Liczymy pasujące modele…
Approximately 700mm long model of the MZKT launcher. The model has 8 axles of which the first two are steering and the last 3 are steering on the opposite side, on the back there is the rotation control system. The silo can be held in a…
Emz supposedly works for her uncle Mortis at the mortuary, but she rarely makes an appearance there. She's too busy hawking her hairspray brand online.
Signature of Mustafa Kemal Atatürk, the founder of the Republic of Türkiye PLA filament no support parts can be printed individually and moved wherever you want on the table
I've included my models for the main and secondary side buttons PCB in case anyone finds it helpful to create their own mod. That said, only the main PCB is tested for accuracy as that is the one I used in this model. For assembly, slide…
Bridge holes and neck holes had to be moved for Leo Jaymz kit from Amazon. This is still a work in progress. 4-8-2023. The middle section is finished and printed. The bridge fits as does the neck. I need to move holes in the Control piece…
Remixed to fit on a 220mm x 220mm print bed. Category: Tools
I love Vintage Russian Lenses especially the Helios 44-2 58mm f/2.0 . It's a dirt cheap prime lens with an amazing swirly vintage look. A couple of years ago I made some Aperture Inlays, Yes this doesn't require to remove the aperture of…
Do you like all the various burners out there but are just not having luck printing the larger models? Well, you can now have the cooling benefits with just a drop in. See comparison photos for cooling improvements. My model is marked…
I just took MZ4520's model and deleted the book
Diese Siebe ergänzen mein System zur Mehlwurmzucht: https://www.printables.com/de/model/647981 Sie dienen zum Sortieren der Mehlwürmer nach Größe. Mehrere Siebe können übereinander gestapelt werden und zusammen auf einen geschlossenen…
mini clé triangle porte clé pour ouvrir armoire pmz et autre Print instructions Print Settings Printer: Discoeasy 200 </div> Rafts: No Supports: No </div> Resolution: 0.2 Infill: 50 </div> Filament: ice filament pla red
check your slice before you print it since the bottom will be nonuniform
IR-Lesekopf mit Wemos-D1 mini für einen Stromzähler mit einem Ringmagneten (27x5x5) Für den Wemos: https://tasmota.github.io/docs/Smart-Meter-Interface/
A theatre building remix for a generic SciFi setting, at 6mm scale. (Funnily enough, CaptainFathom just re-uploaded these. I've been working on repairing a few of these to make them suitable for 3D printing.) I've added extra detail and…
Mystikal's design is perfect. I simply must be buying my filament from Dr Doofenshmirtz, cause my spool holes on these AMZ3D spools are SMALLER than most of the ones I've used. So, without further ado, here's the Remix of Mystikal's…
Delta PMZ-24v240WDAL PSU for the Prusa i3 MK3s+ (The black version) You can use this STEP model as a base start for any modification/upgrade.
A Spanner for the lid of Fermzilla range of fermenters by Kegland. I've only tested it with the all rounder model but I think the lids are the same. It may work for other models as well. Print in PLA as its a little stiffer than PETG.…
WARNING : This Upgrade requires you to basically gut your printer and rebuild the electronics from scratch. As such, it is recomended for Advanced 3D Printer Users with some electronics skills only. If you would like to keep your OEM…
Hallo Kollegen, Wer den Deckel, wie ich, schon mehrfach kaputt bekommen hat, kann ihn nun nachdrucken. Wurde vom Original abgeleitet und passt perfekt. Grüße Bonsai
This model is compatible with the lego system.
This models can be printed in TPU and used with Proxxon Vice to better keep fragile object. Available flat or with aligned 45 degree cut. Buy me a coffee if you want to support me!
Mit dieser kleinen Schaufel kann man Mehlwürmer oder Mehlkäfer aufnehmen und vom Futter trennen. Die Schaufel ergänzt mein System zur Mehlwurmzucht: https://www.printables.com/de/model/647981 Druckeinstellungen: Stützen aktivieren. Ich…
A SciFi building/hanger remix for a generic SciFi setting, at 6mm scale. I've fixed many of the meshes and made it manifold, added some extra detail, and scaled it up to 125% from the original thing specifically for 6mm scale. This set is…
With this simple coupler you will be able to connect any male threaded ¾ inch part to the receiving vessel of a Fermzilla fermenter (https://www.kegland.com.au/kegland-fermzilla-conical-27l-uni-tank.html). I modeled this because I needed…
This is a vented oil funnel for 2.3L MZR DISI Mazdaspeed engines (like my 2012 3). I could never find a funnel that sat well in the oil filler, so I made this one. It is rock stable on the engine. It fits snugly inside the filler hole,…
Gehäuse für den IR Lesekopf (27MM Ringdurchmesser) Erstellt für diesen Sensor (…
Layer height is 0.15mm (60% of originals 0.25 mm)
Introducing the "EuroSteadyPlate" – the epitome of sleek functionality for your EU license plate. Crafted with innovation in mind, this minimalistic bracket is the antidote to the clunky eyesores of traditional black holders. The…
Atatürk Silüet ve İmza Plaka Anahtarlık
This is a holder to keep any kind of 1/2 inch BSP threaded hose connect on top of your Fermzilla. For me it is quite handy to connect the hose coming from my plate chiller up to this, so I don't have a loose hose flapping around in my…
Remix of @Teo_'s Rat Rig V-Core 4 PTFE tube support for Smart Sensor for Orbiter v2
I wanted a slim cartographer usb cable holder that will work with all extruders. Print in the orientation shown in the picture. Material: ASA or better Walls / Perimeters: 4 Infill: Gyroid / 20% Materials needed: M3x12 because of the…
Update 9/6: Found the sweet spot for printing this at an angle. I have added a new 3mf file with the exact orientation i printed at. Bambu Slicer gives a angle of 59 degrees for the Y axis. I also changed to glass infused ABS and it has…
This is remix from https://www.prusaprinters.org/prints/17584-bondtech-bmg-prusa-mk3smk25s-v2-fdm-printable-rhd- for Dragon Hotend without aluminium adapter similar like E3D v6 This is a quick conversion, so please comment if there is a…
I originally designed this case for my Anycubic Mega Zero v1, but it'll work on any printer and use either the original Mega Zero v1 LCD or the BTT TFT35-MZ Colour LCD. It includes space for a 40x40x20mm (or x10) 24v intake fan which I've…
Joined feet so they don't break during removal from buildplate. Also added built-in connection between body and neck.
This toolhead cover design was made to resolve my problems with part fan cooling after I upgraded my K1 Max to a Booty Call Jones linear gantry and upgraded my hotend to Dragon Ace with Melt Zone Extension (MZE) that effectively lowered…
All credit to Annex Engineering for their awesome Sherpa Micro Extruder https://github.com/Annex-Engineering/Sherpa_Micro-Extruder Lock stl credit to SIVIS https://www.printables.com/model/282299-sailfin-extruderremix/files I remix 2…
Adapter from standard microphone holder to microphone Sennheiser MZH3040+ME36
I dont guarantee 100% accuracy, used the dimensions provided by the listings , couldnt find anywhere so i made my own
Wall Mount for a BMZ /Norco eBike Charger
It is my first ever dual color print. Made a dual color version and added also a single color version stl. It is just an easy dual color test print which ist't very big.
für Essiggurkerln, eingelegte Zwiebel, …… einfach skalieren die Größe wie ihr es braucht. Infill 10% genügt
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Final Fantasy Tactics inspired, Ramza, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…
Tool to help undo the collection jar from Fermzilla fermenters.
Added mouse ear to Pinda sensor and Pinda screw hole is filled due to cracking problems.
A small topology optimzed shelf bracket. Resizable for any shelf you want to build. Prints completely without supports.
Added tolerances, fixed some interference issues, fillets, sacrificial layers to eliminate a lot of support material needed, stuff like that. Should print better, cleaner, more accurately, and have better fitment off the printer w/o as…
Cable box for the Echo Dot 5 power adapter Supportfree power adapter with this dimensions: 70 x 41 x 38mm (approximate)
this is a light remix of MarcoZ76's model just added 2 things for better printing.
Mehlwürmer sind ein Leckerbissen für Hühner, Wildvögel und viele andere Tiere. Das hier vorgestellte System habe ich für eine Mehlwurmzucht von kleinem bis mittlerem Umfang entwickelt. Es dient zur Aufzucht von Mehlwürmern und zum Schlupf…
The Fermzilla lid is often hard to lift off. Kegland showed a new handle with a hole that fits over a carb cap and gives leverage to help remove the lid. I created this quickly to do the same thing.
Ladies and Gents, This is my Heated Bed Upgrade Guide for the Mega Zero v1.0 ! This is in 2 parts, one for the SKR Mini MZ (the easy version) and the Advanced version for the Stock Melzi Board. UPDATED: I've now included a compatible "PEI…
Stylus for Graupner RC transmitters. For models MZ-18 MZ-24 Mz24 Pro. The tip of the stylus should be smoothed after printing.
Hotend mount for Dragon ACE Volcano MZE 63,6mm Standard Voron Print Settings.
best printed in 3 colours on different layers
This is a battery holder for R-line 550mah on the top of the lightning 2 from YMZFPV
This is a desk stand for the classic Sennheiser MD 441 microphone. I wanted it to look like the original MZT 441 stand you could buy for the microphone, but since I didn't have one myself I modeled it after reference images. Still, from…
MZ Keychain w/ Logo only, hollow design Bicolor revommended
I've added the 3DTouch sensor to the Bondtech BMG Prusa extruder. Personally I don't like the inductive sensor as the detection height depends on the thickness of your steel sheet bed, which means if you have low quality spring steel…
Recreation of the Sony MZ-N510 battery door. The model is good enough for use but the print is tricky due to the tiny details on the original injection moulded door. I printed it with petg on a Bambulab A1 Mini using a 0.4mm nozzle and…
Wasserfestes Gehäuse für Strom Zwischenzähler Gehäuse und Deckel für 230 Volt Zwischenzähler. Gehäuse aus PET , Deckel transparentes TPU. Löcher für 20er Pg Verschraubung für 3x 2.5mm² Kabel. Wasserfest durch den flexiblen Deckel. Der…
Klíčenka SUPER FUN EMZ (pin) . Keychain SUPER FUN EMZ (pin)
Manueller Choke/Startvergaser für BVF 16n1 Vergaser und weitere. Es muss nur eine leicht bearbeitete Schraube in den Startkolben statt dem Bowdenzug geteckt werden und ein kleiner Hebel gebastelt werden. Das ganze sieht dann so aus wie…
YMZFPV provided me with this TPU Battery Holder STL for their Lightning1 2" FPV Quadcopter. I also made a larger remix for Tattu 550mah batteries that were slightly bigger.
Remix of MZ4250's Baba Yaga Horseman, but recently decapitated for Halloween for use as a hood ornament on the Ghost Car im building for Halloween.
Nomm - Nomz "Nomsterz - Little Monsters, Big Appetites" CLASSIFIED NOMZ FACTORY FILE: 001 Deep inside the Nomz Factory, scientists attempted to create the world’s cutest creature. They succeeded... mostly. Unfortunately, every Nomster…
Wrench to undo the butterfly dump valve on Fermzilla fermenters. Remixed to fit on a 220mm x 220mm print bed.
Die Dichtung passt für alle BVF 22mm und 24mm Vergaser mit Zentralschwimmerkammer der Modelle MZ ES 125/150, ETS 125/150, TS 125/150 und ETZ 125/150. Die Dichtung muss aus TPU gedruckt werden. Im Slicer kann die Dicke Variiert werden,…
Cable box for the Echo Dot 3 power adapter Supportfree power adapter with this dimensions: 51 x 51 x 35mm (approximate
Expired Gummy Bear Vase -Nomz™ Still Cute, No Longer Edible. Easy Print, No Supports 0.16 or 0.12 2/3 walls, 5% Gyroid. This model is free for personal use only , if you want to sell physical prints of Nomz designs, or you want to support…
Halterung um ein everHome EcoTracker IR Smartmeter an einem eBZ Stromzähler zu befestigen. Inklusive seitlicher Verdrehsicherung an der das Smartmeter zusätzlich mit doppelseitigem Klebeband fixiert werden kann
Features: 1) Provides up to 150 hours of runtime, uses a 18650 battery with 10x the capacity of the internal battery. 2) 'Latches' into the RH1 using the battery door. There are hollow spaces in the door that catch the sidecar; you should…
I was trying to disassemble my brewzilla by myself after not taking it apart for a LONG time and i couldn't do it. Got a second pair of hands and the coupler between the body of the fermenter and butterfly valve assembly still wouldn't…
This is a homemade USBC charging dock for a Sony MZ-E630 MD Player, also compatible with similar models that use a rechargeable NiMH gumstick battery and have a similar charging port. The dock may need to be modified to fit bulkier models…
This is my 24v Heated Bed Upgrade Guide for the Mega Zero v1.0 ! This is for the SKR Mini MZ Board - the stock board is 24v compatible but lacks the power control MOSFETs for a heated bed. Major benefits of going 24v are: Faster bed and…
In my kitchen I have a cabinet. In the rear of the cabinet there is a 220V power outlet which comes directly out of the wall. The previous owner of my apartment installed a lamp to this power outlet. Having an unprotected power outlet in…
Remixed Shotgun Shell for 1887 Shotgun Nerf Blasters I just didn't like the smooth design of the original. Fits the cheaper YAMZ M1887 model, not checked for the UDL and other M1887 variants.
I designed a different holder for my Powermeter by Siemens as the two offered by IngoKnito are not suitable for me. Please use the other parts from thingiverse project https://www.thingiverse.com/thing:5567461 Print Settings Printer…
A Smartphone mount for Graupner mz12 or mz12 pro RC Transmitter to use a FPV 5,8GHz OTG Receiver for FPV flying. It snaps on the topbow of the mz12 and can be secured with little hooks. The Smartphone can plugged in on one side, and the…
Bolado created a great MZE model based on TL's dimensions but some dimensions were not provided by TL's reference diagram and were slightly off. I have corrected these from measurement and also modeled the silicone sock. This should be a…
Droolz - Nomz "Nomsterz Little Monsters, Big Appetites" CLASSIFIED NOMZ FACTORY FILE: 002 Deep inside the Nomz Factory, scientists attempted to create the world’s cutest creature. They succeeded... mostly. Unfortunately, every Nomster…
Printed the Reaper with Glow-In-The-Dark PLA, The Candle Holders are printed with PETG. Candles were Home-made scented candles. Size of Polycarbonate Containers : 38 mm x 12 mm
Original model by and many thanks to @MZ3D. Bottle cutter with scalpel knife blade, remixed to fit common leadscrews. I also added KRW for my friends out there, along with some other coin varieties.
Fit for "WypAll General Clean L30 Heavy Cleaning Towels" - makes functional use of 1" wooden dowel - see my YouTube video of this part in action: “LowRider v3 DIY CNC - Easy quick project - super satisfying!” I am including the SVG files…
I've been loving the new fermzilla tri-conical fermentor, but once the lid is on the collection chamber, it can become nearly impossible to remove by hand. I created this slip-on collar with flat sides that can be used by hand to get a…
This is a 2 part case for a Raspberry Pi with an Omzlo PiMaster HAT attached on top. It is designed to use the standoffs and screws included with the PiMaster and 4 screws M2.5x8 countersunk. 2 screw to the standoffs from the bottom on…
Update 24-10-24 See black PLA printed version. I extended the cylinder that extends into the case so that the knob doesn't slip out as easily. Secondly I made the bottom side concave so there is better grip with a finger when spooling the…
Mzuzah Casting mold - use tpu to print the mold and apoxy to cast it.
Falls nötig kann ich das Modell mit einem bestimmten Namen für sie erstellen. If necessary, I can create the model with a specific name for you.
I moved the holes to line up with my kit more accurately
Have you ever wanted a little tower for you Print In Place Dice Tower. Then this is for you. Slots into the diamond shapes created by the mesh to attach. Stores standard sized dice, and has a little slider mechanism to change the height…
Introduction I love my MiniDisc player, but unfortunately, I am spoiled by wireless headsets! I decided to remix a cradle for my Sony MZ-NF610 and turn it into a case that holds some commercial-off-the-shelf parts to add Bluetooth…
The camera has a friction fit in the frame. No screws needed. Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: TPU
I use transparent PETG for “whiteplate” and transarent green PLA from dasfilament.de for the signs itself. An ordinary 3xAA Battery lightchain with timer function perfect fits inside. Glued with a bit of UHU acryl glue.
As all the other battery holders did not seem to work for me I made my own. V1: has hooks to hold on to the frame. V2: slides ove the frame so won't pull off in a crash.
Needed a way to mount my pressure switch. Printed mlok down support enabled. I added support for the slot overhang. Not sure if its needed or not. I had to use 10mm length mlok bolts for my application.
