Liczymy pasujące modele…
Instruction Simply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Updates March 23, 2024 Added an alternative knob for thin cloth or sandpaper.…
(Yet Another) SD/microSD card case with the rough XY dimensions of a credit card or Raspberry Pi Print instructions Added a tray with 1 SD and 7 microSD slots. It's not as well-tested as the 2SD/5uSD tray; the uSD slots might be tighter.…
In order to find the perfect fit for your setup, just print a bunch of these with different scaling in Y/X-direction (+/- 10 %). MicroMax Standard The card is recessed by 6 mm and will fit every typical card slot. I tested these with my…
A box/holder for your SD cards! It holds up to 12 microSD cards and 3 full-size SD cards. It also has an integrated lid connected via a print-in-place linkage, which latches securely shut to ensure your SD cards won't fall out on the go.…
Remix from the awesome print in place "Hinged Sd & Micro SD Card Box - 16 Slots - All In One Piece by 8u9o" https://www.thingiverse.com/thing:3611322 Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution:…
Holds: 10 MicroSD Cards 6 Standard SD Cards 6 USB(A) Memory Sticks
This is a micro-SD card holder for 18 micro-SD cards. A save place for a lot of data ;-) It is a smaller version of my popular SD-card holder: https://www.printables.com/model/69096-sd-card-case After printing you should screw the jar and…
Holder for Micro SD Card Holders. The last edition relied on a friction fit which led to issues on other printers. This time I have completely redesigned the model from the ground up to use springs instead. This means that the tolerances…
3D Model made for CAD. STEP/STP and STL provided. Model completely designed by me.
I liked the remix from ANBAL534 ( https://www.printables.com/model/207028-steam-deck-carrying-case-insert-for-eu-plugs-europ) but missed the option to use the case as a stand as well. Besides that I don't use full SD cards, I opted in…
MODEL DETAILS Please refer to this upgrade guide . Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro Update: Check out our new Revo Prusa Mini Edition kit for a simplified upgrade - No firmware changes are required to complete…
I was looking for a place to store my micro SD cards + adapter and came across the design of "bgill". Unfortunately only for micro sd cards without adapter. So I made a remix based on bgill's design.…
UPDATE: Requested new variant added (SD Card Slide Holder 5X1+SIM) with SIM removal tool and SIM card adapter. This Micro SD card / SD card holder holds a multitude of cards in a thin light and secure package, with a small detent that…
Elevate your recording and gaming setup with my Customizable 3D printable microphone arm with adjustable joints and easy assembly for improved gaming and audio setups. Adjustable The joints can be adjusted in 10 degree intervals where…
BACKGROUND: The QMX , (tr)uSDX and Elecraft KX2 and KX3 are fantastic portable radios, but the microphone for the KX2/KX3 is relatively big and heavy, and there really is no good mic option for the (tr)uSDX. So, I decided to design one.…
Micro Disc Shooter This is a travel prefect, print-in-place micro disc shooter. It measures about 5 × 3 cm (2 × 1.2 in). With the disc clipped in place, it slips easily into your bag—always ready for a quick game or a fun challenge. How…
Designed with the support and contributions of the “Recreator 3D” Discord community. This design uses a router bit as the main cuter. Has support bearings on both ends of the cutter for added support and tool longevity. Uses a small cheap…
Credit card sized SD and microSD card holder. 15 Jan 2021 update added SD only and microSD only holders added stackable versions of all holders 24 Jan 2021 update minor design tweaks 3mf file added
A stylish pen holder inspired by the design of a V8 car engine block. The EngineBlock Holder is both functional and visually striking, making it the perfect accessory for tech enthusiasts and car lovers alike. Ideal for your desk or…
As small as I could go with functional, working ball joints. Fused the armor and frames together except for the interconnecting, moveable joints. 0.12mm layer 2 walls, 50% infill Auto tree support, build plate, critical Print time <45min…
I finally tried out my 0.2mm nozzle and made a fidget ring for it. This one is all-day wearable just like a normal ring - at least I found it to be; it does have quite some thickness, and you might find that still comfortable or not. If…
| BASIC DESCRIPTION | it is a remix of a model found here: https://www.printables.com/model/20415-sdmicrosd-card-case https://www.printables.com/model/23326-sdmicrosd-card-case-snap-fit this remix has 8 slots for microSD, and one for the…
The Microbot Fidget is based on Hiro's Microbot from Big Hero 6 Both the parts snap fit together. Print details: Material Used : Prusament PLA Prusa Galaxy Black Layer height: 0.15mm Supports: N o Brim: Yes (Only for vertically printed…
This holder can hold up to: 14 USB-Sticks 5 USB-Stick Lids 8 SD-Cards 10 Micro-SD-Cards 6 USB-C Adpater (Micro USB to USB-C) Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 15%…
This is a remix of a 1U rack mount solution for Dell Micro computers that keeps both computers the same orientation. It should work for all variations of the Dell Micro computer (if in doubt, the computer measurements are 182mm on the…
Compact MicroSD Card Holder for 3D Printing Keep your microSD cards organized and secure with this sleek and compact storage box, designed specifically for 3D printing enthusiasts. The minimalist design ensures it fits effortlessly in…
This is basically what Zack mentioned in the video. I attached the Fusion360 file so you can go nuts with it. This upload contais a 1x3 and 1x2 Model. Update 2023-01-04: Added versions without the magnetholes in the bottom, because its…
This is designed specifically for a Dell Optiplex 7060 MicroPC, though it may be possible that some similar era Dell micros may fit in here too (the model in picture has an i7-8700 for a hint of its age). As you can see, I got a little…
A small (about UNO cards stack sized) dice tower with dice tray included. Both parts print without supports and use about 70 grams of filament. HIGH ROLLS GUARANTEED* The tower can fit a whole set of standard dice for storage. Put on the…
this isn't mine and this is my first reupload so if I have broken rules or etiquette please let me know :) I just wanted to reshare to get the hang of it and honor this great print that I'm yet to print in marble sadly. everything is the…
This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…
A case for up to 32 memory cards.
18/08/2022 step file uploaded New face fan cover 13/05/2022 V6/ REVO V6 heat set inserts added 1 st Big Thanks to EVA designer for this big effort and nice design for EVA 3.0 Link to EVA 3.0 HERE ! 2 version Standard E3D V6 / REVO V6…
Kids love to sing and these toy microphones can add to the fun. Another optional for use is the tried and true "whomever holds the microphone gets to speak, while others listen". And of course, there's always the classic "drop the mic"…
This was inspired by Zack Freedman's Gridfinity project. My take on a Micro SD card holder for Gridfinity. I created using Onshape . Added step file for easy changes.
This Micro SD card box has space for the supplied adapter and is a remix. Left is the Original and right ist mine remix. The left-hand corner of the lid has been widened to make it easier to open the box. Print Settings: You need to use…
I created a USB, SD card and Micro SD card storage holder for my Honeycomb storge wall. I recently made a version 2 of the stl file. I made a couple of changes to the SD card opening so the cards would fit better. I also made the depth of…
Version 2 is here! Meet the Microlab —a super compact, fully 3D-printable homelab that’s perfect for self-hosted tinkerers who love big ideas but small footprints. At just 5 inches wide and a tiny 160x160mm base, it’s even smaller than a…
I made this case to hold 11 full-size SD cards and 8 micro SD cards in a small, rugged case that uses less than 50 grams of plastic total. I added knurling and grip to both parts to make opening and closing easy. I recommend alternating…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Compatible with: Extruder : SKU M3201 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers SKU M3203 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Linear Rail Edition) Hotend:…
Ein Mikrofon mit Ständer und abschraubbarem Kopf zum Verschenken von Eventgutscheinen. A microphone with stand and unscrewable head for giving away event vouchers. Print instructions Gedruckt in PLA mit 0,2mm Schichtstärke. Länge: ca.…
This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…
Tested on 3 different cards and 3 different phones. Note: The thinnest part has 0.8mm, consider this to adjust nozzle and line width.
external micro antenna mount for uconsole
About the F-16 Fighting Falcon The F-16 is an american single-engine supersonic multirole fighter developed by General Dynamics for the US Air Force. It was designed as an air superoirity day fighter, but evolved into a succesful…
How easy is it to loose micro SD cards? Here is a simple, screw top, micro SD card holder which can hold up to 24 cards. This is a re-design is inspired from bgill's micro-SD cardholder, adding a circular arranged slots, textured grips on…
Micro:bit case for the second version of the board Supports the new features of the card: - microphone - speaker - Touch logo Remixed from https://www.thingiverse.com/thing:3028078 and https://www.thingiverse.com/thing:3511591
For easy branching and connecting of the 4.6 mm Supply Pipe or 4.6 mm Drip Irrigation Line. ------ I printed with these settings: Resolution: 0.15 Supports: Yes Infill: 20% Rafts: Skirt Filament: PolyMaker PolyLite PLA Pro Grey
This Dell Optiplex Mount is a versatile and compact solution designed to securely mount a Dell Optiplex 340M Desktop Computer to a 19" server rack. its design only takes up 1U of rackspace and allows you to mount 2 of them next to…
This stand/holder contains 4 different slots: 3x SD-Card 6x Micro-SD 9x USB-A 12x USB-C Print Settings: Matte PLA 210 degree print temp 60 degree bed temp 0.4 Nozzle 0.12mm Layer Height
This is a Skadis Holder for the Wera Kraftform Micro Screwdriver with 6 Slots. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg (you need to print 2 Hooks). As shown in the Pictures the Holders can be…
As seen on X and YouTube: Designed for use with the Tang Band W3-1876 woofer, and the GRS A25-2T tweeter. Usable overall bandwidth of 50Hz - 16kHz in the nearfield; ideally against a wall. Tang Band W3-1876S 3" Subwoofer:…
Source code (designed in SolveSpace): https://github.com/nazar-pc/matx-open-test-bench It only has motherboard tray and support for 4 expansion cards. No I/O shield or anything else, has cut-out on the back for easier cooler and back SSD…
I designed this DNA-shaped growing tower for my students. It is a multipurpose, modular growing system that can be used to grow microgreens or as a decorative planter that brings more greenery into a living space. I particularly like the…
Currently refining a small obstacle avoiding mecanum robot for an introductory robotics club and needed a simple mount for a servo driven ultrasonic sensor. This design is a single piece print with no supports that printed quickly in PLA+…
Micro Mlok Handstop Uses standard mlok hardware Or as LayersForLife, LLC commented M4x12 or an M5x12 will also work if you are making your own mlok hardware. Category: Other
This is a low-profile microphone arm that swivels underneath a monitor to save space. I've been using this for over 3 months, and it's been rock-solid. Fully 3D printed with no supports! All printed hardware can be swapped with M10 x 30mm…
This is a SIM card adapter that adapts Micro-SIM cards to Mini-SIM cards. This model is a remix of Jeřabina s adapter. It has tighter tolerances and thus may fit your card better. Therefore I also matched his license of this file. Print…
EDC Micro Series. Compatible with each other. See also: EDC Micro Pill Capsule - Keychain EDC Micro Screwdriver EDC Micro Tools I EDC Micro Tools II EDC Series Box Inspired by an idea Michel Bauer - Exacto knife keychain. Completely…
Hello, this is a two-piece coin that can hold a micro SD card. It has the dimensions of a 1 Euro coin (approx. Ø23.5 x 2.3 mm) and can be kept in your wallet or used on a keychain or necklace. For the last to options, it has a hole with a…
This is a 100% 3D printed phone holder for microscopes, designed to make capturing images and videos simple and precise. The mount allows smooth adjustment left, right, up, down, and forward and backward relative to the microscope lens,…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Just a very simple SD and micro SD card holder that fits into a 1x2 gridfinity slot. Space for 10 SD and 16 micro SD cards. Added 13.09.24 - SD cards only - 15 SD cards.
IF YOU DOWNLOAD THIS MODEL, PLEASE TAKE 1 SECOND TO RATE OR LIKE IT… THAT IS ALL I ASK IN RETURN, THANK YOU. In this video I will show you how to install an all metal hotend kit on the Creality CR-10 Smart 3D printer. Currently, there are…
Micro SD Card Wallet Holds 16 Micro SDs and 1 standard SD card. The tray contains the clipped in cards covered by a sliding lid. Dimensions: 58 x 99 x 4 mm Printing recommandations PLA 0.3 mm layer height 4 perimeters, arachne mode is not…
To be honest I've never really made lures before, I've modified spinners a bit and tied crappy looking flies before but seeing Marling Baits on youtube make the tiniest crankbait, inspired me to make a tiny crankbait of my own. I present…
It is difficult to open the case, perhaps the locking protrusion should be made 0.4 mm rather than 0.5 mm. The cards come in tight, they do not fall out of the case as in other models. In the photos, the model is printed from PETG, the…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
I wanted a Ridge Wallet but it was too expensive for my cheap self. So I made one using resin on an Anycubic Photo. Used 2 rubber bands I found for my hair around 4-5 cm in diameter and of 3-5 mm thickness. Please find the .f3d and .3mf…
Just use a piece of filament to attach the hinge and latch. The filament needs to be about 2 mm longer on every side. Then use a lighter and make it warm and push it flat.
Found this made by someone in a facebook group, no stls so here you go. edit: as some people have mentioned, some parts are not to scale, please scale the tiny parts by 1000% This took me a while to put together so please feel free to…
About the F/A-18 Super Hornet The Boeing F/A-18E and F/A-18F Super Hornet are a series of American supersonic twin-engine, carrier-capable, multirole fighter aircraft derived from the the McDonnell Douglas F/A-18 Hornet . The Super Hornet…
This 3D-printed mount is designed for Dell OptiPlex Micro PCs with the following dimensions: Depth: 178 mm Height: 182 mm Width: 36 mm This should cover most, if not all, of the OptiPlex Micro Models. I designed & tested it on a 7000…
This is a scaled flyable micro version of the ASW20 sailplane from Schleicher. The model was created to be lightweight and printable in normal PLA. Because of it's lightweight behaviour it's a little bit fiddly to get it together properly…
Nintendo Switch Kickstand / MicroSD cover (Improved)
Use it as props, award or a simple decoration. For other half load one more model aside and miror it. Glue after its done. Print flat side down, no support, lightning infill for faster printing and material saving.
A rack for a Micro-ATX board. Perfect fit for my Asus B550m motherboard. Since I had a little trouble to find the exact measurements for the holes, a table with these and a DXF with the holes are included. Measurements both in Inch and…
VW T1 Bus Pickup Pen / Desk Organizer USB SD microsd
How about using the popular micro:bit to make a Otto robot? this is how this robot came to life combining to great platforms and adding more articulations to create a new member of the Otto family. This a remix of the original Otto robot…
The Microjig Matchfit system is endlessly useful for custom jigs, storage, organization, etc, but the bits and knobs are on the expensive side. I modeled and tested a number of variations to land on these, which are fully compatible with…
I made this mounting plate for a micro servo because my 9G servos didn't have the disc mount which was used in this robot arm model ( http://www.thingiverse.com/thing:1684471 ) It fits my "Tower Pro" SG90 micro servos, which have 20 tiny…
Hey all! This is my custom Microphone stand I designed as I bought a microphone that came without a boom or a stand. It should fit most standard shock mounts (refer to the second picture). Do print with a fairly high infill for strength,…
March 05, 2021 This is a stackable box with drawers for SD and micro SD cards, optional with a USB stick holder as top plate. You can stack together as many drawer modules as needed to create the complete box.…
Holds: 7 (+ 4) MicroSD Cards 4 Standard SD Cards up to 9 USB-A Memory Sticks depending on size 90 degrees, angled or mixed configuration Added files for another version that also supporting USB-C this second version holds: 7 (+ 4) MicroSD…
Gamer case for your BBC Micro Bit Features: Easy to print Easy to handle Allows access to all the board features You can attach the battery box in the back. https://www.prusaprinters.org/prints/20132-case-for-bbc-microbit Print…
Redesign of a simple micro SD card organizer, based on the original MicroSD Card holder by FritoBandito. Created a new model in Autodesk Fusion 360. Redesigned the slots for easier card removal. Print with 0.2mm layer height
Design Background: I needed a USB hub for 10 USB drives, 5 SD cards and about 10 Micro SD cards. I searched for one that fit my needs but couldn't find a perfect one. The designs online either had excess number of slots or had a shortage…
When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…
Estuche para guardar tus tarjetas micro SD y que no se te pierdan.
This project is a custom-built foldable long-range FPV drone designed for efficient, extended flight times of up to 18 minutes. The frame is entirely 3D-printed and incorporates a unique folding mechanism for easy portability. The drone…
Edit 9/25/2023: Per the comments, I have revised the micro SD slot to not be so tight, but snug enough to hold the sd card. Additionally, the slot will now only allow the micro SD card to go into it half-way, making it easier to pull out.…
Durable and practical storage case for MicroSD cards and adapters This rugged MicroSD card case is designed to keep your storage media organized and protected from dust and sand . It is ideal for safely transporting or storing MicroSD…
Micro Reverse Compound Crossbow Really fun for shooting on a magnetic dart plate. The parts are printed in PLA and PETG at 0.2mm layer height. Additional Hardware: 2 mm wire (I used a 2mm stainless steel tig welding rod) magnet D:6mm…
Various connectors and an end piece for the 1/2" - 13mm Micro-Drip water pipes from Gardena. Depending on your water pressure you might need a hose clamp to secure it properly. If you want to connect your micro drip system to a garden…
Background There are several 10" rack mounts for these TinyMiniMicro PC's, but none of them quite sat right with me. My goals for this were the following: Conform to the un-official 10" rack dimensions seen here (254mm x 44.45mm). PC Is…
About the F-35 Lightning II The Lockheed Martin F-35 Lightning II is an American family of single-seat, single-engine, supersonic stealth strike fighters. A multirole combat aircraft designed for both air superiority and strike missions,…
MicroSD Card Wallet by aerobatflyer is licensed under the Creative Commons - Attribution - Non-Commercial license.
MODEL DETAILS Edition 2, which uses the original Prusa Mini fan can be found here . If using this version (Edition 1), please read this upgrade guide before printing the parts: Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro…
I didn't find a Gridfinity Micro SD and SD holder that suited my needs, so I designed my own. It holds 4 SD and 6 Micro SD cards and is 1x1 bin big. The model doesn't have magnets or screw holes as I don't use them and it makes printing…
![Display Stand for LEGO Star Wars Microfighters and Polybags [last update 27.05.2025] / 75400 75391 75344](https://media.printables.com/media/prints/427956/images/4197916_10ccaadf-5adf-459c-923a-defcc0d5886b/img_20230702_152357.jpg)
![M3201 Ender-3/CR-10 [Micro Swiss NG Extruder] - Fan Shroud and Probe Brackets](https://media.printables.com/media/prints/708060/images/5554855_c8f0442f-02a2-401d-a399-6c8e5d4b0216_3490802f-a225-4f60-a8a5-b4a7a32cb31d/image1.jpg)
