Liczymy pasujące modele…
I needed a replacement cover for the TTL flash socket on my Olympus OM-4 Ti. You can find some on eBay for 10€ that look nice and are 3D printed. But I couldn't find their 3D model online, so I made my own. It's not as pretty, but it…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
it's a combination of an Olympus OM lens mount adapted to a Nikon F lens mount that i whipped up for my nikon d3000… there is two different versions included with slightly different mounts. i used version 2. i got it to fit with a little…
I did my best to make the Olympic rings!
I wanted to design something to get some weights off the ground since there were some people who worked out who weren't able to go up between different weights on the weight stack on my Rep Fitness FT-5000 function trainer. So I designed…
This is the hotshoe for the EPL Olympus. 100% infill 0.08 layerhigh normal suport
When snapping a photo (preferably in a dim environment), this accessory will enable creating a light projection of the desired shape. It can be adjusted in length via both included canons in order to better fit the needs.
as it is missing the membrane for the required spring I printed it with 2 cantilevers and reinforced the trigger. glue on and enjoy
Battery door lever for the Olympus E-M5 III because it keeps breaking for everyone!! Remixed from @myxfit_28243 's model to fit the E-M5 III instead of E-M5 II Notches are raised by 0.5 mm to accomodate the locking lug + spring see pic 4…
Olympiakos keychain The size can be adjusted in the slicer 25% infill ,quality 0.2 supports no , pla colors can be added in the slicer Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Two handy belt clips for Olympus camera batteries types BLS-1, BLS-5, BLS-50. I use three different PEN camera's which are just great for street photografy but the batteries do not last very long. So I designed these belt clips to…
I made this to help the battery last longer in your Olympus 35 SP - by covering the light meter, the amount of battery drain is minimised. I used some sticky-back tape to stick it to my camera. The door is inserted from the back - the…
Eyecup and accompanying dust cap for the Olympus BTHU2 eyepieces (Olympus WK 10x/20L). I used 95A TPU and it works fairly well. Probably would be nicer in a less stiff and matte textured material. The dust cap fits securely, but is still…
white until 5.8mm red until 6.2mm gold until 6.8mm finish with blue
I had this printed at Detroit 3D Manufacturing via Craftcloud in black PETG at 60% infill (to give it some weight). I have the original E10K (micro-USB), but there is a newer E10K-TypeC (USB-C) which I have not tested, but I believe it is…
I also made RMS Olympic in the 1910's and RMS Britannic when she is a ocean liner (note I said RMS instead of HMHS)
Model of a stand and Olympic rings. The rings can be stacked inside each other. The bottom one must be cut and the others threaded onto it.
This set of parts improves a few minor annoyances I have with Parallax's small robot kits (ActivityBot and Cyber:Bot) and are designed to help the small robot kits preform better in the 2026 division C Science Olympiad event, Robot Tour.…
I needed one so i remixed this. You have to remove the original stuff to put this one
A rough cutting guide for replacing the light seals on an Olympus Pen D2 , it might also work on other pen models. This template eliminates some of the guesswork and should ensures light-tight camera. Recommended Tools: Best used with a…
This Olympic barbell holder is a functional, print‑friendly design built to keep your bar safely off the floor and out of the way. The geometry is optimised for strength, with thick walls, generous fillets, and load‑bearing surfaces that…
Hello, this is the sixth part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 160*200 mm before slicing (i did it so, to make all print at the same size). There is two…
Don't print the cap in white filament, lol, the design isn't thick enough to completely block all the light. Dark filaments should be used. I'd recommend just sticking with black filament.
Hockey pucks with Olympics logo. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection where you can find pucks from all 12 teams/countries from 2026 Milano…
About the design This is a very compact arca-type tripod plate and bottom strap connector designed to fit the Olympus C-5050 zoom. Note - I have an alternative version of this now, which is a bit thinner, has a bit wider base, and a more…
Olympic rings stencil / Olympijské kruhy - šablona
This is a counter weight jig for 2025-2026 Science Olympiad Machines event, useful for actively adjusting the position of a counter weight for a machine. This object does need supports. Height is 9.4 cm, width is 2.5 cm, length is 5.5 cm
Voici une décoration murale représentant les anneaux olympiques avec cinq sports représentés dans les anneaux. La taille est de 23cm X 10cm. Une belle petite décoration rapide à imprimer et qui ne demande que très peu de filament.
a model designed to fit over CDs to give more traction when making science Olympiad projects or just projects.
Free Chibi Greek God – Afrodita! 🏛✨ Grab this adorable chibi mini figure of Afrodita, one of the 11 gods from my Greek Gods Collection! Size: 6–9 cm Style: Cute chibi, big head, expressive eyes, small body This free model is perfect for…
Free Chibi Greek God – Apollo! 🏛✨ Grab this adorable chibi mini figure of Apollo, one of the 11 gods from my Greek Gods Collection! Size: 6–9 cm Style: Cute chibi, big head, expressive eyes, small body This free model is perfect for 3D…
Free Chibi Greek God – Ares! 🏛✨ Grab this adorable chibi mini figure of Ares, one of the 11 gods from my Greek Gods Collection! Size: 6–9 cm Style: Cute chibi, big head, expressive eyes, small body This free model is perfect for 3D…
It is a landmine for various excercises using your 2" olympic sized barbell. Works as a Landmine Base or a Landmine Grip Usage Just slide this landmine over the end of your barbell, and excercise. When you are done working out, use the…
This is a simple lens cap for some of the Olympus pens. It doesn’t fit the original Olympus pen or the pen S. I haven’t done a lot of multicolored printing, so it’s possible that you could fill in the letters completely. However, with the…
Unlike my E-PL6 the Olympus Pen E-PL3 comes without a front grip. So I designed this camera grip, which I found to make an improvement on handling the camera. Looks better too I think. Printing Print with brim if necessary. I printed with…
For using older Olympus lenses on modern mirrorless cameras
I created this filter case to protect my filters for my Olympus 14-42 len (40mm wide). Printed in PETG with Z seam randomized to avoid that annoying vertical line when the printer begin every layer in the same point. It seals properly and…
Peperbus Olympic model I designed to give out at this year's Vastenavond.
Replacement safety switch prodder for document shredders. Works for Olympia PS 53 CC and probably many other models. If you like this design, please consider leaving a ♥heart. Thanks! ---------- Measurements Prodder width: 3 mm Prodder…
Overview Holder for Olympus E-P7 camera with 14-42mm kit lens. Attaches to Honeycomb Storage Wall (HSW) with 4 M3-nut inserts. Cameras lides in from top, right-hand grip facing up. Compatibility Requires HSW M3 nut inserts (included in…
Simple grip to go on OM-D E-M10 Mk.II. Use double-sided tape to stick it on. Two versions available: Non-textured Textured Used bumpmesh.com to apply texture effect. Settings: Displacement Map: Voronoi Scale U: 0.4 Smooth mask: 1 Bottom…
A press-fit end cap for standard 2-inch (50mm) Olympic adjustable dumbbell sleeves. Designed to make loading heavy dumbbells for chest press easier and more comfortable, the wider base gives you a much larger contact surface when resting…
This is a quick design for olympic rings with screw holes for easy mounting.
About the design This is another very compact arca-type tripod plate and bottom strap connector designed to fit the Olympus C-5050 zoom. After using my first design for the C-5050 for a while, I liked how it matched the angle of the…
Spacer for Olympic weight plate tree, Stack as many as you want to get the desired spacing.
Arnold Schwarzenegger - Mr. Olympia - 1975 3D printable model.
Update 8/2/2025: After using this for several months and feeling like it looked slightly off, I re-measured and discovered that the rotation was off by about 1 degree 🤦. I've uploaded version 0 2 9 .stl's and blender files here which fix…
This is my latest attempt to make things watertight for recreational scuba diving. I used most of the knowledge from my previous article and summarized everything in this video: Consider your skills before you start working on this…
The lever on the battery door of my Olympus em5 mkii broke, so what's a guy to do? Why, model a replacement, of course! I'm not sure if other Olympus camera bodies use the same lever or not, but it works with the em5 mkii at least.…
A center marker for the air trajectory build event at Science Olympiad.
Simple olympus teleconverters cover (tc-20 and tc-14). It's little bit deeper than normal covering cap
Olympics cookie cutter for all your sports craving needs ;-) My recipe is : 1 whole egg, 75g sugar (some can be vanilla-flavoured), 75g butter, 200g all-purpose flour. Simple but very good ! You can add lemon zest also for flavor. The…
A remixed keychain of Olympiakos Piraeus (OSFP) Greek Sports Team
Remix of adrian057 lens cap to subtract the Olympus font from the object. This makes the part easier to print without support and also looks great! Original post: https://www.thingiverse.com/thing:2737337 "This is a lens cap for the…
This latch will hold a regular Olympia Cart together when folded. This is NOT designed for the XL cart. You remove the M6x50mm bolt from two of the leg supports and attach this with M6x60mm bolts. The latch snaps on pretty firmly.
Original eyecup and remix source kept snagging on stuff. These models only slightly protude from the viewfinder. Print it in TPU.
Simple barbell holder that straddles at 2x4 for bare walls. I offset the screw holes, used 1/4 lag screws & washers. One side should be adjusted, but it works for me. How I Designed This Measurements based on a Rogue Castro bar and a…
Thought this was gonna be a massive pain to make but it was actually nice and simple Expect a dummy battery shortly
Convert an Olympus OM lens to L mount. No supports needed
This cup design is made as the base support for boom poles clamped on Olympia Tools 85-188 Pack-N-Roll Folding carts. Same as Michael's original design, this version can also be simply slid over the cart lip or further secured by M5 x…
The stylish keychain with a runner's motif inspired by the Olympics is the perfect reward for any athlete or fan of movement. Whether as an award for participation in the school Olympics or as a symbol of the joy of sport, the keychain is…
universal slide holder for olympus BH2 microscope. may work on other models with a mounting hole distance of 36mm.
The famous blade Riptide (Anaklusmos) from Percy Jackson and the Olympians! This listing is for the digital .STL Files ONLY. This particular model was a commission and is a meld of different blade and hilt shapes that frequently appear in…
Breaking Bad Ray Gun Olympics Meme HueForge Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag Print at 100% infill with a layer height of 0.08mm with a base…
This is a replacement for the Olympia XL Cart caster mount. The stock mount takes a grip ring stem, while this replacement uses a 3/8"-16 threaded caster. I printed it using Layer 0.2, Infill 50%, wall thickness 2mm, and no supports. This…
Special Olympics Earrings Patreon Request I print all my earrings and keychains with a .2 Nozzle Layered. No AMS/MMU/Ace/CFS/Chroma needed. Just color swap at layer. Can be made into a pendant and/or Keychain by scaling up. Check out my…
Two sizes, needs support. Printed with TPU. Photo shows the compact version.
Lens hood for M.Zuiko Digital ED 40-150mm F4.0 PRO
This is a 25-50mm adapter sleeve for converting standard threaded barbells or dumbbells to olympic 50mm size. total length is 190mm, thread depth is 165mm. I also made a separate 115mm spacer to cover the remaining thread on my standard…
Recommended fill: 15%-20% Recommended layer size: 0,1 mm for best quality (in the picture is 0,2mm) Recommended size of print: 6x6 cm 3rd place has 2 versions of the octagon rotation, you can choose yourself
Note, This version is now obsolete. See my models page for the updated V2. https://www.printables.com/model/1219421-show-off-your-pr-with-dummy-13-olympic-barbell-set I will leave this here for people who want matching spares. I…
Meant for light weights and the typical cheap 52mm ID plates. Pretty niche design, not sure if it's useful to others, and very much a hack. Don't overload it and definitely be careful not to use it with anyone else running around who…
🇬🇷⚽ 🏟 Welcome to Piraeus, Greece! 🔴⚪ The Georgios Karaiskakis Stadium (Greek: Στάδιο Γεώργιος Καραϊσκάκης ) in Piraeus (near Athens), Greece, is the home ground of football club Olympiacos. It is named after a military commander and…
A replacement for the original LH-49B Lens Hood by Olympus, as far as I know it is only used on the Olympus 25mm f/1.8 lens, but the mount should be compatible with the 60mm f/2.8 macro lens from Olympus. You can use the step file to edit…
Used to mount in the cockpit of a Piper Archer 28
Summary This device can help you make equilateral triangular legs for the Division C Tower Event in the Science Olympiad. This helps people who don't want to sand the legs manually using sandpaper but don't have an electric sander. You…
Recalculated adapter for Olympus PEN-D (32mm lens) Added screw, that can be glued in place. Bottom part is made to fit steel threaded tripod mount from zenit (or some other camera, not sure). Oryginal bottom part would fit also. untested…
A barbell clamp for a 2" Olympic bar with a locking mechanism to prevent it from opening. I've also added ridges inside.
Copyright (C) 2020 Peter Senna Tschudin SPDX-License-Identifier: GPL-2.0-only This design is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A…
Spare case latch for Olympia Carina typewriter. Have fun!
Battery door lever for the Olympus E-M5 III because it keeps breaking for everyone!! Remixed from @myxfit_28243 's model to fit the E-M5 III instead of E-M5 II Notches are raised by 0.5 mm to accomodate the locking lug + spring see pic 4…
PLA was used to print all the parts at 15% infill. PLA USED: Polymaker Marble White CC3D Gold 3DPrintingCanada Standard PLA: Red, Green, Black, Blue, Gray, Orange, Brown The Resources you see are listed below. I adjusted the sizes to the…
I bought a used camera, and it was missing the rubber grip for the thumb. But that wasn’t a problem—I designed a model of the right size and 3D-printed it using soft TPU. I attached it with super glue. It’s been four years now, and the…
A battery case for storing a pair of batteries. Three options to suit: BLX-1 for the Olympus OM-1 and OM-1 II BLH-1 for the Olympus E-M1 mk2 and mk3 DMW-BLK22 or DMW-BLF19 for the Panasonic G9 or G9 mk2. Uses a pair of 10x3mm magnet to…
The display case is inspired by an idea of what Mount Olympus in Ancient Greece would look like and is therefore for the most precious items that you want to display. The files allow for it to be built as either a watch holder or as a…
![RIPTIDE Sword (Book Version) STL Files [Percy Jackson and the Olympians]](https://media.printables.com/media/prints/ae0673f1-3b82-4f69-a901-8783a3fd73e9/images/11139905_6e27c124-8be7-4277-9883-cdb590bbec53_782524cb-4122-480c-94e0-08fe6d06f7f0/listing-graphics_7.png)
![OM system [olympus] 40-150mm f4 pro hood LH-66E](https://media.printables.com/media/prints/1069461/images/8090729_35f85adb-0d3e-46a5-94f7-218335812c81_aaac608d-69a2-4419-b038-27ff7b8aafa1/ca0eb003-61e5-40fe-901a-b40f26f077d8_1_105_c.jpeg)
