Liczymy pasujące modele…
The Universal Peg Board System is a mechanism for printing pegs and the useful part separately. This is a useful part that holds a spray can. It has a railing that keeps it from falling off during a mild earthquake (welcome to…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena jednego wariantu
The second iteration on an assembly made to be attached at the end of a long pole such that a can of fly or bug spray can be operated at range. *Tape pictured is no longer required in the V2 due to the new bolt clasp* Simply attach at the…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Easy to mount spray can holder for 3 spray cans. Printing: Pla 0.2mm layer height 25% infill Remove supports after printing is optional
Wydruk około 5,01 €–6,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder / Wall mount for spraycans with a diameter of about 65mm or 2.55 inches (standard sizes.)
Wydruk około 2,49 €–3,05 € nettoWstępna wycena jednego wariantu
This is my first ever design! I would get frustrated trying to use the flimsy piece of tape used to secure the nozzle for spraycans over and over; it gets dirty and loses its adhesiveness and eventually the nozzle can come loose and get…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
A spray shaker for drill. You can use it with your drill to shake very well your spray. Is standard but parametric, so you can adapt it if your spray has unusual size. Is for M6 screw (parametric, so you can change it) and the hole is so…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Anti splash spray nozzle designed for 10mm lead screws- Can be used on smaller diameter leadscrews too - (Z axis) Designed to fit Tri-Flow PTFE spray Fits WD-40 nozzle or another type spray - as the tube is getting narrow at the end.
Why? Thousands of spray can holders available.. but none made efficient use of the space in depth. So I came up with the idea of mounting the spray cans on the wall at an angle so that the next row overlaps with the previous one. This…
The fellow ode is a great coffee grinder, but it is a bit messy! Misting your coffee beans with a spray of water helps cut down on the mess almost completely. I made this bracket to hold the ground brush and spray bottle I use. I printed…
Fits 1.5 and 1.8oz cans from Sabre / Fox It's a snug fit, shouldn't need any other securing. Though I did put provisions if you wanted to put a third velcro tie around the canister Suggest 0.2 layer height Use velcro ties to secure
Hey! This is a self-protection pepper spray holder for your bike. It fits on bidon screw on your frame. Usually it's mounted on bottom screw of vertical bidon mount. It only uses 1 screw and it's tight fit for the pepper spray. It's…
Stop struggling with paper stencils that tear or bleed under the spray can. This parametric stencil generator creates sturdy, reusable painting templates with perfectly calculated bridges so your letters never fall out. Whether you need a…
bicycle pepper spray 35mm holder with screw or strap fastening
made it myself for art class in tinkercad
Bogg bag type attachment to hold bug spray &/or sunscreen. Tight snap, but the spray bottles can also just slide in - it can be installed horizontal or vertical which ever is the best alignment for the holes. This uses a screw-type…
This is a simple set of number stencils for labeling things like wooden crates with spray paint. The individual stencils can be combined using the connectors. There is a simple connector for just joining the stencils in one direction and…
Simpe design with simple instructions: Print at your own preffered layer height and infill. :) Posting a make and liking the model is much appreciated!
This is the LORD's prayer (Our Father) in the shape of the cross and with the words in Spanish. It prints flat with no supports needed. The model is about 0.5 inch thick so it can stand alone. It does take a while to print because of the…
Organizer/holder for perfume spray glass bottle (5ml). The model can be modified to suit your needs: amount_x: Number of bottles in x axis amount_y: Number of bottles in y axis steps: Number of stands. The file contains two versions, the…
Beside painting with brush and airbrushing, I use some paint spray cans for base coat and some special colours. Occasionally used only, the best way to keep the spray cans operational is to store them in horizontal positions. This…
It is recommended to print two for each floor for more stability. Still not sure that the joint fit perfectly because I have not yet printed the second floor Print with 10-20% infill and 0.2mm layer height. No supports needed.
Holds 5 sample-size cologne or perfume tubes in a 1x1 gridfinity square. Included standard fit, loose, and tight that may be useful depending on your printer calibration and whether the tubes have labels or not. Shoutout to KptnAutismus…
This is a simple spray bottle holder for use with MultiBuild plates. You need 2 of the MultiConnect connectors. Fits bottles up to 3mm wide at the trigger / head. No supports needed.
This majestic 3D model depicts a kneeling dragon gargoyle in a prayerful pose, combining strength, grace, and mysticism. Perfect for fantasy lovers, collectors, or as an eye-catching display piece for your shelf, altar, or desk. ✨…
If you hang this up then you can put stuff on this
A striking low poly praying mantis sculpture made in a clean 3D printed style, designed with sharp geometric planes and a bold insect silhouette. Set on a leaf-shaped base, this modern decorative piece brings a fresh nature-inspired look…
Wall mounted spraycan holder, with spot for magnet for better can stability.
A compact, 3D-printable module that automates pressing the valve on a spray bottle using a servo motor. Key Features: Universal Design: Works with most standard freshener bottles. Easy to Print & Assemble Fully Controllable: Use an…
This will require supports. I printed PLA with auto-generated PETG supports, Organic style and 0 (soluble) as Top contact Z distance. To use less support material you can print the holder lying down, if you can deal with the large…
Simple spray degreaser holder
I like my cologne to be more subtle, and a single spray was still a bit much for me. This ring fits under the nozzle and blocks it from fully depressing. The nozzle should pull off easily, and you can slip the ring into the space under…
A small color tag for your nasal spray bottles. Useful in this flue ridden time so you and your family members don't switch it up accidentally. I used PETG so it snaps on nicely.
Spraycan Wallmount Holder (3 Cans) Inspired by an existing design, but I fixed the flaw: side-pulling cans needed empty space on one side. My shorter cradle lets you lift cans straight out – no side clearance required! Two versions…
Terran spraypaint pattern Size: 200 x 200 x 2,5 mm Material: rPLA Nozzle: 0,4 mm Perimeters: 2 Infill: 100%
Should be a super easy print no supports needed lay flat with graffiti bass facing towards the build plate This design is gridfinity-compatible credit to Zack Freedman for the original graffiti system
Thought I would design a sponsorship from the alternate reality of Helldivers 2 where Nike may sponsor the helldivers? Turned the image into an outline that could be used as a spray paint mask. Daft idea, a few little mistakes but I think…
The Tennis Player version of the stencil insert comes with extensions that fit into the grooves of the golf ball stencil holder. Explore other stencil designs Usage Using the Golf Ball Holder V2a,b or Golf Ball Holder (V3) model it is…
Hockey Player version of the stencil insert comes with extensions that fit into the grooves of the golf ball holder. Explore other stencil designs Usage Used with Golf Ball Spray Paint Holder Jig and either regular spray paint or airbrush…
Quick drawings for 3 x 7 cm and 4 x 5,3 cm spraycans and bottles.
Description This is a replacement holder for the pull-out spray of the Blanco Sonea faucet. It sits on the magnet and holds the spray head in place. The original part is not available as a spare accessory. I modeled this part myself with…
This was designed around the libbey 12oz all purpose mug.
Made these for a local school for their Homecoming float. They were Kindergarten Exterminators. So I figured since it used glow sticks it would make a good safety light for some trick-or-treater. The parts are printed as such. Tank Top…
A spray shaker for drill. You can use it with your drill to shake very well your spray. Is standard but parametric, so you can adapt it if your spray has unusual size. Is for M6 screw (parametric, so you can change it) and the hole is so…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits one Spray Bottle. Prints without supports. Uses full-size T-Clips . Maintains its orientation on the Skadis board via a protrusion on the back that slot into the Skadis holes. I tested with several different spray bottles at home and…
An insert for the BaBo System, created by https://www.printables.com/@Willi . This insert is designed for the BaBo Duo 60 mm drawer to store a 400 ml can of 3dlac adhesive spray. Print twice, it's mirrored. There's a bolt and a…
Assembly For assembly you'll need one M3 screw, anything between 8mm and 30mm length
Spray can holder, i use it for WD40. Internal diameter 70mm Printer brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 30%
Small wall mount for a spary bottle with a diameter of 78mm. You also need 2 screws 3x16mm to connect it to the wall. I printed it in PETG Kleine Wandhalterung für einen Isopropanol Sprühflasche mit einem Durchmesser von 78mm. Man…
Printed from PETG, 3 perimeters, 20% infill, 0.25mm layer height.
Paint Spray hexagon stencil 10x10 cm for example to painting guns or accessory Print settings Layer 0,2 4 walls 15% infill no supports
Paint Spray hexagon stencil 21x21 cm for example to painting guns or accessory Print settings Layer 0,2 4 walls 15% infill no supports
Here are parts capable of mounting a common 66mm diameter spray can (i.e. wasp poison or spray paint) on a 20mm to 30mm pole, with a thin rope or string to actuate the spray. NOTE: Most wasp spray is not designed to spray with the can…
This is a replacement upper spray arm locking pin for the KitchenAid (made by Whirlpool) Superba dishwasher, model KUDS01DJWH0 (and possibly others using the same friction-fit system). The original part is discontinued, so I…
Print in place no screws make sure it fits your cans and pull the can strait out don't bend it up i press my thumbs in the front of the holder. Perfect for rattle cans so you don't get paint on your hands.
There are many holders for storing spray cans vertically. I wanted to install my fire extinguishing spray under the cellar stairs, where it only fits horizontally. I couldn't find anything for this. Here is my solution. For spray cans,…
This majestic 3D model depicts a kneeling dragon gargoyle in a prayerful pose, combining strength, grace, and mysticism. Perfect for fantasy lovers, collectors, or as an eye-catching display piece for your shelf, altar, or desk. ✨…
The connection from the trigger inside the Vileda 1-2-Spray mop broke so I designed a new one. It’s my first design in Fusion 360. It is mainly functional. I added the Fusion file so feel free to edit it. I printed it on an Ender 3 V2…
Design Concept This holder is perfect for keeping aerosol cans such as insect repellent, spray paints, or air fresheners conveniently accessible and organized on the Multiboard or Honeycomb Storage Wall System . It is ideal for use in…
Simple Extension to have the Sprayer a bit higher. Fits the 4.6mm line. I used ASA as its fairly thin and will be used outside.
With this spray can attachment, the chain can be evenly sprayed on all sides. The attachment can be mounted onto standard spray heads and extension tubes. Inside the attachment, the liquid is distributed through channels to 6 nozzles .…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
FR : support de spray mural , en deux partie pour que les vises ne soient pas apparentes. EN : Wall-mounted spray holder, in two parts so that the screws are not visible.
Spray bar attachment designed to fit aquario neo lily pipes 12mm. Designed for low flow for shrimp tanks. The actual dimensions it fits is 13.2mm OD. I have two iterations of this, one with some additional reverse nozzles for even lower…
A small cap to fit the glade wall sprayers to keep the front from opening.
Golf ball spray paint jig that can paint up to 7 golf balls with stencil patterns at a time using compatible stencils (below). Ergonomic design makes it easy to open and close jig assembly to better grip and hold ball in place while…
Ryobi 18V ONE+ Power Sprayer Wall Mount (P2800) This wall mount is designed specifically for the Ryobi 18V ONE+ Power Sprayer , providing a clean, secure way to store your cleaning sprayer when not in use. Perfect for garages, utility…
Wall mount holder for IKEA Myggspray motion sensor. A flexible wall mounted than the one that comes with IKEA Myggspray sensor. I have also made a holder for clips and a wall unit without holes. All based on the remixes that have been…
Summary This is a spray can holder with brackets to be used on a IKEA SKÅDIS pegboard. The holder has a 66 degree tilt and is stackable sideways (and of course vertically, depending on what bottle you are using). The holder comes with a…
I wanted to get my 3DLAC spray can off the table and looked around for Honeycomb storage made popular by RostaP. I found this one by @thesambu and wanted to modify it to hold my aerosol can. It was 50mm so I bumped it to 54.5mm to hold…
This is the changeable nozzle for the Harbor Freight air texture sprayer 2471, which is probably a decade old. The current model number has changed, but I suspect the nozzle fit is pretty much the same. The file is done in openscad which…
Spray Can Holder for US General Tool Carts from Harbor Freight. Holds 4 standard cans. Has slots for magnets, but not really needed. They snap on the side of the cart pretty tight.
this is the nut for an upper spray arm in a Kelvinator dishwasher. It will also, more than likely, fit AEG or Electrolux models. I designed it because I could only find models that had 4 notches instead of the 3 that I need.
OPTION: With or without supports Self-administerable portable single eyewash station. Crossover water flow for maximum eye surface exposure and water pressure. Adapter point accommodates standard commercial water bottle openings for quick…
A TPU gasket for helping seal the Wiley-X SG-1 glasses against chemical agents such as teargas or pepperspray. The SG1 glasses/goggles are great for ballistic protection for protestors/observers, and are one of the only ballistic glasses…
Beschreibung Dieser Spraydosen-Halter wurde entwickelt, um Ordnung in das Chaos von Lack-, Reinigungs- und Schmiermitteldosen zu bringen – ohne wackelige Regale, ohne Umkippen und ohne Gefummel. Das System besteht aus einzelnen,…
This mount holds a spray bottle up to 3-3/4" in diameter. It can be printed with no supports. It measures 3.94" high and has two mounting thru holes. I printed mine in PLA with 10% infill and 3 perimeter layers.
Description This is a replacement holder for the pull-out spray of the Blanco Sonea faucet. It sits on the magnet and holds the spray head in place. The original part is not available as a spare accessory. I modeled this part myself with…
This is an advanced bear spray safety that can work with all bear spray cans. Very useful for small outdoor businesses that need a way to solve to problem of tourists thinking it is bug spray, that they will actually need it, etc. It has…
This model will (hopefully) re-bond a sprayer with a broken neck (when it breaks right above the cap). For broken thread see the link below. This model may be snug. The inserts should meet and produce a closed seam. If you have problems…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
I built an airbrush spray booth using white cardboard sheets. I designed this air filter to pair with a computer fan to exhaust the paint fumes.
Designed in Shapr3D - I needed an Expo marker holder that could also hold the spray bottle. Here are the magnets that I used for the back. Just a little hot glue will hold them in place. :…
This model is a banana cleaner that screws directly onto a standard shower hose . It is designed to clean bananas by directing water jets from the outside toward the inside , helping to rinse the peel evenly and efficiently. The cleaner…
A compact, 3D-printable module that automates pressing the valve on a spray bottle using a servo motor. Key Features: Universal Design: Works with most standard freshener bottles. Easy to Print & Assemble Fully Controllable: Use an…
require 20mm x 4mm magnetic, may need some glue to keep magnets in
Inspired by the spray bottle holder from Practical 3D Prints , I made a hook mount for my kitchen cleaner spray bottle. Although inspired, it's a new model from the ground up, to suit my needs more specifically. It uses the same amount of…
This wall-mounted spray paint holder keeps your cans organized, secure, and easy to access in any garage or workshop. Designed for strength and space-saving efficiency, it’s a durable and practical 3D printed solution for clean,…
A prayer card that is to Jesus the Son of God. The prayer is, Jesus, I love you. I'm sorry for my sins. Thank you for being patient.
The original caps on 3DLAC Adhesion Spray easily cracks. They are also made with PP and cannot be glued back using regular super glue. Here is a handy replacement. Modelled in Autodesk Fusion 360 and fits perfectly!
I keep most my cans in a box but there is a few including spray adhesive and primer that I use regularly so I started looking for some wall mount solutions but nothing really caught my eye or used too much filament so I overdesigned and…
Easily resizable sieve to fit your bucket 90 mm diameter 135mm height
The flat bottom improves print bed adhesion and ease of print/quality by removing steep overhangs in the 1st couple of layers (see slicer image).
