107 modeli
I got tired of the slimq being on the ground. So, I created this to put it right next to the night stand. Two versions: one with cable hanger, one without.
Wydruk około 1,89 €–2,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In the files there are two separate projects for X1C and X1E, you can of course modify the files to fit your printer. I will be updating the model to accommodate servos, FPV camera and other things. Print settings: Infill: 5% Infill…
The General Atomics MQ-9 Reaper, an Unmanned Aerial Vehicle (UAV) which can serve as a surveillance craft, though primarily as a Hunter-Killer, capable of wilding a wide range of ordinance. Currently operated by the USAF, RAF and Italian…
Made this model as a gift for a pilot I know. It's not perfectly to scale, but close enough to fool most people. Print the parts up and glue them together.
a protective box for the gas sensors MQ, MQ-135, MQ-9, MQ-2, etc. can be easily fixed on a support such as a wall with double-sided scotch tape Nov 2024 update: we've updated the box to include holes for aiming the lid. Print Settings…
MQ-9 REAPER (Predator-B) model cleaned to the best of my ability designed to be thrown. Was aiming for a medium glide with proper aerofoil that fits on a Prusa mini 180mmx180mm bed; prints within 30mins without supports (Printed in wet…
Printed on a Bambu with standard settings in PLA with no issues. No supports. I've only tested a few, but they seem to all have the same footprint. VCC, GND, D0, and A0 are labelled (V,G,D,A) on the bottom in order but please check that…
Este modelo 3D está inspirado en el UAV MQ-9 Reaper y ha sido desarrollado como un proyecto integral que abarca diseño CAD, fabricación mediante impresión 3D y simulaciones aerodinámicas en CFD.
A Arduino/ESP8266/NodeMCU based RS232-MQTT-Bridge to control a beamer via the serviceport. You find the Firmware on my GitHub-Repo: BeamerControl Print instructions Parts 1x NodeMCU V2.x 1x MAX3232 RS232-to-TTL Adapter 4x 2.5mm Heat…
"Now for something completely different, but kind of the same!" Introducing the Crush, FoamQB Edition! This Crush/Rush remix uses ALL NEW PRINTED COMPONENTS and is a COMPLETE REWORK from the originals, however it still retains the same…
This is a motion detection and multisensor device I've created. Built with an ESP8266, DHT22, Lightresristor and a PIR Module. It use MQTT to transmit the values. To assemble the motion Sensor you need the 3d parts and the PCB board. The…
This is a dust collector with a pass thru for a standard MQL system. 2023-10-17 Now the fusion file is there You will require: 3x 10mm M3 screw ( Amazon / Aliexpress ) 3x M3 heat set insert (4.6mm OD) ( Amazon / Aliexpress ) 12x 8mm…
This is a case for the DMQ Design SPIN Macropad . This is a cool macropad that has 12 keys and 3 rotary encoders. I designed it with two different leg options. One, as pictured, that raises it slightly and angles it by 5 degrees. The…
Magnet based off of the MQ-Reaper drone. Uses 6mm x 3mm magnets.
I thought the price for the Apogee wand was nuts, and I have a bunch of ½" PVC laying around, so I made this. Seems to work pretty well. I printed without supports.
My idea for small weather station. https://github.com/MateuszCiastek/meteo/blob/master/Mega_Projekt.ino Work in progress for Code. Case will be the same (i guess). Maybe i will add internal battery and replace back cover. to mount…
Watch band for Casio MQ-24/MW-59 It can prints without support. Use Flexible filaments. e.g., Flexfill 98A, Pxmalion TPU
Quest 3 adaptor for a cheapo Bobovr M2 clone halo headstrap
Simple model buil with thinkercad. I tested with PLA and with a Creality Enver V3 se. I made 3 models for my 3 Mini PCs dreamquest at home. Any question, send me a email with the subject: “Mini-PC Dreamquest Fan” to [email protected]
Digital filament scale with RFID and MQTT (translated from german) This filament scale recognizes the filament spool placed on it by the attached RFID tag. This tag contains information about the spool number and its empty weight. If a…
MQ Sensor Holder Category: Electronics
trochu upravený a odlehčený držák na mixér Braun MQ9 s příslušenstvím. Ve sliceru je potřeba zvolit spodní plochu modelu - ořízl jsem spodek tak aby byl držák lehčí a vypadal lépe… Otvory pro uchycení jsou podle děr co už mam ve zdi.…
recommend lower support material density
The polyurethane material failed after 5 years in the tropics. These 3 parts are direct replacements. You may need just one now but sooner or later, all 3, as all of mine disintegrated in short order. Print on a smooth build plate in TPU…
A baseplate that allows the creation of every imaginable accessoire for your Bineer Board Tool Wall. These Bineer Boards look cheap (cause they are) and the tool organizer that came with it are not great ether (at least IMO)… but they are…
Recently, I setup home assistant goal of collecting data from various sensors around the house. for some reason, having Information like temperature, humidity, and Co2 levels all visually displayed on a dashboard sounded like a pretty…
A blank top (no logo or text) for the OPenDTU case. Fits an ESP32 (30 pin) devboard and a CC1101 radio. Using the OpenMQTTGateway-software this results in a self contained RTL 433 Mhz to WiFi bridge.
Add on to Velux remote control to use it with MQTT and ESP8266. https://www.chrisbue.de/velux-esp8266-smart-home-mqtt/ Print Settings Printer Brand: Anycubic Printer: Kobra 2 Rafts: Yes Supports: Yes Resolution: 100% Infill: 45% Filament:…
An ESP8266/Wemos D1 mini based air quality monitor. Please note that this should never be used to replace a proper CO monitor and should be used for informational purposes only. For more info, please check out my blog post about this…
Bambu Lab LED Progress Bar (DIY version using Home Assistant + ESP32 + WLED or MQTT) There’s a ready-to-use progress bar kit available from BIQU if you prefer something plug-and-play: BIQU Panda Status LED Light Bar Kit H2D-Style I wanted…
This is a case for this Router: https://www.zigbee2mqtt.io/how_tos/how_to_create_a_cc2530_router.html For the great zigbee2mqtt Project. I designed the Print without screws needed everything snaps together and is printed on an Original…
Project Description: Custom MQ135 Sensor Housing This is a precision-designed, 3D-printed enclosure for the MQ135 Air Quality Gas Sensor . The housing is engineered to securely hold the sensor module while allowing maximum airflow to the…
Print instructions 4 perimeters Supports enforced between main part and top cap PETG or ASA Insert O-ring into the top groove.
This Gridfinity-compatible key holder is designed specifically for the Volkswagen Golf 7 flip key. Sized at 1×1 units and 6u high, it provides a clean and practical way to keep your car key organized within your Gridfinity setup. The…
Remix of the LaunchXL Enclosure by millibyte for the TI LaunchXL CC1352P-2 (longer than original because of PCB-Antenna and SMA-Socket) Changed some details to make it fit M3 Screws from the bottom and added the Zigbee 2 MQTT Logo :) Hope…
TL;DR A broken plastic part with less than 1 g has been redesigned and 3D-printed, thus avoiding 975g of garbage in the form of a defunct mixer. Machine to repair Our Siemens hand mixer MQ90001/02 broke about 3 years ago. Thanks to the…
This is an enclosure to mount an eBUS Adapter v3.1 PCB + Wemos D1 mini adapter + MQ2 organic gas sensor together. Here's the main link to the eBUS adapter (I have no personal nor financial interest, just a link for reference) :…
This is a 3D-printable enclosure designed to house a Victron2MQTT PCB and a Wemos D1. The case consists of two parts: a bottom housing and a snap-on top cover. The design includes ventilation slots for heat dissipation and mounting…
Shift Universal Akku transport case für 2 Akkus Fully 3D Printed, hinge is a 1,75mm Filament 4x 5x3mm Magnet Passend für Universalakku der Shiftphones Or just Buy it here: https://www.segelwelt.org/index.php?id_product=20&controller=product
i recommend that you reduce it to 80% scale, and use tree support. print time 5-6 hours on 70 mm/s
Remix of the Satsana Mini 5015 to fit the Ender 3 V2 a bit better with a back tab and an adjustable BLTouch mount. Print the base flat on its back with supports. The BLTouch is printed flat on its back with organic (tree) supports if your…
A hard-to-find replacement part for the LMQ II paper folding machine. Part: LMQ Feed Drive Pulley - 27-0516-00 Step Files Included! This part can be adapted and used with many belt driven gear systems! Print Settings: Infill:…
You need some 15mm wide double-sided velcro strips to hold the power bank and the mount. I'm using xiaomi 5000mAh (perfectly balanced) and 10000mAh (too heavy) power banks. Happy Gaming！ Print Settings Printer: Micromake D1 Rafts: Doesn't…
This is a 3D-printable enclosure designed to house a Victron2MQTT PCB and a Wemos D1. The case consists of two parts: a bottom housing and a snap-on top cover, making assembly easy without the need for screws. The design includes…
Introducing the Blitz Shorta, FoamQB Edition! These are shorta length Blitz Saya mag holders, but with personal optimizations, including a retention screw for the MOLLE fastener, as I run my holders upside-down. These are tested…
A simple and fast print (0.2mm with no support) box with cover. I added the possibility to clip the board or screw if necessary.
MQTT Cube for Wemos D1 Mini with 0.96" Display. Tutorial for a MQTT-Build (German): OLED-Display mit FHEM-Infos über MQTT (ESPEasyMega) Inside is the Cube and the Cover with a hole for the Button (Display wakeup): Switch Input Custom…
Wall holder for mixer Braun MQ9. The assembly holes were already pre-drilled in my wall, so I want to use it for this. But works good.
A simple diy solution for MQL(Minimum Quantity Lubrication) part cooling for CNC machines. For external hardware you will need: Pressre reducer 4mm PTFE Connectors 4mm PTFE Tube 2mm brass pipe 4mm brass pipe Teflon Tape Corona Test Bottle…
This adapter allows for the ASUS ZenScreen MQ16AH portable monitor to be mounted to a typical VESA stand. In order to use it you should add some double-sided 3M tape to prevent the adapter from wobbling and to add space for the mounting…
Flat surface holder for the MQ-9 gas sensor. My sensor's PCB was ~20.3x32.5 mm; depending on the manufacturer, there can be small variations - try heating the holder a little and pull the legs into place for a good fit, if needed.
track your state of your house windows with an ESP32 with MQTT: The sensor has a tiny pcb with hall sensors between your window and your handle. These hall sensors track the position of your window with magnets. A seconds pcb is used for…
Mount for the HILTI MQ System. 30mm Distance - 2x holes for M5 screws.
Needed a scale for my Lathe Print Settings Printer: Prusa I3 clone Rafts: No Supports: Yes Resolution: 0.1 Infill: 25% Filament: Kjell PLA Red Category: Parts
Material: PETG, 100% infill
German blog post: https://niwla23.github.io/posts/mqttsiren
The communications port of the Sofar inverters provides a convenient 5V power source that can be used to run a Sofar2mqtt interface. I designed this housing to go between the supplied LSW-3 WiFi dongle and the inverter as it is also a…
Designed this box for the Pump controller from END-CNC´s MQL System. Slide the Cables through the glands (M20 for I/O from machine controller / M12 for two solenoids and the stepper) and wire it to the Board. The two boards just slide in,…
The model is suitable for both cup holders, despite their different heights. If you have a specific task of carrying something in a cup holder, or if you're afraid of scratching the plastic in it, feel free to use it. I made a version for…
This is a mounting platform and sign bracket for the MQ-9 Reaper kit card by Nakozen available at https://www.printables.com/prints/143171 . These parts are designed to attach to a 3UDC pivot arm so that you can present this model…
Info this is small box for Laskakit esp32 bundled with e-ink ( https://www.laskakit.cz/laskakit-espink-shelf-213-esp32-e-paper/ ). It reads data from MQTT (structured as form-data) and displays first 4 parsed key-value pairs. First value…
https://github.com/Scorch1262/MQTT-Mini-Sensor-MK1
Have been working on this clock for a little while and needed an enclosure, and this one does the job very nicely (thanks to creator), and I used part of the Desktop widget clock for the screen insertion into the face (again, thank you).…
Summary D1 Mini & MQ135 Case MQ135 has the pins removed USB-C Version Remix Print Settings Rafts: No Supports: No Resolution: .2 Infill: 20
Zigbee2MQTT logo functions as a wall mount for the SONOFF zigbee dongle. The USB cable I'm using is an Amazon Basics USB extension cable. You may need to modify the inner yellow piece if your cable is different. This model consists of two…
Description: This is a model of a device that simulates how a sensor reacts to poor air quality and displays the data on an LCD screen. It’s a simple and educational project, ideal for learning the basics of air quality monitoring and…
WIP Enclosure for my DIY MQTT Blinds Project Any feedback is welcome!
Here you can get the case for a ir-remote control. This case can hold a pcb and an ESP8266 for installing it in front of an stereo or TV system and control the system with infrared commands that will be send to the ESP8266 over WLAN in…
3D Models for Garagentor mit MQTT ESP8266 smart öffnen Project. Connect your Novoferm garage door with your smart home by using ESP8266 and MQTT. Get status "door closed" or open and shut it remotely Print Settings Printer Brand: Anycubic…
simpel logo to print for your home
https://github.com/Scorch1262/MQTT-Mini-USB-Power-Schalter-MK1
I got the Bresser MQTT project working and I've modelled a nice and small enclosure for it. This can be used as a base for other projects on a 40x60 prototype PCB. When a nodeMCU ESP8266 in soldered in the exact place as on my print, the…
Based on Jaroslav Krčál's design, I have created a table stand version that is easier to move around the table. I have designed six holes at the bottom of each foot, where you can insert 5x10x2mm magnets to provide more stability on a…
Key to unscrew engine in blender Braun MQ787
A simple box to contain the electronic for the Alpha2MQTT project. (https://github.com/dxoverdy/Alpha2MQTT)
This item uses 4 off heat set inserts https://www.aliexpress.com/item/1005003582355741.html?spm=a2g0o.order_list.order_list_main.59.26ad1802JycXAv
I build this Device so my daughter could send “cannot sleep” messages to our Phones. DC-DC Modul: https://shorturl.at/Lm2Zz Aliexpress The ESP is flashed with Tasmota: https://templates.blakadder.com/ESP-01S.html Integrated “Nightlight”…
I made the Modular Fiddle 4 String V4 with MQTT controllable LED Lights and wanted a matching bow. This fits a WemosD1 Mini and a 500mAHr battery. The battery lasts about 1hr using the Rainbow effect at brightness 128 (1/2 power which is…
LOLIN board (Wemos D1 mini), power connector, button, and LED. The LED should be connected from the power connector to the board so that when connected to the USB port for flashing, the LEDs don't receive power from the computer. The…
https://github.com/Scorch1262/MQTT-LED-Dimmer-MK3
This is an exact copy of the door striker on the microwave door. They can break easily and why replace the whole macine when you can print repair it instead.
Designed specifically for SlimQ 150w charger so the charger sits vertically.
https://github.com/Scorch1262/MQTT-USB-Power-Schalter-MK1
I have printed mine in PLA with 100% infill.
A project I've been working on for some time to monitor humidity and temperature via MQTT that I could feed into Node Red or Home assistant. The 3d models are a bit of a work in progress but they are currently working well for me. You'll…
MQTT Pocket Broker - Standalone ESP8266 Broker & IoT Gateway Description Tired of needing a full Raspberry Pi just to run a simple MQTT broker? The MQTT Pocket Broker is a compact, dedicated MQTT server built around an ESP8266. It hosts a…
I have created a housing for my CC2530 - CP2102 Zigbee2MQTT Coordinator. The case does not need any screws. Just press the two parts together. Wiring: CP2102 - CC2530 GND - GND 3.3V - VCC RX - P03 TX - P02 Print instructions Category:…
Ever since I bought my 3D printer, I've been planning to design a custom enclosure for this device. Until now, the wires were just a mess, constantly getting caught on things or coming loose, which caused reliability issues. I finally…
Squeeze a Pi Zero 2W into the center of a WisMesh Pocket v2 all-in-one Meshtastic handheld! For power, I tapped the third leg of the power switch and a GND pin on the radio to connect the Battery IN pins on a MH-CD42. This will step up…
This enclosure holds: ESP8266 flashed with Tasmota RF (315mhz) receiver and transmitter 3.3 stepdown voltage regulator (AMS1117) 12v boost converter for the transmitter USB-A plug for power The enclosure has holes for a USB-a male plug,…
These are the 3D-printed components for my freezer door alarm system. Construction instructions are available at the following link: https://www.instructables.com/Freezer-Door-Alarm-System-Using-MQTT-and-ESP8266/
Just like the others, this model requires two supports and can be printed using the same settings as the other models. (0.2 mm, 2 mm, 15%, no supports)
Compatible with most standard MQ-series gas sensor modules, including MQ-2, MQ-3, MQ-4, MQ-5, MQ-6, MQ-7, MQ-8, MQ-9, MQ-135, MQ-136, MQ-137, and MQ-138 (32 × 22 mm PCB).
Reaper drone made by the U.S military. Very easy to print. The General Atomics MQ-9 Reaper is a medium-altitude long-endurance unmanned aerial vehicle capable of remotely controlled or autonomous flight operations, developed by General…
LOLIN board (Wemos D1 mini), power connector, button, and LED. The LED should be connected from the power connector to the board so that when connected to the USB port for flashing, the LEDs don't receive power from the computer. The…
I printed the Lenovo rack by Hermann S and I wanted a matching one for my Dreamquest n95 pro with two ethernet ports so I made this. Power button is on the front. You need to remove the feet to make it fit. Use the screws and holes from…
This is a 3D-printable enclosure designed to house a Victron2MQTT PCB and a Wemos D1. The case consists of two parts: a bottom housing and a snap-on top cover. The design includes ventilation slots for heat dissipation and mounting…
I made the Modular Fiddle 4 String V4 with MQTT controllable LED Lights and wanted a matching bow. This fits a WemosD1 Mini and a 500mAHr battery. The battery lasts about 1hr using the Rainbow effect at brightness 128 (1/2 power which is…
