Liczymy pasujące modele…
Combine and rearrange single- or multiple-contact Dupont connectors into a same-pitch bridge. Now with multiple row support! The assemblies can be a bit tight, but still much easier to modify than re-populating a dedicated housing. If…
Summary This is a model of a Knight Industries Two Thousand (K.I.T.T.) from Knight Rider in a kit card style. Some characteristic details can be discovered. Equipped with separate spoiler. After printing, the model can be assembled with…
This is designed to hold an ESP32 with pin headers soldered on and allow you to use dupont connectors with it. As the filenames imply, this was built with the ESP32-WROOM-32D in mind, specifically the one from HiLetGo. The main components…
I like my jumper cables to have a tight fit, so i adjusted the lenghts and turned it into a single print object. The Skadis hooks can be pushed into the dovetail connection, but be carefull when inserting them, because it is a very tight…
NOTE: Do not print with supports. The model is designed to print without the need for supports Print settings (example) Rafts: No Supports: No Layer height: 0.2 mm Infill: 100 % Thank you @SpiderGod_2164882 & @Chris_Walnut_3378485 for the…
Big Chill Pontoon boat 1:8 Scale ---------------------------------------------------------------------------------------------------------------- Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non…
NOTE: Do not print with supports Print settings (example) Rafts: No Supports: No Layer height: 0.2 mm Infill: 100 %
This is dupont connector lock for 1-6 pins . There are variants for 12 and 14mm dupont connector. Initially I used PLA, but the connector is fragile and propably wont withstand reusing. PETG is more suitable , because it is more flexible…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store NOTE: An issue has been identified with the…
The Dupont Wire Organizer System was created to assist fellow Arduino, raspberry pie, robotics and rc enthusiasts stay better organized. My cables were always tossed into bins and they were a pain to take out, so i created these bins so…
I wanted a way to keep my DuPont wires together and organized but wasn't a big fan of the big clunky comb-style organizers. So I made my own! This organizer can hold about 20 to 22 wires at a time. The wires I have are about 195mm long…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Printable 40 pin connector for RaspberryPi. You just insert separate cables (goldpin connectors) inside, put locking bar in and voila. You made yourself a working 40 pin connector and got rid of single plug cables. Never connect to wrong…
A slightly completed version and slightly corrected dimensions. (Remix from https://www.thingiverse.com/thing:5167475) This type of adapter can be used for small currents not exceeding a few amps. Maximum about 4 A. Use only with real…
Dupont Cable Management. The fins need to be separated after printing. If you optimize this design please tag me. I would love to see improvements.
Awesome car and I really tried to repair the mesh errors as best I could. But it was really extensive and difficuilt to do. I've saved every file as I went, so hopefully there are enough files here "I've attempted to repair", that some…
1:8 Scale tandem axle trailer for Big Chill Pontoon Boat Big Chill pontoon boat here: https://www.printables.com/model/797773-big-chill-rc-pontoon-boat-by-black-crow…
A simple remix of NERDCORNER 's Dupont cable connector, this now has a male and a female end, allowing you to use two Dupont connectors similar to a micro JST connector or other small electrical connector. The tab and recess arrangement…
This is for those tiny crimp on dupont connectors that fit inside the plugs that plug into the RAMPS board. Tolerances on this are TIGHT! don't feel bad if you can't print a working one. This isn't going to crush the connector tight but…
I was needing a battery holder, and due to my lack of patience to wait 2 days for the order to arrive, it occurred to me to make a very simple model of battery holder that can be used directly with DuPont cables. The model has two small…
2025 - Use improvded remix https://www.printables.com/model/1185210-gridfinity-dupont-jumper-wire-holder Gridfinity - 6 Length, 1 Width, 3u High. For 200mm DuPoint wires. Requires four 6x2mm to hold the bridges in place.
Cache pour Piliers Pont Hornby R8008 Ho 1:87
All sizes of wire holders are compatible with each other Print instructions - wire holder Choose between 100, 150, and 200 mm long Supports everywhere 0.4 nozzle 0.2 layer height 10% infill, any infill pattern is fine Print instructions -…
3d printed Connector for jumper wire (Dupont 12mm) as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…
KITT from Knight Rider, a Pontiac Firebird Trans Am, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
1966 Pontiac GTO Convertible. Another great car. This model was found over at the 3D warehouse. I have tried my best to repair the mesh errors, but it too still has a lot of errors to be fixed. Please re-upload it as a remix if you do…
USB adapter to Dupont "female" version. Be careful to insert the Dupont plugs in the right direction as shown on the pictures. This type of adapter can be used for small currents not exceeding a few amps. Maximum about 4 A. Printing is…
I printed with the open side up. This is a simplified version based on the REV part .
When prototyping things, I like to use the cables with dupont connectors to join up Arduinos and other bits and pieces. I made these to hold 4 to 7 dupont connectors together in a little bundle. You'll need a well dialled in printer to…
14mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/dupont-connector-v1-1/ or https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order: White, Blue, Red. Quick Guide to changing filament~ Have some paper to push away extruded…
Pontiac GTO body, made for open Z V16 model Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not matter PLA Does not matter Notes: It is advisable to print this…
Fully customisable Gridfinity trays to store your (Dupont) cables. I have been using urish 's Dupont Cable Organizer Customizable for many years now and they are an excellent way to store my breadboard cables. Now, I am switching to…
Like my mini crimper but takes advantage of the way 3D printers print in layers to make a much stronger crimper. This should help you crimp those small Dupont crimps so common in our hobby. The Guillotine style allows you to use one hand…
I needed a solution to store my dupont wires, so I quickly modeled these as a solution to my problem. They have served me well! Each holder requires 2 combs to be printed, which are connected with M5 threaded rods cut to length. The…
Realy usefull connector to have a clean way to connect 4 pin dupont/jumper cables. created by Nerd Corner
Just my rendition of the Pontiac arrow head. meant to be remixed into or on anything. Category: Signs & Logos
Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.
Some update from the original. You have 2 versions : one with print all in one but the combs/brush is quite weak one in few part with a combs/brush to mount with strong. (You can reduce the size to 99% to be easier to mount on the base)…
Embrace the spirit of American muscle with this 3D printable STL model of the Pontiac Trans Am. This classic muscle car model is perfect for automotive enthusiasts and fans of iconic American performance, showcasing bold design and…
Hello, just a remix of Connector housing Dupont 4Pin made by NerdCorner user (thanks for the great job) https://www.thingiverse.com/thing:5233256 ; i remix it in order to my needs, means in my opinion a little bit strong and easy to…
Simple USB to Dupont adapter with positive indicator.
I tried several JST adapter models for connecting BLTouch sensor to an Ender 3v2 board. This model prints easy and works great. I believe you could terminate this “properly” but I simply used super glue: >Remove plastic ends from dupont…
Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.
Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.
Parametric Dupont Cable Comb This comb holds Dupont wires in neat, parallel lines so your cable runs look clean and are easier to trace and debug. Designed in Autodesk Fusion and fully parametric. There is one single row version and one…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
LEGO Pontiac Fiero GT 1988
Connector for dupont cables to rgb led strip (plug&play style) for all those who do not want to solder or do not know :), super easy to print, only use 1g
Easy to print, no support required. A quick rub between the fingers with some folded 120 grit sandpaper is all that is required. you can choose from plain ends or those with mounting holes preformed. The stand requires a length of 10 mm…
Remixed - The model has two small notches on each side, large enough for the DuPont connector to be firmly inserted between each battery pole and the model. The cable may be a little tight and require a little force to insert, but this…
Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.
This is a hinged cover for interconnecting Dupont connectors (4-pin). It helps prevent the connector from coming off. You can open and close this cover by the hinge, and locking the cover in the opposite part. Note You can print this…
Sorry to hear about your father Jrockphipps, Hope this car will enspire many memorys of him, Regards Jace Please note this was a detailed model found over at the 3D Warehouse and although converted. It is an untested print and may need…
This is a housing for male inline 2-row Dupont connectors (aka 0.1" / 2.54mm pin headers). It is intended to hold and protect the male side and provide keying to avoid connection in the flipped orientation. There are 2 parts; the housing…
this fits an 8 pin dupont connector. was going to be used for a connection on my printer but ended up not working.
One of my favorite models of car, the Pontiac firebird second generation from 1970-81. Needs glue to attach the axles to the body but should have spinning wheels if done right! I sell these over at my Etsy Shop https://glacierfrost.etsy.com
Resized to fit Elegoo Dupont cables.
This little gadget is small, simple but powerful. I made this one because I needed customized display cables for my projects, which I usually make myself using Dupont connectors. Those connectors come with the benefit that they're pretty…
A simple holder for 2.54mm dupont style connectors. Connector dimensions 2.54×2.54×12mm. If it's too tight, and you are using Cura, try setting horizontal expansion to -0.05mm. The walls thickness (0.8mm) is optimized for 0.4 nozzle.…
Easy way to transform your Dupont cables for JST XH 2.54mm sockets. Print in PLA or PETG. No support needed. Freecad file is included.
To prevent jumper wires with the ubiquitous 0.1" DuPont connectors from inadvertently being pulled out. Fast and simple to print, for 1 to 8 connections, in both standard lengths. Print at 0.2 mm layer height, without supports or brims,…
3d printed Connector for jumper wire 12mm Dupont as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…
Pontiac Fiero Gauge cluster trim print at .2 layer height
In request to Mason Landers Good Luck : ) http://www.thingiverse.com/thing:1972342/#comment-1090357
dupont contact holder for generic crimp tool. I printed with 0.4nozzle, 0.2 layer h. the screw will need to come from the other side, but it still works and makes crimping quick and easy Ideally the pin slot should be pretty tight. if…
Resizeable Jumper Wire Holder, flat heavy base for work benches. ( Not 100% sure the modifier will work outside of bambu/orca slicer )
Printable replacement AC knob for late 90's early 2000's GM vehicles. The AC knobs in late 90's early 2000's GM vehicles (especially the Pontiac Grand Ams) are known for breaking in the center when the plastic gets brittle, I modeled this…
I needed a 4 pin connector to make a WLED strip connection and designed one from scratch using Dupont terminals.
Takes around 4 and ½ hours to print No supports I recommend using hot glue to glue on the parts. There are pins in the back of the pontoons that help line them up to the boat. I just eyeballed the front part of them. Glue on the roof and…
This is my rough recreation of the OEM 2004 - 2006 Pontiac GTO fender badge. I haven't printed it yet so I haven't checked the size. I modeled it from a image of one with a tape measure so the sizing isn't going to be exact. The fonts…
DuPont wires commonly used in Arduino\Raspberry Pis now have a group connector. This is a 24 pin wire block that can be plugged in or out, retaining the order of the wires. Wires can be reclaimed and used for other projects simply by…
This is a remix of https://www.thingiverse.com/make:998505
Connector housing, Dupont 2Pin Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Simple way to hang your dupont crimping tool. Should work with most as long as you hang the tool upside down. Feel free to tinker: https://www.tinkercad.com/things/f3ktpdrg2DT-dupont-crimping-tool-multiboard-holder Print instructions…
A Kit card of my favorite Pontiac Firebird model, the gen 3 1982-92 version. Needs glue for the axle to body connection but the wheels should spin freely if done right. I sell assembled versions over at: https://glacierfrost.etsy.com
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/ https://nerd-corner.com/dupont-connector-v1-1/
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
A mini replica of the aqueduct
this kayak/canoe outrigger stabilizer pontoon is expandable to whatever segments you like use ¾" pvc pipe in the center hole fill-up the cavity with expandable closed cell foam or flotation foam for buoyancy and glue the segment with…
Designed and printed in PETG, but it is intentionally a tight fit so you may have to scale it up a bit for ABS. I am not really good with soldering, but fortunately plenty of vendors offer the Raspberry Pi Pico with pre-soldered and even…
Used in the Soviet army since the early 70's. DPP40 stands for Desantniy (airborne) Pontoon Park, 40t, what is the maximum vehicle weight, the system can carry. I’m not a military expert, but my first idea, when reading about was – if…
I like the changes Funkenjaeger made to the gridfinity DuPont jumper wire holder, but I also like the Gridfinity Ultra Light Bins by HuMa. This combines both.
Connector housing Dupont 4Pin Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
This is a Sketchfab converted and customized model, it is a 2-model pack that consists of: 2009 Pontiac G3 2009 Chevy Aveo Original model: https://sketchfab.com/3d-models/2009-chevrolet-aveo-0b2cf39c664043ccbdb5fa0261ae5644 Happy printing!
This is the clip that goes through the hole in the metal hinge on the silver flap behind the seats that flips up to accommodate the convertible frame when the top is raised on a Pontiac Solstice or Saturn Sky (I assume--I don't own a…
This was inspired by Zack Freedman's Gridfinity project. My take on a Dupont wire holder for Gridfinity. The slots are tapered to hold wires better. I created using Onshape . Added step files for easy changes.
Instead of a regular blank wheel it has a Pontiac logo to make it look better
Pontiac Fiero, firebird, and camaro window switch replacement.
Descripción Diseño de Hernández y Fernández de Tintín a 4 colores impreso con AMS “boca abajo” con lámina PEI texturizada. -------------- Otros diseños: Tintín y Milú: https://www.printables.com/es/model/647590-tintin-y-milu Capitán…
I needed a way to take 4 individual Dupont connectors and consolidate them into a single 4-pin connector. This little piece does the trick. Hope it helps you as well! I included two sizes so use whichever one best meets your needs. STEP…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Based off the RX-8 keychain I made, I designed this for a friend. It has a wide loop so that it is easy to move around on the keychain itself and isn't longer than the key itself. Print at 100% infill for best strength. Let me know what…
Modifications for usability, see differences listed below
Update Feb 17 2025 Moved the original files with a 0.1mm tolerance to their own folder Uploaded new files with a 0.2mm tolerance Dupont connectors are 2.54mm Openings are 2.74mm Added Configurations 1x3 with filled-in center pin (useful…
Bring your favorite designs to life with this high-quality 3D printable LED Light Box STL from GIVEMHEVN . This layered light box is designed to create a clean, professional display when illuminated using an LED light source. The…
Molykote compound and other types of greases sometimes come in tubes without additional nozzles for finer dispensing. It is best printed with PP filament and a .25 nozzle. The model has a brim under which Scotch tape should be put. The…
