Liczymy pasujące modele…
Designed to print BIG. Scale it down to fit your printer. I printed one at 30% and 55% and tolerances were good. Thanks to jonasrh for the dual color version! Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes…
Christmas Cookie Biscuit Gingerbread Cutter (approx 85 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
Christmas Door Trim Corner - Lollipop🍭🎅 ⛄Ciao sono il pupazzo che vedi nella foto, sarei molto contento se metti un like e scarichi il mio progetto per un grandissimo supporto👍 ⛄Hi I’m the puppet you see in the picture, I would be very…
This set of 3D printed lollipop sticks is designed as a simple, low-filament consumable for general stirring, mixing, and craft work around the workshop or hobby space. The sticks are intentionally basic, making them ideal for epoxy,…
Samhain’s Lollipop from the movie Trick ‘r Treat Approximate Dimensions: 7” x 3.5”
This lollipop holder can be used as a decoration in a children's room or as a toy. The holder can also be used for real lollipops. Enjoy :)
This was my first attempt at a chamber flag. Worked very well and I've printed out many for both myself and friends. Never had an issue releasing the slide down onto the flag. Rounded “lollipop” design reduces snags. This version also has…
Giant Lollipop, created this as I could not find a good modal that fitted the look I wanted. Makes for a good prop for photos or cosplay. I finished my with some sanding to give it a smoother finish.
Print to the size you like, easy to assemble but you need to glue the base with the lollipop_01 part. also glue the lollipop_02 part with lollipop_03. Have fun.
UPDATE: I made the parts stronger so they wont break that easy :) Should be easy to print but you need a good first layer and your flow should be correct. Elephant foots or overextrusion can cause it to jam. If you have trouble with that,…
Can be equipped with small and bigger lollipops as shown on the pics. Perfect decoration for kids birthdays and events. TWO versions available. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15% min.
Melting lollipop pen & pencil holder.
This box holds two ACTIQ lollipops. Actiqs are given to wounded personnel on the battlefield to relieve their pain while waiting for evacuation. The box is designed to keep two Actiq lollipops safe. It has a quick-release buckle and a…
A fun way to display lollipops on your desk or in your home. Makes a great gift for teachers or for offices. Recommend printing with a high infill, I did 40%. No supports needed
Christmas cane lollipop cookie cutter, cutter and marker, size 6,5cm
Not a lot to say about it, other than it holds your antenna. Printed mine using tree supports. Category: R/C Vehicles
Sexy Lollipop kiss wall art
Lollipop stand for full-sized suckers. Holds 10. It does tip over if all the lollipops are on one side. I mainly wanted it for decoration and occasional use, not as a store stand, although it would work as one if you glued a magnet to the…
Easy to make cute Lollipo keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Raw material: TPU95A Esun No supports Print speed 30 mm/s Layer height 0.17
Can be equipped with small and bigger lollipops. Perfect decoration for kids birthdays and events. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15% min.
Don't eat these! they look so yummy, you will be tempted, I guarantee it lol
Filament https://shop.eibos3d.com/collections/eibos-prodect/products/eibos-filament-artism-series-ii?fbclid=IwZXh0bgNhZW0CMTAAAR1jGwWCVaprjqfmr3jTQBp8Z-JPZbHckQF5RN9iN_axgQ97pMWL1NfCtbU_aem_1LyojTwwbm8wL5GcRU3Xkg There are discounts.…
Antenna mount for the Foxeer Lollipop 4 antenna with short tube and UFL connector for the ImpulseRC Micro Apex Frame
The antenna leg is tightly inserted. I widened the hole with a drill.
This is a remix for the walksnail version of the mobula 8. https://makerworld.com/en/models/689978#profileId-618749
For the ears, eyes and mouth a good adhesion is needed - you may want to use some glue.
For the Flyfish Volador VX3 / VX3.5 Single antenna mount lollipop style I have added a mount to hold a GPS unit on the rear, This is for an 18x18 GPS unit ( Im using the TBS m10 unit) Printed in TPU 0.2 layer 15%, I have attached the 3MF…
Here is the Youtube video explaining how I made these:
Printed in PLA with colour changes at 2.0mm and 2.4 mm to get the white/black eyes. Easy to print and does not use a lot of filament. Haven't tried it on a Christmas tree yet as it's only August at the moment I designed and printed this.
I used PETG but anything should work. Tolerance might be a little tight for some printers, if you're worried about that then maybe scale it up a few %. I printed on a MK4 with lightning infill and fit was perfect. My son loves it, hope…
Canopy designed to fit onto toothpick styled frames. It is designed to house the HDZero Nano (14x16mm) with a Foxeer Lollipop v3 antenna. Will also fit other, standard (14x14mm) cameras like the Runcam Nano HD and older analog nanos. The…
This is a special mount for TBS Crossfire Immortal T V2 FOXEER Lollipop 3 AXII antennas for the GEPRC CineLog 25 frame. VTX antenna brand/type doesn't matter; it works for any antenna with a connector up to the size of MMCX90. Two…
A simple mount for the Five33 Switchback holding a Foxeer Micro Lollipop antenna. The antenna is inserted through the slit on the bottom and held in place by fixing it to the frame's standoffs instead of puting it over the top plate as…
Paddle Lollipop is my playful remix of the classic Paddle Move — a well-known magic technique traditionally performed with a rectangular paddle. I redesigned it as a 3D-printed lollipop , making the trick more colorful, fun and…
ring a playful and colorful touch to your 3D printing projects with this unique melted lollipop design! The model is designed for easy printing and comes in two separate files: one for the lollipop and another for the stick, allowing for…
Lollipop is a bold, playful vase design that puts a twist—literally—on the traditional silhouette. Its smooth, spiraling curves swirl upward like a sweet confection, creating a dynamic shape that catches the light beautifully from every…
Wonka inspired and Halloween tested. I thought that this bouquet would be fun if it was fitted to a broom handle to function as a sort of candy scepter. Worked great at truck'er'treat. Tons of fun.
Mounting frame for the Caddx Vista antenna lollipop style. The antenna come with the drone but there's no mounting option for it. You will need two self taping screw or an M2 screw/nut. Total additional weight is 1gr.
Similar design to other Lollipop mounts, created to fit the “Mini 5.8GHz Lollipop 4 Antenna” found on Aliexpress. Includes Fusion360 archive including sketches, if you need to change the standoff distance for a different frame. Antenna…
Just two models smashed together to make a pretty base for lollipops! Made for my mother who wanted something to spruce up her desk at work.
This is a blank for fitting.
I know someone that loves pugs and lollipops. She has a habit of sometimes leaving lollipops in less than ideal spaces when she gets distracted and takes a break from the lollipop. This little friend helps hold unfinished lollipops!
A lollipop-shaped pen holder with a spherical socket for holding a pen or stylus. Its wide melted-style base provides stability on flat surfaces while adding a playful decorative element to a desk.
This is a remix of my original drippy ice cream shifter. This means the design is also made up of multiple parts with tight tolerances to allow the transfer of stresses between parts and increase overall product strength. The design…
Small and compact TPU antenna mount. Compatible with: Foxeer Lollipop micro UFL Walksnail Avatar original antenna Caddx Vista antenna … or any antenna with a UFL connector and up to 12 mm in diameter. Additional stats: Standoff diameter:…
I was tired of my vibrating antenna messing up my tune. I found an existing design by user Provalone3000 . But this was for the O3 system. I just adjusted it to fit single antenna Walksnail systems. So all the props go to the original…
Bring some bold color and stylish curves to your desk with LOLLIPOP , a modern spiral pen holder designed to organize your tools and steal the spotlight ✨🍭 This design is not only decorative but also practical – perfect for pens, markers,…
Antenna mount for the AOS 5 V2 frame (or other AOS frames with 32 mm standoff width). Fits the Foxeer Lollipop 4+ antenna, short tube u.fl version. Print in TPU.
This is a adapter for a lollipop (basicly every antenna with a rod) to mount it on a mount thats made for a sma or rp sma connector. I suggest to glue the adapter into the sma mount even if its fitting perfectly.
Police lollipop light for your kid to play as a policeman or any other idea they have. You can print two red lights or one red and one green. Screw in the lights into the base and its ready to play. The recommended layer height is 0,2mm.
platz für 5 lollipops Magnete helfen gegen ungewolltes kippen
pour l'assemblage final, le collage de pièces
I created a simple stand for 24 lollipops.
A colleague asked me to design her some lollipop earrings for this years carnival. Enjoy!
When getting all the parts for my new Five33 Switchback Zero together I ran into the changed top plate design when compared to the Switchback Pro. The one that comes with the Zero version is wider and therefore the Pro antenna mounts…
an edited version of a lollipop stand I found on Thingiverse. this time, its fixed, and assembles without glue.
This is a sizing blank
Check my profile for coins with shallow relief sculpts of monsters to add into the coin standees / holders. I will also have a selection of full 32mm miniatures form your gaming table. Enjoy. Support me here:…
I've made this to have a better mount for my VTX antenna. The standard one was too short and would bend the cable too much. I'm using a tbs unify pro32 nano with a 20x20 mounting PCB and a Foxeer Lollipop V3 U.FL antenna. Print this with…
The antenna leg is tightly inserted. I widened the hole with a drill.
Printsettings: Nozzle 0,4 No raft no support 100% infill 0,2mm First layer height 0,1mm layer height ironing - off Change Color: First change color: 1.90 cm (Layer 18) Second change color: 2.30 cm (Layer 22)
Please use the tag "sourcetwo" when uploading files to thingiverse.com The idea The SOURCE TWO is a collaborative open source frame project initiated by Team BlackSheep, targeted at FPV racers. It follows the footsteps of SOURCE ONE, a…
I thought the world needed a way of auto-magically generating an 8-bit style 3D rolled cigarette to go along with the very useful Thug Life 8-Bit style glasses. You can either print the parts without doing anything at all or load up this…
Designed by japinaychi (https://www.instagram.com/japinaychi) and fatboy1271 Nozzle 0.4 Layer Height 0.2mm Color Change at Layer 31 MatterHackers * Build PLA Pink HATCHBOX3D * PLA White If you're like me and have a single nozzle,…
This adorable 3D printable baby dragon is ready for a sweet holiday treat! 🍭🐲 This charming fantasy figure is sitting and holding a large swirl lollipop. It's a unique and delightful addition to your Christmas decor, and a perfect gift…
GEPRC Phantom lollipop antenna and rx mount.
Verleihen Sie Ihren Blumen mit der Soliflora LOLLIPOP , einer modernen, spiralförmigen Vase, den Auftritt, den sie verdienen und das mit kräftigen Farben und stylische Kurven . Dieses Design ist nicht nur dekorativ, sondern auch praktisch…
Them Pumpkin spice gals just cant resist… Drag the files into your slicer as one object.. color the pieces as you feel appropriate and then print! Once done, post a make.. otherwise KAREN will wanna speak to your manager..
Print with TPU and support oriented upright.
Español: Hay muchos niños que por su discapacidad no pueden comer un caramelo porque no pueden mantenerlo en la boca, ya que se podrían ahogar, pero tampoco pueden sujetar un caramelo con palo porque son excesivamente dinos. El diseño de…
Just a simple lollipop holder
lollipops holder for the UR5 robot for https://www.printables.com/cs/model/332946-robot-collet-lollipop-holder
Flower with a hole to fit a lollipop in it. Perfect gifts for small children.
This is a antennas mount for a GEPRC Phantom and a Foxeer Lollipop 3 antenna
These stabilization fins are quick to print and easy to hot glue onto the stick end of a lollipop. When shot out of a 2 inch diameter spud gun, the fins will stabilize the lollipop in flight and will vastly improve accuracy. They're…
TBS Source One V5 mount for Foxeer Lollipop 4 antenna and elrs T antenna. Should fit most lollipops with ~17.5mm diameter. Mine is with UF.L soft small cable so it fits through perfectly. rigid SMA style would probably not work here,…
This lollipop holder features three unique versions. The stand provides a stable and stylish way to showcase lollipops, making it ideal for events, dessert tables. Designed for easy 3D printing, the model ensures a secure fit for most…
Supports NOT required. Requires: 2 x M3 nuts 2 x 16mm M3 bolts A lip balm Print the lollipop adapter to fit smaller lollipops (Dum Dum size). The lollipop stick may need to be shortened a bit to fit properly inside. Ergonomic design based…
Cover for stubby lollipop antenna
This is a TPU antenna mount designed to securely hold the Foxeer Lollipop 4 on the Odonata 1.6" frame . The tight layout of this micro frame can make antenna placement tricky — this custom mount provides a clean, firm fit without…
Magicians' tool. A secure lollipop holder for magicians to retrieve a lollipop directly to cigarette palm. Demonstration of 4 different ways to produce a lollipop with it: Designed in Hong Kong. Category: Tool Holders & Boxes
I recently started making candy on my own. This lollipop hand press is very simple and based on the design which I've seen in the below clip (used at 9:52).
Its a lollipop that you can attach to your keys. Supports: Yes Can Print Multiple: Yes
Stay organised and add a touch of fun to your meal tracking with this unique 3D Printed Lollipop Weekly Food Diary ! Designed for those who love to keep their nutrition on point, this diary features 7 individual windows —one for each day…
A simple Elephant as a Valentines Day hand-out, that holds a lollipop (3.5mm~ diameter) in the trunk.
So I felt that I need to have a giant lollipop prop, but didn't want to use glue. So I modified the parts with threads and assembly is straightforward. OpenSCAD source here:…
Halloween decoration: Mummy with lollipop - 20 cm, three colours
A Foxeer Lollipop mount for the TransTEC Frog. Category: R/C Vehicles
Slide in your lollipops. You need to add your own name in modeling software (i used tinkercad cuz its ez)
This is a mount to fit a Foxeer Micro Lollipop Antenna to the Betaflight Meteor75 frame ( NOT 75 pro! ). Just print it in TPU (I used 95A TPU from Overture), without supports the slicer might bicker about floating regions, but that's OK.…
Made a small antenna mount for the Mobula 8, it fits a Foxeer Lollipop 4. It's a small improvment but a worthy one. I printed it with TPU make sure it is layed flat to print.
Kid-friendly design Great for sand, kinetic sand Ready-to-print STL file
This is a remix that combines two wonderful designs, I wanted to have a support for lollipop antenna and for dual receiver antennas in the same support. There are two designes one with antenas that face down & other ones that face up.…
I used this mount with 52mm ( size is important ) Maple Wireless Light 1S 5.8G Circular Polarization Lollipop VTX antenna fromm Ali. It should be printed of TPU A80 (A90 is also fine but harder) with only one support (see picture). The…
