
This is a mount for 9.5mm wide 5050 SMD LED strips. Push the LED strip in from the end - it is retained without the need for unreliable adhesive. Secure with 2x M3x8mm and t-nuts. 200 and 250mm lengths available
A sleek, highly functional, and sturdy modular kitchen rail system available in 3 distinct length variations to fit any wall layout, cabinet side, or workshop setup. Perfect for hanging cooking utensils, towels, strainers, and kitchen…
The Two Trees SP-3 and SP-5 comes with mounting holes near the hotend that allows users to attach a BLTouch sensor. This requires you to print a small bracket to hold the sensor. However, While the BLTouch sensor and clones all seem to…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Hex screws according to ISO, ranging in sizes from M5 to M20, each available in lengths of 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40…
Cute articulated Dachshunds from https://www.thingiverse.com/coyotelc 3 lengths available from short to super long. Print-in-place. If your printer can do fairly decent overhangs, then supports are not necessary. If you like this model,…
Articulated slugs from https://www.thingiverse.com/mcsim/designs 3 lengths available from short to super long. Print in place. No supports required. Individual sections are also available for remixes; i.e. head, body, tail. If you like…
These little long badger dogs now complete with shiny glass eyes! :) 3 variations provided. They differ in length. All of them use 6mm glass eyes. Files are named accordingly. I printed all 3 of them without supports. Maybe use a brim if…
I got bored and decided to make my own spider gauges, while these are fairly plentiful in the US, it may be a fun way to make your own tools when working on crosscut saws! I am working on a long jointer and possibly a short jointer/raker…
Add a simple tray to your 2020 profiles. Other trays did not have the simple look I wanted and also the easy way to insert it into the profile. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Infill:…
I wanted a simple Utility Hook for my Workshop that is relative strong but easy to print and easy to fasten. printed in elegoo space grey PLA. No Brim 0.2 - 0.28 Layerheight (With 0.4 Nozzle) No Supports 40-50% Infill for strength 3-4…
3D model description The AAP01 is a very nice gun, but if you wish to add a longer barrel there are not any options without a silencer. So I made this one. You can get it in any length you wish (+-5mm) Just DM me after you have bought it…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Modifications of…
Based on some idea's I had in mind created this bag easy bag clip. Designed it is some various sizes so the optimal clip can be selected. I have printed them without supports and they are easy to assemble. It you like them and printed…
DIN top hat rail IEC/EN 60715 This 35 mm wide rail is widely used to mount circuit breakers , relays , programmable logic controllers , motor controllers , and other electrical equipment. The EN 60715 standard specifies both a 7.5 mm…
Hi, i remixed the car phone holder of auroratechchannel for longer lengths since the original is a bit too short for the iphone 14 and my samsung S22 with a case. for these 2 smartphones +5 and +10mm should be good enough but if you have…
This is a simple hook which is rotated by 90°, for my specific orientation of HSW which is rotated to maximize the number of slots in my enclosure space. I got the original idea from the HSW Hook by @Horacio…
These cable ties provide a secure means to tie up your coiled cables. The connection is a snap (closing and opening). Various lengths are available. The part numbers indicate length in millimeters. The most popular length is 40 mm. The…
GoPro compatible connector which enables the use of the gopro linkage system as a holder for any kind of object multiple lengths from 35mm to 200mm in .STL and .STEP available print with 75%+ infill or solid 10+ walls print it laying flat…
i wanted my risers to be smooth so i threw this together you can modify the values in the sketch to change the dimensions of the standoff
All legs are 60mm in diameter and uses M8 screws with hexhead for attachment to the bed. The different leg lengths to choose from are: 60, 80, 100, 120, 140, 160, 180 and 200mm. All files are availible both as STL and STEP. Printing:…
I wanted a simple Utility Hook for my Workshop that is relative strong but easy to print and easy to fasten. printed in elegoo space grey PLA. No Brim 0.2 - 0.28 Layerheight (With 0.4 Nozzle) No Supports 40-50% Infill for strength 3-4…
![#0162 O-O Links Round Split Key Ring - STRONG Enough for Everyday Use! [3 Link Lengths]](https://media.printables.com/media/prints/882188/images/6988608_a5da0081-4a12-44ed-8e48-cdb1b65b0f79_12c23c3f-a767-477a-949f-a2177b32ce9d/20240617_021031.jpg)
