Liczymy pasujące modele…
Phone holder allows for fine control of tilt. Probably overkill for some uses, but think this might be useful for video chat or work conferences where you want to get the camera angle just right. Link to adjustment demo GIF:…
Nice modern dcorative plant pot or planter for your home. Most easy to print in 2 or 3 layered Vase mode setting. Prefered material - PLA filament. Happy printing!
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…
I updated “the most articulated Snake ever!!!” that the segments can not be rotated complete 360 degree anymore and holding better together. I added a test file that you can check before, if your printer settings will work without…
More tags you can find here: https://www.printables.com/model/1079716-christmas-tags-christmas-ornaments-20 https://www.printables.com/model/1080601-christmas-angels-christmas-tags-christmas-ornament
Print in Place Bearings with real rolling elements. ! ATTENTION ! - these models are hard to print and fail easily. - your printer MUST be able to print gaps of 0,1mm width - clean your printbed - make sure, great adhesion is possible -…
christmas ornaments three designs for christmas ornament spheres dimensions in mm: ~ 76mm diameter there will be some small overhangs in the top of the sphere, which don't really impact and are not visible as they are on the inside,…
If you like these maybe you also like my Stringart Stars or the bigger Stringart Flower
A nice tradicional pot and planter for plants or flowers. Best to be printed in 2 or 3 layered vase mode settings - material: PLA Happy printing! :D
A nice and quick pot/planter for your lovely plants! they will love it We suggest printing it in a dubble layered vasemode - the outcome is nice and rather quick :D Happy printing!
Mounts for Makita 18V/14.4V LXT battery and tools. Loose fit, easy to mount and unmount. Printed in PLA. Other plastics may have a different shrinkage rate, so model adjustments may be needed. Print instructions Rafts: No Supports: Yes…
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
These are tool mounts for DeWalt cordless tools. They can be screwed into the underside of a shelf and fit to the battery female end of the tool. Print standing up. I use 3 walls, 20% infill, and no supports.
My custom designed lid raiser for the Creality K1 Max. I wanted a simple version which required no additional components but allowed me to open and close the vents on the fly. Lid raisers for the K1 Max help improve the clearance between…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed (Print the pipe upside down) Scale it as you like :)
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
Update 18/09/2023 Added “HSW Single Wall 11x2 SD” & “HSW Single Wall 11x3 SD” Update 30/04/2023 "HSW Single Wall - 11x7 HD" added “HSW Test Wall HD” added All files renamed ---------------- My new Honeycomb Coffee Wall just needs one…
Print the test Piece → Measure it with your callipers → Input the measured results in the Google Sheet Calculator → Get the results from the sheet with calculated Shrinkage → Input in your slicer → Voilá, perfectly calibrated print's…
Hello there, Full credit to user Rusty__Shackleford for this great model "Angled fore grip mlok AFG M-LOK" I just remixed it by cutting side mount which didn't really worked for me, also took me too much time thinking about good angle for…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
Celebrate the season with these intricately designed bell-shaped ornaments, featuring five variants of open geometric patterns in spiral, lattice, and linear styles. Each bell is optimized for 3D printing and maximum visual impact.…
These models and experiment sets are featured in this YouTube video: You will need the latest version of OrcaSlicer. As of 11/15/2025, you will have to do this: 1. Go here: https://www.orcaslicer.com/download/ 2. Download the nightly…
This is a Squintsworth Glasses Holder. It works well with any glasses or sunglasses. Looks great on a desk or night stand. Recommended print settings layer height: 0.2 mm infill: 10% gyroid perimeters: 3 supports: no Prepared files…
Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 02/2024: V2 is now available. This version contains filament clips on both sides! See…
Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…
Simple and stylish way to add charm to your Christmas tree. This festive set includes four beautiful shapes: a Christmas tree 🎄, a star ⭐, and two snowflakes ❄. Each ornament prints completely flat as three simple pieces that you slide…
Designed to attach the thinner Wago 221 junction boxes to anywhere using M3 countersink bolts. There is a 2.2 mm diameter hole on the back of the mount parts so you can merge them by using the standard 1.75 mm diameter filaments. I have…
Check out the updated Joints+ for Version 1.0 of Dummy13. What did I change? I added a gap in each joint to allow for easier assembly and provide a longer-lasting grip. This is only for scaled-up versions of the Dummy13. The minimum Scale…
The case is based on my parameterizable " Rugged Box ". A GoPro 8 version is available here . Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut of any order…
This radius gauge allows you to determine the corner radius of parts using a standard caliper . Tested with a Mahr MarCal and a generic low-cost caliper – compatible with most calipers. To calculate the corner radius, multiply the caliper…
ornaments • xmas 2025 four new modern and minimalist bauble designs for this years xmas season dimensions in mm: ~ 76mm diameter important · make sure that: your filament is dry and calibrated so that it deals appropriately with printing…
Advancent error planter or pot fo your plants. The main idea for the structure comes from a great and lovely designer here - Extrutim - He was so kind to allow me to turn it into a pot design (once again big thanks for that!!!)…
A simple yet modern design of a distorted plant pot. Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
Update: I have now uploaded slightly improved versions of the planter and tray models. The tray should now have a snug fit with the planter, keeping it from sliding around and getting off-center. The pictured print was done in matte gray…
Straight and angled tool holders + a quad battery holder for mounting Milwaukee M12 system power tools on Wall Control or standard pegboard. I've made both a heavy-duty version with a 3rd leg for extra stability and a standard version…
Another variety of Christmas tags
Looking for a convenient way to clean your 3D printer? Our latest tool 3D print file is here to simplify the process of printer maintenance. Our Carbon Rod Cleaning Tool is specifically designed for maintaining printers such as the Bambu…
The vice can be adjusted in two different angles and there are several attachments that you can easily change, if you don't like the attachments I have made you can make one yourself, with the drawing with the dimensions as a PDF in the…
This is a series of test prints which were inspired by the following MIT publication : Snap-Fit Joints for Plastics - A Design Guide https://fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf While the above…
Sponge Bob Square Pants. Removed version with thin legs. Fixed multiple shells. added .3mf and .gcode (10/6/2023)
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024:] Added versions without the 2…
To celebrate my 2nd Holiday season on Printables, I decided to add an additional 6 ornament designs to my collection of Vase Mode Christmas Tree Ornaments. I posted the original 6 last year, and they quickly became my most popular…
This has been on my ta do list for months and I've had numerious requests for this Helmet. I've done my best to provide 3 differant variants of the Helmet as evey one likes alternatives, so you now have plenty to choose from. Like…
A hanger combined with a small tray. Two-part design that pressed fit together. No support Needed Print parts one at the time to improve quality. Changes Log: Jan02- Slimmer boat, sail, hook; Print optimization. Jan03- Added a bit more…
harry potter tags for Christmas, Pendants or keychains
A better scraper it is. Why would so many makers print a scraper? I've never used one since my flexible print bed and my tiny fingers work fine (don't you ever touch the print bed). Ok, it must be some kind of fetish appeal. But…
This is a remix of Uncle Jessy's Caliper Tool. I add the measurements directly onto the tool to make it even easier to use. This caliper tool makes it very easy to measure to get the perfect size for helmets and other 3D printed armor.…
Folding Christmas decorations inspired by paper cutouts from school years. Used PLA and PLA+ filaments. Printed on Original Prusa MINI+ with standard PLA preset without any problems. Manual filament change required after the second layer…
I'm building out my multiboard and I like the weight bearing snaps as they feel the most secure for my setup, so I put this one together and am pleased with how it turned out Details: Elegoo Neptune 4 Pro 0.6 mm nozzle 15% infill 1.2 mm…
This is a model I uploaded and strengthened the arms that are too thin at the bottom connection by raising the connecting bar and adding 2mm to the bottoms of the arms making them stronger and last longer. 15% infill Printed on Bambulab…
Print Instructions & Recommendations: No support or any other post processing is needed. Models can be printed with 1 or 2 Walls and 0% Infill . It is recommended to use 2 Walls for stability and quality aspects. Unless you are printing…
Created by myself mounts/holders for useful tools which can be use during preparing your honeycomb storage wall. List of custom mounts; Wire Striper for LAOA LA322024 ( https://www.aliexpress.com/item/1005005968272291.html ) Metal burr…
A modern planter / pot design for your plants. it's easy to print and has a great ilusion of spinn in it :) I suggest printing it in 2 or 3 layered vase mode. Happy printing!
A cheap solution to your "under the desk cable cluttering" issues. Just mount a DIN rail to the bottom of your desk and arrange these mounts on it to hold your cables neatly. I could not find any nice and cheap cable management solution…
This model is a remix of the original “ Catch-All Trays / Desk organizer & Catch-All Trays / Desk organizer - stackable remix ” model. It is fully compatible with this remixing models and adds two more height sets of containers to them.…
Slim mount for Wago 221-41* wire connectors on the standard DIN rails. These models are perfect as leftover or wiping tower models. Update #20230417: added double and triple versions. Update #20240922: uploaded Fusion 360 source file.
There are several ways to make Ornaments + Hueforges, the easiest way was to just add a hole in Bambu studio, so I decided to bring an ornament designed from Fusion 360, and combine both. This model was not generated using AI,the photos…
Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it. I use a 0.6mm nozzle and high layer…
Lid raisers for the K1 Max help improve the clearance between the drag chain / filament tube and the glass top as Creality have designed it very very tight. The vents allow you to help prevent the temperature becoming too high inside the…
Modern 80's themed pot and planter for your house and garden plants (mostly inspired by bubble gum) Print settings: Vase mode (best to print in 2 or 3 layer vase mode [regular vase mode just with more outter layers]) Used materials:…
These Dial Indicator Mounts are specifically designed for the Clockwise Dial Indicator and rebranded variants of it. May work with others untested. Here is Amazon link to purchase Clockwise Dail Indicator Clockwise Dail Indicator with…
The arm file is a 3mf that modifies the arm joint by adding a negative sphere body to make it attach better to the torso. You will need a slicer like PrusaSlicer that supports this. I've also attached a head and face insert that may need…
COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…
ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2, 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your DJI Action2 camera with the best mount in FPV! Max protection with TPU in front…
hello friends, I'm Vlad-3d designer from Ukraine , I got this idea and I really want to implement it, first of all, this product is aimed at premium materials and I want to implement it as a final product, but I will also share the final…
Watch the full video here to see how we created this: https://youtu.be/TwzH-t81MFw It's finally time to add Chomper to my list of Plants Vs Zombies characters on my shelf. I modeled Chomper in ZBrush. I mostly used Booleans for the head.…
I've been enjoying modelling SpongeBob characters lately, so I thought I'd try my hand at making Fred the fish. Done in Blender using mostly subsurf and boolean modifiers.
The N-joints are a system for easily crafting solid and inexpensive structures and furniture using square wooden rods and 3D printed joints. The concept is similar to the "Jonction-P" by Samuel N. Bernier's, but here the wooden rods are…
This is a full remix of the excellent Dyson tool wall mount bracket by richieclarkie ( https://www.thingiverse.com/thing:4097193 ). I needed a stronger version because the brackets with screw holes had a 90-degree angle which was a weak…
Fasten your electric cables with these M3 P Clips retaining cable fasteners. Cable outside diameter: 2mm - 8.5mm
Tag s to decorate the Christmas tree or gifts
Customize your own JoyCon grips. Two Animal Crossing designs and STEP file included. Note: Please ensure your extruder is properly calibrated. The first time using this will be snug , but will loosen up just enough after a couple of uses…
An Art deco ispired planter or pot for plants. Best to print in vase mode (can be single or dubble layered - depends on the size) Happy printing! :D
These are some demo files to try out Arc Overhangs on your machine. USE AT YOUR OWN DISCRETION! This is EXPERIMENTAL! The start G-Code is very generic and should work on many machines, yet adjust if necessary. Play around with print speed…
A simple and elegant jewelry box with lid, available with different compartments and stackable. All you need for the lid is an M3 screw with a length of 6-12mm. I've also uploaded a one-piece version of the lid. Here you can use a color…
Introducing the “ 3 Wise Elephants ”. I know, originally it's the 3 wise monkeys. but I'm a big fan of Elephants :) So, we have 3 stl files for 3 different elephants. lets name them as follows : Figure1 : See no evil Figure2 : Hear no…
Wall mounts for some sets of the LEGO Architecture Skylines. Each bracket is to be fixed on a wall by a single screw. The screw mostly balances the model out, so it will not tip over when the screw sits tight. Let's show the world how…
Update 10-1-2024: Added “offset” tiers, to stagger the location of bottles (as suggested by @Xellixor on Thingiverse). New version 3 with screw-based, more robust locking mechanism is now available on the Prusa Store . Version 2 is and…
Hello guys!! I have optimized the wing components to enable better single color printing. I would like to acknowledge the fantastic work of the original designer and give credit for their initial creation. Specifically, I have separated…
Although these are standalone accessories, they were created with my "Gutter Square Downpipe Diverter Twin Access" in mind : https://www.printables.com/model/1637492-gutter-square-downpipe-diverter-twin-access Parts Required To Purchase :…
This is a 3D printable file to get a component bender (CBH5). Series Description 0.3": 2 positions 0.4": 4 positions 0.5": 8 positions 0.6": 7 positions 0.7": 7 positions For bending of electronic components to a standard pitch size Base…
I have made this model to get all instruments following with FF ADV5M PRO: side cutter, screwdriver, Allen wrenches, glue stick, grease, nozzle cleaning pin, extra hot-end/nozzle assembly and USB stick, also a place for the printable…
I wanted to do a jointed model for the Printables contest. Jace1969 (who has a ton of great SW models) had this ATST model, but it was a solid model so I diced it up and added 14 joints to make it into a posable design. I was trying to…
Mount your Milwaukee M12 or M18 Batteries cleanly to your wall! 2 of each file are available. “Non Locking” files will not retain the battery, better for shop or home storage where vibration and movement are not an issue, and easier to…
Greebles Part 2! Entry panels, hatches, and more! No support required The code and model files are using “Hatchbox” pla. Change if you are using something else (trying to use up what I bought a few months ago.) Use variable height to…
Pineaple + Crown = An idea that poped into our mind a few days ago and we created a pot design out of it! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a…
FT EMS (Electronics Management System) was designed to use pretty much any board that can physically fit a designs. The single mounts that have 3 vertical holes can be mounted vertically or horizontally. The boards that have a more than 1…
Different joint parts (simple, double, triple). You can do an infinity of variations with multi legs and arms from Dummy 13 and Lucky 13 … All is compatible with my wings design . Enjoy and hope to see your creations !
Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…
I've decided to try and model/print as many CS:GO knives as I can. I am trying to get better at modelling in Fushion and this is helping a lot. Any advice or criticism is welcome and appreciated. Let me know if you print it! Print…
attachments for the Kaercher WD series vacuum cleaner. the head attachments slide on and off so no alteration needed. will also fits any unit that uses 35mm attachments support needed for most of the attachments. step fil include feel…
Strong and robust support for climbing plants. As it is stackable, it can be reached at any height. Print at 100% infill for greater strength
Fits this case: https://www.milwaukeetool.com/Products/48-22-8435 https://www.homedepot.com/p/Milwaukee-PACKOUT-5-Compartments-Small-Parts-Organizer-48-22-8435/303005752 Make a custom organizer for your stuff!
Introducing a set of six intricate (ornate), flat Christmas ornaments, perfect for quickly and beautifully decorating your Christmas tree! These lightweight, delicate decorations are designed for maximum 3D printing efficiency.
Three different templates for footprints, bootprints and elf shoeprints for the Christmas elf (elf on the shelf). The stencils are set higher on the tracks so that they can be placed over the tracks already created without smudging them.…
Holder for your plants. There are versions with 2,3,4,5 and 6 hooks. FreeCAD version included.
Scroll down for firing demo video ⬇ Please leave a like and and consider posting a rating/make if you print and enjoy the project! These are alternative cosmetic parts for the Znc Aus, with a more aggressive, tactical design. This listing…
The shelf support brackets even when printed with PLA can hold over 100 lbs (tested) and have built-in mounting holes to attach to the wall. I printed mine on the sides with support material to hold up the hexagon webbing at 50% infill…
![#0164 Mini Paracord Winders for the Pack [4 Variants]](https://media.printables.com/media/prints/882186/images/7020696_f2dda904-3cb0-4d82-af08-0a6562f1fddf_366f2abf-6147-415f-ab10-7b27d3b84067/rl-20240621-017.jpg)
