Liczymy pasujące modele…
Technically this is a remix, but there are not yet printable files available as far as I know. Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood. This one had worked very well for me, but I wanted to…
Wydruk około 2,31 €–2,82 € nettoWstępna wycena jednego wariantu
Gcode is for printing with PETG. You might have to adjust the size slightly for differnt gouges. For one of mine I printed it at 99%.
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Each file creates a different angle template 10 for 36°; 12 for 30°; 16 for 22.5%; 20 for 18°; 24 for 15° Use your favorite print settings. Primary use is to set angle arms on a wedgie sled used to saw segmented for segmented woodturning.
These jigs can be used to set a miter saw or a wedgie sled to the exact degree/angle for cutting segments of wood that then can be glued up to make rings for gluing a bowl blank that can be turned on a lathe. Currently included in the…
This is a jig and gauge to woodturn a star. Jig threads fit 1"x8tpi. If your spindle varies, I recommend purchasing adapters rather than attempting to model new threads. For the jig, recommend at least 3 perimeters and 50% infill at .2…
PETG, high infill, 0,3mm bottom layers and 0,15 mm threaded layers.
This is inspired by woodturning techniques and a variation of this little thing: https://www.prusaprinters.org/prints/103978-woodturning-bowl-02 If you like this little thing, you might want to check those ones, too:…
These bushings (range of sizes) enable grasping the rounded end or sphere of a spindle. Please see my video for an application on www.AsWoodTurns.com From one end, the bushing is hollowed to accept a sphere of the given size. From the…
What's the difference between a basket and a bowl? Perhaps just some holes ;-) This is a variation of Woodturning Bowl 07. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing,…
This is an 80mm faceplate intended to be used for finishing turned work on a lathe. It is NOT for use when turning. It has a 1" X 8 TPI thread with 4 countersunk fixing holes on a 60mm diameter. I often have a number of pieces on the go…
I designed a dust extractor for my lathe, which attaches to the hand rest via a rod. This allows the dust to be extracted precisely where it is generated during sanding. The connection fits standard 100mm dust extraction hoses. I printed…
This is a very simple to make sharpening table, which allows near 100% repeatibility and keeps the table right next to the wheel at all angles due to the rotation pivot being so close to it. Printing Nothing interesting here. I used…
Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood, modeled after the nice but expensive Hope Pro Sander. This version fits the more “standard” 608 bearings. You can see the two versions in the third…
Use this at your own risk and caution! I needed some specialty jaws for holding a finished workpiece without damaging the surface. For this, I designed these special jaws to an exact fit. These jaws fit on the Teknatool SuperNova Series…
Time to organize the shop. Where do you put the lathe chucks so they can be found when needed. You put them on the wall using these easy chuck holders. They work best if you use Polycarbonate, but PETG or Nylon will work. Print them with…
You can use the jig like you would a Oneway Vari-grind jig, or use it with a holder for bar guided systems like the Sorby ProEdge or Tormek and similar wet sharpeners. UPDATE : The main part of the jig now comes in 3 sizes : 16mm and 19mm…
This is the bowl version of Woodturning Vase 05 and I think it really works great as a bowl. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing, you might want to check this…
This is a discsander faceplate for woodturning lathes. Put some self-adhesive velcro on it, punchout the holes (or don't), screw it on your favorit lathe, put some sanding paper on it and start sanding! I created and tested the M18x2.5,…
You want straight walls and the beautiful cube pattern? Turn the axis of rotation by 90° and you're good to go. But you will lose the pattern on the bottom of the vase. Or is it a bowl or a trash can? The base pattern is a simple hexagon…
No specific print settings required. For contrasting text color, change filament in top layers. Appropriate for VicMarc VM-120 chuck used for woodturning. Please see my video at https://www.aswoodturns.com/2022/08/soft-jaws/
I wanted to store my chuck jaws on the wall and the commercially available holders seemed over priced for what they are so I decided to make some 3D printed ones. Due to the size of the print bed I had to make it in two halves, so to…
Another variation of the Woodturning Bowl 04. You might call this one the sleeper bowl. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into single colors and…
Inspired by woodworking techniques I tried a variation of a simple stacking pattern. If you like this one, you might want to check this too: Everything is based on this simple pattern: If you like this little thing, you might want to…
Updated 30Apr23 - See below… This is a variety of push-on protectors for woodturning chisels. If, like me, you tote your woodturning tools to various venues in a toolbox, where they can rattle around and crash into each other and the end…
Same base pattern as the vase before, just changed some dimensions and the shape of the vase. I like the left one a bit more but you'll need support to print this. The right one is optimized for printing without support. This might be a…
Still playing with woodturning techniques. Same pattern as for the https://www.prusaprinters.org/prints/102766-woodturning-bowl-01 , but a different result based on the different shape. If you like this little thing, you might want to…
I needed to sand the inside of a narrow but deep woodturned part (for a “Weizenholz”). It is very dangerous to sand the inside by hand, and you can't reach the bottom anyways. This is a adapter for the Crown Revolution tool (I have the…
A handy tool for woodturners – quickly and accurately mark circles with diameters from 20 to 80 mm and find the exact center on a wooden blank. Perfect aid for woodturning. Praktický přípravek pro soustružníky – snadno a rychle označíte…
Still playing with woodturning patterns. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing, you might want to check this too:…
Still playing with woodturning patterns. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into single colors and than patterned along the dotted lines. If you like…
This is based on the internals of Woodturning Vase 07 and prints completely without support structures. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into…
Variation of Woodturning Bowl 04. The shape is more roundish but will need support for printing. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into single…
I designed two different attachments for the live center for turning balls. The attachment simply attaches to the standard 60° center to clamp the workpiece without damaging it. Printed from TPU with 20% infill. Update: Added Modell…
Robust live centers (and others) have ¾"-10 TPI threads for accessories. This adapter lets you put a 1.25"-8 TPI chuck onto this live center. This can be useful for centering or for reverse mounting on some clean-up operations when you…
Based on the Woodturning Bowl 05 I've created these vases. You might also call them "The Bomb" or "Mind bender" ;-) The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are…
I liked the idea of a dust cover from InqEnzo for the dust cover and designed a version for the Nova G3 Pro-Tek woodturning chuck. It will not keep all the dust out, but most of it I hope. The disk just slips on and forms a press-fit with…
Mostly just scaled and adjusted to fit the smaller M8-version of the woodturning bowl sander. Prints flat on one side, I would add a little bit of support for the “upper wing” as shown in the .3mf Bowl sander found here:…
Some time ago I watched some wood-turning videos on YouTube - simply because I enjoy it. Today I was wondering if I could do something like this in Fusion for 3D printing. It's surprisingly simple and a nice visual and interactive…
Ready for some 70s vibes? I like the left vase a little better, the right one can be printed without support structures. Category: Decor
This is an adaptor to enable a sanding pad holder to be used on a lathe. The lathe thread is 1" X 8 TPI with a standard 14mm angle grinder thread for the sanding pad holder. This is NOT to be used with any angle grinder accessory or…
I try to make little wooden spoons You first have to turn something akin to a babies rattle and then mount that ball on a different axis . I found Alan Strattons design (…
Still playing with woodturning patterns. This is a 3 tone pattern but it works in to colors too. If you like this little thing, you might want to check this too: https://www.prusaprinters.org/social/3373-wilko/collections/36089 BTW: if…
As it says in the short description. It holds the sander on the wall. I tried to design it for minimal dust stay-on-top-ability. Printed on one of the angled sides from PLA. This fits the M10-Version, there is also a M8-Version for the…
I turn objects on a lathe. I have turned several styles of stars. For this style, the starting cube must be held by the corners and rotated about four axes. To my knowledge there are not any commercial jigs for this purpose. Print at a…
Another little thing inspired by woodturning. This is a 3 color pattern. If you like this little thing, you might want to check this too: https://www.prusaprinters.org/social/3373-wilko/collections/36089 Print Settings Supports: No…
Customizable tool holder for the Proxxon MICRO woodturning lathe DB 250, including a STEP file for easy modifications. Designed for 3D printing, it enhances tool organization and accessibility.
This is a template of the 'average' chicken egg to aid in getting the curves right while woodturning an egg. I use the notches on the top/bottom templates to give me a standard sized post when I'm between centers / chucked. The site…
A quick design of protective caps for my newly purchased woodturning chisel set 6 pieces from Holzmann. As I'm a bloody beginner in woodturning, this is not a statement on the quality of these tools or that you should buy them. Fits well…
To prevent the mount from breaking again, I increased the outer diameter to improve stability. Part list: spare part cylinder head screw M5x30 | quantity: 1 hexagon nut M5 | quantity: 1 Print instruction: material: PETG or similar…
Protectors for selected spur drives as used woodturning lathes A good spur drive is sharp. It may cut your hand when 'popped' into the taper. Then you kick it out of the taper, it may cut your hand or get damaged when it falls on the…
At some point in time I had to mount my Record Power SC4 chuck on an easel to hold a bowl I was repairing. The easel offered a 22 mm pipe to fit on. My lathe adapter to M33 was in use elsewhere so instead of an adapter to M33 I made an…
It´s designed to be filled with resin and then be fixed on a woodlathe via the thererefor designed holes.
A ‘shoe’ for the drive center. It lets you hold it firmly on the palm of your hand and so ‘slam’ the MT home safely and securely. No risk of the sharp 9 mm center pin piecing the rag you would otherwise probably grab for this. The load is…
Radius gauge ... in three sizes. So this is self explanatory: if you are turning a wooden ball an want to check for sphericality it is nice to have a gauge to hold next to the turning piece. I mostly need 3,4 and 5cm balls, so these are…
I have two sets of jaws for my woodturning chuck, and this print is a way to store the set that is not in use. The design makes room for small magnets beneath each screw, to hold the jaws in place. I used 4x1mm magnets . You will need 16…
To fit properly on an M33 pickup of a woodturning lathe the tool should leave sufficient depth for the 9 mm deep 34 mm diameter report. This condition is not always fulfilled, in particular on tools sold via AliExpress, like this one , in…
A simple tool to help with finding the centre of rounded objects such as bowl blanks in order to mark the centre to allow the material to be mounted centrally onto the lathe.
The "Monster" woodturning hollowing system mounts a boring bar very close to a pivot bearing. The design does not allow gripping the tool beyond the pivot point, so the user has very little leverage during deep hollowing operations. This…
This item is for drilling a 2 inch hole into a board and holding multiple size chisels for woodturning enthusiasts.
I needed a holder for small pediatric blood collection tubes but couldn’t find a suitable one to buy, so I designed this rack. It holds eight tubes with a 14 mm diameter and three larger tubes with a 16 mm diameter. Print with the back…
I designed a dust extractor for my lathe, which attaches to the hand rest via a rod. This allows the dust to be extracted precisely where it is generated during sanding. The connection fits standard 100mm dust extraction hoses. I printed…
This item is for drilling a 2 inch hole into a board and holding multiple size chisels for woodturning enthusiasts.
Protectors for selected spur drives as used woodturning lathes A good spur drive is sharp. It may cut your hand when 'popped' into the taper. Then you kick it out of the taper, it may cut your hand or get damaged when it falls on the…
https://de.aliexpress.com/item/1005005986808041.html?pdp_ext_f=%7B%22sku_id%22%3A%2212000035425740359%22%7D&sourceType=1&spm=a2g0o.wish-manage-home.0.0&gatewayAdapt=glo2deu https://ae01.alicdn.com/kf/Sc00305d77c644a04a9fcfdb391b70b57g.jpg…
