P
PrintablesMartin Kolář
Mogster Mercedes logos for grill and wheels
Model 20 and 21 Mercedes logo
- Pobrania
- 377
- Polubienia
- 39
- Ocena
- 5
Wyniki wyszukiwania: ogst
Liczymy pasujące modele…
P
PrintablesMartin Kolář
3D Sets Mogster light reflector lens
Compatible with Model 20, 21 and 22 Overland! non printed parts needed: Optical PMMA LED Lens Reflector on Ali (i recommend 60 degree) 1W/3W High power LED 20mm star pcb on Ali (1W is sufficient, I recommend warm white for older cars,…
- Pobrania
- 121
- Polubienia
- 24
- Ocena
- 5
P
PrintablesJan (Sláva) Slavík
Hitch for Mogster and Trailer
I make upgrade of Mogsters frame and pole attachment for trailer (Jumbo) from 3DSets. In Trailer you can use longer screw M3x25 instead M3x16. Enjoy it! I make upgrade for Mogster Tipper 4x4, download Stl and change it in 3MF file. :)
- Pobrania
- 116
- Polubienia
- 20
- Ocena
- 4,5
P
PrintablesDH_Beng
3Dsets Mogster Bull Bar mode
Bull bar add-on for 3Dsets model 20 & 21 (Mogster). Printing The bull bar must be printed with support. I printed it in the orientation shown in the picture. Mounting The bull bar is attached to the bumper using 4 M2×6 screws. Either…
- Pobrania
- 112
- Polubienia
- 24
- Ocena
- 0
P
PrintablesAllen Zhu
3D Sets Mogster Overland Towing Hitch Bumper
The 3D Sets Mogster has been my favourite RC vehicle from them so far, with a variety of layouts, a Fusion SE as a standard motor choice, great performance with portals, and a super detailed body with fine details it's been all I wanted…
- Pobrania
- 109
- Polubienia
- 13
- Ocena
- 5
P
PrintablesFelix Schneider
3dsets mogster reinforced portal gear
I kept breaking the portal gear to wich the tire mounts on my 3dsets mogster. So i added 3 m2x30mm screws (20mm should do it too) to each of them to reinforce it. You have to cut the head off the screw so the tire can still mount. For the…
- Pobrania
- 91
- Polubienia
- 7
- Ocena
- 5
P
PrintablesArturis
FroGolF - Tabletop Frog Flinging Frogstravaganza
From the mind behind a myriad of projects he never got around to finishing comes… FroGolF! A tabletop game for 1 to Infinity-1 players ages 6 to 98½! Do you have a 3D printer, some empty table space, a roll of packing tape and at least…
- Pobrania
- 88
- Polubienia
- 25
- Ocena
- 0
P
PrintablesJan (Sláva) Slavík
Roof with lights for Mogster
I make place for lights from Ali in Roof. It is for this lights…
- Pobrania
- 66
- Polubienia
- 19
- Ocena
- 0
P
PrintablesJan (Sláva) Slavík
Spare Wheel Holder for Mogster
I make holder for Spare wheel between Cabine and Bed. Enjoy it :)
- Pobrania
- 64
- Polubienia
- 29
- Ocena
- 5
P
PrintablesJan (Sláva) Slavík
Mogster Stand
I made platform for stand of Mogster. It will working with model 20 and 22. For model 21 will work to, but you will need insert something under the Rear Bumper. Enjoy it!
- Pobrania
- 53
- Polubienia
- 11
- Ocena
- 5
P
PrintablesMartin Kolář
6X6 Flatbed for 3D Sets Mogster
Fits 6x6 Chassis Trailer from the photo is here: https://cults3d.com/en/3d-model/game/3d-sets-unimog-mogster-trailer Battery box:
- Pobrania
- 52
- Polubienia
- 15
- Ocena
- 0
P
PrintablesYangorang
Rounded Safety Cap for Ikea SKOGSTA Dining Table
A little rounded cap I printed to save my shins from destruction by this friggin table.
- Pobrania
- 46
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJan (Sláva) Slavík
Mogster (Overland) Front Bumper for Winch
Overland front bumper for Witch and Towing Eye form Ali. Winch: https://www.aliexpress.com/item/1005007636626511.html?spm=a2g0o.order_list.order_list_main.165.4d6a1802l0I5ow Towing Eye:…
- Pobrania
- 36
- Polubienia
- 15
- Ocena
- 5
P
Printablesomiedude
Silverchair Frogstomp Logo Magnet (8x3mm magnet)
"You say that money isn't everything But I'd like to see you live without it" Been a fan for a long time. Had to represent the boys. Example printed with 15% infill. If you’d like to shoot some spare change or a dollar my way, you can…
- Pobrania
- 33
- Polubienia
- 7
- Ocena
- 0
P
PrintablesEnrico Vargas
Model 20 3D Set Mogster Battery Holder
I did this battery holder to install the lipo battery under the rear box, the chassis has a lot of space there. It will work great if you are not using the box lifter. I did with PLA 0.20mm layer, 4 perimeter and supports. You will need…
- Pobrania
- 32
- Polubienia
- 8
- Ocena
- 0
P
Printablesslavick
Seat belt for 3D Sets Mogster
There are two versions of seat belt. Short one is just scale accessory to make your model more realistic. Longer is intended for driver and passengers. If you need longer or some other lenght, please let me know. I will make it for you.…
- Pobrania
- 30
- Polubienia
- 9
- Ocena
- 0
P
PrintablesMartin Kolář
3D Sets Mogster Flatbed console
If you want custom attachment or just "naked" back. Here is console for filling the gap after the cabin.
- Pobrania
- 26
- Polubienia
- 6
- Ocena
- 0
P
Printablesprintndrive
Trailer for 3DSets Mogster
Summary You can use this trailer in four different "configurations": standalone trailer, no tipping, no lights - just a basic trailer tipper, no lights - uses the same tipping mechanism as the Mogster trailer, no tipping, lights tipper…
- Pobrania
- 26
- Polubienia
- 10
- Ocena
- 0
P
Printablesprintndrive
3DSets Mogster Trailer Coupling
A trailer coupling for the Mogster based on the Original U406 Rockinger 227G coupling. As it would be to complex and fragile to FDM print, this coupling is not automatic and uses a small D10x2mm magnet to hold an M2x20mm screw embedded in…
- Pobrania
- 24
- Polubienia
- 15
- Ocena
- 5
P
PrintablesMR D.
chair feet for SKOGSTA (Ikea)
DIY project. Designed to fit SKOGSTA Chairs from IKEA. Printed in 1.5 hours. 4 different feet covers, which have different angles to match the chair. Small marking added to find feet orientation with F (front) and B (back), L (left) and R…
- Pobrania
- 23
- Polubienia
- 2
- Ocena
- 4
P
PrintablesRich Adlam
Mogster 4x4 rear bumper for trailer hitch
A replacement rear bumper part with holes for the trailer hitch for the Mogster 4x4 with the tipper I did this as a remix, as I used Jan's trailer part which works really well, but their rear bumper part didn't fit with the tipper…
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMartin Kolář
Alternate bed frame for 3D Sets Overland Mogster
Print with 6 walls, 25% infill, PLA/ABS/ASA...
- Pobrania
- 20
- Polubienia
- 9
- Ocena
- 0
P
PrintablesMawrhis
Mogster overland reverse light
Light fits below the existing end light, kept in place using the bolt that holds the end light glass. Printing: Print the casing with back side on the plate. It has integrated support that easily removes after print. Print the glass also…
- Pobrania
- 20
- Polubienia
- 5
- Ocena
- 5
P
PrintablesMartin Kolář
Drop side wood floor for 3D Sets Mogster
I had hard time fitting it in, had to sand sides, but might be the colour i applied. I suggest using X-Y Contour compensation set to -0.08 or more to be safe! some suggestions depending on you desired result: rotate top side to bed and…
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 0
P
Printablesmartijn janssen
3DSETS MOGSTER pulley for 16T 32P (M0.8) pinion
Since I did not have the required 17T M0.6 pinion at hand and did not want to buy yet another part for the MOGSTER build, I designed a pulley to fit a 16T 32P (M0.8) pinion I did have already. Designed based on the STL from the purchased…
- Pobrania
- 18
- Polubienia
- 4
- Ocena
- 5
P
PrintablesAllen Zhu
3D Sets Mogster Overland Bumper Light Mount
A quick way to add super bright lights to the 3D Sets Mogster Overland, just screw 2 M3x6 screws into the light mounts. Replaces the central section of the Mogster Overland bumper
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAndyMe68
Model 20+22 3D Set Mogster Battery Holder
Modifications implemented to accommodate a taller battery without interfering with the lower part of the load box. Set back so as not to interfere with the differential and rear bar resulting from the ‘overland’ modification that allows…
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 5
P
Printablesctheroux
Ikea Skogsta Inner Buckets
These are buckets for the Ikea Skogsta tool box. They were design for my own needs. I designed them to store my various pliers vertically. Nevertheless, they can be useful for anyone. Support material is not required. An infill of 20% is…
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
Printablesctheroux
Ikea Skogsta Screwdriver Holders
These are screwdriver holders for the Ikea Skogsta tool box. One can hold four screwdrivers. The holes are 40 mm apart from each other. This holder is designed to be placed on the right side. The one designed for the left side can hold…
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
Printablesctheroux
Ikea Skogsta Bins
These are small bins for the Ikea Skogsta tool box. Three styles are provided: for both corners and between the corner bins. They are 60 x 80 mm. The middle ones are 60 x 70 mm. You will need to print the two corner bins and three…
- Pobrania
- 12
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSesheta
Nandamonium 38HP console eurorack skiff by frogstompr
Mirror from the decrepit blue site. May remix at some point to add holes for power cable, but here's the original for now. frogstompr's Description: Skiff box to convert the Synthrotek Nandamonium eurorack module to console. Also works as…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSenpapi
IKEA Skogsta Table Space Filler for the Whole table
HermannSW was awesome for this idea and it inspired me to do some of my first modeling! I wanted to make this a somewhat permanent fixture at our table as I love this table, but hate the gap along the center and all the crud that can get…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesHermannSW
Ikea Skogsta table space fill for working on puzzle
Ikea Skogsta table space between top pieces is not good for working on puzzle. Model is single flat 170x20mm layer, with a 1mm thick box on top, 5.8mm high and wide fitting exactly the space. For 3000 pieces puzzle of witdth 115cm I…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 5
P
PrintablesDesign•Slice•Print Studio
ProgStars Series One
PROGSTARS SERIES ONE! This is a set of 6 coasters, each featuring a prominent Progressive Rock Band! Each coaster is 100x100x3 mm with a display holder that features a checklist on the bottom. The STL files are designed to be printed with…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
Printablesromankozak
GoPro mount for 3D Sets Mogster
A simple GoPro mount for the 3D Sets Mogster with retro seats (models 20 and 21). It easily slides into place: tilt the GoPro (you may need to move the seat forward), insert the mount, then straighten the GoPro and secure the mount by…
- Pobrania
- 8
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAllen Zhu
3D Sets Mogster 6x6 Tipper Mod
Well, in the same grain as the rest of my mods, this tipper mod for the 6x6 follows the thought process "I love the 6x6 Mogster, but I wish it could dump like the 4x4". And so, it can! Fitted with the same 3 day dumping system as the…
- Pobrania
- 7
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFilip Šrejber
Flatbed for 3D Sets Mogster Overland
Mogster Overland Flatbed
- Pobrania
- 6
- Polubienia
- 6
- Ocena
- 0
P
PrintablesŠtěpán Civín
3D Sets - Mogster - Portal Gear Reinforced
this is a modified version of the 10 tooth gear of the portals on the Mogster, I added slots on the hexagon connector for metal 3x8mm pins or M2 screws or M3 set screws and also slots and holes for those in the C segment cardan, this…
- Pobrania
- 5
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAndyMe68
Tipper Guard light Mogster
Tips guard for mogster models 20 and 21, designed to accommodate 1/3W LED lights with reflectors. The front lens comes from…
- Pobrania
- 4
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSkater
CR7-Clogstecker
Dieser Clogstecker wurde zum hineinpinnen in die Crocs entworfen und kann in unter 20min gedruckt werden.
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSourceror
IKEA SKOGSTA Screw Cap Cover
Printed with a 4mm nozzle in PLA. Fusion360 source file attached.
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHaBaKuK_cZ
Cooling for Fusion in 3DSets Mogster
Print in ASA/ABS/PETG Required hardware: 2x M3x30 to mount to fins of heatsing 4x M3x14 to mount fan 1x 3010 or 3007 5V fan 1x KSD9700 250V/10A, NO 60°C thermostat this type of heatsink -…
- Pobrania
- 1
- Polubienia
- 2
- Ocena
- 0
P
Printables
3D Sets Mogster light reflector lens
Compatible with Model 20, 21 and 22 Overland! non printed parts needed: Optical PMMA LED Lens Reflector on Ali (i recommend 60 degree) 1W/3W High power LED 20mm star pcb on Ali (1W is sufficient, I recommend warm white for older cars,…
P
Printables
Hitch for Mogster and Trailer
I make upgrade of Mogsters frame and pole attachment for trailer (Jumbo) from 3DSets. In Trailer you can use longer screw M3x25 instead M3x16. Enjoy it! I make upgrade for Mogster Tipper 4x4, download Stl and change it in 3MF file. :)
P
Printables
3dsets mogster reinforced portal gear
I kept breaking the portal gear to wich the tire mounts on my 3dsets mogster. So i added 3 m2x30mm screws (20mm should do it too) to each of them to reinforce it. You have to cut the head off the screw so the tire can still mount. For the…
P
Printables
3D Sets Mogster Flatbed console
If you want custom attachment or just "naked" back. Here is console for filling the gap after the cabin.
P
Printables
Mogster 4x4 rear bumper for trailer hitch
A replacement rear bumper part with holes for the trailer hitch for the Mogster 4x4 with the tipper I did this as a remix, as I used Jan's trailer part which works really well, but their rear bumper part didn't fit with the tipper…
P
Printables
Mogster (Overland) Front Bumper for Winch
Overland front bumper for Witch and Towing Eye form Ali. Winch: https://www.aliexpress.com/item/1005007636626511.html?spm=a2g0o.order_list.order_list_main.165.4d6a1802l0I5ow Towing Eye:…
P
Printables
Mogster Stand
I made platform for stand of Mogster. It will working with model 20 and 22. For model 21 will work to, but you will need insert something under the Rear Bumper. Enjoy it!
P
Printables
3D Sets Mogster Overland Bumper Light Mount
A quick way to add super bright lights to the 3D Sets Mogster Overland, just screw 2 M3x6 screws into the light mounts. Replaces the central section of the Mogster Overland bumper
P
Printables
Model 20+22 3D Set Mogster Battery Holder
Modifications implemented to accommodate a taller battery without interfering with the lower part of the load box. Set back so as not to interfere with the differential and rear bar resulting from the ‘overland’ modification that allows…
P
Printables
Mogster overland reverse light
Light fits below the existing end light, kept in place using the bolt that holds the end light glass. Printing: Print the casing with back side on the plate. It has integrated support that easily removes after print. Print the glass also…
P
Printables
3DSets Mogster Trailer Coupling
A trailer coupling for the Mogster based on the Original U406 Rockinger 227G coupling. As it would be to complex and fragile to FDM print, this coupling is not automatic and uses a small D10x2mm magnet to hold an M2x20mm screw embedded in…
P
Printables
3DSETS MOGSTER pulley for 16T 32P (M0.8) pinion
Since I did not have the required 17T M0.6 pinion at hand and did not want to buy yet another part for the MOGSTER build, I designed a pulley to fit a 16T 32P (M0.8) pinion I did have already. Designed based on the STL from the purchased…
P
Printables
OGstar tracker "camera holder" for 3/8 screw
OGstar tracker part "camera holder" for 3/8 ballhead screw. Just print it with 100% infill (I used PLA) and press in 3/8 screw.
P
Printables
Tipper Guard light Mogster
Tips guard for mogster models 20 and 21, designed to accommodate 1/3W LED lights with reflectors. The front lens comes from…