Liczymy pasujące modele…
Includes a 3mm hole for a paracord to be added to the outside and a 2mm hole for venting in case someone opened the cylinder valve for safety. Remade the design by Lucianocunha ( https://www.thingiverse.com/thing:4552099 ) to work with…
Fan shrouds installing the Micro Swiss M2601 Direct Drive Extruder onto a Creality CR-10S Pro V2 or Creality CR-10 Max. The Direct Drive Extruder will work with both the shorter Ender-3 / CR-10 All Metal Hotend as well as the longer…
Come support these models over on Patreon Buy my time, Not my models. Easy to print M26 Pershing, 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. Scale by 1.56 for gaslands /…
The most common style of M26 grenade Lemon used by US forces in many conflicts especially in the vietnam war. Prop is made out of three parts , the fuse body fits in to the grenade body by thread M16x2. Grenade body is hollow so you can…
Na žádost svého kamaráda jsem vytvořil tisknutelnou repliku granátu M26. Je dutý aby šel doplnit pískem na reálnou hmotnost 164 g. Pojistný kolík lze použít kroužek z klíčů + závlačka o průměru 2mm Něco k podpěrám. Tělo tištěno a rozbuška…
ASIAIR mount for CEM26 stock tripod (not literock). Made for my ASIAIR Plus but should work with any similar dovetail. Remixed from the following two models: https://www.thingiverse.com/thing:5235482…
I made this to fit a cigarette lighter power port replacement thing. The nut was needed to help hold it into the slot. It turned out pretty well and seems to hold just fine for what I needed it for.
This is just a variation of my " Dust Cap for DIN Scuba Regulators ", but for regulators with a M26x2 thread for use with gasses with an oxygen content above 21% within the EU. Read this before you print or use it: I do not own such a…
This is a simple microscope objective case I designed to fit Mitutoyo M Plan Apo and similar objectives. There is enough room to house pretty much all 95mm parfocal length objectives and the box is wide enough to fit Excelitas high…
Fan shrouds installing the Micro Swiss M2601 Direct Drive Extruder onto a Creality CR-10S Pro (V1). The Direct Drive Extruder will work with both the shorter Ender-3/CR-10 All Metal Hotend (4-finned) as well as the longer CR-10S Pro All…
This is the handle I designed for removing the cylinder heads from the m260/m264. It will work on some other heads as well. With the large replacement rate of the cylinder heads I made various tools to speed up the job, I suggest printing…
A simple adapter from Canon EOS RF (EOS RP in my case) to a Schneider Robot Xenon 40mm f/1.9 The v2 fixes a lot of these issues: no sanding needed, it's now the proper focal distance added a mark for the dot and a twist lock, the body is…
Fan Shroud Adapters that can be used to attach the stock metal Ender 3 max fan shroud to the M2601 Direct Drive extruder. The PTFE Guide Tube Bracket will align the PTFE tube with the Filament Runout Sensor of the Ender 3 Max.
PTFE tube mounting bracket that comes with the M2601 Direct Drive Extruder.
My setup: Objective: 10X EO M Plan Apo ELWD infinity corrected (M26x36TPI) Tube lens: Carl Zeiss Jena 3.5/135mm (M49x0.75) It covers a full frame with minimal vignetting at full aperture on the tube lens. Printed with PLA, 0.6mm nozzle,…
MegaGRRL - YM2612 VGM Player The MegaGRRL is an ESP32-based, hardware Sega Genesis / MegaDrive VGM player. Using real YM2612 and YM3438 FM chips to play back music from games like Streets of Rage and more. It's designed by Kunoichi Labs,…
Parts: Mantlet and MG port: provide more photorealistic geometries that more closely resemble the real objects Barrels: 6mm barrel pieces are closer to the real-life scale. They are available in 19 and 38mm lengths, depending on what your…
Robot M26 to EOS M adapter. Will fit the old and newer vintage lenses. Printed in Carbon fiber PETG at 0.1 mm layer height and support under the FD mount extensions. Adapter height should be 13 mm. Wet sand with 400 grid if required.
I designed this to leave as much room as possible for the mini pc to cool. As you know, it does get rather warm while imaging. Preferable to print this model with PETG as it is more resilient to both, the atmospheric heat and MiniPC's own…
Another holder for the moonlamp with a M26 thread. Suitable for the 8inch remix model: https://www.thingiverse.com/thing:4930753 Prints without supports
A friend asked me to print and adapter in order to use his Robo M26 lenses with his Sony camera and I didn't found no one. So I made it.
Sometimes it is the small things. This tiny little gear plays a very important role in making a Samsung M2675F Mono Laser Printer work. It is also bravely resistant to all attempts to glue or otherwise repair it when it breaks in half. In…
M26 Threaded End Cap for Water Tap A functional threaded end cap designed to seal M26 water tap connections. Perfect for temporarily or permanently closing unused tap outlets, preventing leaks during maintenance, or protecting threads…
Gas cap broke so I made a new one, its designed to be as close to the original as possible and uses the same gasket. I was worried that the Elegoo PETG PRO (Burgundy red translucent) wouldn't hold up against 2-stroke mixed gas but its…
I lost the top clip for my suunto console. So I designed a new one, it is not like the original one but it fits very well and does its job. Zoop, Cobra, Vyper, SM26, SM36
Lüftungsgitter für den multicar m26
After I have installed my studio monitors on the K&M26754 stands I did not like the way the cables were dangling in the back. So I designed this clamps to keep the cables neat and slick along the stem pipe. Don't print them in PLA as it…
thread 11mm side im making like m8 nut for wench 11mm only long 10mm step file include UPDATE Added v2
Robot M26 to EOS M adapter. Will fit the old and newer vintage lenses. Printed in Carbon fiber PETG at 0.1 mm layer height and support under the FD mount extensions. Adapter height should be 13 mm. Wet sand with 400 grid if required.…
Knöpfe für die Heizungseinstellung des Multicar M26 Gedruckt aus ABS mit 0,2mm Layer
Spiegelhalter für den M26 Gedruckt aus Abs mit 0.2mm Layer und 20% infill
Hello, I have measured and then constructed the original part for a colleague. It replaces the defective original part of the SARO EM26 / EM40 ice cube machine, which had broken due to material fatigue. My colleague has installed it and…
This is a somewhat sketchy apparatus to add an IO panel to your iOptron CEM26 mount, similar to what we have on the larger models of the series. It takes advantage of the existing hollow tube assembly to pass cables inside of it and avoid…
Multicar M26 Mittelkonsolenfach
The M26 Pershing was an American heavy tank developed during World War II. Designed to replace earlier medium tanks, it featured strong armor, improved mobility, and a powerful 90 mm gun, making it one of the most capable Allied armored…
This is a M26 Pershing keychain, Perfect for a War Thunder player.
engine timing tool for setting cam timing the main holders can be printed from almost anything, although I recommend printing them solid when not using a reinforced filament there is .5mm left on the bottom of them for tuning, While most…
A simple rear cap for the lenses for the earlier Berning Robot models (Robot IIa, Robot Star, Junior, ....) that have a regular thread. Probably won't work with the interrupted screw thread of the later Robot Royal. Printed on my Q1 Pro…
This design is a specific need I had to equip the 1/6th scale M26 Pershing tank produced by the company Armortek in the UK. Originally, the hatches on the M26 Pershing tank provided access to the interior, and I thought it would be useful…
A simple screw-in lens cap for Kodak Signet 35, to protect the excellent 44mm f/3.5 Kodak Ektar Lens. Available in 3 functionally identical variants: - Plain - with Period Correct logo - with Classic EKC logo Thread spec is M26.5x0.75…
Makeshift replacement for Makita Part DA00000156, which is not available in my country anymore. I printed mine in TPU 95A since it's the best material for layer adhesion, temperature resistance and shatter resistance I have. CHECK THAT…
This design fits perfectly into the rihgt-hand hatch of the 1/6 scale Armortek Tank. This allows for the following to be located in the same place: The main switch The switch for the smoke generator module The battery voltage indicator…
This design is a specific need I had to equip the 1/6th scale M26 Pershing tank produced by the company Armortek in the UK. This plate allows the tank commander's bust to be fixed in place. It is fixed from the interior of the turret with…
Case for the Spacemit K3 CoM260 developer board. This has almost the same form factor as the Jetson Orin Nano dev board: the only difference is a larger heatsink on the CoM260. I recommend printing the main body upside down, with supports…
Dimensions are correct but model can be a bit too big depending on printer Recommend printing at 98%
Makeshift replacement for Makita Part DA00000156, which is not available in my country anymore. I printed mine in TPU 95A since it's the best material for layer adhesion, temperature resistance and shatter resistance I have. CHECK THAT…
This design fits perfectly into the rihgt-hand hatch of the 1/6 scale Armortek Tank. This allows for the following to be located in the same place: The main switch The switch for the smoke generator module The battery voltage indicator…
This design is a specific need I had to equip the 1/6th scale M26 Pershing tank produced by the company Armortek in the UK. Originally, the hatches on the M26 Pershing tank provided access to the interior, and I thought it would be useful…
This design is a specific need I had to equip the 1/6th scale M26 Pershing tank produced by the company Armortek in the UK. This plate allows the tank commander's bust to be fixed in place. It is fixed from the interior of the turret with…
Dimensions are correct but model can be a bit too big depending on printer Recommend printing at 98%
Závit se mi nepodařilo v ISO nalézt, tak jsem si pro Fusion vytvořil spešl M26x2,05 Vymodeloval jsem odkapávací konec aby se voda po trubce nevracela.
engine timing tool for setting cam timing the main holders can be printed from almost anything, although I recommend printing them solid when not using a reinforced filament there is .5mm left on the bottom of them for tuning, While most…
This is a stand for the Kenwood TM261A amateur radio. It elevates the radio a little bit for better airflow across the heat sink and keeps it from scratching surfaces as well.
I made this to mount a travel router to my telescope rig.
I designed these legs for the Unico ULM26 26 LCD arcade monitor. This monitor is designed to go inside of a arcade cabinet. However if you want to use this on a desk or table, it has no way of supporting itself, so I designed these…
PTFE tube mounting bracket that comes with the M2602 Direct Drive Extruder.
![M2601 CR-10S Pro V2 / CR-10 Max [Micro Swiss Direct Drive Extruder] - Fan Shrouds](https://media.printables.com/media/prints/698885/images/5548157_c7549b92-7fcb-44ea-9ad1-861608b9eaeb_57d87105-28a0-4e7f-aad3-ed996f07f4f7/image2.jpg)
![M2601 CR-10S Pro [Micro Swiss Direct Drive Extruder] - Fan Shrouds](https://media.printables.com/media/prints/698867/images/5488428_cf6040e2-edf1-42df-a822-2df0fbd212bb_dcaf0d21-3a00-4c2d-8acc-0617717dbed8/image1.png)
![M2601 Ender-3 Max [Micro Swiss Direct Drive] - Fan Shroud Adapters](https://media.printables.com/media/prints/698905/images/5488575_b3ec441a-fa86-441d-8a5c-c6693dce5f9f_a793c57e-37b8-4077-901f-6ce7f3daed4b/fan-shroud-adapter-render-1.png)
![M2601 Ender-3 / CR-10 [Micro Swiss Direct Drive] PTFE Bracket](https://media.printables.com/media/prints/698895/images/5548106_4bd8e09f-8934-414e-a68b-3321cb85ff51_6909f607-816b-4933-b737-e3a507dc1cfc/image1.jpg)
![M2602 Ender-5 [Micro Swiss Direct Drive] PTFE Bracket](https://media.printables.com/media/prints/703901/images/5523594_b9c3a119-f7da-47d9-bfe4-c17f774f4d9c_06a61f1c-bfc5-4f4b-ba60-51ef7cca000a/image1.jpg)
