662 modeli
This HyperCard Prototype is a futuristic concept vehicle brought to life using AI-generated design. Featuring aggressive aerodynamics, bold curves, and sleek detailing, this model captures the essence of next-generation automotive…
Wydruk około 3,27 €–3,99 € nettoWstępna wycena jednego wariantu
This is a prototype enclosure for lumbar puncture simulator. It uses 3D printed lumber spine anatomical model from ALiEM. It is designed as an alternative simulator enclosure when the silicon for molding is not available. Manufacturing…
Wydruk około 3,42 €–4,18 € nettoWstępna wycena jednego wariantu
This device is a prototype only. Use at your own risk. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 6-7 hours Slicer settings: 0.25mm layer height, 3 perimeters, no supports needed Post…
Wydruk około 14,22 €–17,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Be one of ten who leave a Like at Printables and support me with it :) Prevents cable breakage at the housing outlet and rubbing on the Y-axis motor. It can be attached to the underside of the housing and to the recess for the stepper…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips Edit: Replaced entryPlug, Kata, Blade, Tri in the armor part, very minor changes so less glue required. Added frame-head because I forgot to upload…
poppy playtime 5 prototype
This proof of concept mechanical counter uses an internal index gear - which hides the entire mechanism. Mix and match optional parts to construct a counter of various lengths and input styles. https://youtu.be/M1kdm8jpN80 Customization…
It´s a prototype, but everything works as it shoud. Have fun with it! Print instructions Print the Boat verticaly in 0,15mm Vase Mode. Print the shaft standing up, chamfer downside with brim.
Andor Tie Avenger Prototype : Andor 2 : Star Wars Please consider finding a better orientation for printing. And if you do find one Share.
This is just a simple, lowpoly model of 2020 V-Slot Aluminium Extrusion/Profile. Designed using the dimensions from the attached screenshots. Have fun using it in your own projects :-) Category: 3D Printer Parts
Goal of the design: I got tired that my Arduino prototypes were so difficult to move, and that the jumpers were always being ripped out due to the board being separate from the breadboard. The goals for this design were; Easy attachment…
Model of knife based on description on https://www.knifeplanet.net/are-otf-knives-useful and https://www.youtube.com/watch?v=RtuXzDqRV For assembling is needed 4 screws M2-10 rubber wire
This prototyping board is designed for Arduino and ESP32 development. It fits both a large and a small breadboard, providing a compact and organized workspace for your electronics projects. Whether you're testing circuits or building…
I needed a 3D model of a head to size other models so I remixed this one.
Description Still a prototype design but usable enough to upload so others can get use out of it. Designed to be compatible with the Ryobi Link storage system. Feet on the bottom of the bucket are designed to interface with the recessed…
A mockup/replica/prototype of the just released 2024 M4/M4 Pro Apple Mac mini. This model aims to be accurate, but has been modeled entirely from the few images that are available right now. Once the device ships, I'll update the files…
Early development prototypes of 84mm payload modules designed for the Simple 3D-Printed Water Rocket Launcher project circa 2023. Siloed from main project and here mainly for historical interest. Designs for 0.5L Polar Seltzer bottles are…
This is a new 3D printable prosthetic foot with the connector to pylon used on conventional prosthetics. It has the ankle joint and flexible fingers to achieve better walking dynamics. The design was made in Autodesk Fusion 360 and was…
Hi, Today's upload is a 3D printed PC Case , here is the specs: Supports up to ATX sized motherboards . Standard ATX power supply . GPU size up to 295mm 3x 120/140mm fans in the front, also support up to 420mm AIO. 2x 120/140mm fans on…
Want to prototype levels for a game on paper, but it always turns out to be a scribbly mess? Already 10 hours into a game jam and your artist still hasn't finished the tileset? On the go and got a killer idea for a level? This stencil…
This is a repository of .stl files that were used in the creation of a prototype axial flux synchronous reluctance motor. The video showcasing the motor can be found here: https://www.youtube.com/watch?v=SNQVJudd6BU Since the reluctance…
By day I'm the CTO at a big-name media company and I wanted to design a tool I'd actually have my own designers use for quickly mocking up their app and mobile web ideas. This template is scaled to the size of current “large” smartphones,…
A kwok is a type of tool that makes a sound that attracts catfish to it
prototype---> dummy 13
hey everyone, I know you have questions on how to make the legs so, here it is: you need to assemble it like this: note: I found it easier to build it WITHOUT putting on the lower leg armor.
This 3 color print makes a nice shiny mega Rayquaza! Also adds slots for press fit 6x3mm magnets! Using red, black, and white. But feel free to add more colors to it! I recommend using a small nozzle and a small layer height so that it…
Prototypová třívozová jednotka 560 přezdívaná Tornádo. Skládala se z hnacího vozu, řídícího vozu a jednoho vloženého.
Experience the cutting edge of motorsport technology with this 3D printable STL model of the Porsche 919 Hybrid. This Le Mans prototype racer model is perfect for motorsport enthusiasts and fans of endurance racing, showcasing innovative…
This futuristic sneaker is a bold concept piece for fans of experimental design. Inspired by a fusion of alien organics and tech aesthetics, it’s perfect as a visual statement or collector’s item. ⚠ Note: This model is very difficult to…
Info This prototyping board is specially designed for the Elegoo Arduino Mega / Uno starter kits, and their breadboards. For the Arduino Uno, the small adapter plate is printed in addition to the board. The two Arduinos are attached to…
I made improvements over this one and felt that it's okay to release this version now. Please do not use this for profit. units are in inches! Here's a video of me showing off the model printed at shapeways :) Category: Sculptures
Unleash the future on your printer bed! These ultra-futuristic, euphoria-inducing shoe designs feature a bold silhouette, floating sole chambers, and organic ventilation cutouts – perfect for fashion experiments or decor. 🛠 This is a test…
Feel free to modify this! Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: 3D Printing
A nice solution to create Prototypes in a nice and clean way. You can mount up to 6 DIN rail (minimum requirements: 3 for stability). If you mount 6 DIN rails you need 12 pieces of M6x14mm Bolds and 12 pieces of M6 Nuts. Printing: The…
These claws are old (and now mostly abbandoned) prototypes. Some assembly required. Some instructions for the V1: https://youtu.be/3NsKxkwMgOo
To break this into pieces & print on my MK3 would be a wreck and it can't get smaller due to the size of the ball so here we are. It's designed to print without supports. You = A new Prusa XL owner with nothing pressing to print. Me = A…
Offset Jig for quickly positioning and drilling holes for cutting board or woodworking projects. Holes at 1/2" increments from 1/2" to 3". Check out pixelstoprototype.com for projects or to purchase a physical print!
Needed a stand at my desk for work so i created this. Four sizes for a desk stand utilizing DIN rails. Easy print just requiring printing of two equal parts, and using DIN rails of your required length to piece it all together. Strong…
This model does not work and is currently not in development. I made this some time ago, because i wanted make my own cheap red dot sight. https://www.tinkercad.com/things/jTnmEr25lEZ-airsoft-reflex-sighteotech-512-prot TLDR: bad idea If…
THIS IS A PROTOTYPE This is a set of a TKL (normal size, full height TKL 80%) and matching NumPad. Both consist of a plate, on which the switches are mounted, a "pcb" on which the hot swap sockets are placed and a base, in which the USB-C…
This futuristic foam-style shoe combines ventilation, comfort, and bold aesthetics – perfect for summer lounging or as a visual concept. The design features full-perimeter perforations, a contoured heel, and a softly sculpted sole…
UCI's own version has been released! The same day I posted this I got the link for UCI's own version: https://www.uci.org/equipment/bh2JJzw1eB0n876rX2iB1 This will take you to the “Equipment” page. Scroll to the bottom and expand “UCI 3D…
These are 3D printable parts that are designed to allow FRC teams to quickly prototype mechanisms. They are inspired by the various other 3D printable prototyping systems such as HYPEblocks, Quick Build Connectors, Protopipe, etc.…
Update: I remeshed and thickened the body. I also integrated the rear panel, headlight covers, and mirrors. Should print better now. The original car looked cool so I reduced it to what I thought was about 1/32 scale. Made the body 1…
This is my 3rd attempt at an open-air PC Case that fits a Micro-ATX motherboard a SFX power supply and a graphics card with a length of 245mm, 260mm, 275mm, 285mm, and 300mm. I have printed this model to get the sizing right but still…
This is my ventilation prototype, using 2x old 12V 140mm computer fans, that I release early due to some requests. Don't expect this to be an easy print or project, but I don't have time to clean everything up. It is fully operational…
Hi, this is a prototype of a vacuum robot gripper that creates its own vaccum using the venturi effect . It weighs around 6 g and can lift things up to 1.5 g (I just blew into the air intake) EDIT: @DickF tested it and was able to lift…
These nut inserts/addons correct the pitch of the open notes, making tuning easier and intonation more precise. This is a prototype and it works for me. YMMV, edit the source code to adapt to your instrument. There's one macro for…
The Historical Chess Set Series #1 - Man Ray's 1945 Abstract Wood Chess Set Man Ray, a prominent American artist and a key figure in the Surrealist movement, created his 1945 Wood Chess Set design as a functional piece of art. The chess…
The MMS/Picatinny Locking Lever! Flip the lever on the side to release your MMS Module or Picatinny Rail product! THIS IS A PROTOTYPE. IT MAY OR MAY NOT WORK FOR YOU. Instead of pushing a pin in and out, you can flip a lever really quick…
This linear rail is meant to be a rough representation of an actual linear rail. The replica's carriage slides along the rail, but may be lacking the smoothness and may have a bit more play than the actual thing. That being said, the…
An old (and now mostly abbandoned) prototype. Some assembly required.
Instructions: 100% infill, Layer height 0.15 for the first layer, 0.2 for subsequent layers, using a 0.2 nozzle. Model based on Loft Studios. Please comment and correct any errors.
These files are intended for a system to make it easier to swap faces on the Bachmann Thomas. I'm using the Anniversary LBSC 70 Thomas seen in the 2015 movie The Adventure Begins, but a regular Bachmann Thomas should work just fine given…
This is a remake of these crazy mercedes concept rims for Kyosho Mini Z MA-020 AWD rc car. Might be a bit more tight than the original ones, but I think its better for driving. Print in the same orientation like you see in the pictures…
Car/Truck Air Vent Prototype for your needs. I Printed with PETG for flexibility Supports: Yes, Just the Vent Dimensions: Resolution: 0.2 mm Infill: 15%-20% Brim: Yes, Vent/Frame STEP 1: Put the Flaps into the holes Make sure the flap…
This is the prototype of the improved version of the Orbiter Filament cutter, which is based on the Sherpamini cutter. I reduced the play in the mechanism and designed a better support for the lever. I tested the function of the cutter by…
This is a 3D printable dummy model inspired by the iPhone 16 layout. It was created using publicly available dimensions and reference images to match the look and general shape of the device. Best Used For: Prototyping general accessories…
Arduino prototyping platform to test and experimant
I have designed 2 adapter plates for the Kobra Go to attach a drag chain (designed by aroo ) to the print head and beside the extruder. I am using 15 individual links (with a 30° angle) that I enlarged to 110% to ensure enough space for…
System for supporting your dust collector hose out of the way of your CNC. This solution utilizes EMT conduit that you can purchase at your local big box store and 3d prints to support and keep the dust collection hose out of the way.…
This is a prototype for a nema 17 size cycloid gearbox with a reduction 1/28 you need 2 ball bearings 608 4 M3x35 4 M3 nut 1 M3x12 1 M8x ... Output shaft a nema 17 stepper motor with 5mm axle and some washer things to do : calculate the…
Combat Carrier Prototype 99A as inspired by my novel “Mongruxx - Until we cross this bridge again" Book 4. A semi-sentient broken down combat bot, Weaponeer 259 builds. His cavalcade included seven of these vehicles. In the dark,…
I wanted a wallmount for my mini helmets and everything I found was not really what I wanted. So I tried making one myself. It is one piece and not multiple ones you have to fiddle together which is what I wanted. I think it works quiet…
Just a simple solution to hold your blank prototyping boards. It takes a 2x3 piece of Gridfinity real estate and is designed to hold: 10 2x8cm boards 10 4x6cm boards 10 3x7cm boards 10 5x7cm boards However, it can hold any board that can…
For everyone who is excited or curious about the upcoming wide foldable: here's your chance to see, if you like the size and form factor. The model is based on the most recent (end of march 2026) leaks. It may be a bit on the optimistic…
Based on Wall-e companion M-O scrap your bed with style. Supports required Shaft is 3.4mm vertex to vertex, so you can create your own adjusting tolerances if needed. Enjoy it as much as i did designing it and STAY CLEAN!
prototype--------->dummy 13
Sample model is made by PLA filament. Filament color : gray Model diameter : 14cm
So here we have the files i have been working on since the end of September 2018, when Black-belt shared the link to there on shape cad model. So i downloaded their model and imported to F360, then i set to work in organising, and making…
So I'm in the process of designing a left handed version of the Logitech MX Master 3 since I've long given up hopes for Logitech to ever cater to the left handed marked. (for now I still think it's doable with only a donor MX Master 3 and…
Case project for an ElectroCookie Prototyping board and barrel plug for small electronics projects. The case halves are held together using four #4-40x1/2inch machine screws. The holes are just large enough for the screws to tap into the…
This model can be used as an inexpensive and configurable breadboard alternative, with the advantage that the components can be soldered in-place. Print instructions Important Notes You need a 0.25 mm nozzle to print this The electronic…
This is a remix of the Game Prototyping Stencil , except it's now designed to hook into and stay attached to the rings of a wire bound notebook. This prevents it from getting lost by sliding out of the binder. As in the original print,…
Note: This model was imported from Thingiverse where it originally used the “Customizer” add in. Fear not, it can still be customized by downloading the .scad code and open it using OpenScad! ------- Hats off to AndreasBastian's…
Update: Added 3in, 4in 5in, 7in, 8in, 9in, 10in, 11in and 12in Update: Added an 8in version of the beam. A 6in series 10 compatible beam for rapid prototyping. The beam has holes positioned at 0.5in from both ends as well as in the center…
For more information please check out the related video on my YouTube channel.
Introducing the Gritty Grate Clay Tile & Coaster Press and Drying System PROTOTYPE by yours truly. This system is best printed in FDM or SLA with a build volume of at least 147mmx147mmx140mm. I've printed these out of PLA+CF, PLA, and…
Resolution: 0.2 mm Supports: not needed Assembly: The “Gearshift” fits in the middle
Its a blank case that fits the prototyping board. You have to make your own cut-outs to fit whatever you are building. Only a new blank protoboard fits in this as it is.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This baby is a very cute integrated circuit.
Prusa box is an enclosure for Prusa mk3s mk2s mk2.5 and Prusa mini. Is made of : Brushed stainless steel part (include in kit) PMMA clear glass (include in kit) printed part Our design is currently under development and we are…
Metriccano is not only a good toy, but it puts the “rapid” back in “rapid prototyping.” There is a library of parts based on 10mm centres that can be fastened together with ordinary M3 screws and nuts. While it looks like a construction…
To try to come up with a design for the mechanical counter competition, I came across the classic mechanical counter design used in automobile odometers and gas meters before electronics took over the market. You might want to incorporate…
This is a shroud for an ender 3 direct drive. It is a prototype, and may require some modification for your setup. It works well for me. This was never meant to be public, so download if you dare. Screws in with one screw and friction…
This is a stand when used with some DIN Rails makes a useful electronic prototyping rig. You will be able to move your prototypes easily with it. In the picture, the bottom part of the stand is 20 mm higher than the height in the supplied…
This is an extremely basic crossbow; it's a bit “problematic” from the viewpoint of perfection, but just don't break the body, and everything will be fine. :)
Sturdy connector block for wago 221, I use it for temporary connection to mains when repairing or prototyping.
A multi-functional prototyper setup for an Arduino Uno containing the most needed electrical components for prototyping and breadboarding for your favorite Project. The design is based on the Prusa Control Unit of the Mk3s. I got sick and…
Some of the Community want my Carriage for the Voron 2.4 R1 with Dual Rails. Attention: Its for the MGN9 DUAL Rails for Klicky with X Endstop. You can see the Carriage here: This is a early Prototype. I struggled with the modifications…
Arduino Breadboard Prototyping Plattform für Arduino Nano (mit Schraubterminal) und Arduino Uno. Statt mehr oder weniger lose Teile auf dem Tisch, lassen sich Experiment mit Arduino stabil auf der Plattform fixieren. Dazu ein Breadboard…
If you print in the orientation provided, you shouldn't need supports. Also included in the photos is my Housing for the VL53L0X Time-of-Flight (TOF) sensor . This case / project box is designed to fit the ElectroCookie Mini PCB Prototype…
Nice Prototyping board for Arduino Uno or other Arduino Boards Print Settings Printer: Sparkcube Rafts: Doesn't Matter Supports: No Infill: 20 - 40 % Category: Electronics
A breadboard plattform made for three Busboard BB830 breadboards (others should fit too), of which two have one of their power rails removed. This allows the board to be used with most ESP32 prototype boards, since they can be plugged…
This model is what I would want to see on RC4. It is a revised version of face shield RC3 from Prusa based on the feedback I received from several doctors. Additional features are as follows: -Slightly inclined front plate to cover…
This is a spacious case designed for the Raspberry Pi Zero and Zero W. Especially useful is the external SMA antenna mount. I have modified my rpi0w to use an external antenna by soldering a U.FL connector to the provided pads next to the…
The Maxx Schlappen is a futuristic slide inspired by the legendary Air Max sole design, reimagined with bold curves, dynamic cutouts, and a high-tech look. Whether as a display piece or a test print for wearable exploration, this model…
This a 3d model is of the RTX-65 Guntank from the Gundam: The Origin Manga and Anime. It's designed and already scaled to be printed at the scale of a regular High Grade figure (1/144). This model took me a bit of time to put out,…
UPDATE 2: two new stronger spring files added, to be tested spring v2.1 and v2.2 UPDATE 1: tested with a scale and with spring v2.0 I got 3kgf with a lever of 6.9cm which is about 2Nm torque, not as strong as I thought but the spring can…
![Small Parts Bin Compatible with the Ryobi Link System [Prototype]](https://media.printables.com/media/prints/233897/images/2123283_5c804aa8-d15e-4242-8fac-1b2418603469/r-link-bucket-cover.png)
![Gundam: The Origin — RTX-65 GunTank Early Type (HG Scale) [PROTOTYPE]](https://media.printables.com/media/prints/1478342/images/11139477_88bbfdff-203f-4b0c-9676-f49c095d6316_ee836a15-7cdc-467b-a6e5-67bfeaaf146d/large_display_img_0484_1478342.jpeg)
